7477835 BW35 Post Install Steps
-
Upload
muratsadvakassov -
Category
Documents
-
view
229 -
download
0
Transcript of 7477835 BW35 Post Install Steps
-
8/8/2019 7477835 BW35 Post Install Steps
1/91
BW 3.5 System Basis Post-Install and initial configuration steps
The intention of this guide is to provide a general guideline usable on BW 2.x through 3.5 systems toset basic transactional and basis settings for standard performance. Many default system settings are
not optimal, or are not landscape specific for a customer. This list provides generic, grouped settings
for better over all performance, or a baseline for when certain activities will be used later in animplementation. (i.e. workflow or info broadcasting)
There are three supplemental documents referred to these are not needed but nice to do:How-To REALLY install BW 3x Statistics
Initiating Workflow/Webflow settings
Connecting a BW system to EP6.0
All recommendations are consolidated from appropriate SAP tuning notes and conference
presentations, as well as actual EarlyWatch and Go-Live check reports.
Pre-upgrade or copy functional steps
Before backing up a system for copy or upgrading it or applying a PI patch, to preserve dataintegrity, the following steps must be followed by the functional team:
RSA7 delta queues must be cleared run delta process chains
Send all data to final data targetActivate all ODS requests
Promote all requests to downstream data targets (data marts)
Roll up aggregatesRun hierarchy change run
Suspend all process chains and background jobs
Basis steps after this:
Run Temp Tablespace cleanup report SE38 SAP_DROP_TMPTABLESRebuild Indexes SE38 SAP_INFOCUBE_INDEXES_REPAIR
Fix InfoObject inconsistencies RSD1 repair InfoObjects
Disable RFCs (//dummy hostnames) prevents accidental data transfers
Validate proper logical systems and RFC connections to other source systems
Reconnection to source systemsRSA1-source test, restore or replicate connections, re-import global settings and exchange rates
Restart (activate/schedule) process chains
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
2/91
After the standard SAP install or upgrade:
Log on to client 000,
SPAD create LOCL printer, and set LP01 as dummy.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
3/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
4/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
5/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
6/91
Adjust users SAP* and DDIC:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
7/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
8/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
9/91
Copy user to the basis administrator:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
10/91
Assign printer LOCL:
and any other admins that may apply patches or resolve TMS issues.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
11/91
RZ10 utilities-import profiles of active servers
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
12/91
In SBIW Transfer Application Component Hierarchy
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
13/91
Initialize system Log in SM21:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
14/91
Run SICK
In SE38 RSCPINST
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
15/91
-
8/8/2019 7477835 BW35 Post Install Steps
16/91
Check SLICENSE and install a license.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
17/91
Perform Post-Install actions and STMS configuration in SE06
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
18/91
Run STMS
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
19/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
20/91
Verify Web server is running SMICM
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
21/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
22/91
Go to SICF and activate web services initially it looks like:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
23/91
After:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
24/91
Under BC activate BSP and any graphics, mime, printing or other services.
Get hardware key from SLICENSE and apply for permanent license:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
25/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
26/91
The new license takes effect on system restart.
Get and apply java license key too
Check, adjust and add work processes -
Apply kernel patch, SPAM, BASIS, ABA, BW35 and BICONT patches. SR1 starts you at SP9, BW
sp10 causes an upgrade to PI-Basis 2005.1
Use Saint to add ST-PI and ST-A/PI
Initialize SDCCN
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
27/91
To run the RTCCTOOL report youll need to configure OSS1 transaction/RFC.
You are now ready for the client copy:
SCC4 to create add all landscape logical systems in BD54 when asked
Log into new clientSCCL copy client using SAP_ALL and client 000 users
When complete, set system time in STZACRun SGEN for post-install and bsps
Set login client: RZ10
login/accept_sso2_ticket 1login/create_sso2_ticket 2
login/system_client 100
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
28/91
Set system time zone in STZAC to GMT or your local TZ or stay on Central European time
Then restart and initialize RSA1 the BW Admin workbench
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
29/91
Then run SGEN for BSPs and all objects
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
30/91
Set permitted characters in RSKC
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
31/91
Set up logon group PUBLIC in SMLG
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
32/91
-
8/8/2019 7477835 BW35 Post Install Steps
33/91
Assign to timetable:
Opmode-timetable. Select change
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
34/91
Double click on 00:00 shift double-click on 23:00 and assign to DEFAULT
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
35/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
36/91
-
8/8/2019 7477835 BW35 Post Install Steps
37/91
Instances/operation modes button create
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
38/91
Save and assign
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
39/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
40/91
Install Demo content and technical content:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
41/91
Set Master Data autoSID in RSCUSTV9
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
42/91
Create background user
SPRO
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
43/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
44/91
-
8/8/2019 7477835 BW35 Post Install Steps
45/91
Activate BEx personalization RS_PERS_ACTIVATE
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
46/91
Set default traffic light color when no data is available in source system (default is yellow)
(RSMONCOLOR)
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
47/91
Create a flatfile source system, SAP_DEMO (flatfile), and connect to the R3 client
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
48/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
49/91
Now that you have a connection, transfer exchange rates and global settings.
If you have more than one connection, transfer again from the master system, then update from all
others, then update again from the masterusually this is the primary R3/ECC system. These areclient independent, so only transfer per system, even if you have multiple client sources. This is a
one time activity some installations may bring currency exchange rate values over as master data.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
50/91
Do mapping of all logical system names, and suggest source system IDs RSA1-Tools-
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
51/91
Suggest and save
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
52/91
Then do mappingsthe target source systems change to all test or all production if in those
environments
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
53/91
In the transport connection, create a default BEx development bucket transport and set Object
Changeability settings as they would be in production (they no effect on development)
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
54/91
Typical sample each of these object sets are a business decision since it affects what power users
can and cannot do in the system.
Object Changeability:
AGGR Aggregate Changeable OriginalANMO Mining Model Everything Changeable
ANPR Analysis Process Everything Changeable
ANSO Model Source Not ChangeableAQQU InfoSet Query Not Changeable
BRSE Broadcast Setting Changeable Original
CRWB Crystal Report Changeable Original
CTRT Currency Translation Type Not ChangeableDEST Open Hub Destination Not Changeable
DMMO Data Mining Model Changeable Original
ELEM Query Element Everything Changeable
EVEN Event Processing Chain Changeable OriginalISIG InfoPackage Group Changeable Original
ISIP InfoPackage Everything ChangeableITEM Web Item Everything Changeable
QVIW Query View Everything Changeable
RAPA Reporting Agent Scheduling Pkg Changeable Original
RASE Reporting Agent Setting Changeable OriginalRRCA RRI InfoCube Receiver Not Changeable
RRQA RRI Query Receiver Not Changeable
RSPC Process Chain Everything ChangeableRSPT Process Chain Starter Changeable Original
RSPV Process Variants Changeable Original
SPOK InfoSpoke Not ChangeableTMPL Web Template Name Changeable Original
XLWB Workbook Changeable Original
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
55/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
56/91
Routine maintenance checks:
RSD1 Repair InfoObjects - check post-patch and after major transports or content activation.Execute repair until you see this green light
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
57/91
RSA7 delta queue basis team reviews for delta entries, functional team clears queues before PIpatch or upgrade by running delta loads.
SE38-SAP_INFOCUBE_INDEXES_REPAIR schedule weekly!
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
58/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
59/91
-
8/8/2019 7477835 BW35 Post Install Steps
60/91
DB13 set database checks Check DB consistency once per week (Sunday 10a) (CBO/Table
statistics update)
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
61/91
And start the normal basis jobs via SSAA:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
62/91
System connection parameters:SBIW-General-Data Load parameters (ROIDOCPRMS Table) set for all landscape LS
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
63/91
You may have to define new LS in BD54. Set new defaults to 20000kb, (lines-100,000 by default),
Info IDOC freq=10 15 or 20 per data packet, 3 (background) processes, no target system to run on(yet) and 3 max dialogparallel processing depends on available dialog and background processes
in the target system ideally at least 15 so 3 means you can run up to 5 extract jobs in parallel
there is a targets and PSA in parallel setting in InfoPackages that may also affect thisproper extractschedule planning prevents issues.
Final copy or transport this to all landscape systems
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
64/91
RSCUSTV6 (flatfile) defaults are bad. Set to 10, 20000 (20MB) and 1,000,000 for PSA partition
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
65/91
RSCUSTA2 (ODS/internal system activations and load settings)
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
66/91
RSCUSTV18 (DB Connect) 10000 is good for records, package size 20000 or 30000 is ok
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
67/91
RSRCACHE/RSCUSTV14 cache parameters show ST03, RSRT
Set cache parameters to cluster table for now
Set initial default menu SSM2 to RS00
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
68/91
Test SM65
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
69/91
Online Help SR13 set for SAP help online at help.sap.com always is current version!
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
70/91
OSS1 for SDCC
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
71/91
TREX SRMO and RSODADMIN
Install TREX per manual note the service name exactly it is case sensitive. If on the local server
use the instances gateway If not, install the SAP gateway service.
Create RFC in SM59 per guide
SRMO create SSR
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
72/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
73/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
74/91
RSODADMIN walk through this screen top to bottom to schedule the jobs and index current
content leave as below:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
75/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
76/91
IGS setup and test: IGS installs with the java stack
SM59 Edit generated RFCs for IGS delivered:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
77/91
Corrected for your IGS destination (as seen in IGS.XML file on server) fill in SID to program ID
and the abap stack gateway information:
Test RFC:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
78/91
Then test the IGS with SE38 BW_IGS_ADMIN, and BW_IGS_CHART_TEST
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
79/91
If you see this on chart test, it works!
HINT: you can access this directly on web via admin port, in this case 40080 as seen in igs.xml file
http://sapbidev:40080
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
http://sapbidev:40080/http://sapbidev:40080/ -
8/8/2019 7477835 BW35 Post Install Steps
80/91
This direct connection tells you the installed IGS version, which you dont get from within the
system. This is default NW2004 SR1 version:
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
81/91
BW STATS
See How-to REALLY Activate BW Statistics document activate Technical DataSources,contentthen RSA1-Tools BW Statistics for InfoProviders - select all, save without transport
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
82/91
Select trashcan from here and delete all old stats from RSDDSTAT tables to datetheres junk in
there. Schedule this job variant periodically later.
- hit trashcan to delete
This runs a step RSDDK_STA_DEL_DATA
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
83/91
Activate and assign Administrators to the SAP_BW_TCONT role for workbook access in PFCG or
SU01 then select this menu with the other menu button as below, and save workbook to favorites.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
84/91
Set default web protocol RSCUSTV15
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
85/91
RSCUSTV21 default templates if different from delivered 0ADHOC and 0ANALYZER (nothing
to set now)
RSCUSTV11 set branded default BEx style sheet (later)
Integrate with portal EP60 from SPROsee Connecting a BW system to EP6.0 guide.
Settings are in RSPOR_SETUP report. This screen is from SPRO - IMG
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
86/91
-
8/8/2019 7477835 BW35 Post Install Steps
87/91
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
88/91
Email SCOT / SMTP
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
89/91
Turn stuff on and connect to send internet mail by editing SMTP node
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
90/91
Assuming you have installed the BI pre-calculation service, you can run the RSPRECADMIN tool
to configure it from a GUI on the box you installed the service:
Create service shows this box to fill in:
Maintenance SE38 Report RSRD_BOOKMARK_REORGANIZATION
The BI precalc service requires that you have MS Excel installed on the server or PC running it.
2500 City West Blvd., Suite 800, Houston, Texas 77042 Phone: 713.980.7600 Fax: 713.706.4014 www.myITgroup.com
-
8/8/2019 7477835 BW35 Post Install Steps
91/91
The last step is to fine tune your instance profiles and database parameters per SAP performancenotesstarting with those recommended in the Installation or upgrade manual. This is a list I used
mid-2005 for BW 3.5:
NOTES: R3 425207, 103747 (v57 11/30/05), 88416 (v14 6/7/04), 404546 (Performance), 101717
(Process Restart) == BW 184905 (Collective) 192658 (Basis parameters for BW v30 1/20/06) Table
Buffers 480710 (v13 12/27/05) resource mgmt trfc 74141 (v65 11/4/05)
Here is an partial example of a tuned instance profile (BW31/Oracle9203/unix so it is OLD and
INCOMPLETE dont use it!):
#.*************************************************************************#.* *#.* Instance profile BW0_DVEBMGS01_SAPBW0CI *#.* *#.* Version = 000001 *#.* Optimized by user = D.Samuels x28061 *#.* Generated on = 03/11/2004 *#.* *#.* Notes:103747,192658,414220,480710,74141, 146289 and 101717 *#.* BW0 has 4 CPU, 32GB RAM and 40 processes *#.* *#.*************************************************************************
abap/buffersize = 400000abap/heap_area_dia = 2000000000abap/heap_area_nondia = 2000000000abap/heap_area_total = 2000000000abap/heaplimit = 20000000abap/swap_reserve = 20971520abap/timeout = 900abap/use_paging = 0auth/auth_number_in_userbuffer = 9000
DIR_DATA = /usr/sap/BW0/DVEBMGS01/dataDIR_PAGING = /usr/sap/BW0/DVEBMGS01/dataDIR_REORG = /usr/sap/BW0/DVEBMGS01/dataDIR_ROLL = /usr/sap/BW0/DVEBMGS01/dataDIR_SORTTMP = /usr/sap/BW0/DVEBMGS01/dataDIR_TEMP = /tmpDIR_TRANS = /usr/sap/transdbs/ora/array_buf_size = 1000000em/blocksize_KB = 4096em/global_area_MB = 255em/initial_size_MB = 8192em/stat_log_size_MB = 20em/stat_log_timeout = 600
/ bl i 16384