7 steps to fix a leaky pipe temporarily

5
Steps to Fix a Leaky Pipe Temporarily

Transcript of 7 steps to fix a leaky pipe temporarily

Steps to Fix a Leaky Pipe Temporarily

As anything else, pipes can crack and stop working properly with time and usage.

Start by dealing with the waterYou can place a bucket or container under the leak to keep the water from going everywhere. Then, you can clean up the mess that was created.

How to Do a Temporary Fix on a Leaky Pipe

The next step is to closely inspect the pipeIf you want to repair the problem effectively, you’ll need to pinpoint the exact place in the pipe from which the water is spilling out.

To continue with your repair effortsYou’ll need to close off the water supply for that pipe. This way, you’ll avoid wasting more water, and you’ll have a dry area to work on.

How to Do a Temporary Fix on a Leaky Pipe

Before you begin working on the pipeYou need to make sure that it is prepared to be fixed. To do this, you should wipe it down and dry it out so it’s clean and ready to go.

To repair the pipeYou’ll need to purchase some epoxy putty. After you’ve read its instructions, spread a thick layer of it over the crack in the pipe. Let it dry completely and cover it with water resistant tape to further secure your repair

How to Do a Temporary Fix on a Leaky Pipe

Cousino Harris Disaster Kleenup in PerrysburgTheir expertise in the business makes them the most qualified company to repair your home. Call the number above if you’d like a free estimate.