9.1 Chapter 9 Using Telephone

37
9.1 Chapter 9 Using Telephone and Cable Networks for Data Transmission Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Transcript of 9.1 Chapter 9 Using Telephone

Page 1: 9.1 Chapter 9 Using Telephone

9.1

Chapter 9

Using Telephoneand Cable Networks

for Data Transmission

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Page 2: 9.1 Chapter 9 Using Telephone

9.2

9-1 TELEPHONE NETWORK9-1 TELEPHONE NETWORK

Telephone networks use circuit switching. The Telephone networks use circuit switching. The telephone network had its beginnings in the late telephone network had its beginnings in the late 1800s. The entire network, which is referred to as the 1800s. The entire network, which is referred to as the plain old telephone systemplain old telephone system ( (POTSPOTS), was originally an ), was originally an analog system using analog signals to transmit voice.analog system using analog signals to transmit voice.

Major ComponentsLATAsSignalingServices Provided by Telephone Networks

Topics discussed in this section:Topics discussed in this section:

Page 3: 9.1 Chapter 9 Using Telephone

9.3

Figure 9.1 A telephone system

Endoffices

Local loop

Trunk

Tandemoffices Regional offices

Trunk

• • •

Page 4: 9.1 Chapter 9 Using Telephone

9.4

Intra-LATA services are provided by local exchange carriers.

Since 1996, there are twotypes of LECs: incumbent local

exchange carriers and competitive local exchange carriers.

Note

Page 5: 9.1 Chapter 9 Using Telephone

9.5

Figure 9.2 Switching offices in a LATA

Page 6: 9.1 Chapter 9 Using Telephone

9.6

Figure 9.3 Point of presences (POPs)

Page 7: 9.1 Chapter 9 Using Telephone

9.7

The tasks of data transfer and signaling are separated in modern telephone

networks: data transfer is done by one network, signaling by another.

Note

Page 8: 9.1 Chapter 9 Using Telephone

9.8

Figure 9.4 Data transfer and signaling networks

Page 9: 9.1 Chapter 9 Using Telephone

9.9

Figure 9.5 Layers in SS7

Page 10: 9.1 Chapter 9 Using Telephone

9.10

9-2 DIAL-UP MODEMS9-2 DIAL-UP MODEMS

Traditional telephone lines can carry frequencies Traditional telephone lines can carry frequencies between 300 and 3300 Hz, giving them a bandwidth of between 300 and 3300 Hz, giving them a bandwidth of 3000 Hz. All this range is used for transmitting voice, 3000 Hz. All this range is used for transmitting voice, where a great deal of interference and distortion can where a great deal of interference and distortion can be accepted without loss of intelligibility.be accepted without loss of intelligibility.

Modem StandardsTopics discussed in this section:Topics discussed in this section:

Page 11: 9.1 Chapter 9 Using Telephone

9.11

Figure 9.6 Telephone line bandwidth

Page 12: 9.1 Chapter 9 Using Telephone

9.12

Modemstands for modulator/demodulator.

Note

Page 13: 9.1 Chapter 9 Using Telephone

9.13

Figure 9.7 Modulation/demodulation

Page 14: 9.1 Chapter 9 Using Telephone

9.14

Figure 9.8 The V.32 and V.32bis constellation and bandwidth

Page 15: 9.1 Chapter 9 Using Telephone

9.15

Figure 9.9 Uploading and downloading in 56K modems

Page 16: 9.1 Chapter 9 Using Telephone

9.16

9-3 DIGITAL SUBSCRIBER LINE9-3 DIGITAL SUBSCRIBER LINE

After traditional modems reached their peak data rate, After traditional modems reached their peak data rate, telephone companies developed another technology, telephone companies developed another technology, DSL, to provide higher-speed access to the Internet. DSL, to provide higher-speed access to the Internet. Digital subscriber lineDigital subscriber line ( (DSLDSL) technology is one of the ) technology is one of the most promising for supporting high-speed digital most promising for supporting high-speed digital communication over the existing local loops. communication over the existing local loops.

ADSLADSL LiteHDSLSDSLVDSL

Topics discussed in this section:Topics discussed in this section:

Page 17: 9.1 Chapter 9 Using Telephone

9.17

ADSL is an asymmetric communication technology designed for residential

users; it is not suitable for businesses.

Note

Page 18: 9.1 Chapter 9 Using Telephone

9.18

The existing local loops can handle bandwidths up to 1.1 MHz.

Note

Page 19: 9.1 Chapter 9 Using Telephone

9.19

ADSL is an adaptive technology. The system uses a data ratebased on the condition of

the local loop line.

Note

Page 20: 9.1 Chapter 9 Using Telephone

9.20

Figure 9.10 Discrete multitone technique

Page 21: 9.1 Chapter 9 Using Telephone

9.21

Figure 9.11 Bandwidth division in ADSL

Page 22: 9.1 Chapter 9 Using Telephone

9.22

Figure 9.12 ADSL modem

Page 23: 9.1 Chapter 9 Using Telephone

9.23

Figure 9.13 DSLAM

Page 24: 9.1 Chapter 9 Using Telephone

9.24

Table 9.2 Summary of DSL technologies

Page 25: 9.1 Chapter 9 Using Telephone

9.25

9-4 CABLE TV NETWORKS9-4 CABLE TV NETWORKS

The The cable TV networkcable TV network started as a video service started as a video service provider, but it has moved to the business of Internet provider, but it has moved to the business of Internet access. In this section, we discuss cable TV networks access. In this section, we discuss cable TV networks per se; in Section 9.5 we discuss how this network can per se; in Section 9.5 we discuss how this network can be used to provide high-speed access to the Internet.be used to provide high-speed access to the Internet.

Traditional Cable NetworksHybrid Fiber-Coaxial (HFC) Network

Topics discussed in this section:Topics discussed in this section:

Page 26: 9.1 Chapter 9 Using Telephone

9.26

Figure 9.14 Traditional cable TV network

Page 27: 9.1 Chapter 9 Using Telephone

9.27

Communication in the traditional cable TV network is unidirectional.

Note

Page 28: 9.1 Chapter 9 Using Telephone

9.28

Figure 9.15 Hybrid fiber-coaxial (HFC) network

Page 29: 9.1 Chapter 9 Using Telephone

9.29

Communication in an HFC cable TV network can be bidirectional.

Note

Page 30: 9.1 Chapter 9 Using Telephone

9.30

9-5 CABLE TV FOR DATA TRANSFER9-5 CABLE TV FOR DATA TRANSFER

Cable companies are now competing with telephone Cable companies are now competing with telephone companies for the residential customer who wants companies for the residential customer who wants high-speed data transfer. In this section, we briefly high-speed data transfer. In this section, we briefly discuss this technology.discuss this technology.

BandwidthSharingCM and CMTSData Transmission Schemes: DOCSIS

Topics discussed in this section:Topics discussed in this section:

Page 31: 9.1 Chapter 9 Using Telephone

9.31

Figure 9.16 Division of coaxial cable band by CATV

Page 32: 9.1 Chapter 9 Using Telephone

9.32

Downstream data are modulated using the 64-QAM modulation technique.

Note

Page 33: 9.1 Chapter 9 Using Telephone

9.33

The theoretical downstream data rateis 30 Mbps.

Note

Page 34: 9.1 Chapter 9 Using Telephone

9.34

Upstream data are modulated using the QPSK modulation technique.

Note

Page 35: 9.1 Chapter 9 Using Telephone

9.35

The theoretical upstream data rate is 12 Mbps.

Note

Page 36: 9.1 Chapter 9 Using Telephone

9.36

Figure 9.17 Cable modem (CM)

Page 37: 9.1 Chapter 9 Using Telephone

9.37

Figure 9.18 Cable modem transmission system (CMTS)