95th Anniversary of GUM Warszawa, 20 May 2014 1 Opportunities of EMPIR At the occasion of the...
-
Upload
clinton-ryan -
Category
Documents
-
view
219 -
download
0
Transcript of 95th Anniversary of GUM Warszawa, 20 May 2014 1 Opportunities of EMPIR At the occasion of the...
95th Anniversary of GUMWarszawa, 20 May 2014 1
Opportunities of EMPIRAt the occasion of the
celebration of the
95th Anniversary of GUMWarszaw, 20 May 2014
Jörn Stenger, EMRP/EMPIR chair, EURAMET
Member of Presidential Board, PTB
95th Anniversary of GUMWarszawa, 20 May 2014 2
Needs towards metrology research
Secure measurementsand reference data
Do/underpinbasic science
Drive innvovation
do you get what you
pay for?
safely below radiation limits?
do constants of nature drift with time?
efficiency?quality control in production?
data quality for policy making
sufficient?
precise enough to be
competitive?
Precise, correct, traceable measurements are needed virtually everywhere
95th Anniversary of GUMWarszawa, 20 May 2014 3
Fundamental Metrology Research
Core Measurement Capabilities in NMIs and DIs
Challenge-driven Metrology R&D
Innovation driven Metrology R&D
Fundamental Research and Capacity Building
Enhancement of Metrology in relation to SI
Pre-normative Metrology R&D
Dissemination and
Exploitation
Take-up by Industry
and Society
Research and Development
Outcomes:Better science,
Regulation,Standardisation,
Industrial Competitiveness
,...
Outputs:Scientific
publications,Technology
Transfer,Standards, ...
Metrology Research needed all over the Value Creation Chain
extension
extension
extension
95th Anniversary of GUMWarszawa, 20 May 2014 4
EMRP EMPIR timeline
2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022
iMERA-plus
400 M€, 1/2 from EU, 5 calls
Horizon 2020FP7
finalize projects5 EMRP calls
finalize projects
7 EMPIR callsproposed: 600 M€ (FC), 1/2 from EU
Preparation
- 15 April 2014: Approval by EU Parliament- 6 May 2014: Approval by Council
→ Co-decision complete!
95th Anniversary of GUMWarszawa, 20 May 2014 5
Metrology improves health care e.g. by earlier detection of diseases and patient protection e.g. from radiation, and fosters the competitiveness of related European industries and services.
Healthcare
Energy
Metrology for energy supports the successful implementation of smart electrical grids in Europe or improves efficiency in
traditional power plants with a considerable impact on reducing energy consumption and reduction of emissions.
Environment
Metrology for environment provides improved measurements for better understanding of the Earth’s weather and climate. It makes space-based measurements consistent for comparisons with data from other sources.
EMRP projects addressing Grand Challenges
Current EMRP portfolio: 17 health, nine energyand nine environment projects. Final EMRP Call addresses Energy and Environment
95th Anniversary of GUMWarszawa, 20 May 2014 6
Metrology enables coping with the increasingly high operational speeds of modern electronic equipment in the European electronics industry.
EMRP projects to drive innovation in industry
30 running “industry” metrology projects and
nine “new technologies” metrology projects
Metrology allows embedding nano-objects to improve products such as high strength concrete. For this, mechanical properties of nano-objects are measured such as nanoparticles, nanowires, nanoscale
structures and composite materials.
Metrology supports exploitation of advanced high-pressure technologies in industry, e.g. the application of high pressures in the manufacturing of direct injection fuel systems, which have improved petrol and diesel engine performance.
95th Anniversary of GUMWarszawa, 20 May 2014 7
Participation of GUM in EMRP projects
95th Anniversary of GUMWarszawa, 20 May 2014 8
EMRPAustriaBelgiumBosnia-HerzegovinaCzech Republic DenmarkEstoniaFinlandFranceGermanyHungaryItalyNetherlands NorwayPolandPortugalRomaniaSlovakiaSlovenia SpainSwedenSwitzerlandTurkeyUKEC
IntegrationCalls 2009-2013
iMERA-PlusAustriaBelgiumCzech Republic DenmarkEstoniaFinlandFranceGermanyItalyNetherlands NorwayPortugalRomaniaSlovakiaSlovenia SpainSwedenSwitzerlandTurkeyUKEC
CollaborationCall 2007
iMERACzech Republic DenmarkFinlandFranceGermanyItalyNetherlands NorwayPolandSlovakiaSlovenia SwedenSwitzerlandUKEC
Coordination
MERACzech Republic DenmarkFranceGermanyIrelandItalyNetherlands Norway SwedenSwitzerlandUK
Cooperation
EMPIRAustriaBelgiumBosnia-HerzegovinaBulgariaCroatiaCzech Republic DenmarkEstoniaFinlandFranceGermanyGreeceHungaryIrelandItalyNetherlands NorwayPolandPortugalRomaniaSerbiaSlovakiaSlovenia SpainSwedenSwitzerlandTurkeyUK
Reach OutCalls 2014 - 2020
2002 ...
... 2024 ...
A 20-years’ initiative of joint research
95th Anniversary of GUMWarszawa, 20 May 2014 9
Austria 840.000 Belgium 1.200.000 Bosnia and Herzegovina 920.000 Bulgaria 840.000 Croatia 700.000 Czech Republic 8.600.000 Denmark 3.710.000 Estonia 910.000 Finland 12.000.000 France 27.000.000 Germany 88.000.000 Greece 0 Hungary 1.050.000 Ireland 600.000
Italy 24.000.000 Netherlands 16.500.000 Norway 3.750.000 Poland 2.500.000 Portugal 840.000 Romania 2.000.000 Serbia 700.000 Slovakia 200.000 Slovenia 2.249.333 Spain 6.000.000 Sweden* 5.133.333 Switzerland** 10.500.000 Turkey 12.000.000 United Kingdom 83.000.000 TOTAL 315.742.666
National Commitments for EMPIR
* The amount is calculated from an overall commitment of 1.1 mio € per annum
** Switzerland´s association status is currently on hold
95th Anniversary of GUMWarszawa, 20 May 2014 10
EMPIR broadens the scope, dedicated modules
Module 1: Science
Fundamental scientific metrology TP FUN48%
Grand challenges Energy, Environment, Health TP ENG, ENV, HEA
Module 2: Innovation
Industry-driven joint research TP IND22%
Technology-transfer projects Extensions
Module 3: Prenorm. Metrology R&D for standardization Extensions
TP PNORM 10%
Module 4: Capacity building
R&D for measurement capabilities TP SITP RPot
15%Capacity building projects
Programme management and administration Central support for CB and Innovation 5%
EMPIR Activities
The main activities of EMPIR shall consist of the following joint research and technological development actions:
A scientific-technical programme which supports fundamental scientific metrology laying the basis for all successive steps including applied metrology research and development and metrology related services;
Metrology research into societal challenges focusing on contributions for energy, environment and health;
Research into novel measurement instrumentation aiming at industrial take-up of metrological technologies to stimulate innovation in industry;
Pre-normative and co-normative metrology research and development for priority documentary standards aiming to use the expertise of metrology institutes in Europe to support policy implementation and accelerate innovative products and services to market;
Metrology capacity-building activities on different technological levels aiming to achieve a balanced and integrated metrology system in Europe.
EMPIR Activities (cont.)
The main activities shall be carried out by NMI and DI.
EMPIR shall encourage and support the participation of other entities. This approach is expected to lead to around 15% of the budget of EMPIR going to those entities.
In addition: Support services to increase exploitation and deployment of metrology
research from on-going projects and to build on knowledge in order to achieve greater socio-economic impacts.
Activities specifically addressing metrology institutes with no or limited scientific capabilities, by supporting them in using other European, national or regional programmes for training and mobility, cross-border cooperation or investment in metrology infrastructure.
Networking activities to promote EMPIR and maximise its impact.
95th Anniversary of GUMWarszawa, 20 May 2014 13
• PRT -> SRT and alternatives
• Administration: Guides and templates
• Contracts• Decision making• Advice
• Project types• Grant agreements• Performance indicators
(outputs and outcomes)
• Strategic Research Agenda
• Annual Work Plans
R&D topics
Instru-ments
Pro-cesses
Gover-nance
long-term strategydeveloped by EURAMET
project types developed for EMPIR purposes
two steps for proposals,review conference
governance in EURAMET(delegation agreement)
What makes EMPIR unique
95th Anniversary of GUMWarszawa, 20 May 2014 14
EMPIRAustriaBelgiumBosnia-HerzegovinaBulgariaCroatiaCzech Republic DenmarkEstoniaFinlandFranceGermanyGreeceHungaryIrelandItalyNetherlands NorwayPolandPortugalRomaniaSerbiaSlovakiaSlovenia SpainSwedenSwitzerlandTurkeyUK
• have done good research• have served needs from industry and regulation
• have established a sound, efficient, effective, balanced, smartly specialised metrology landscape in Europe
A 20-years’ initiative of joint research
Cyprus