High performance post, mail & shipping scale

designed for demanding shipping environments.

Technical Specifi cation

ZP900 DIGITAL

POST, MAIL & SHIPPING SCALE

DESCRIPTION The ZP900 is a highly accurate digital post, mailing and shipping scale. This high speed, high performance shipping scale will display and transmit data and integrate with back offi ce to POS systems. It provides the fl exibility needed to manage vital weight data within your operation.

Features the very latest Quartzell™ technology to guarantee speed and accuracy. Communicates via RS232, or optional USB-HID and Ethernet, allowing easy integration into existing third party software systems used around the world.

SPECIFICATIONS

GENERAL

Connectivity 2 x RS232 Bi-directional

Optional2 x USB HID (Mini USB )1 x Ethernet port (server only)

Display Options Up to 2 active displays: One weight indicator and one remote display. Options available are base mounted display, pole mounted display, pole mounted dual display and desk mount displays

Supported Protocols SMA, NCI, ECR and D901

Operating Systems USB HID supports OPOS & UPOS on Microsoft operating systems with Windows XP, Windows 7 and Windows 8. Serial RS232 communication also available

Unit of Measure 1 unit of measure is standard in lb or kg. A 2nd unit of measure in lb, kg, grams, oz or lb-oz can be enabled

Capacity Selections Two main base capacities available, 70 lb (35 kg) and 150 lb (80 kg) both using single or multi-range operation. Confi gurable up to 3 ranges with resolution up to 10,000 divisions per range

1

designed for demanding

SHIPPING SCALE

ZP900 POST & SHIPPING SCALE Technical Specifi cation

2

GENERAL

Incremental Selections Multiples of 1, 2 or 5 with division size starting at 0.001

Metrology Selections Capacity, Division Size, Units of Measure, Motion, Auto Zero Tracking (AZT), Filtering, Initial and Operating Zero Range, Over/Under Capacity Ranges, Multi-Range/Interval Operation and Normal Scale/Weight Classifi er Rounding

Time and Date Battery back up time/day/year (12 hour or 24 hour format)

Calibration Two to fi ve points stored calibration with Gravity Compensation and Initial Start-Up Gravity adjustment prompting

All metrology data stored directly in the base

Digital Filtering Harmonizer fi ltering available for unstable installations

Self Diagnostics Display, keys, serial ports, digital scale readings (crystal counts and compression and tension frequencies)

USER INTERFACE

Keypad ZERO, F1 and four navigation keys

Status Annunciators Zero, Motion, Gross, Battery Status, Weight Range 1/2/3, lb, kg, alternate unit of measure, optional Ethernet activity

Display IBN illuminated, 0.5” (13 mm) high 7 segment 7-digit, green on black background for high contrast and wide angle viewing

Displayed Resolution Agency approved up to 10,000 divisions per range with up to 3 range settings

Display Rate Selectable 1, 2, 5, or 10 times per second

Desk-mount displaysOperator and CustomerDesk-mount displaysOperator and Customer

Base-mount Operator Display

PHYSICAL /ENVIRONMENTAL

Base Enclosure Robust aluminum die cast housing fi tted with lipped stainless steel weight platter that is securely fi xed to the base. The base is also fi tted with four adjustable anti-slip feet standard

Display Enclosures ABS plastic

Load Cell Technology High accuracy digital Quartzell

Operating Temperature 41° F to 104° F / +5° C to 40° C (Approvals) at 10 to 90% humidity-4° F to 140° F / -20° C to 60° C (industrial) at 10 to 90% humidity

Return to Zero Speed Stable Zero using up to 10% capacity 1.20 seconds ; 10% to full capacity 1.40 seconds

Humidity 10% to 90% relative, non-condensing

Base Construction Clam shell base design with a centrally positioned suspended digital Quartzell cell

Overload Protection Up to 1100% overload protection based off the 80 kg base structure via our patented spring protection system

Corner Loading 100%

IP Protection Designed to meet IP31

Pole-mount displayssingle or double-sided

3

BASE CAPACITY/RESOLUTION

Base Size Imperial Capacity and Resolution Available Metric Capacity and Resolutions Available

9” x 12” (230 mm x 305 mm) Max1/d1 Max2/d2 Max3/d3 Max1/d1 Max2/d2 Max3/d3

70 lb / 35 kg base 10 kg x 1 g

20 kg x 2 g

70 lb x 0.01 lb 30 kg x 5 g

0-10 lb / 0.002 lb 0-70 lb / 0.01 lb 35 kg x 5 g

0-10 lb / 0.002 lb 0-30 lb / 0.005 lb 0-70 lb / 0.01 lb 0-5 kg / 0.001 kg 0-30 kg / 0.005 kg

0-6 kg / 0.001 kg 0-30 kg / 0.005 kg

0-6 kg / 0.001 kg 0-20 kg / 0.002 kg 0-30 kg / 0.005 kg

70 lb x 0.2 oz 0-6 kg / 0.001 kg 0-20 kg / 0.002 kg 0-35 kg / 0.005 kg

0-10 lb x 0.05 oz 0-70 lb / 0.2 oz 0-6 kg / 0.001 kg 0-35 kg / 0.005 kg

12” x 14” (305 mm x 350 mm) Max1/d1 Max2/d2 Max3/d3 Max1/d1 Max2/d2 Max3/d3

70 lb / 35 kg base 10 kg x 1 g

20 kg x 2 g

70 lb x 0.01 lb 30 kg x 5 g

0-10 lb / 0.002 lb 0-70 lb / 0.01 lb 35 kg x 5 g

0-10 lb / 0.002 lb 0-30 lb / 0.005 lb 0-70 lb / 0.01 lb 0-5 kg / 0.001 kg 0-30 kg / 0.005 kg

0-6 kg / 0.001 kg 0-30 kg / 0.005 kg

0-6 kg / 0.001 kg 0-20 kg / 0.002 kg 0-30 kg / 0.005 kg

0-6 kg / 0.001 kg 0-20 kg / 0.002 kg 0-35 kg / 0.005 kg

70 lb x 0.2 oz 0-6 kg / 0.001 kg 0-35 kg / 0.005 kg

0-10 lb / 0.05 oz 0-70 lb / 0.2 oz

12” x 14” (305 mm x 350 mm) Max1/d1 Max2/d2 Max3/d3 Max1/d1 Max2/d2 Max3/d3

150 lb / 80 kg base 100 lb x 0.01 lb 50 kg x 5 g

150 lb x 0.02 lb 80 kg x 10 g

0-10 lb / 0.005 lb 0-100 lb /0 .01 lb 0-5 kg / 0.002 kg 0-50 kg / 0.005 kg

0-10 lb / 0.005 lb 0-150 lb / 0.02 lb 0-5 kg / 0.002 kg 0-75 kg / 0.010 kg

0-10 lb / 0.005 lb 0-100 lb / 0.01 lb 0-150 lb / 0.02 lb 0-20 kg /0.002 kg 0-50 kg / 0.005 kg 0-80 kg / 0.01 kg

0-10 lb / 0.1 oz 0-100 lb / 0.2 oz 0-20 kg / 0.002 kg 0-80 kg / 0.01 kg

0-10 lb / 0.1 oz 0-150 lb / 0.5 oz

0-10 lb / 0.1 oz 0-150 lb / 0.5 oz 0-150 lb / 0.5 oz

100 lb x 0.2 oz

150 lb x 0.5 oz

ELECTRICAL

Circuitry Protection RFI, EMI and ESD protection

OPTIONS

Ball Top Option Designed to fit on the 12” x 14” (305 mm x 355 mm) base, this 10 ball stainless steel ball top makes it ideal to roll heavy boxes on and off the scale

Carry Handles Optional carry handles can be retro fitted to allow the scale base to be easily carried around

Counter Lock Down Plate Bolt down plate to stop the scale base from being moved from the counter

USB Option 2 USB ports to communicate to 2 PCs

Ethernet Option 1 Ethernet port to communicate to 1 PC

Internal Battery Option Battery pack mounted on the rear of the base with internal recharger. 20 hours operation betweencharges (charge time 4 hours)

ZP900 POST & SHIPPING SCALE Technical Specifi cation

4

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501485

OUTLINE DRAWING, 12 x 14BASE w/ ZP900-PB1

.03

.0101 DEG.

Greg Abel

Cory Hainy

20-Apr-15

27-May-15

PN AWT35-501485

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODUCTION RELEASE. ECO-513945 GSA 27 MAY 2015 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

5.86 [149mm] MAX5.37 [136mm] MIN

14.49 [368 mm]

13.74 [349 mm]

2.93 [75 mm] 7.87 [200 mm]

13.50 [343 mm]

14.50 [368 mm]

10.00 [254 mm]

12.00 [305 mm]

12.51 [318 mm] .82 [21 mm]1.16 [30 mm]

1.29 [33mm] MAX.80 [14mm] MIN1.61 [41 mm]FOOT

11.50 [292 mm]

3.08 [78 mm] 4.93 [125 mm]

Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool Works”). Copyright © 2015 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves the right to alter without notice the specifi cation, design, price or conditions of supply of any product or service at any time.

www.averyweigh-tronix.com

Avery Weigh-Tronix is an ITW company

zp900series_spec_UK_501423.indd V1 AWT35-501423

APPROVALS

Agencies*pending

10,000d NTEP up to 3 multi-range (Certifi cate No 15-028) 10,000 Canadian AM* approval multi-range 10,000d EC* /OIML* multi-range Measurement

Canada Approved

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501486

OUTLINE DRAWING,POLE MOUNT ASSY,ZP900-PH1, PRT, PP1

.03

.0101 DEG.

Greg Abel

Cory Hainy

21-Apr-15

27-May-15

PN AWT35-501485

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

BOTTOM VIEW WITHINDICATORS REMOVED

SHOWING MOUNTING HOLES

INDICATOR SHOWN

REMOTE DISPLAYSHOWN

BLANKSHOWN

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODUCTION RELEASE. ECO-513945 GSA 27 MAY 2015 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

17.38 [442 mm]

3.29 [84 mm]7.92 [201 mm]

4.72 [120 mm] 2.73 [69 mm]

12.83 [326 mm]

4.49 [114 mm]

.49 [12.5 mm]

2.91 [74.0 mm]

.27 [7 mm]3X

THRUACCEPTS 6mm OR1/4" SCREW FOR MOUNTING TO SURFACE

DATA CHARTMODEL # SIDE #1 SIDE #2

ZP900-PH1 INDICATOR REMOTEZP900-PR1 REMOTE BLANKZP900-PP1 INDICATOR BLANK

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501487

OUTLINE DRAWING,DESKTOP MOUNT ASSY,

ZP900-PD1, PT1

.03

.0101 DEG.

Greg Abel

Cory Hainy

21-Apr-15

28-May-15

PN AWT35-501487

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

BOTTOM VIEW

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODCUTION RELEASE. ECO-513945 GSA 27-Apr-15 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

9.28 [236 mm]

4.43 [113 mm]

3.77 [96 mm]

8.43 [214 mm]

DESKTOP SURFACE

4.46 [113 mm]

3.98 [101 mm]

.22 [5.5 mm]2X THRUACCEPTS 5mm OR #10SCREW FOR MOUNTINGTO SURFACE.

30°

NOTES:

1. ZP900-PD1 SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT, WITH THE ONLY DIFFERENCE BEING THE OVERLAY HAS NO KEYS.

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501485

OUTLINE DRAWING, 12 x 14BASE w/ ZP900-PB1

.03

.0101 DEG.

Greg Abel

Cory Hainy

20-Apr-15

27-May-15

PN AWT35-501485

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODUCTION RELEASE. ECO-513945 GSA 27 MAY 2015 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

5.86 [149mm] MAX5.37 [136mm] MIN

14.49 [368 mm]

13.74 [349 mm]

2.93 [75 mm] 7.87 [200 mm]

13.50 [343 mm]

14.50 [368 mm]

10.00 [254 mm]

12.00 [305 mm]

12.51 [318 mm] .82 [21 mm]1.16 [30 mm]

1.29 [33mm] MAX.80 [14mm] MIN1.61 [41 mm]FOOT

11.50 [292 mm]

3.08 [78 mm] 4.93 [125 mm]

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501487

OUTLINE DRAWING,DESKTOP MOUNT ASSY,

ZP900-PD1, PT1

.03

.0101 DEG.

Greg Abel

Cory Hainy

21-Apr-15

28-May-15

PN AWT35-501487

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

BOTTOM VIEW

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODCUTION RELEASE. ECO-513945 GSA 27-Apr-15 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

9.28 [236 mm]

4.43 [113 mm]

3.77 [96 mm]

8.43 [214 mm]

DESKTOP SURFACE

4.46 [113 mm]

3.98 [101 mm]

.22 [5.5 mm]2X THRUACCEPTS 5mm OR #10SCREW FOR MOUNTINGTO SURFACE.

30°

NOTES:

1. ZP900-PD1 SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT, WITH THE ONLY DIFFERENCE BEING THE OVERLAY HAS NO KEYS.

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501487

OUTLINE DRAWING,DESKTOP MOUNT ASSY,

ZP900-PD1, PT1

.03

.0101 DEG.

Greg Abel

Cory Hainy

21-Apr-15

28-May-15

PN AWT35-501487

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

BOTTOM VIEW

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODCUTION RELEASE. ECO-513945 GSA 27-Apr-15 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

9.28 [236 mm]

4.43 [113 mm]

3.77 [96 mm]

8.43 [214 mm]

DESKTOP SURFACE

4.46 [113 mm]

3.98 [101 mm]

.22 [5.5 mm]2X THRUACCEPTS 5mm OR #10SCREW FOR MOUNTINGTO SURFACE.

30°

NOTES:

1. ZP900-PD1 SHOWN. ZP900-PT1 DIMENSIONALLY EQUIVALENT, WITH THE ONLY DIFFERENCE BEING THE OVERLAY HAS NO KEYS.

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501485

OUTLINE DRAWING, 12 x 14BASE w/ ZP900-PB1

.03

.0101 DEG.

Greg Abel

Cory Hainy

20-Apr-15

27-May-15

PN AWT35-501485

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODUCTION RELEASE. ECO-513945 GSA 27 MAY 2015 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

5.86 [149mm] MAX5.37 [136mm] MIN

14.49 [368 mm]

13.74 [349 mm]

2.93 [75 mm] 7.87 [200 mm]

13.50 [343 mm]

14.50 [368 mm]

10.00 [254 mm]

12.00 [305 mm]

12.51 [318 mm] .82 [21 mm]1.16 [30 mm]

1.29 [33mm] MAX.80 [14mm] MIN1.61 [41 mm]FOOT

11.50 [292 mm]

3.08 [78 mm] 4.93 [125 mm]

12345678

A

B

C

D

A

B

C

D

12345678

SCALE SHEET

SIZE DWG. NO. ISSUE

FINISHMATERIAL

APPROVALS DATE

DRAWN

CHECK

MECH ENG

ELEC ENG

2 PLACE DECIMALS 3 PLACE DECIMALS ANGLES HOLE DIA TOLERANCES THREADS.000-.250 +.003/-.002.251-.500 +.005/-.003OVER .500 +.010/-.005

INT.CLASS

2B

EXT.CLASS

2A

©2015 ITW group of companies. All rights reserved. No part of this publication may be reproduced, stored in an electronic retrieval system,or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as permitted by law or under licence. Full acknowledgment of the source must be given. Avery Weigh-Tronix is a registered trade mark of the ITW group of companies. This publication was correct at the time of going to print however, Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.

THIRD ANGLE PROJECTION

1 OF 1 AAAWT35-501486

OUTLINE DRAWING,POLE MOUNT ASSY,ZP900-PH1, PRT, PP1

.03

.0101 DEG.

Greg Abel

Cory Hainy

21-Apr-15

27-May-15

PN AWT35-501485

NOT APPLICABLENOT APPLICABLE

D

UNLESS OTHERWISE SPECIFED, ALLDIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DO NOT SCALE DRAWING

REMOVE BURRS & SHARP EDGES Avery Weigh-Tronix, LLC1000 Armstrong Drive, Fairmont, MN 56031, USA

BOTTOM VIEW WITHINDICATORS REMOVED

SHOWING MOUNTING HOLES

INDICATOR SHOWN

REMOTE DISPLAYSHOWN

BLANKSHOWN

DRAWING ISSUE RECORDZONE ISSUE DESCRIPTION BY DATE APPR

AA PRODUCTION RELEASE. ECO-513945 GSA 27 MAY 2015 CCHAA

INDICATES LOCATION OF CHANGES FOR THAT REVISION

17.38 [442 mm]

3.29 [84 mm]7.92 [201 mm]

4.72 [120 mm] 2.73 [69 mm]

12.83 [326 mm]

4.49 [114 mm]

.49 [12.5 mm]

2.91 [74.0 mm]

.27 [7 mm]3X

THRUACCEPTS 6mm OR1/4" SCREW FOR MOUNTING TO SURFACE

DATA CHARTMODEL # SIDE #1 SIDE #2

ZP900-PH1 INDICATOR REMOTEZP900-PR1 REMOTE BLANKZP900-PP1 INDICATOR BLANK

DIMENSIONS (inches)

Base Size a b c d e f g h i j

9” x 12” 13.00 12.00 9.00 9.50 5.75 5.27 2.18 2.33 11.50 10.00 7.00

12” x 14” 14.50 13.50 12.00 12.50 5.86 5.37 2.93 3.08 14.50 11.50 10.00

DIMENSIONS (millimeters)

Base Size a b c d e f g h i j

230 mm x 305 mm 330 305 228 241 146 134 55 59 292 254 178

305 mm x 350 mm 368 343 305 318 149 136 75 78 368 292 254

a

b

j

d

c

i

e

f

g

h

7.92 [201 mm]

17.38 [442 mm]

12.83 [326 mm]

4.72 [120 mm]

3.29 [84 mm]

4.49 [114 mm]

2.73 [69 mm]

3.98 [101 mm]

30°

4.46 [113 mm]

3.77 [96 mm]

9.28 [236 mm]

4.43 [113 mm]

4.93 [125 mm]

7.87 [200 mm]

13.74 [349 mm]

FOOT 1.61 [41 mm]

1.16 [30 mm] .82 [21 mm]

1.29 [33 mm] MAX.80 [14 mm] MIN

DESKTOP SURFACE

INDICTORSHOWN

Max Min

Max Min