A Green Product that is good for the Environment and … XL 29 Pitchbook... · good for the...
Transcript of A Green Product that is good for the Environment and … XL 29 Pitchbook... · good for the...
A Green Product that is good for the Environment and Extraordinary for your home.
AMERICA’S 1ST CHOICEIn Exterior Cladding.
Eliminator XL 29With the Glide-Lock Attachment System™
If you had your choice,
wouldn’t you want beauty PLUS performance.
Homeowners don’t want to just cover up their old siding!
They want the natural beauty of wood PLUS high performance technology
Your home is the single largest investment you have
“your most Valuable possession”
Realtor Magazine Shows that homeowners
can recoup from 80% to 120% of the cost of
upscale siding† Remodel Magazine 2006 Cost Value report
National average is 95%*
Can any system deliver all four?
Let’s look at your options!
What are people really looking for in siding?
1. ―I want a siding that can save me $$$ on my energy bill‖
2. ―I want a seamless appearance‖
3. ―I want it to look and feel like freshly painted wood. Without the maintenance‖
4. ―I don’t want to paint again…ever‖
Wood siding means costly painting and re-painting
Wood siding has many
Disadvantages:
• Rots
• Peels
• Flakes
• Blisters
• Attracts termites
Consider the Cost of Painting…
If you painted every 3-5 years you could RENT
a paint job for $10,000 to $25,000 Dollars!
Consider the Cost of Painting…
Tables based upon repainting every 5
years, with a 5% rate of inflation
each year. They will help you
determine how much you will save
over the high cost of painting over
a period of only 15 years.
If you pay $5,000 dollars per Painting…
Cost per Cumulative
Painting Cost
Present $5,000 ($5,000)
5 years $5,250 ($10,250)
10 years $5,513 ($15,763)
15years $5,788 ($21,551)
If you pay $7,000 per painting…
Present $7,000 ($7,000)
5 years $7,350 ($14,350)
10 years $7,718 ($22,068)
15 years $8103 ($30,171)
If you pay $9,000 per painting…
Present $9,000 ($9,000)
5 years $9,450 ($18,450)
10 years $9,923 ($28,373)
15 years $10,418 ($38,791)
Fiber cement siding looks great at first, but…
Fiber cement siding has many disadvantages:
It has to be primed and painted on both sides – and re-painted over the years
Cement siding absorbs moisture. (voids warranty to install or paint it when wet)
Cement Siding is not rigid – it follows the contours of wavy walls, cracks easily
Dust from cutting cement siding is considered a serious health hazard. *not covered by many insurance policies
Highly susceptible to freeze/thaw cycle causing damage from expansion and contraction
Not energy efficient
NO warranty on Labor, limited on material
(Wavy Walls)
(Painted Wet)
(Cracked)
(Holds Moisture)
Steel Siding
will chalk, dent… and rust!
Steel siding will scratch, dent, chalk, and fade. Metal siding can even rust.
Metal is not energy efficient
ORDINARY VINYL…
Can look beautiful when new.
• No painting or staining
• Won’t peel or chip
• No insect infestation
• No denting
• No scratching
BUT WILL IT STAY BEAUTIFUL…
FOR YOUR LIFETIME?
Ordinary Vinyl is not the best solution to a life long challenge
Seams make for an unattractive appearance.
- Wind can penetrate the laps and seams caused by ordinary siding, lifting and bending it
- This results in energy loss
Over Time Ordinary Vinyl Siding will…
• Crack
• Fade
• Warp
• Bow
• Lose Structure
The Eliminator XL 29 insulated panel with the Glide Lock Attachment System is Longer, Stronger, Thicker and has fewer seams than all the rest!
And over time, ordinary vinyl siding lacks the strength and durability to resist…
• Impact damage
• Wind damage
• Hail damage
• Brittleness when cold
WHY COMPROMISE?
Eliminator XL 29 Glide-Lock Patented Glide Lock System
The ―Only‖ 29ft panel
Over 270 mph Windload rating
30% Energy Savings Pledge
Up to 7.25 R-value
Thicker than most ordinary siding
500% Greater impact resistance
Moisture control to reduce mold & mildew
Not a fuel source or food source
Virtually Seamless
5 times more durability
Lifetime Warranty includes fadingEliminator XL 29
Eliminator XL 29 Glide-Lock Insulated Siding SystemStraight and solid
• Adds strength and rigidity
• Energy efficient
• Fills hollow void
• Allows home to breathe
• Reduce mold and mildew
• Does not contribute to
―sick home‖ syndrome
Eliminator XL 29 Insulated Siding system
Will Cut Your Energy Costs
IT’S Eliminator XL 29 of course!
Eliminator XL 29with Glide-Lock Attachment System
Provides a Lifetime of Protection
for YOU!
Lifetime Fade protection
Won’t warp, crack, peel, flake, or blister
Made in the USA
100% Peace of mind installation guaranty
Not just ordinary, It’s EXTRAORDINARY Siding
Finally!Siding that combines beauty and performance!
Maximum Performance and Seamless Beauty!
Siding that doesn’t chalk, fade, crack, wave
Resistant to wind, weather, impact, insects
Free of unsightly seams
Solid, durable, energy efficient and
maintenance free
There are several reasons why Eliminator XL 29 is the ONLY choice
• Energy Savings
• Durability
• No painting or staining--EVER
• Unsurpassed Appearance—Virtually Seamless!
Seams or No Seams
What are the 2 Notable Dissatisfactions with siding…
Visible Seams and Panel Warping!
Every manufacturer of vinyl siding requires that, EVERYnail be placed in exactly the right place at exactly the right angle & exactly the right depth. That is 1/32 of an inch. (the thickness of a dime)
ANY deviation causes warping and bowing.
With over 3,000 nails going into the average house…it’s virtually impossible for installers to achieve!
The Eliminator XL 29 with the patented
Glide-Lock attachment system is the ONLYsiding in the industry that can achieve a perfect installation
The Glide-Lock system uses screws with ferrule stud guides to ensure proper angles and screw depth…EVERY time!
Patented “Glide-Lock” System
There are 2 major dissatisfactions related to vinyl siding… Seams and warping or bowing!
How do you “Eliminate” these 2 problems
You design a system even Uncle Sam says is ―unique‖ and ―innovative‖ beyond all the rest!
• Pre-placed ferrule studs every 4‖
-ensure perfect screw and Stud alignment
• Unlike nails, screws will not pull out over time
• Ensure Proper Installation…Every time!
• NO finger pointing on Warranty
-Can’t blame the installer anymore
Patented “Glide-Lock” System
No Seams
&
Straight Walls
Glide-Lock in action
With High R Backing
Allows for proper expansion and
contraction
Patented Fastening System
5x greater impact resistance
Eliminator XL 29 Glide-Lock Siding System
stands up to almost anything Mother Nature (or your kids) can throw at it!
Ordinary Vinyl Siding vs. Eliminator XL 29 Siding System
Eliminator XL 29 Siding resists Fading & Buckling
Enjoy the look and feel of freshly painted wood, without the maintenance!
To ensure long-lasting color we have chosen to use only the best UV inhibitors and Non-chalking Titanium Dioxide
Would this be acceptable on your home…?
Eliminator XL 29..
the industries strongest factory warranty!
Eliminator XL 29 Glide-LockCertificate of Guarantee
We herby Guarantee against buckling, warping, wind blow off less than 270 mph and all labor for as long as the home on which the siding is installed is habitable. Exclusions include damages caused by acts of God, natural or man-made disasters or any abuse not
directly related to product manufacturing and or installation. Furthermore providing the installation is performed by an authorized dealer and factory trained installation team
Presented To:
Dated:
authorized dealer name, title and installation manager name
Save Energy
Eliminator XL 29 Siding with Full Contoured Foam Backing offers protection against Mold and Mildew
Ordinary vinyl siding with commonly used flat underlayments can trap moisture that can result in the growth of mold and mildew.
Mold damage is not covered on most home insurance policies.
FOR IMMEDIATE RELEASE Contact: Deniz Carroll 800-607-3772
Testing Confirms EPS is Mold Resistant
The EPS Molders Association (EPSMA) sponsored a test program focusing on EPS and mold resistance. EPSMA contracted SGS U.S. Testing Company for test services on EPS using ASTM C1338 “Standard Method for Determining Fungi Resistance of Insulation Materials and Facings.” The objective of the test program was to provide conclusive evidence that EPS does not support the growth of mold and fungi. Samples of Type I EPS as prescribed in ASTM C578 and CAN/ULC S701, representing the typical product for most building and construction applications, were submitted for testing. The ASTM protocol subjected the EPS to the following fungi:
• Aspergillus niger • Aspergillus versicolor • Penicillium funiculosum • Chaetomium globosum • Aspergillus flavus
The results show that in a laboratory under ideal growth conditions, the fungi did not grow on the expanded polystyrene samples. Expanded polystyrene building products provide the performance benefits needed for a healthy home. In addition to mold resistance, its energy efficiency was tested during a three-month research study conducted by NAHB Research Center. Results concluded that homes constructed with ICFs outperformed wood frame homes saving the homeowner 20 percent in heating and cooling costs. In other studies, EPS roof insulation retained its original insulating value up to and beyond fifteen years of use thus EPS can be specified without adjusting the R-value for aging. EPS building insulation does not emit volatile organic compounds (VOCs) during or after installation creating a “clean” breathing environment. Pentane is the blowing agent used in the manufacture of EPS, and does not contribute to the depletion of the stratospheric ozone layer. EPS manufacturers recapture up to 95% of the pentane released during the manufacturing process by installing state of the art emission abatement equipment. A technical bulletin from the EPS Molders Association on mold resistant expanded polystyrene is attached. The EPS Molders Association represents expanded polystyrene manufacturers throughout the US and Canada. For more information on EPS performance in building and construction applications, please contact the EPS Molders Association at 800-607-3772 or visit www.epsmolders.org. Eliminator XL contoured and flat insulation are EPS products.
# # # # #
1298 Cronson Blvd., Suite 201 Crofton, MD 21114 (800) 607-3772 [email protected]
SWWP House Wrap™
•Traditional Protection from…
-Wind and Water Penetration
•Breathable System with a Perm rate of 15
The Thermal Envelope & Complete Moisture Control System
High ―R‖- Value
Contoured Insulation delivering up to 5 times the insulation value of ordinary siding
A ―Breathable‖ System
5 times the impact resistance
Why should you install fully vented Soffit?
Air always contains water
When Hot and cold air meet, condensation occurs
Condensation can damage wood, plaster, paint and insulation
Damp conditions can lead to mold and mildew growth
Most states allow exclusion of mold damage from homeowner insurance policies
Ventilation is critical to help eliminate damage to your home
What the experts Recommend
Protect your shingles and maintain their warranty
Maximum ventilation ensures a healthy home for years to come.
Ventilation System
Your Choices…
As Ventilation Increases, the Looks begin to decrease……
What If you could get …. BOTH ?
Invisible Air Canal Channel Vents.
Dual Channels Prevent Sagging.
Freshly Painted look
The Look you want …. The Air flow you NEED!
Eliminator XL 29 Siding System pays for itself with Resale Value and Fuel Savings.
When would you like to start saving on your energy bill?
SAVE AT LEAST
30%on your heating
& cooling bills.
Guaranteed!
Energy Pay Back
How much
$ Money $
could it
Really be?
$31,955.70
$13,595.30
In Savings!
$2,400 Year 1
$2,760 Year 2
$3,174 Year 3
$3,650 Year 4
$4,197 Year 5
$4,827 Year 6
$5310 Year 7
$5841 Year 8
$6425 Year 9
$7067 Year10
$45,651 x 70% =
$31,955.70
Energy cost of 200 dollars per month & 15% increase each year
Investment Payback(Over the next 10 years)
•$13,595.30 in Energy Savings (SAVE)
•$8,000 in Painting and Maintenance Cost (SAVE)
$21595.30 Dollars (cost to keep what you have)
•Remodel Magazine Cost vs. Value Says you will recoup…
•An average of 87% of the price of the original job in
the country!
Actual Photo - New Jersey
Actual Photo – New York SEAMLESS BEAUTY
Short Cuts
To Savings!
NO WAY !!Please get me the Eliminator XL 29 Glide-Lock Siding.
I Just Can’t Do IT !!VSI and my siding manufacture wants me to drive almost 3000 nails in this siding, NOT up, NOT down, Not to the left or tothe right, center of this nailing slot and then leave 1/32” of a gap between the siding and the wall. (the thickness of one thin dime)
I do not even have a dime on me to check the proper gaping ? There is NO WAY I can Do it, look the siding is buckling already.
Please get me the Eliminator XL 29 Glide-LockIt is the ONLY way I will be able to installsiding properly and provide the homeownerwith a true guarantee.