An ISO 9000: 2001 registered company

A leader in adhesive and protective packaging solutions

Stellchem’s Mission Statement

Stellchem will provide customers with innovative solutions for their adhesive and protective packaging

needs in a dependable and supportive manner.

We will encompass a win-win-win atmosphere which includes suppliers and customers. This winning

environment will extend to all employees.

Stellchem will actively participate in this process in a professional and dependable manner, empowering all

to achieve excellence.

Stellchem 2000 is packaged in an ergonomically designed bottlefor ease of use.

Recommended Steps for Use of Stellchem 2000Minimize cost by controlling the amount applied to the

wood surface.Start by puncturing a hole on the tip of the bottle.

Take cap off

Remove a puncture

pin provided

Puncture hole

Remove puncture pin

Place extension onto bottle.

Maximize your control and decrease consumption of Stellchem 2000.

With the use of the extensions provided, Stellchem 2000 can be applied one drop at a time.

By not using extensions, the top of the bottle will eventually clog. You will then have to cut the bottle top.

A larger opening results in excessive use, therefore creating longer set time and higher costs. Do not use more than

necessary.

Correct use of Stellchem 2000 incorporates extension tips.

Apply Stellchem 2000 a drop at a time

Let sit for 15-20 seconds and wipe with cloth.

Let sit for 20 seconds to 2 minutes, then sand.

Product is now ready for finishing.

How to use Stellchem 2000 with Excellerator 7A11F

Apply Stellchem 2000. Wipe surface after 5–10 seconds.Spray Excellerator 7A11F at a distance of 15- 25 centimeters

from the wood surface .

Allow to dry to ambient conditions then sand. Now your furniture is ready for finishing.

Note: Always allow wood to reach a moisture level of 6.2% to 7.8% prior to finishing.

For additional information feel free to contact Stellchem toll free at 1-888-648-1219.

Note: Stellchem 2000 is available in thicker versions to meet your specific requirements 2010 and 2030.

These products can be used for repairing worm holes,larger repair spots and cabinet edges.

Additional products like Stellchem’s Debonder CA00are available for those occasional accidents.

More tips and puncture pins can be ordered as well.

Let Stellchem help your firm save time and money with our full line of adhesives: water-based, solvent-based,

hot melts and specialty adhesives.

Corrufoam,the ultimate in protective packaging for your finished goods.

Corrufoam’s one step process reduces the bottleneck and frustration in your packaging department

Available in 1-sided or 2-sided protection customized to your specifications

Shipping Damage - Free ?Corrufoam the Best Protection For Your

Finished Goods

Resists scuffs & scratches

Impact Resistant

Reduces labour costs

Improved inventory control

Product arrives damage free

ISO 9001:2000 Certified

High performance corrugated & polyethylene (PE) foam

Here’s 5 Reasons Why

1-888-648-1219