94/9/EC SAFETY CODE: c EN 13463-1 EN 13463-5 … · with European Standards EN 13463-1 and EN...
2
All leaflets are available on: www.asconumatics.eu PIC-14-15-GB 80434GB-2014/R01 IN OUT FEATURES • Stainless steel filter/regulator intended for use in potentially explosive atmospheres caused by gases, vapours, mists and/or dust according to: (ATEX directive 94/9/EC). SAFETY CODE: ` II 2G/D c IIC X T85°C (T6) (ZONE 1-21) Explosion group IIC • Compliance with the essential health and safety requirements has been assured with European Standards EN 13463-1 and EN 13463-5 • Filter/Regulator with reinforced diaphragm with PTFE lining and all metal parts in 316L stainless steel for a standard pressure of max. 20 bar • Built-in overpressure relieving function • Filtering effect by centrifugation of the air and 50 microns filtering element • Large operating temperature -40°C to +80°C • Body, bonnet and internal parts in 316L stainless steel according to ASTM A 182/NACE MR 01.75 • Large bowl capacity GENERAL Fluids Compressed air and neutral gas Ports 1/4 NPT and 1/2 NPT Maximum inlet pressure 20 bar (16 bar for automatic drain) Adjustable pressure 0,8 to 8 bar [1bar = 100 kPa] Hysteresis < 0,2 bar Filtering size 50 µm Ambient temperature -40° to +80°C ¬ Maximum flow (Qv at 6.3 bar) See specifications and charts CONSTRUCTION Body AISI 316L SS Bowl AISI 316L SS Filtering element AISI 316L SS Diaphragm EPDM with PTFE lining and NBR O-rings Condensate drain Manual drain Pressure adjusting screw Allen head screw with locking nut ¬ -50/-55/-60°C low temperature options are available on request. SPECIFICATIONS port size type bowl capacity filtering capacity adjustable pressure maximum flow at 6,3 bar pressure setpoint and DP of 1 bar/setpoint catalogue number FILTER / REGULATOR gauge connection NPT without pressure gauge with 316L SS pressure gauge NPT (cl) (µm) (bar) l/min. (ANR) dm 3 /s (ANR) 50 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel 1/4 1/2 314 ST 312 ST 130 180 50 50 0,8 - 8 0,8 - 8 800 (1) 1500 (2) 14 25 1/4 1/4 34208001 34208003 34208002 34208004 5 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel 1/4 1/2 314 ST 312 ST 130 180 5 5 0,8 - 8 0,8 - 8 680 (3) 1275 (4) 14 25 1/4 1/4 34208005 34208007 34208006 34208008 50 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel - Automatic Drain 1/4 1/2 314 ST 312 ST 130 180 50 50 0,8 - 8 0,8 - 8 800 (1) 1500 (2) 14 25 1/4 1/4 34208011 34208013 34208012 34208014 5 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel - Automatic Drain 1/4 1/2 314 ST 312 ST 130 180 5 5 0,8 - 8 0,8 - 8 680 (3) 1275 (4) 14 25 1/4 1/4 34208015 34208017 34208016 34208018 (1) KV = 0,67 [m 3 /h] and 11,1 [l/min] (3) KV = 0,56 [m 3 /h] and 9,3 [l/min] (2) KV = 1,25 [m 3 /h] and 20,8 [l/min] (4) KV = 1,06 [m 3 /h] and 17,6 [l/min] FILTER/REGULATOR Full 316L Stainless Steel 1/4 - 1/2 Air service equipment Series 342 OBSOLETE DOCUMENTATION Please check the product availability
Transcript of 94/9/EC SAFETY CODE: c EN 13463-1 EN 13463-5 … · with European Standards EN 13463-1 and EN...
All leaflets are available on: www.asconumatics.eu
PIC-14-15-GB
8043
4GB
-201
4/R
01
IN OUT
FEATURES• Stainless steel filter/regulator intended for use in potentially explosive
atmospheres caused by gases, vapours, mists and/or dust according to: (ATEX directive 94/9/EC). SAFETY CODE: ` II 2G/D c IIC X T85°C (T6) (ZONE 1-21) Explosion group IIC
• Compliance with the essential health and safety requirements has been assured with European Standards EN 13463-1 and EN 13463-5
• Filter/Regulator with reinforced diaphragm with PTFE lining and all metal parts in 316L stainless steel for a standard pressure of max. 20 bar
• Built-in overpressure relieving function• Filtering effect by centrifugation of the air and 50 microns filtering element• Large operating temperature -40°C to +80°C • Body, bonnet and internal parts in 316L stainless steel according to
ASTM A 182/NACE MR 01.75• Large bowl capacity
GENERAL Fluids Compressed air and neutral gasPorts 1/4 NPT and 1/2 NPTMaximum inlet pressure 20 bar (16 bar for automatic drain)Adjustable pressure 0,8 to 8 bar [1bar = 100 kPa]Hysteresis < 0,2 barFiltering size 50 µm Ambient temperature -40° to +80°C¬
Maximum flow (Qv at 6.3 bar) See specifications and charts
CONSTRUCTIONBody AISI 316L SSBowl AISI 316L SSFiltering element AISI 316L SSDiaphragm EPDM with PTFE lining and NBR O-ringsCondensate drain Manual drainPressure adjusting screw Allen head screw with locking nut¬ -50/-55/-60°C low temperature options are available on request.
SPECIFICATIONS
portsize type
bowl capacity
filtering capacity
adjustable pressure
maximum flowat 6,3 bar pressure setpoint
and DP of 1 bar/setpoint
catalogue numberFILTER / REGULATOR
gaugeconnection
NPT
withoutpressure gauge
with 316L SSpressure gaugeNPT (cl) (µm) (bar) l/min. (ANR) dm3/s (ANR)
50 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel1/41/2
314 ST312 ST
130180
5050
0,8 - 80,8 - 8
800(1)
1500(2)
1425
1/41/4
3420800134208003
3420800234208004
5 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel1/41/2
314 ST312 ST
130180
55
0,8 - 80,8 - 8
680(3)
1275(4)
1425
1/41/4
3420800534208007
3420800634208008
50 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel - Automatic Drain1/41/2
314 ST312 ST
130180
5050
0,8 - 80,8 - 8
800(1)
1500(2)
1425
1/41/4
3420801134208013
3420801234208014
5 µm filtration 0,8 - 8 bar adjustment - 316L Stainless Steel - Automatic Drain1/41/2
314 ST312 ST
130180
55
0,8 - 80,8 - 8
680(3)
1275(4)
1425
1/41/4
3420801534208017
3420801634208018
(1) KV = 0,67 [m3/h] and 11,1 [l/min] (3) KV = 0,56 [m3/h] and 9,3 [l/min](2) KV = 1,25 [m3/h] and 20,8 [l/min] (4) KV = 1,06 [m3/h] and 17,6 [l/min]
FILTER/REGULATORFull 316L Stainless Steel
1/4 - 1/2
Air service equipment
Series
342
OBSOLETE DOCUMENTATIO
N
Please
chec
k the p
roduct
avail
abilit
y
All leaflets are available on: www.asconumatics.eu
14-15-2
PIC
-14-
0015
-GB
--
Ava
ilabi
lity,
des
ign
and
spec
ifica
tions
are
sub
ject
to c
hang
e w
ithou
t not
ice.
All
right
s re
serv
ed.
8043
4GB
-201
4/R
01
SERIES 342
DIMENSIONS (mm), WEIGHT (kg)
INSTALLATION
● Installation/maintenance instructions are included with each filter/regulator ● Filter/Regulator must be installed with the bowl in vertical position ● Air flow direction indicated by an arrow ● Pipe connection has standard thread according to NPT (ANSI 1.20.3)
ADDITIONAL OPTIONS
● Other pipe threads are available on request● Threaded connections BSP or with flanges● EPDM/FPM gaskets● With a 5 µm filtering element the max. flow is reduced by approx. 15%● Stainless steel pressure gauge (0-10 bar scale division), kit number: C117814. Other scale divisions on request
catalogue number A B C ØD E weight
34208001/002/005/006 60 264 257 1/4 1,5 1,35 kg
34208003/004/007/008 70 270 265 1/2 5 1,90 kg
34208011/012/015/016 60 264 257 1/4 1,5 1,55 kg
34208013/014/017/018 70 270 265 1/2 5 2,10 kg
A
A
Ø D
M6
E7,5
~B
(au
tom
atic
dra
in)
- ~
C (
man
ual d
rain
)
32= =
MOUNTING BRACKET
0
1
2
3
4
5
6
7
8
0 50 100 150 200 250 300o
utl
et p
ress
ure
(bar
g)
flow [Nm3/h]
FR - Type 312 ST
0
1
2
3
4
5
6
7
8
0 50 100 150 200 250 300
ou
tlet
pre
ssu
re (b
arg
)
flow [Nm3/h]
FR - Type 314 ST
PRESSURE DROP vs. AIR FLOW CURVEat 20 barg inlet pressure
2 8,5
6,5 7
53
7
21
38,5
6,5
32
66
22
Bracket kit number : C117813
spare parts kits
catalogue number type filtration kit number
34208001/002/011/012 314 ST 50 µm C117873
34208003/004/013/014 312 ST 50 µm C117874
34208005/006/015/016 314 ST 5 µm C117875
34208007/008/017/018 312 ST 5 µm C117876
OPTIONS & ACCESSORIES
M5 threaded pressure relief
connection
1/4" NPT pressure gauge
connection
OBSOLETE DOCUMENTATIO
N
Please
chec
k the p
roduct
avail
abilit
y
