A-LOK Magnetic MandrelsMAGNETIC MANDREL SYSTEM MAGNET ASSEMBLY CONFIGURATION SPECIALLY DESIGNED...
4
MAGNETIC MANDREL SYSTEM A•LOK MAGNETIC MANDREL SYSTEM • Faster set-up • No drilling or cutting of core • Special curved magnet face to maximize form contact • Magnet possesses great magnetic strength, high residual magnetism, strong coercive force and good stability • Mandrels offer excellent chemical and abrasion resistance • Available for inside or outside mount • Compatible with wet and dry applications SPECIALLY DESIGNED MANDREL AND MAGNETIC HOLDER The Company With Connections The Company With Connections ® KEY ADVANTAGES A•LOK PRODUCTS INCORPORATED P.O. BOX 1647 • 697 Main Street • Tullytown, PA 19007 • www.a-lok.com • email: [email protected] 800-822-2565 • 215-547-3366 • 215-547-5260 FAX WARNING • DO NOT SUBJECT MAGNETS TO BLUNT FORCE IMPACT. • PROLONGED TEMPERATURES ABOVE 160°F WILL CAUSE LOSS OF MAGNETIC ENERGY. • DO NOT WELD NEAR MAGNETS. • AVOID HIGH ELECTRICAL CURRENTS NEAR MAGNETS. © 2019
Transcript of A-LOK Magnetic MandrelsMAGNETIC MANDREL SYSTEM MAGNET ASSEMBLY CONFIGURATION SPECIALLY DESIGNED...
MAGNETIC MANDREL SYSTEMA•LOK MAGNETIC MANDREL SYSTEM
• Faster set-up
• No drilling or cutting of core
• Special curved magnet face to maximizeform contact
• Magnet possesses great magnetic strength,high residual magnetism, strong coerciveforce and good stability
• Mandrels offer excellent chemical andabrasion resistance
• Available for inside or outside mount
• Compatible with wet and dry applications
SPECIALLY DESIGNED MANDREL AND MAGNETIC HOLDER
The Company With ConnectionsThe Company With Connections®
KEY ADVANTAGES
A•LOK PRODUCTS INCORPORATED P.O. BOX 1647 • 697 Main Street • Tullytown, PA 19007 • www.a-lok.com • email: [email protected] • 215-547-3366 • 215-547-5260 FAX
WARNING• DO NOT SUBJECT MAGNETS TO BLUNT FORCE IMPACT.• PROLONGED TEMPERATURES ABOVE 160°F WILL CAUSE LOSS OF MAGNETIC ENERGY.• DO NOT WELD NEAR MAGNETS.• AVOID HIGH ELECTRICAL CURRENTS NEAR MAGNETS.
© 2019
MAGNETIC MANDREL SYSTEMMAGNET ASSEMBLY CONFIGURATION
SPECIALLY DESIGNED MANDREL AND MAGNETIC HOLDER
The Company With ConnectionsThe Company With Connections®
A•LOK PRODUCTS INCORPORATED P.O. BOX 1647 • 697 Main Street • Tullytown, PA 19007 • www.a-lok.com • email: [email protected] • 215-547-3366 • 215-547-5260 FAX
CAUTION E E E E E
E E EE E E E E EE E E E E E E E E E E
E E E E E E E E E E E E
E E E E E E E E
2.5”
4 9/16”HEIGHT
5 9/16”
7 9/16”HEIGHT
HEIGHT
Standard Magnet Setup
U-Shape Up Setup
U-Shape Down i h 3” Shim Setup
U-Shape Up with 3” Shim Setup
MAGNET U-SHAPE PORTION MUST BE POSITIONED WITHIN THE MAGNET CUTOUT IN THE MANDREL
TO DETERMINE MAGNET CONFIGURATION:
MEASURE BETWEEN CORE AND
MAGNET CUT OUT AS ILLUSTRATED
A-LOK MAGNETICMANDREL
IMPORTANT
HEIGHT
Extenson Kit
© 2019
Standard Magnet Setup 2.5” Height
U-Shape Setup 4 9/16” Height
U-Shape Down with 3” Shim Setup5 9/16” Height
U-Shape Up with 3” Shim Setup 7 9/16” Height
© 2019
*NEW*Round Magnet System
![ADAPTATION CLAMPING DEVICES MANDO Adapt [mandrel adaptation] · PDF fileMANDO Adapt T212 SE. Order overview Suitable for ADAPTATION CLAMPING DEVICES MANDO Adapt [mandrel adaptation]](https://static.fdocuments.net/doc/165x107/5a78bf117f8b9a07028d99a0/adaptation-clamping-devices-mando-adapt-mandrel-adaptation-adapt-t212-se-order.jpg)
