A.032 - ACEITE BLANCO SATIBOL Español · Nombre del producto: ACEITE BLANCO SATIBOL Código del...

FICHA DE DATOS DE SEGURIDAD (de acuerdo con el Reglamento (UE) No 453/2010)

A.032-ACEITE BLANCO SATIBOL

Versión: 6 Fecha de revisión: 22/09/2014

Página 1 de 99 Fecha de impresión: 15/04/2015

SECCIÓN 1: IDENTIFICACIÓN DE LA SUSTANCIA Y DE LA SOCIEDAD O LA EMPRESA.

1.1 Identificador del producto. Nombre del producto: ACEITE BLANCO SATIBOL Código del producto: A.032 Nombre químico: aceite mineral blanco (petróleo) N. CAS: 8042-47-5 N. CE: 232-455-8 N. registro: 01-2119487078-27-XXXX 1.2 Usos pertinentes identificados de la sustancia y usos desaconsejados. Uso industrial. Ver anexo 1. 1.3 Datos del proveedor de la ficha de datos de seguridad. Empresa: BRUGUES S.A. Dirección: C. ARIBAU , 19 Población: BARCELONA Provincia: BARCELONA Teléfono: 93 451 06 36 Fax: 93 453 75 37 E-mail: [email protected] Web: www.brugues.com 1.4 Teléfono de emergencia: (Solo disponible en horario de oficina)

SECCIÓN 2: IDENTIFICACIÓN DE LOS PELIGROS. 2.1 Clasificación de la sustancia. El producto no está clasificado como peligroso según la Directiva 67/548/EEC. El producto no está clasificado como peligroso según el Reglamento (EU) No 1272/2008. 2.2 Elementos de la etiqueta. . . Contiene:

aceite mineral blanco (petróleo)

2.3 Otros peligros. En condiciones de uso normal y en su forma original, el producto no tiene ningún otro efecto negativo para la salud y el medio ambiente.

SECCIÓN 3: COMPOSICIÓN/INFORMACIÓN SOBRE LOS COMPONENTES. 3.1 Sustancias. Nombre químico: aceite mineral blanco (petróleo) N. CAS: 8042-47-5 N. CE: 232-455-8 N. registro: 01-2119487078-27-XXXX 3.2 Mezclas. No Aplicable.

SECCIÓN 4: PRIMEROS AUXILIOS.





4.1 Descripción de los primeros auxilios. Debido a la composición y a la tipología de las sustancias presentes en el preparado, no se necesitan advertencias particulares. Inhalación. Situar al accidentado al aire libre, mantenerle caliente y en reposo, si la respiración es irregular o se detiene, practicar respiración artificial. No administrar nada por la boca. Si está inconsciente, ponerle en una posición adecuada y buscar ayuda médica. Contacto con los ojos. En caso de llevar lentes de contacto, quitarlas. Lavar abundantemente los ojos con agua limpia y fresca durante, por lo menos, 10 minutos, tirando hacia arriba de los párpados y buscar asistencia médica. Contacto con la piel. Quitar la ropa contaminada. Lavar la piel vigorosamente con agua y jabón o un limpiador de piel adecuado. NUNCA utilizar disolventes o diluyentes. Ingestión. Si accidentalmente se ha ingerido, buscar inmediatamente atención médica. Mantenerle en reposo. NUNCA provocar el vómito. 4.2 Principales síntomas y efectos, agudos y retardados. No se conocen efectos agudos o retardados derivados de la exposición al producto. 4.3 Indicación de toda atención médica y de los tratamientos especiales que deban dispensarse inmediatamente. En los casos de duda, o cuando persistan los síntomas de malestar, solicitar atención médica. No administrar nunca nada por vía oral a personas que se encuentre inconscientes.

SECCIÓN 5: MEDIDAS DE LUCHA CONTRA INCENDIOS. El producto NO esta clasificado como inflamable, en caso de incendio se deben seguir las medidas expuestas a continuación: 5.1 Medios de extinción. Medios de extinción recomendados. Polvo extintor o CO2. En caso de incendios más graves también espuma resistente al alcohol y agua pulverizada. No usar para la extinción chorro directo de agua. 5.2 Peligros específicos derivados de la sustancia. Riesgos especiales. El fuego puede producir un espeso humo negro. Como consecuencia de la descomposición térmica, pueden formarse productos peligrosos: monóxido de carbono, dióxido de carbono. La exposición a los productos de combustión o descomposición puede ser perjudicial para la salud. 5.3 Recomendaciones para el personal de lucha contra incendios. Refrigerar con agua los tanques, cisternas o recipientes próximos a la fuente de calor o fuego. Tener en cuenta la dirección del viento. Evitar que los productos utilizados en la lucha contra incendio, pasen a desagües, alcantarillas o cursos de agua. Equipo de protección contra incendios. Según la magnitud del incendio, puede ser necesario el uso de trajes de protección contra el calor, equipo respiratorio autónomo, guantes, gafas protectoras o máscaras faciales y botas.

SECCIÓN 6: MEDIDAS EN CASO DE VERTIDO ACCIDENTAL. 6.1 Precauciones personales, equipo de protección y procedimientos de emergencia. Para control de exposición y medidas de protección individual, ver epígrafe 8. 6.2 Precauciones relativas al medio ambiente. Producto no clasificado como peligroso para el medio ambiente, evitar en la medida de lo posible cualquier vertido. 6.3 Métodos y material de contención y de limpieza.





Recoger el vertido con materiales absorbentes no combustibles (tierra, arena, vermiculita, tierra de diatomeas...). Verter el producto y el absorbente en un contenedor adecuado. La zona contaminada debe limpiarse inmediatamente con un descontaminante adecuado. Echar el descontaminante a los restos y dejarlo durante varios días hasta que no se produzca reacción, en un envase sin cerrar. 6.4 Referencia a otras secciones. Para control de exposición y medidas de protección individual, ver epígrafe 8. Para la eliminación de los residuos, seguir las recomendaciones del epígrafe 13.

SECCIÓN 7: MANIPULACIÓN Y ALMACENAMIENTO. 7.1 Precauciones para una manipulación segura. El producto no requiere medidas especiales de manipulación, se recomiendan las siguientes medidas generales: Para la protección personal, ver epígrafe 8. No emplear nunca presión para vaciar los envases, no son recipientes resistentes a la presión. En la zona de aplicación debe estar prohibido fumar, comer y beber. Cumplir con la legislación sobre seguridad e higiene en el trabajo. Conservar el producto en envases de un material idéntico al original. 7.2 Condiciones de almacenamiento seguro, incluidas posibles incompatibilidades. El producto no requiere medidas especiales de almacenamiento. Como condiciones generales de almacenamiento se deben evitar fuentes de calor, radiaciones, electricidad y el contacto con alimentos. Mantener lejos de agentes oxidantes y de materiales fuertemente ácidos o alcalinos. Almacenar los envases entre 5 y 35 °C, en un lugar seco y bien ventilado. Almacenar según la legislación local. Observar las indicaciones de la etiqueta. El producto no se encuentra afectado por la Directiva 2012/18/UE (SEVESO III). 7.3 Usos específicos finales.

SECCIÓN 8: CONTROLES DE EXPOSICIÓN/PROTECCIÓN INDIVIDUAL. 8.1 Parámetros de control. El producto NO contiene sustancias con Valores Límite Ambientales de Exposición Profesional.El producto NO contiene sustancias con Valores Límite Biológicos. 8.2 Controles de la exposición. Medidas de orden técnico: Proveer una ventilación adecuada, lo cual puede conseguirse mediante una buena extracción-ventilación local y un buen sistema general de extracción. Concentración: 100 % Usos: Protección respiratoria: Si se cumplen las medidas técnicas recomendadas no es necesario ningún equipo de protección individual. Protección de las manos: EPI: Guantes de protección

Características: Marcado «CE» Categoría II.

Normas CEN: EN 374-1, En 374-2, EN 374-3, EN 420

Mantenimiento: Se guardarán en un lugar seco, alejados de posibles fuentes de calor, y se evitará la exposición a los rayos solares en la medida de lo posible. No se realizarán sobre los guantes modificaciones que puedan alterar su resistencia ni se aplicarán pinturas, disolventes o adhesivos.

Observaciones: Los guantes deben ser de la talla correcta, y ajustarse a la mano sin quedar demasiado holgados ni demasiado apretados. Se deberán utilizar siempre con las manos limpias y secas.

Material: PVC (Cloruro de polivinilo)

Tiempo de penetración (min.): > 480 Espesor del

material (mm): 0,35





Protección de los ojos: EPI: Pantalla facial

Características: Marcado «CE» Categoría II. Protector de ojos y cara contra salpicaduras de líquidos.

Normas CEN: EN 165, EN 166, EN 167, EN 168

Mantenimiento: La visibilidad a través de los oculares debe ser óptima para lo cual estos elementos se deben limpiar a diario, los protectores deben desinfectarse periódicamente siguiendo las instrucciones del fabricante. Se vigilará que las partes móviles tengan un accionamiento suave.

Observaciones: Las pantallas faciales deben tener un campo de visión con una dimensión en la línea central de 150 mm como mínimo, en sentido vertical una vez acopladas en el armazón.

Protección de la piel: EPI: Ropa de protección

Características: Marcado «CE» Categoría II. La ropa de protección no debe ser estrecha o estar suelta para que no interfiera en los movimientos del usuario.

Normas CEN: EN 340

Mantenimiento: Se deben seguir las instrucciones de lavado y conservación proporcionadas por el fabricante para garantiza una protección invariable.

Observaciones: La ropa de protección debería proporcionar un nivel de confort consistente con el nivel de protección que debe proporcionar contra el riesgo contra el que protege, con las condiciones ambientales, el nivel de actividad del usuario y el tiempo de uso previsto.

EPI: Calzado de trabajo Características: Marcado «CE» Categoría II.

Normas CEN: EN ISO 13287, EN 20347

Mantenimiento: Estos artículos se adaptan a la forma del pie del primer usuario. Por este motivo, al igual que por cuestiones de higiene, debe evitarse su reutilización por otra persona.

Observaciones: El calzado de trabajo para uso profesional es el que incorpora elementos de protección destinados a proteger al usuario de las lesiones que pudieran provocar los accidentes, se debe revisar los trabajor para los cuales es apto este calzado.

SECCIÓN 9: PROPIEDADES FÍSICAS Y QUÍMICAS. 9.1 Información sobre propiedades físicas y químicas básicas. Aspecto:N.D./N.A. Color: N.D./N.A. Olor:N.D./N.A. Umbral olfativo:N.D./N.A. pH:N.D./N.A. Punto de Fusión:N.D./N.A. Punto/intervalo de ebullición: N.D./N.A. Punto de inflamación: 115 ºC Tasa de evaporación: N.D./N.A. Inflamabilidad (sólido, gas): N.D./N.A. Límite inferior de explosión: N.D./N.A. Límite superior de explosión: N.D./N.A. Presión de vapor: N.D./N.A. Densidad de vapor:N.D./N.A. Densidad relativa:N.D./N.A. Solubilidad:N.D./N.A. Liposolubilidad: N.D./N.A. Hidrosolubilidad: N.D./N.A. Coeficiente de reparto (n-octanol/agua): N.D./N.A. Temperatura de autoinflamación: N.D./N.A. Temperatura de descomposición: N.D./N.A. Viscosidad: N.D./N.A. Propiedades explosivas: N.D./N.A. Propiedades comburentes: N.D./N.A. N.D./N.A.= No Disponible/No Aplicable debido a la naturaleza del producto. 9.2. Información adicional.





Contenido de COV (p/p): N.D.

SECCIÓN 10: ESTABILIDAD Y REACTIVIDAD. 10.1 Reactividad. El producto no presenta peligros debido a su reactividad. 10.2 Estabilidad química. Estable bajo las condiciones de manipulación y almacenamiento recomendadas (ver epígrafe 7). 10.3 Posibilidad de reacciones peligrosas. El producto no presenta posibilidad de reacciones peligrosas. 10.4 Condiciones que deben evitarse. Evitar cualquier tipo de manipulación incorrecta. 10.5 Materiales incompatibles. Mantener alejado de agentes oxidantes y de materiales fuertemente alcalinos o ácidos, a fin de evitar reacciones exotérmicas. 10.6 Productos de descomposición peligrosos. No se descompone si se destina a los usos previstos.

SECCIÓN 11: INFORMACIÓN TOXICOLÓGICA. 11.1 Información sobre los efectos toxicológicos. El contacto repetido o prolongado con el producto, puede causar la eliminación de la grasa de la piel, dando lugar a una dermatitis de contacto no alérgica y a que se absorba el producto a través de la piel. Las salpicaduras en los ojos pueden causar irritación y daños reversibles. . a) toxicidad aguda; Datos no concluyentes para la clasificación. b) corrosión o irritación cutáneas; Datos no concluyentes para la clasificación. c) lesiones o irritación ocular graves; Datos no concluyentes para la clasificación. d) sensibilización respiratoria o cutánea; Datos no concluyentes para la clasificación. e) mutagenicidad en células germinales; Datos no concluyentes para la clasificación. f) carcinogenicidad; Datos no concluyentes para la clasificación. g) toxicidad para la reproducción; Datos no concluyentes para la clasificación. h) toxicidad específica en determinados órganos (STOT) - exposición única; Datos no concluyentes para la clasificación. i) toxicidad específica en determinados órganos (STOT) - exposición repetida; Datos no concluyentes para la clasificación. j) peligro de aspiración; Datos no concluyentes para la clasificación.





SECCIÓN 12: INFORMACIÓN ECOLÓGICA. 12.1 Toxicidad. No se dispone de información relativa a la Ecotoxicidad. 12.2 Persistencia y degradabilidad. No existe información disponible sobre la persistencia y degradabilidad del producto. 12.3 Potencial de Bioacumulación. Información sobre la bioacumulación.

Nombre Bioacumulación

Log Pow BCF NOECs Nivel

aceite mineral blanco (petróleo) 0 - - Muy bajo

N. CAS: 8042-47-5 N. CE: 232-455-8

12.4 Movilidad en el suelo. No existe información disponible sobre la movilidad en el suelo. No se debe permitir que el producto pase a las alcantarillas o a cursos de agua. Evitar la penetración en el terreno. 12.5 Resultados de la valoración PBT y mPmB. No existe información disponible sobre la valoración PBT y mPmB del producto. 12.6 Otros efectos adversos. No existe información disponible sobre otros efectos adversos para el medio ambiente.

SECCIÓN 13: CONSIDERACIONES RELATIVAS A LA ELIMINACIÓN. 13.1 Métodos para el tratamiento de residuos. No se permite su vertido en alcantarillas o cursos de agua. Los residuos y envases vacíos deben manipularse y eliminarse de acuerdo con las legislaciones local/nacional vigentes. Seguir las disposiciones de la Directiva 2008/98/CE respecto a la gestión de residuos.

SECCIÓN 14: INFORMACIÓN RELATIVA AL TRANSPORTE. No es peligroso en el transporte. En caso de accidente y vertido del producto actuar según el punto 6. 14.1 Número ONU. No es peligroso en el transporte. 14.2 Designación oficial de transporte de las Naciones Unidas. No es peligroso en el transporte. 14.3 Clase(s) de peligro para el transporte. No es peligroso en el transporte. 14.4 Grupo de embalaje. No es peligroso en el transporte. 14.5 Peligros para el medio ambiente. No es peligroso en el transporte. 14.6 Precauciones particulares para los usuarios.





No es peligroso en el transporte. 14.7 Transporte a granel con arreglo al anexo II del Convenio Marpol 73/78 y del Código IBC. No es peligroso en el transporte.

SECCIÓN 15: INFORMACIÓN REGLAMENTARIA. 15.1 Reglamentación y legislación en materia de seguridad, salud y medio ambiente específicas para la sustancia. El producto no está afectado por el Reglamento (CE) no 1005/2009 del Parlamento Europeo y del Consejo, de 16 de septiembre de 2009, sobre las sustancias que agotan la capa de ozono. El producto no se encuentra afectado por la Directiva 2012/18/UE (SEVESO III). El producto no está afectado por el Reglamento (UE) No 528/2012 relativo a la comercialización y el uso de los biocidas. El producto no se encuentra afectado por el procedimiento establecido en el Reglamento (UE) No 649/2012, relativo a la exportación e importación de productos químicos peligrosos. 15.2 Evaluación de la seguridad química. No se ha llevado a cabo una evaluación de la seguridad química del producto.

SECCIÓN 16: OTRA INFORMACIÓN. ANEXO 1 PROCUCTO: ACEITE MINERAL

Manufacture, use and exposure

Identified uses

Information on uses

Manufacture

01 – Manufacture of Substances (not classified)

Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 2: Use in closed, continuous process with occasional controlled exposure PROC 3: Use in closed batch process (synthesis or formulation)

PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-

dedicated facilities PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at

dedicated facilities PROC 15: Use as laboratory reagent

Environmental release category

ERC 1: Manufacture of substances

01 – Manufacture of Substances (H304)

Process category











Manufacture of substance

Process category

PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at

dedicated facilities PROC 1: Use in closed process, no likelihood of exposure PROC 2: Use in closed, continuous process with occasional controlled exposure PROC 3: Use in closed batch process (synthesis or formulation)




ERC 1: Manufacture of substances ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: ESVOC Sp

ERC 1.1.v1

Distribution of substance

Process category




dedicated facilities PROC 9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing)

PROC 15: Use as laboratory reagent


ERC 1: Manufacture of substances ERC 2: Formulation of preparations ERC 3: Formulation in materials ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 5: Industrial use resulting in inclusion into or onto a matrix ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates)

ERC 6b: Industrial use of reactive processing aids ERC 6c: Industrial use of monomers for manufacture of thermoplastics ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,

polymers ERC 7: Industrial use of substances in closed systems ERC 0: Other: ESVOC Sp

ERC 1.1b.v1

Rubber production and processing

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or

significant contact)

PROC 6: Calendering operations PROC 7: Industrial spraying





PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-



PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 15: Use as laboratory reagent PROC 21: Low energy manipulation of substances bound in materials and/or articles


ERC 1: Manufacture of substances ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,

polymers ERC 0: Other: ESVOC Sp

ERC 4.19.v1

Manufacture of Substances (not classified)

Process category






ERC 1: Manufacture of substances ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles


Process category









polymers ERC 7: Industrial use of substances in closed systems






Process category







ERC 1.1.v1

01 – Manufacture of Substances (R65)

Process category







ERC 1.1.v1

01a – Distribution of substance (not classified)

Process category














ERC 1.1b.v1

01a – Distribution of substance (R65)

Process category










ERC 1.1b.v1

19 – Rubber production and processing: Industrial (not classified)

Process category




PROC 6: Calendering operations PROC 7: Industrial spraying PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-











ERC 4.19.v1

19 – Rubber production and processing: Industrial (R65)

Process category











ERC 4.19.v1

Manufacture of Intermediate under SCC

Process category







Formulation

02 – Formulation & (re)packing of substances and mixtures (not classified)

Process category





dedicated facilities







PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 15: Use as laboratory reagent


ERC 2: Formulation of preparations

02 – Formulation & (re)packing of substances and mixtures (H304)

Process category











Process category










ERC 1.1b.v1

Formulation & (re)packing of substances and mixtures

Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 2: Use in closed, continuous process with occasional controlled exposure





PROC 3: Use in closed batch process (synthesis or formulation)








ERC 2: Formulation of preparations ERC 0: Other: ESVOC Sp

ERC 2.2.v1

Use in laboratories

Process category

PROC 10: Roller application or brushing PROC 15: Use as laboratory reagent


ERC 2: Formulation of preparations ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: WILL USE ERC DEFINED RELEASE FRACTIONS

Use in water treatment chemicals

Process category




dedicated facilities PROC 13: Treatment of articles by dipping and pouring


ERC 3: Formulation in materials ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: ESVOC Sp

ERC 3.22a.v1


Process category







ERC 1: Manufacture of substances ERC 2: Formulation of preparations





ERC 3: Formulation in materials ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 5: Industrial use resulting in inclusion into or onto a matrix ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates)




Process category











Process category










ERC 2.2.v1

02 – Formulation & (re)packing of substances and mixtures (R65)

Process category














ERC 2.2.v1

Formulation and (re)packing of substances and mixtures

Process category






dedicated facilities PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring PROC 15: Use as laboratory reagent

Chemical product category

PC 24: Lubricants, greases, release products PC 39: Cosmetics, personal care products



Substance supplied to that use in form of

As such In a mixture


Process category








ERC 6b: Industrial use of reactive processing aids ERC 6c: Industrial use of monomers for manufacture of thermoplastics





ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,


ERC 1.1b.v1


Process category










ERC 1.1b.v1

17a – Use in Laboratories: Industrial (not classified)

Process category



ERC 2: Formulation of preparations ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: ERC DEFINED RELEASE FRACTIONS

17a – Use in Laboratories: Industrial (R65)

Process category




22a – Use in water treatment chemicals: Industrial (not classified)

Process category











ERC 3.22a.v1

22a – Use in water treatment chemicals: Industrial (R65)

Process category







ERC 3.22a.v1

Uses in Coatings

Process category









Use in polymer processing

Process category











PROC 9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing)

PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles


PC 32: Polymer preparations and compounds


ERC 3: Formulation in materials ERC 5: Industrial use resulting in inclusion into or onto a matrix ERC 10a: Wide dispersive outdoor use of long-life articles and materials with low release ERC 11a: Wide dispersive indoor use of long-life articles and materials with low release ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,

polymers ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8c: Wide dispersive indoor use resulting in inclusion into or onto a matrix ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix


In a mixture


Process category

PROC 0: Other: No PROC required in section 3.5, based on REACH Art. 10 a (iii)



Uses at Industrial Sites


Process category







ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 5: Industrial use resulting in inclusion into or onto a matrix ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates)



Subsequent service life relevant for that use?

no

01a – Distribution of substance (H304)

Process category















no

03a – Uses in Coatings: Industrial (not classified)

Process category




PROC 7: Industrial spraying PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-




ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles


no

03a – Uses in Coatings: Industrial (H304)

Process category











PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring PROC 15: Use as laboratory reagent




no

04a – Use in Cleaning Agents: Industrial (not classified)

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 7: Industrial spraying PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-


dedicated facilities PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring




no

04a – Use in Cleaning Agents: Industrial (H304)

Process category








no

07a –Use in metal working fluids / rolling oils: Industrial (not classified)

Process category












PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process




no

07a –Use in Metal working fluids / rolling oils: Industrial (H304)

Process category











no

10a – Use as release agents or binders: Industrial (not classified)

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 6: Calendering operations PROC 7: Industrial spraying PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at

dedicated facilities PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation




no

10a – Use as release agents or binders: Industrial (H304)

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 6: Calendering operations PROC 7: Industrial spraying










no


Process category









ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,

polymers

Sector of end use

SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)

SU 11: Manufacture of rubber products


no

19 – Rubber production and processing: Industrial (H304)

Process category







PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation





PROC 15: Use as laboratory reagent PROC 21: Low energy manipulation of substances bound in materials and/or articles


ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 6d: Industrial use of process regulators for polymerization processes in production of resins, rubbers,

polymers

Sector of end use




no

21a – Use in polymer processing: Industrial (not classified)

Process category




PROC 6: Calendering operations PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-



PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles



Sector of end use



no

21a – Use in polymer processing: Industrial (H304)

Process category










Sector of end use







no

06a – Lubricants: Industrial (not classified)

Process category





PROC 10: Roller application or brushing PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process PROC 18: Greasing at high energy conditions


ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 7: Industrial use of substances in closed systems


no

06a – Lubricants: Industrial (H304)

Process category









no


Process category





no

17a – Use in Laboratories: Industrial (H304)





Process category





no


Process category







Sector of end use



no

22a – Use in water treatment chemicals: Industrial (H304)

Process category







Sector of end use



no

13a – Use as a functional fluids: Industrial (not classified)

Process category






ERC 7: Industrial use of substances in closed systems






no

13a – Use as a functional fluids: Industrial (H304)

Process category








no

Manufacture of substance

Process category







ERC 1.1.v1

Sector of end use

SU 9: Manufacture of fine chemicals SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)


yes


Process category







ERC 1: Manufacture of substances ERC 2: Formulation of preparations ERC 3: Formulation in materials








ERC 1.1b.v1


yes

Use of substance as intermediate

Process category






ERC 6a: Industrial use resulting in manufacture of another substance (use of intermediates)

ERC 0: Other: ESVOC Sp

ERC 6.1a.v1

Sector of end use

SU 9: Manufacture of fine chemicals SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)

SU 0: Other: SU 3: Uses of substances as such or in preparations at industrial sites


yes


Process category










ERC 2.2.v1

Sector of end use







yes

Uses in Coatings

Process category








ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: ESVOC Sp

ERC 4.3a.v1


yes

Use in Cleaning Agents

Process category







ERC 4.4a.v1


yes

Use in Metal working fluids / rolling oils

Process category















ERC 4.7a.v1


yes

Use as release agents or binders

Process category






ERC 4.10a.v1


yes


Process category















ERC 4.19.v1

Sector of end use




yes


Process category










ERC 4.21a.v1

Sector of end use



yes

Lubricants

Process category







ERC 7: Industrial use of substances in closed systems ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: ESVOC Sp

ERC 4.6a.v1






yes

Use in laboratories

Process category



ERC 2: Formulation of preparations ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 0: Other: WILL USE ERC DEFINED RELEASE FRACTIONS


yes


Process category







ERC 3.22a.v1

Sector of end use



yes

Use as a functional fluids

Process category






ERC 7: Industrial use of substances in closed systems ERC 0: Other: ESVOC Sp

ERC 7.13a.v1


yes

Manufacture of Substances (not classified)

Process category










ERC 1: Manufacture of substances ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles

Sector of end use

SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)

SU 9: Manufacture of fine chemicals


yes


Process category










Sector of end use

SU 0: Other: Cosmetics


yes

01b – Use of substance as intermediate (not classified)

Process category












ERC 6.1a.v1

Sector of end use




no

01b – Use of substance as intermediate (R65)

Process category








ERC 6.1a.v1

Sector of end use




no


Process category










ERC 1.1b.v1






no


Process category










ERC 1.1b.v1


no


Process category









ERC 4.3a.v1


no

03a – Uses in Coatings: Industrial (R65)

Process category













ERC 4.3a.v1


no


Process category







ERC 4.4a.v1


no

04a – Use in Cleaning Agents: Industrial (R65)

Process category











ERC 4.4a.v1


no


Process category










ERC 4.7a.v1


no

07a –Use in Metal working fluids / rolling oils: Industrial (R65)

Process category










ERC 4.7a.v1


no


Process category










ERC 4.10a.v1


no

10a – Use as release agents or binders: Industrial (R65)

Process category






ERC 4.10a.v1


no


Process category







PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation





PROC 15: Use as laboratory reagent PROC 21: Low energy manipulation of substances bound in materials and/or articles




ERC 4.19.v1

Sector of end use




no


Process category











ERC 4.19.v1

Sector of end use




no


Process category




PROC 6: Calendering operations











ERC 4.21a.v1

Sector of end use



no

21a – Use in polymer processing: Industrial (R65)

Process category










ERC 4.21a.v1

Sector of end use



no


Process category





PROC 10: Roller application or brushing





PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process PROC 18: Greasing at high energy conditions


ERC 4: Industrial use of processing aids in processes and products, not becoming part of articles ERC 7: Industrial use of substances in closed systems ERC 0: Other: ESVOC Sp

ERC 4.6a.v1


no

06a – Lubricants: Industrial (R65)

Process category








ERC 4.6a.v1


no


Process category





no


Process category





no






Process category







ERC 3.22a.v1

Sector of end use



no


Process category







ERC 3.22a.v1

Sector of end use



no


Process category







ERC 7.13a.v1






no

13a – Use as a functional fluids: Industrial (R65)

Process category







ERC 7.13a.v1


no

Uses in coatings

Process category








PC 24: Lubricants, greases, release products





Sector of end use



yes

Use in metal working fluids / rolling oils

Process category


PROC 5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or


PROC 7: Industrial spraying















Sector of end use



yes


Process category



dedicated facilities PROC 10: Roller application or brushing PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation




ERC 5: Industrial use resulting in inclusion into or onto a matrix



Sector of end use



yes


Process category










dedicated facilities PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 15: Use as laboratory reagent PROC 21: Low energy manipulation of substances bound in materials and/or articles





polymers



Sector of end use

SU 11: Manufacture of rubber products SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)


yes


Process category












polymers



Sector of end use



yes

Lubricants

Process category
















Sector of end use

SU 6b: Manufacture of pulp, paper and paper products SU 11: Manufacture of rubber products SU 12: Manufacture of plastics products, including compounding and conversion SU 14: Manufacture of basic metals, including alloys SU 15: Manufacture of fabricated metal products, except machinery and equipment SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment


yes


Process category






PC 37: Water treatment chemicals




In a mixture

Sector of end use



yes

Use as functional fluids

Process category










PC 26: Paper and board dye, finishing and impregnation products: including bleaches and other processing aids




In a mixture As such

Sector of end use



yes

Use as a cleaning agent

Process category






PC 35: Washing and cleaning products (including solvent based products)





Sector of end use



yes

Use in oil field drilling and production operations

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at













Sector of end use

SU 2b: Offshore industries


yes

Use in Laboratories

Process category



PC 21: Laboratory chemicals




In a mixture

Sector of end use

SU 24: Scientific research and development


yes


Process category







ERC 1.1.v1

Sector of end use




no


Process category











ERC 1.1.v1

Sector of end use



Subsequent service life relevant for that use

?no


Process category










ERC 2.2.v1

Sector of end use



no


Process category










ERC 2.2.v1

Sector of end use



no


Process category











Sector of end use




no

01b – Use of substance as intermediate (H304)

Process category







Sector of end use




no

Use as Intermediate under SCC

Process category






PC 19: Intermediate




As such

Sector of end use



no





Distribution of Intermediate under SCC

Process category






PC 19: Intermediate




polymers


As such


no


Process category







PROC 13: Treatment of articles by dipping and pouring PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles


PC 32: Polymer preparations and compounds





In a mixture





Sector of end use


SU 12: Manufacture of plastics products, including compounding and conversion SU 0: Other: SU 22


yes

Industrial use as a lubricant

Process category









In a mixture


no

Uses by Professional Workers

03b – Uses in Coatings: Professional (not classified)

Process category






dedicated facilities PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 15: Use as laboratory reagent PROC 19: Hand-mixing with intimate contact and only PPE available.


ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems


no





03b – Uses in Coatings: Professional (H304)

Process category










no

04b – Use in Cleaning Agents: Professional (not classified)

Process category




dedicated facilities PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring




no

04b – Use in Cleaning Agents: Professional (H304)

Process category




dedicated facilities PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 19: Hand-mixing with intimate contact and only PPE available.








no

07b – Use in Metal working fluids / rolling oils: Professional (not classified)

Process category







PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process




no

07b – Use in Metal working fluids / rolling oils: Professional (H304)

Process category











no

10b – Use as release agents or binders: Professional (not classified)

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 6: Calendering operations







dedicated facilities PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation




no

10b – Use as release agents or binders: Professional (H304)

Process category


PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 6: Calendering operations PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-






no

11a – Use in agrochemicals: Professional (not classified)

Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 2: Use in closed, continuous process with occasional controlled exposure PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-


dedicated facilities PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring




no

11a – Use in agrochemicals: Professional (H304)

Process category












no

06b – Lubricants: Professional (low release) (not classified)

Process category





PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process PROC 18: Greasing at high energy conditions PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems


ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems


no

06b – Lubricants: Professional (low release) (H304)

Process category









no

06c – Lubricants: Professional (high release) (not classified)





Process category









no

06c – Lubricants: Professional (high release) (H304)

Process category









no

17b – Use in Laboratories: Professional (not classified)

Process category



ERC 8a: Wide dispersive indoor use of processing aids in open systems


no

17b – Use in Laboratories: Professional (H304)

Process category









no

22b – Use in water treatment chemicals: Professional (not classified)

Process category






ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix


no

22b – Use in water treatment chemicals: Professional (H304)

Process category








no

18b – Explosives manufacture & use: Professional (not classified)

Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 3: Use in closed batch process (synthesis or formulation)







ERC 8e: Wide dispersive outdoor use of reactive substances in open systems


no

18b – Explosives manufacture & use: Professional (H304)

Process category












ERC 8e: Wide dispersive outdoor use of reactive substances in open systems


no

13b – Use as a functional fluids: Professional (not classified)

Process category




PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems




no

13b – Use as a functional fluids: Professional (H304)

Process category








no

Uses in Coatings

Process category











PROC 15: Use as laboratory reagent PROC 19: Hand-mixing with intimate contact and only PPE available.


ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 0: Other: ESVOC Sp

ERC 8.3b.v1


yes


Process category






ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 0: Other: ESVOC Sp

ERC 8.4b.v1


yes

Use in Metal working fluids / rolling oils

Process category










ERC 8.7c.v1


yes


Process category











ERC 8.10b.v1


yes

Use in agrochemicals

Process category






ERC 8.11a.v1


yes

Lubricants

Process category











ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems ERC 0: Other: ESVOC Sp

ERCs 9.6b.v1 ('low env. release' - ERCs 9A/9B) 8.6c.v1 ('high env. release' - ERCs 8A/8D)


yes

Use in laboratories

Process category



ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 0: Other: ESVOC Sp

ERC 8.17.v1


yes


Process category






ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix ERC 0: Other: ESVOC Sp

ERC 8.22b.v1


yes

Explosives manufacture & use

Process category








ERC 8e: Wide dispersive outdoor use of reactive substances in open systems ERC 0: Other: WILL USE ERC DEFINED RELEASE FRACTIONS


yes

Use as a functional fluids

Process category










ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems ERC 0: Other: ESVOC Sp

ERC 9.13b.v1


yes


Process category









ERC 8.3b.v1


no

03b – Uses in Coatings: Professional (R65)

Process category











PROC 15: Use as laboratory reagent PROC 19: Hand-mixing with intimate contact and only PPE available.



ERC 8.3b.v1


no


Process category







ERC 8.4b.v1


no

04b – Use in Cleaning Agents: Professional (R65)

Process category







ERC 8.4b.v1


no


Process category














ERC 8.7c.v1


no

07b – Use in Metal working fluids / rolling oils: Professional (R65)

Process category










ERC 8.7c.v1


no


Process category




dedicated facilities PROC 10: Roller application or brushing





PROC 11: Non industrial spraying PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation



ERC 8.10b.v1


no

10b – Use as release agents or binders: Professional (R65)

Process category







ERC 8.10b.v1


no


Process category






ERC 8.11a.v1


no

11a – Use in agrochemicals: Professional (R65)

Process category










ERC 8.11a.v1


no


Process category








ERC 9.6b.v1


no

06b – Lubricants: Professional (low release) (R65)

Process category












ERC 9.6b.v1


no


Process category








ERC 8.6c.v1


no

06c – Lubricants: Professional (high release) (R65)

Process category








ERC 8.6c.v1


no






Process category




ERC 8.17.v1


no

17b – Use in Laboratories: Professional (R65)

Process category




ERC 8.17.v1


no


Process category







ERC 8.22b.v1


no

22b – Use in water treatment chemicals: Professional (R65)

Process category







ERC 8.22b.v1


no






Process category








ERC 8e: Wide dispersive outdoor use of reactive substances in open systems ERC 0: Other: ERC DEFINED RELEASE FRACTIONS


no

18b – Explosives manufacture & use: Professional (R65)

Process category










no


Process category







ERC 9.13b.v1


no

13b – Use as a functional fluids: Professional (R65)

Process category












ERC 9.13b.v1


no

Use in coatings

Process category








PC 9a: Coatings and paints, thinners, paint removes




In a mixture

Sector of end use



yes

Use in metal working fluids / rolling oils

Process category






dedicated facilities PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process


PC 25: Metal working fluids








In a mixture

Sector of end use

SU 15: Manufacture of fabricated metal products, except machinery and equipment


no


Process category








ERC 8c: Wide dispersive indoor use resulting in inclusion into or onto a matrix


In a mixture

Sector of end use

SU 12: Manufacture of plastics products, including compounding and conversion


no


Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-




PC 0: Other: carriers for agricultural products


ERC 8c: Wide dispersive indoor use resulting in inclusion into or onto a matrix ERC 8d: Wide dispersive outdoor use of processing aids in open systems


In a mixture

Sector of end use

SU 1: Agriculture, forestry and fishing


no

Uses in polymer processing





Process category

PROC 1: Use in closed process, no likelihood of exposure PROC 2: Use in closed, continuous process with occasional controlled exposure PROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-


dedicated facilities PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles




ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8c: Wide dispersive indoor use resulting in inclusion into or onto a matrix ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix


In a mixture

Sector of end use

SU 11: Manufacture of rubber products SU 12: Manufacture of plastics products, including compounding and conversion SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment


yes

Lubricants

Process category





PROC 13: Treatment of articles by dipping and pouring PROC 17: Lubrication at high energy conditions and in partly open process PROC 20: Heat and pressure transfer fluids in dispersive, professional use but closed systems




ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems


In a mixture

Sector of end use

SU 11: Manufacture of rubber products SU 12: Manufacture of plastics products, including compounding and conversion SU 15: Manufacture of fabricated metal products, except machinery and equipment SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment SU 6b: Manufacture of pulp, paper and paper products SU 14: Manufacture of basic metals, including alloys






no

Use in water treatment agents

Process category




PROC 4: Use in batch and other process (synthesis) where opportunity for exposure arises PROC 13: Treatment of articles by dipping and pouring


PC 37: Water treatment chemicals




In a mixture

Sector of end use

SU 0: Other: Water Treatment


no


Process category






PC 35: Washing and cleaning products (including solvent based products)





Sector of end use



yes

Use in oil field drilling and production operations

Process category

PROC 3: Use in closed batch process (synthesis or formulation)












ERC 8d: Wide dispersive outdoor use of processing aids in open systems



Sector of end use

SU 2b: Offshore industries


yes

Use in Laboratories

Process category



PC 21: Laboratory chemicals





Sector of end use

SU 24: Scientific research and development


yes

Explosives Manufacture and Use

Process category








PC 11: Explosives





Sector of end use

SU 2a: Mining (without offshore industries)


yes

Use in road and construction applications (15)

Process category








PROC 10: Roller application or brushing PROC 11: Non industrial spraying PROC 13: Treatment of articles by dipping and pouring


ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix ERC 0: Other: ESVOC Sp

ERC 8.15.v1




yes


Process category

PROC 0: Other: No PROC required in section 3.5, based on REACH Art. 10 a (iii)


In a mixture

Sector of end use

SU 0: Other: No SU required in section 3.5, based on REACH Art. 10 a (iii)


no

use of laboratory reagents

Process category



PC 21: Laboratory chemicals PC 20: Products such as ph-regulators, flocculants, precipitants, neutralization agents




In a mixture

Sector of end use

SU 20: Health services


no

Lab chemical used in medium amounts (> 1l or 1 kg)

Process category



PC 20: Products such as ph-regulators, flocculants, precipitants, neutralization agents PC 21: Laboratory chemicals

Environmental release categoryERC 8a: Wide dispersive indoor use of processing aids in open systems

Substance supplied to that use in form ofIn a mixture

Sector of end useSU 20: Health services SU 24: Scientific research and development

Subsequent service life relevant for that use?no

Lab chemicals, mixing and/or re-packaging





Process categoryPROC 8a: Transfer of substance or preparation (charging/discharging) from/to vessels/large

containers at non-dedicated facilities PROC 8b: Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at



PC 20: Products such as ph-regulators, flocculants, precipitants, neutralization agents PC 21: Laboratory chemicals




In a mixture

Sector of end use



no

Consumer Uses

03c – Uses in Coatings: Consumer (not classified)


PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 15: Non-metal-surface treatment products PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids PC 0: Other: PC 8: Biocide products (e.g. disinfectants, pest control) Excipient only




no

03c – Uses in Coatings: Consumer (H304)


PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 15: Non-metal-surface treatment products PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids PC 0: Other: PC 8: Biocide products (e.g. disinfectants, pest control) Excipient only








no

04c – Use in Cleaning Agents: Consumer (not classified)


PC 3: Air care products PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 24: Lubricants, greases, release products PC 35: Washing and cleaning products (including solvent based products)

PC 38: Welding and soldering products (with flux coatings or flux cores.), flux products PC 0: Other: PC 8: Biocide products (e.g. disinfectants, pest control) Excipient only




no

04c – Use in Cleaning Agents: Consumer (H304)



PC 38: Welding and soldering products (with flux coatings or flux cores.), flux products PC 0: Other: PC 8: Biocide products (e.g. disinfectants, pest control) Excipient only




no

11b – Use in Agrochemicals: Consumer (not classified)


PC 12: Fertilizers PC 27: Plant protection products




no

11b – Use in Agrochemicals: Consumer (H304)






no

12c – Use as a fuel: Consumer (not classified)


PC 13: Fuels








no

12c – Use as a fuel: Consumer (H304)


PC 13: Fuels




no

06d – Lubricants: Consumer (low release) (not classified)


PC 1: Adhesives, sealants PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends




no

06d – Lubricants: Consumer (low release) (H304)






no

06e – Lubricants: Consumer (high release) (not classified)






no

06e – Lubricants: Consumer (high release) (H304)






no

16 – Other Consumer Uses (not classified)






PC 28: Perfumes, fragrances PC 39: Cosmetics, personal care products




no

16 – Other Consumer Uses (H304)






no

Uses in Coatings


PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 15: Non-metal-surface treatment products PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 0: Other: PC5, PC10



ERC 8.3c.v1


yes




PC 38: Welding and soldering products (with flux coatings or flux cores.), flux products



ERC 8.4c.v1


yes







PC 12: Fertilizers PC 27: Plant protection products PC 0: Other: PC22



ERC 8.11b.v1


yes

Use as a fuel


PC 13: Fuels



ERC 9.12c.v1


yes

Lubricants


PC 1: Adhesives, sealants PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 0: Other: PC6


ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems ERC 0: Other: ESVOC Sp

ERCs 9.6d.v1 ('low env. release' – ERCs 9A/9B) 8.6e.v1 ('high env. release' – ERCs 8A/8D)


yes

Other Consumer Uses





ERC 8.16.v1


yes

Other Consumer Uses


PC 28: Perfumes, fragrances PC 29: Pharmaceuticals PC 39: Cosmetics, personal care products


ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8b: Wide dispersive indoor use of reactive substances in open systems






yes



PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 15: Non-metal-surface treatment products PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids PC 0: Other: PC 5: Artists supply and hobby preparations / PC 10: Building and construction preparations



ERC 8.3c.v1


no

03c – Uses in Coatings: Consumer (R65)


PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 15: Non-metal-surface treatment products PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 34: Textile dyes, finishing and impregnating products; including bleaches and other processing aids PC 0: Other: PC 5: Artists supply and hobby preparations / PC 10: Building and construction preparations



ERC 8.3c.v1


no











ERC 8.4c.v1


no

04c – Use in Cleaning Agents: Consumer (R65)






ERC 8.4c.v1


no



PC 12: Fertilizers PC 27: Plant protection products PC 0: Other: PC 22: Lawn and Garden Preparations, including fertilizers



ERC 8.11b.v1


no

11b – Use in Agrochemicals: Consumer (R65)


PC 12: Fertilizers PC 27: Plant protection products PC 0: Other: PC 22: Lawn and Garden Preparations, including fertilizers



ERC 8.11b.v1


no



PC 13: Fuels



ERC 9.12c.v1






no

12c – Use as a fuel: Consumer (R65)


PC 13: Fuels



ERC 9.12c.v1


no



PC 1: Adhesives, sealants PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends PC 0: Other: PC 6: Automotive Care Products



ERC 9.6d.v1


no

06d – Lubricants: Consumer (low release) (R65)





ERC 9.6d.v1


no






ERC 8.6e.v1


no

06e – Lubricants: Consumer (high release) (R65)


PC 1: Adhesives, sealants PC 24: Lubricants, greases, release products





PC 31: Polishes and wax blends PC 0: Other: PC 6: Automotive Care Products



ERC 8.6e.v1


no






ERC 8.16.v1


no

16 – Other Consumer Uses (R65)





ERC 8.16.v1


no

Uses in Coatings


PC 1: Adhesives, sealants PC 4: Anti-freeze and de-icing products PC 9a: Coatings and paints, thinners, paint removes PC 9b: Fillers, putties, plasters, modelling clay PC 9c: Finger paints PC 18: Ink and toners PC 23: Leather tanning, dye, finishing, impregnation and care products PC 24: Lubricants, greases, release products PC 31: Polishes and wax blends




yes

Lubricants








ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 9a: Wide dispersive indoor use of substances in closed systems ERC 9b: Wide dispersive outdoor use of substances in closed systems


yes



PC 36: Water softeners PC 37: Water treatment chemicals


ERC 8b: Wide dispersive indoor use of reactive substances in open systems ERC 8e: Wide dispersive outdoor use of reactive substances in open systems


yes

Use as functional fluids


PC 16: Heat transfer fluids PC 17: Hydraulic fluids




yes



PC 3: Air care products PC 4: Anti-freeze and de-icing products PC 24: Lubricants, greases, release products PC 35: Washing and cleaning products (including solvent based products)




yes







yes

Article Service Life





ERC 6.1a.v1

Article category related to subsequent service life

AC 0: Other: refer to the relevant ‘main user group’ SU (i.e. 3, 21 and/or 22) and use description including the

identified ERC(s) and SpERC(s)





01b – Use of substance as intermediate (R65)




ERC 6.1a.v1









ERC 1.1b.v1









ERC 1.1b.v1





Process category

PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation



ERC 2.2.v1









Process category




ERC 2.2.v1







ERC 4.3a.v1




03a – Uses in Coatings: Industrial (R65)



ERC 4.3a.v1







ERC 4.4a.v1




04a – Use in Cleaning Agents: Industrial (R65)



ERC 4.4a.v1







ERC 4.7a.v1




07a –Use in Metal working fluids / rolling oils: Industrial (R65)







ERC 4.7a.v1





Process category




ERC 4.10a.v1




10a – Use as release agents or binders: Industrial (R65)

Process category




ERC 4.10a.v1





Process category

PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles




ERC 4.19.v1





Process category





ERC 4.19.v1





Process category








ERC 4.21a.v1




21a – Use in polymer processing: Industrial (R65)

Process category




ERC 4.21a.v1







ERC 4.6a.v1




06a – Lubricants: Industrial (R65)



ERC 4.6a.v1























ERC 3.22a.v1







ERC 3.22a.v1







ERC 7.13a.v1




13a – Use as a functional fluids: Industrial (R65)



ERC 7.13a.v1







ERC 8.3b.v1




03b – Uses in Coatings: Professional (R65)



ERC 8.3b.v1











ERC 8.4b.v1




04b – Use in Cleaning Agents: Professional (R65)



ERC 8.4b.v1







ERC 8.7c.v1




07b – Use in Metal working fluids / rolling oils: Professional (R65)



ERC 8.7c.v1





Process category




ERC 8.10b.v1




10b – Use as release agents or binders: Professional (R65)

Process category




ERC 8.10b.v1











ERC 8.11a.v1




11a – Use in agrochemicals: Professional (R65)



ERC 8.11a.v1







ERC 9.6b.v1




06b – Lubricants: Professional (low release) (R65)



ERC 9.6b.v1







ERC 8.6c.v1




06c – Lubricants: Professional (high release) (R65)



ERC 8.6c.v1











ERC 8.17.v1




17b – Use in Laboratories: Professional (R65)



ERC 8.17.v1







ERC 8.22b.v1




22b – Use in water treatment chemicals: Professional (R65)



ERC 8.22b.v1










18b – Explosives manufacture & use: Professional (R65)













ERC 9.13b.v1




13b – Use as a functional fluids: Professional (R65)



ERC 9.13b.v1







ERC 8.3c.v1




03c – Uses in Coatings: Consumer (R65)



ERC 8.3c.v1







ERC 8.4c.v1




04c – Use in Cleaning Agents: Consumer (R65)



ERC 8.4c.v1











ERC 8.11b.v1




11b – Use in Agrochemicals: Consumer (R65)



ERC 8.11b.v1







ERC 9.12c.v1




12c – Use as a fuel: Consumer (R65)



ERC 9.12c.v1







ERC 9.6d.v1




06d – Lubricants: Consumer (low release) (R65)



ERC 9.6d.v1











ERC 8.6e.v1




06e – Lubricants: Consumer (high release) (R65)



ERC 8.6e.v1







ERC 8.16.v1




16 – Other Consumer Uses (R65)


ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 0: Other: ESVOC SpERC 8.16.v1





Process category




polymers


AC 10: Rubber articles


Process category




polymers


AC 01: Other (non intended to be released): Polymer articles

Lubricants








AC 1: Vehicles AC 6: Leather articles AC 7: Metal articles AC 10: Rubber articles AC 13: Plastic articles

Uses in polymer processing

Process category



ERC 8a: Wide dispersive indoor use of processing aids in open systems ERC 8d: Wide dispersive outdoor use of processing aids in open systems ERC 8c: Wide dispersive indoor use resulting in inclusion into or onto a matrix ERC 8f: Wide dispersive outdoor use resulting in inclusion into or onto a matrix


AC 01: Other (non intended to be released): Polymer products




ERC 1.1.v1







ERC 1.1.v1





Process category

PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation PROC 21: Low energy manipulation of substances bound in materials and/or articles PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles





AC 13: Plastic articles

Uses advised against





Information on uses advised against

Uses at Industrial Sites

All uses apart from that intended by the importer are advised against.

Process category

PROC 0: Other:


PC 0: Other: All uses apart from that intended by the importer formulator are advised against.


ERC 0: Other: All uses apart from that intended by the importer formulator are advised against.

Sector of end use

SU 0: Other: All uses apart from that intended by the importer formulator are advised against.

Uses by Professional Workers

All uses apart from that intended by the importer formulator are advised against.

Process category

PROC 0: Other:





Sector of end use

SU 0: Other: All uses apart from that intended by the importer formulator are advised against.

Consumer Uses

All uses apart from that intended by the importer formulator are advised against.





Epígrafes modificados respecto a la versión anterior: 1,11,12,16 Se recomienda utilizar el producto únicamente para los usos contemplados. . La información facilitada en esta ficha de Datos de Seguridad ha sido redactada de acuerdo con el REGLAMENTO (UE) No 453/2010 DE LA COMISIÓN de 20 de mayo de 2010 por el que se modifica el Reglamento (CE) nº 1907/2006 DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 18 de diciembre de 2006 relativo al registro, la evaluación, la autorización y la restricción de las sustancias y preparados químicos (REACH), por el que se crea la Agencia Europea de Sustancias y Preparados Químicos, se modifica la Directiva 1999/45/CE y se derogan el Reglamento (CEE) nº 793/93 del Consejo y el Reglamento (CE) nº 1488/94 de la Comisión así como la Directiva 76/769/CEE del Consejo y las Directivas 91/155/CEE, 93/67/CEE, 93/105/CE y 2000/21/CE de la Comisión.

La información de esta Ficha de Datos de Seguridad del Producto está basada en los conocimientos actuales y en las leyes vigentes de la CE y nacionales, en cuanto que las condiciones de trabajo de los usuarios están fuera de nuestro conocimiento y control. El producto no debe utilizarse para fines distintos a aquellos que se especifican, sin tener primero una instrucción por escrito, de su manejo. Es siempre responsabilidad del usuario tomar las medidas oportunas con el fin de cumplir con las exigencias establecidas en las legislaciones.

A.032 - ACEITE BLANCO SATIBOL Español · Nombre del producto: ACEITE BLANCO SATIBOL Código del...

Documents

Transcript of A.032 - ACEITE BLANCO SATIBOL Español · Nombre del producto: ACEITE BLANCO SATIBOL Código del...