A 3-Step Pre-Startup guide to setting up a DPO70000SX ...
1
Master Master PCIe bus Trigger Trigger Clock Clock Extension B Extension C Extension D Extension 3 1 2 PCIe bus 3 2 1 3 2 1 PCIe bus Trigger Clock UltraSync bus cable will connect any Multi-Instrument Configuration capable unit. Required for 2 instrument configuration Required for 3 instrument configuration Required for 4 instrument configuration Connect each Extension to Master sequentially from left to right. Connect extensions to master in star pattern, do not daisy chain units. Cables must be connected to units prior to start-up, restart will be required if unit is turned on before connecting cables. Use electrostatic protection, including an antistatic wrist strap. Connecting UltraSync bus cable bundles on Master Select the master instrument At Master connect each UltraSync cable bundle set to ports designated “To Extension” 1. Connect Clock Out (8 in-lbs torque) 2. Connect Trigger 3. Connect PCIe Connecting UltraSync bus cable bundles on Extension At Extension connect each UltraSync cable bundle set to ports designated “To Master” 1. Connect Clock In (8 in-lbs torque) 2. Connect Trigger 3. Connect PCIe A 3-Step Pre-Startup guide to setting up a DPO70000SX Multi-Instrument Configuration UltraSync bus cable bundle Unit connection order Suggested UltraSync bus cable connection order 071-3369-02 *P071336902* Multi-Instrument Star Configuration cabling guide TM TM
Transcript of A 3-Step Pre-Startup guide to setting up a DPO70000SX ...
Master
Master
PCIe bus
Trigger
Trigger
Clock
Clock
Extension B
Extension C
Extension DExtension
31
2
PCIe bus
3
2
1
3
2 1
PCIe bus
Trigger
Clock
UltraSync bus cable will connect any Multi-Instrument Configuration capable unit.
Required for 2instrument configuration
Required for3 instrument configuration
Required for4 instrument configuration
Connect each Extension to Master sequentially from left to right.Connect extensions to master in star pattern, do not daisy chain units.
Cables must be connected to units prior to start-up, restart will be required if unit is turned on before connecting cables. Use electrostatic protection, including an antistatic wrist strap.
Connecting UltraSync bus cable bundles on Master
Select the master instrumentAt Master connect each UltraSync cable bundle set to ports designated
“To Extension”1. Connect Clock Out (8 in-lbs torque)2. Connect Trigger3. Connect PCIe
Connecting UltraSync bus cable bundles on Extension
At Extension connect each UltraSync cable bundle set to ports designated
“To Master”1. Connect Clock In (8 in-lbs torque)2. Connect Trigger3. Connect PCIe
A 3-Step Pre-Startup guide to setting up a DPO70000SX Multi-Instrument Configuration
UltraSync bus cable bundle Unit connection order
Suggested UltraSync bus cable connection order
071-3369-02*P071336902*
Multi-Instrument Star Configuration cabling guideTM
TM
