8 7 6 5 4 3 2 1 - Kohler Co.resources.kohler.com/power/kohler/industrial/pdf/adv7644.pdf · metric...
4
A 1 2 3 4 5 6 7 8 B C D 1 2 3 4 5 6 7 8 A B C D TITLE SCALE DWG NO. CAD NO. SHEET DRAWN CHECKED APPROVED MAX. THIRD ANGLE PROJECTION POWER SYSTEMS, KOHLER, WI 53044 U .S.A. THIS DRAWING IN DESIGN AND DETAIL IS KOHLER CO. PROPERTY AND MUST NOT BE USED EXCEPT IN CONNECTION WITH KOHLER CO. WORK. ALL RIGHTS OF DESIGN OR INVENTION ARE RESERVED. 1521 59.9 [ ] 4094 161.2 [ ] 260.0 10.24 [ ] 1194 47.0 [ ] 1300 51.2 [ ] 53 2.1 [ ] 100 3.9 [ ] 800 31.5 [ ] 559 22.0 [ ] 78 3.1 [ ] 648 25.5 [ ] 559 22.0 [ ] 523 20.6 [ ] 473 18.6 [ ] 761 30.0 [ ] 1339 52.7 [ ] 1893 74.5 [ ] 2472 97.3 [ ] 469 18.5 [ ] DOOR CLEARANCE TYP 893 35.2 [ ] 1762 69.4 [ ] 4123 162.3 [ ] ENGINE EXHAUST 152.4 6.00 [ ] PRO-E METRIC DIMENSION PRINT 230-300KW JD 0.06 1 of 4 ADV-7644 D UNLESS OTHERWISE SPECIFIED - 1) DIMENSIONS ARE IN MILLIMETERS 2) TOLERANCES ARE: X.XX # 0.25 X.X # 1.0 X # 1.5 SURFACE FINISH ANGLES # 0 $ 30' APPROVALS DATE DJV 10-24-08 CWF 10-24-08 SLJ 10-24-08 REV DATE ON COMPOSITE DWGS, SEE PART NO. FOR REVISION LEVEL BY E 10-31-12 SHEET 2 WAS SHEET1, ADDED SHEET 1 [CT28612] CEK F 2-5-13 (A-1) 1-4 WAS 1-2, SEE SHEET 3 AND 4 [CT32174] SAM G 8-4-17 (D-6) DIM. n 152.4 (6.00) ADDED [CT177004] SRM 230-300 MODEL JOHN DEERE TIER III NOTE: 1. IF STANDARD TANK IS ORDERED, ENCLOSURE MOUNTS DIRECTLY TO TANK 2. IF STATE TANK IS ORDERED, TANK MOUNTS BELOW SKID 3. TANK MAY EXTEND BEYOND ENCLOSURE (DISCHARGE END ONLY) 4. FOR STUB-UP ACCESS DURING INSTALLATION THE REAR ENCLOSURE PANEL SHOULD BE REMOVED. OIL/COOLANT DRAIN (BOTH SIDES) AIR INTAKE AIR INTAKE AIR DISCHARGE MODEL ENCLOSURE WEIGHT KG [LBS] STEEL WEATHER 363 [800] STEEL SOUND 386 [850] ALUMINIUM SOUND 238 [525]
Transcript of 8 7 6 5 4 3 2 1 - Kohler Co.resources.kohler.com/power/kohler/industrial/pdf/adv7644.pdf · metric...
A
12345678
B
C
D
12345678
A
B
C
D
TITLE
SCALE
DWG NO.
CAD NO. SHEET
DRAWN
CHECKED
APPROVED
MAX.
THIRD ANGLEPROJECTION
POWER SYSTEMS, KOHLER, WI 53044 U .S.A.
THIS DRAWING IN DESIGN AND DETAIL IS KOHLER CO.PROPERTY AND MUST NOT BE USED EXCEPT INCONNECTION WITH KOHLER CO. WORK. ALL RIGHTS OFDESIGN OR INVENTION ARE RESERVED.
1521 59.9[ ]
4094 161.2[ ]
260.0
10.24
[]
119447.0[ ]
130051.2[ ]
532.1[ ] 100
3.9[ ]80031.5[ ]
55922.0[ ]
783.1[ ]
64825.5[ ]
55922.0[ ]
52320.6[ ]
473 18.6
[]
761 30.0[ ]
1339 52.7[ ]
1893
74.5
[]
2472 97.3[ ]469 18.5[ ]
DOOR CLEARANCE
TYP
893
35.2
[]
1762
69.4
[]
4123 162.3[ ]
ENGINE EXHAUST152.4 6.00[ ]
PRO-EMETRIC
DIMENSION PRINT 230-300KW JD0.06 1 of 4
ADV-7644 D
UNLESS OTHERWISE SPECIFIED -1) DIMENSIONS ARE IN MILLIMETERS2) TOLERANCES ARE:
X.XX �#� 0.25X.X �#� 1.0X �#� 1.5 SURFACE FINISHANGLES �#� 0�$� 30'
APPROVALS DATE
DJV
10-24-08
CWF 10-24-08
SLJ 10-24-08
REV DATE ON COMPOSITE DWGS, SEE PART NO. FOR REVISION LEVEL BY
E 10-31-12 SHEET 2 WAS SHEET1, ADDED SHEET 1 [CT28612] CEK
F 2-5-13 (A-1) 1-4 WAS 1-2, SEE SHEET 3 AND 4 [CT32174] SAM
G 8-4-17 (D-6) DIM. �n�152.4 (6.00) ADDED [CT177004] SRM
230-300 MODELJOHN DEERE TIER III
NOTE: 1. IF STANDARD TANK IS ORDERED, ENCLOSURE MOUNTS DIRECTLY TO TANK 2. IF STATE TANK IS ORDERED, TANK MOUNTS BELOW SKID 3. TANK MAY EXTEND BEYOND ENCLOSURE (DISCHARGE END ONLY) 4. FOR STUB-UP ACCESS DURING INSTALLATION THE REAR ENCLOSURE PANEL SHOULD BE REMOVED.
OIL/COOLANT DRAIN(BOTH SIDES)
AIR INTAKE
AIR INTAKE
AIR DISCHARGE
MODELENCLOSURE WEIGHT
KG [LBS]
STEEL WEATHER 363 [800]
STEEL SOUND 386 [850]
ALUMINIUM SOUND 238 [525]
A
12345678
B
C
D
12345678
A
B
C
D
TITLE
SCALE
DWG NO.
CAD NO. SHEET
DRAWN
CHECKED
APPROVED
MAX.
THIRD ANGLEPROJECTION
POWER SYSTEMS, KOHLER, WI 53044 U .S.A.
THIS DRAWING IN DESIGN AND DETAIL IS KOHLER CO.PROPERTY AND MUST NOT BE USED EXCEPT INCONNECTION WITH KOHLER CO. WORK. ALL RIGHTS OFDESIGN OR INVENTION ARE RESERVED.
B 10-7-10 (D-6) 523 WAS 588, (C-6) 761 WAS 713, (B-2)4121.4 WAS 4100.0 [90099-5] RJS
SAM
(A-1) 2-4 WAS 2-2, SEE SHEET 3 AND 4 [CT32174]
783.1[ ]
64825.5[ ]1194 47.0[ ]
1300 51.2[ ]1965.0 [77.36]
260.0
10.24
[]
1521.0 59.88[ ]
4094.0 161.18[ ]
53 2.1[ ] 100 3.9[ ]
800 31.5[ ]
55922.0[ ]
55922.0[ ]
DOOR CLEARANCE
TYP
912
35.9
[]
52320.6[ ]
473
18.6
[]
761 30.0[ ]
1338 52.7[ ]
1883
74.1
[]
4121 162.3[ ]
1759
69.2
[]
DOOR OPENING859 33.8[ ]
1061 [41.8]
DOOR OPENING
ENGINE EXHAUST152.4 6.00[ ]
PRO-EMETRIC
DIMENSION PRINT 230-300KW JD0.06 2 of 4
ADV-7644 D
UNLESS OTHERWISE SPECIFIED -1) DIMENSIONS ARE IN MILLIMETERS2) TOLERANCES ARE:
X.XX �#� 0.25X.X �#� 1.0X �#� 1.5 SURFACE FINISHANGLES �#� 0�$� 30'
APPROVALS DATE
DJV
10-24-08
CWF 10-24-08
SLJ 10-24-08
REV DATE ON COMPOSITE DWGS, SEE PART NO. FOR REVISION LEVEL BY
C 3-16-11 (A-8) 260.0 WAS 200.0 [91189] SAM
D 6-20-11 (C-3) STUB-UP NOTE ADDED [91752]
E 10-31-12 SHEET2 WAS SHEET 1, ADDED SHEET 1 [CT28612] CEK
F 2-5-13 SAM
G 8-4-17 (C-5) DIM. �n�152.4 (6.00) ADDED; SEE SHEET 1
[CT177004] SRM
230-300 MODELJOHN DEERE TIER III
IBC/ OSHPD
NOTE: 1. IF STANDARD TANK IS ORDERED, ENCLOSURE MOUNTS DIRECTLY TO TANK 2. IF STATE TANK IS ORDERED, TANK MOUNTS BELOW SKID 3. TANK MAY EXTEND BEYOND ENCLOSURE (DISCHARGE END ONLY) 4. FOR STUB-UP ACCESS DURING INSTALLATION THE REAR ENCLOSURE PANEL SHOULD BE REMOVED.
DIMENSIONS IN [] ARE IN ENGLISH EQUIVALENTS.
AIR DISCHARGE
OIL/COOLANT DRAIN(BOTH SIDES
AIR INTAKEAIR INTAKE
12X �n�25.4 [1.00]
MODELENCLOSURE WEIGHT
KG [LBS]
STEEL WEATHER 363 [800]
STEEL SOUND 386 [850]
ALUMINIUM SOUND 238 [525]
A
12345678
B
C
D
12345678
A
B
C
D
TITLE
SCALE
DWG NO.
CAD NO. SHEET
DRAWN
CHECKED
APPROVED
MAX.
THIRD ANGLEPROJECTION
POWER SYSTEMS, KOHLER, WI 53044 U .S.A.
THIS DRAWING IN DESIGN AND DETAIL IS KOHLER CO.PROPERTY AND MUST NOT BE USED EXCEPT INCONNECTION WITH KOHLER CO. WORK. ALL RIGHTS OFDESIGN OR INVENTION ARE RESERVED.
KEM
230-300 MODELJOHN DEERE TIER III
NOTE: 1. IF STANDARD TANK IS ORDERED, ENCLOSURE MOUNTS DIRECTLY TO TANK 2. IF STATE TANK IS ORDERED, TANK MOUNTS BELOW SKID 3. TANK MAY EXTEND BEYOND ENCLOSURE (DISCHARGE END ONLY) 4. FOR STUB-UP ACCESS DURING INSTALLATION THE REAR ENCLOSURE PANEL SHOULD BE REMOVED.
OIL/COOLANT DRAIN(BOTH SIDES)
AIR INTAKE
AIR INTAKE
AIR DISCHARGE 761 30.0[ ]
1339 52.7[ ]
260
10.2
[]
53 2.1[ ]
1194 47.0[ ]
1300 51.2[ ]
78 3.1[ ]648 25.5[ ]
55922.0[ ]100 3.9[ ]
80031.5[ ]
55922.0[ ]
4094 161.2[ ]
1521 59.9[ ]
469 18.5[ ] 2472 97.3[ ]
DOOR OPENING859 33.8[ ]
DOOR OPENING
1062
41.8
[]
473.04
18.624
[]
1811 71.3[ ]
1432
56.4
[]
PLENUM PASS THROUGH
1798
70.8
[]
PLENUM779 30.7[ ]
40.1
[]
50.2
[]
112 4.4[ ]
41
1.6
[]
100 3.9[ ]
103 4.1[ ]
DOOR CLEARANCE
TYP
891
35.1
[]
4123 162.3[ ]
1755
69.1
[]
PRO-EMETRIC
DIMENSION PRINT 230-300KW JD
0.06 3 of 4
ADV-7644 D
UNLESS OTHERWISE SPECIFIED -1) DIMENSIONS ARE IN MILLIMETERS2) TOLERANCES ARE:
X.XX �#� 0.25X.X �#� 1.0X �#� 1.5 SURFACE FINISHANGLES �#� 0�$� 30'
APPROVALS DATE
SAM 2-5-13
KEM 2-5-13
2-5-13
REV DATE ON COMPOSITE DWGS, SEE PART NO. FOR REVISION LEVEL BY
F 2-5-13 SHEET 3 AND CA AQMD MODEL ADDED, SEE SHEET 4 [CT32174]
DJV
G 8-4-17 SEE SHEET 1 & 2 [CT177004] SRM
CA AQMD READY ENCLOSURES(NO SILENCER)
EXHAUST OUTLETSCALE 0.400
MODELENCLOSURE WEIGHT
KG [LBS]
STEEL WEATHER 302 [665]
STEEL SOUND 325 [715]
ALUMINIUM SOUND 177 [390]
A
12345678
B
C
D
12345678
A
B
C
D
TITLE
SCALE
DWG NO.
CAD NO. SHEET
DRAWN
CHECKED
APPROVED
MAX.
THIRD ANGLEPROJECTION
POWER SYSTEMS, KOHLER, WI 53044 U .S.A.
THIS DRAWING IN DESIGN AND DETAIL IS KOHLER CO.PROPERTY AND MUST NOT BE USED EXCEPT INCONNECTION WITH KOHLER CO. WORK. ALL RIGHTS OFDESIGN OR INVENTION ARE RESERVED.
KEM
SHEET 4 AND CA AQMD MODEL ADDED, SEE SHEET 3 [CT32174]
230-300 MODELJOHN DEERE TIER III
IBC/ OSHPD
NOTE: 1. IF STANDARD TANK IS ORDERED, ENCLOSURE MOUNTS DIRECTLY TO TANK 2. IF STATE TANK IS ORDERED, TANK MOUNTS BELOW SKID 3. TANK MAY EXTEND BEYOND ENCLOSURE (DISCHARGE END ONLY) 4. FOR STUB-UP ACCESS DURING INSTALLATION THE REAR ENCLOSURE PANEL SHOULD BE REMOVED.
DIMENSIONS IN [] ARE IN ENGLISH EQUIVALENTS.
AIR DISCHARGE
OIL/COOLANT DRAIN(BOTH SIDES
AIR INTAKEAIR INTAKE
12X �n�25.4 [1.00]
DOOR CLEARANCE
TYP
912
35.9
[]
761 30.0[ ]
1521 59.9[ ]
2018 79.4[ ]
4094 161.2[ ]
53 2.1[ ]
1300 51.2[ ]
1194 47.0[ ]
100 3.9[ ]
80031.5[ ]
55922.0[ ]
55922.0[ ] 648 25.5[ ] 78 3.1[ ]
2019
79.5
[]
4121 162.3[ ]1338 52.7[ ]DOOR OPENING859 33.8[ ]
DOOR OPENING
1059
41.7
[]
1822 71.7[ ]
1432
56.4
[]
1811 71.3[ ]
PLENUM779 30.7[ ]
PLENUM PASS THROUGH
1802
70.9
[]
12
0.5
[]
112 4.4[ ]
50.2
[]
100 3.9[ ] 41
1.6
[]
103 4.1[ ]
PRO-EMETRIC
DIMENSION PRINT 230-300KW JD
0.06 4 of 4
ADV-7644 D
UNLESS OTHERWISE SPECIFIED -1) DIMENSIONS ARE IN MILLIMETERS2) TOLERANCES ARE:
X.XX �#� 0.25X.X �#� 1.0X �#� 1.5 SURFACE FINISHANGLES �#� 0�$� 30'
APPROVALS DATE
SAM 2-5-13
KEM 2-5-13
2-5-13
REV DATE ON COMPOSITE DWGS, SEE PART NO. FOR REVISION LEVEL BY
F 2-5-13
SAM
G 8-4-17 SEE SHEET 1 & 2 [CT177004] SRM
CA AQMD READY ENCLOSURES(NO SILENCER)
EXHAUST OUTLETSCALE 0.300
MODELENCLOSURE WEIGHT
KG [LBS]
STEEL WEATHER 302 [665]
STEEL SOUND 325 [715]
ALUMINIUM SOUND 177 [390]
