AA+Unideck.pdf
-
Upload
douglas-taylor -
Category
Documents
-
view
212 -
download
0
Transcript of AA+Unideck.pdf
-
2004
improvements to its technical data or products. Issued Feb. 2011
Fully insulated
Lightweight, superior spanning capabilities
Advanced climate control
install & maintain
Premium BlueScope Steel Colorbond Permagard White in Microban for antibacterial protection
Meets AQIS food industry standards
safety standards BCA Group 1
10 year warranty* * Subject to warranty
and maintenance conditions
When it comes to
one name stands out . . .
Leading Insulated Panel Projects across Australia since 1963
PRODUCT INFORMATION www.australaustralia.com
-
THERMAL PERFORMANCE (SL Grade EPS core )Panel
Thickness (mm)R value
(m2K/W)U factor(W/m2K)
Weight (kg/m2)
50 1.32 0.76 11.0
75 1.97 0.51 11.4
100 2.63 0.38 11.7
125 3.28 0.31 12.1
150 3.95 0.25 12.4
175 4.61 0.22 12.7
200 5.26 0.19 13.1
250 6.58 0.15 13.4
Orders for panelAll Unideck panels are manufactured to order (the minimum order being 200m2 at 3000mm length). Orders should state your requirements, including preferred colours and internal profile.
SPECIFICATIONS AT A GLANCECorePanel cores are self-extinguishing grade expanded polystyrene Class SL, manufactured to Australian standards. Steel skins are bonded to the core under pressure using a two-part thermosetting polyurethane adhesive.Other specialised cores are also available on request.SkinsThe external weather skin of Unideck is standard at 0.60mm with 42mm upturned edges to form the weather-joint. The internal skin is also 0.60mm. thickness with an optional profile. Panel skins are available with a choice of steel: Colorbond Permagard steel, incorporating Microban anti-bacterial technology in its coating to provide durable, food-safe performance that will not wash off. This steel is available in Permagard White only. Colorbond standard grade steel comes in a wide range of designer colours. There are other skin materials available on request, including Colorbond Stainless steel and Ultra steel for severe coastal and industrial environments.ColourThe many colours available in Colorbond range from traditional to modern. For Prestige Applications there is Colorbond Metalic steel.Generally, the lighter colours are preferred for EPS panel used ex-ternally, because they reflect solar radiation. The various surfaces and colour choice can influence the price per square metre - our sales staff will gladly assist you in your selection.Dimensions Width: 1200mm as a modular standard. Thickness: 50 to 250mm in multiples of 25mm. Length: As required, determined by handling, design and transportation.ProfilesThe flat external skin incorporates a rib at panel to panel joints. The rib includes an anchor channel which is placed and bolted to each purlin. The internal skin is available with a flat surface finish or low profile of 0.75mm depth: 100mm Rib profile, 50mm Mesa Rib and Silkline. The Austral Slip-joint is incorporated into the edges of the internal skin for easy installation.
Austral Australia panel on display:
Some of the various applications for Austral Australia laminated insulated panel are illustrated above:
A residential dwelling and a health and fitness centre. Overleaf -
Unideck roof panel being laid on a new school complex.
900 x 1
.6mm A
nchor c
hannel
Snap-o
n Capp
ing co
ntinuou
s lengt
h