8 April 2004 1

DoorsTM

Set System Options

8 April 2004 2

Set System Options

• Allows you to set certain standard Doors operating parameters and enable certain Doors features

8 April 2004 3

Opening the Setup > System Window

• Open the Setup > System Window by either:

– Tool bar button

– Pull-down menu option

8 April 2004 4

Selecting the System Options Tab

• Click on the System Options Tab

8 April 2004 5

System Options

• There are 12 system options from which to choose

8 April 2004 6

Saving an Option Change

• Whenever any option change is made it must be saved or it is lost when the option window is closed– A pop-up window appears when an option’s status is

changed– Click the Save Now button to save the change

8 April 2004 7

Sites Mode

• Sites Mode allows you to manage multiple sites at the same time– Up to 255 max

• Sites Mode operation is described in detail in its own training module

8 April 2004 8

Enable Sites Mode

• Click the Sites ON check box to Enable Sites Mode• A new Sites tab is added to the window once enabled

8 April 2004 9

Badging

• Badging is a fee-based feature that allows you to manage photo ID badges

• Badging is described in detail in its own training module

8 April 2004 10

Enable Badging

• Click the Badging ON check box to Enable Badging • For proper operation you must call Keri Inside Sales

with your Badging PC ID to receive a License Code

8 April 2004 11

Entraguard Telephone Entry

• Entraguard allows you to manage Keri telephone entry controllers and user ID numbers

• Telephone Entry is described in detail in its own training module

8 April 2004 12

Enable Entraguard

• Click the EntraGuard ON check box to enable telephone entry

8 April 2004 13

Network Master Parameters

• Network master parameters are applied to all controllers on the access control network

8 April 2004 14

Daylight Savings Time Adjustment

• Allows automatic Daylight Savings Time adjustments at controllers (per U.S. standards only)

1st Sunday in April Last Sunday in October

8 April 2004 15

Enable Daylight Savings Time Adjustments

• Click the Daylight Savings check box to allow automatic Daylight Savings Time adjustment (this is the default value)

8 April 2004 16

Enable Global Unlock Input

• Click the Global Unlock check box to allow all doors to be unlocked by activating a specific input on the master controller

8 April 2004 17

Enable Global Secure Time

• Enter a Global Secure time, a specific time at which all doors manually unlocked doors will automatically be locked

8 April 2004 18

Local Anti-passback

• Anti-passback prevents someone from accessing a secure door and then passing his/her card back to someone else to use

• This is done by implementing rules on how often cards can be presented to readers

• Telephone Entry is described in detail in its own training module

8 April 2004 19

Enable Local Anti-passback

• Click the APB ON check box to enable anti-passback

8 April 2004 20

Door Type

• Allows doors to be designated as either Elevator doors or Gates– Changes the icon for these doors displayed in the Doors program

– Makes cardholder tracking and report reading easier by adding elevator or gate designators when identifying these doors in reports

• Enabling door type allows the feature to be used, but the actual door type assignment occurs in the Setup > Doors menu screen

8 April 2004 21

Door Type Icons

• Elevator doors

• Gates

• Telephone Entry (automatically detected)

• Time and Attendance

8 April 2004 22

Enable Door Type

• Click the Elevator ON check box to enable the elevator type• Click the Gate ON check box to enable the gate type• Click the Time and Attendance Terminal ON check box to

enable the Time and Attendance type

8 April 2004 23

User Data File Export/Import

• Export/Import is a fee-based feature that allows you to export and import the user data file

• Export/Import must be used with caution - Improper file handling can corrupt the user database

• Export/Import is described in detail in its own training module

8 April 2004 24

Enable User Data File Export/Import

• Click the Export/Import ON check box to Enable Export/Import

• For proper operation you must call Keri Inside Sales with your Export/Import PC ID to receive a License Code

8 April 2004 25

Rollcall/Tracking

• Enables features for locating users in secured areas– Rollcall identifies who has entered secured areas– Track identifies the path taken by a specific person

8 April 2004 26

Enable Rollcall/Tracking

• Click the Rollcall/Track ON check box to enable the export/import feature

8 April 2004 27

Card+PIN (P-650)

• Enables the P-650 Pyramid Associates Reader and Keypad Card+PIN feature, allowing access by card presentation and PIN entry

8 April 2004 28

Enable Card+PIN (P-650)

• Click the Card+PIN (P-650) ON check box to enable the Card+PIN feature

8 April 2004 29

Card+PIN (P-650) Limitations

• The Card+PIN (P-650) feature has certain limitations that you must acknowledge by clicking on the OK button before Card+PIN (P-650) becomes active

8 April 2004 30

Alarm Control

• Alarm Control enables access control system integration with NetworX NX-8E alarm panels

• Alarm Control is described in detail in its own training module

8 April 2004 31

Enable Alarm Control

• Click the Alarm Control ON check box to enable Alarm Control

8 April 2004 32

Temp Cards

• The Temp Cards feature allows you to assign cards that are active and valid for finite periods of time (days, weeks, months) and then automatically expire

• Temp Cards is described in detail in its own training module

8 April 2004 33

Enable Temp Cards

• Click the Temp Cards ON check box to enable the Temp Cards feature

8 April 2004 34

Temp Cards Warning

• The Temp Cards feature reduces the total number of cardholders the system can have – you must acknowledge by clicking on the OK button before Temp Cards becomes active

8 April 2004 35

Dual Verification

• The Dual Verification feature allows you to require one or more credentials to enter a secure area

• Dual Verification is described in detail in its own training module

8 April 2004 36

Enable Dual Verification

• Click the Dual Verification ON check box to enable the Dual Verification feature

8 April 2004 37

Dual Verification Warning

• Certain minimum requirements must be met in order for the Dual Verification feature to function properly. A warning appears with an alert to the requirements – you must acknowledge this by clicking on the Save Now button before Dual Verification becomes active

8 April 2004 38

Excessive PIN Attempts

• Allows a user 6 attempts to correctly present the credentials required for entry before being locked out for a specified amount of time

• Excessive PIN Attempts is described in detail in the Dual Verification training module

8 April 2004 39

Enable Excessive PIN Attempts

• Click the Excessive PIN Attempts ON check box to enable the Excessive PIN Attempts feature

• Enter the Lock Out Time (in seconds) the reader should be locked out following 6 failed attempts to enter correct credentials