6D(SG)Tester for Soft Gelatin CapsulesPrecise testing of elasticity and burst strengthCompact and robust designProven Dr. Schleuniger® force measuringProfessional reporting including statistics

creo

2Soft gelatin capsule testing > 6D(SG)

6D(SG)

The 6D(SG) has been specifically designed for testing soft gelatin capsules. Testing the elasticity of soft gels typically serves as an indicator of whether the product can be «released-to-pack» – providing a reliable and repeatable measure to prevent failure during packaging. Utilizing the 6D(SG) is a convenient and efficient method for determining correlated gelatin moisture content values in a production environment. Four different test modes including a «burst strength test» also make the 6D(SG) an ideal instrument for R&D.

The soft gelatin capsules are placed in the instrument individually and by hand. Three types of elasticity tests can be performed by compressing the sample. Unlike conventional tablet hardness tests, these elasticity tests are not designed to break the test object. On the contrary – if a capsule bursts before the specified com-pression distance or compression force has been reached, the test result is automatically recorded as «failed». In addition, the 6D(SG) allows holding test samples in a compressed condition for a user-defined programmable time. In case the capsule does not burst during the test but instead displays some other defect, such as a bubble or slow leak, the operator can conveni-ently enter a visual pass or fail rating if required.

Elasticity test

A: Initial diameter

B: Diameter at end of the test

Test start

Measuring of initial diameter

(or width)

Compression and measuring of

diameter at the end of the test

Absolute Diameter (elasticity test)Measures the force required to compress the sample by a fixed distance (in mm). The final force measure-ment is recorded once the specified holding time has been reached.

Measurements:• Initial diameter (or width) of the capsule• Diameter of the capsule at the end of the test• Force required to compress the capsule

Percent Diameter (elasticity test)Records the force required to compress the sample by a percentage of the measured diameter. The final force measurement is recorded once the specified holding time has been reached.

Measurements:• Initial diameter (or width) of the capsule• Diameter of the capsule at the end of the test• Force required to compress the capsule

Absolute Force (elasticity test)Compresses the sample with a specified force and holds the position until the programmed holding time has been reached.

Measurements:• Initial diameter of the capsule• Diameter of the capsule at the end of the test• Force applied to the capsule

Burst Strength (hardness test)Compresses the capsule until failure occurs (= the sample breaks).

Measurements:• Initial diameter of the capsule• Diameter of the capsule at the point of failure• Force required to burst the capsule

3Soft gelatin capsule testing > 6D(SG)

Elasticity & Burst Strength Testing

Proven PrecisionThe 6D(SG) uses the same precision S-beam load cell known from the Dr. Schleuniger® Pharmatron range of tablet hardness testers. A special measuring principle and jaw design has been implemented specifically for testing soft gelatin capsules – ensuring that measured results meet industry standards. The tester’s accuracy is easy to maintain and calibration can be performed within minutes using reference standards. Thanks to its com-pact and robust design, the 6D(SG) is perfectly suited for both laboratories and production environments.

Professional ReportingUpon completion of a test run (up to 100 tested samples), a report is automatically printed without requiring PC software. In addition to individual measurements, the test report includes statistics (e.g. mean value, max. and min. values, Sabs & Srel), graphs, product information and starting date & time. Calibration and verification re-ports can also be printed whenever needed.

> 6D(SG)

Pharmatron AG | Uttigenstrasse 28 | CH-3600 Thun | SwitzerlandP +41 (0)33 227 50 00 | F +41 (0)33 227 50 01 | info pharmatron.ch

www.pharmatron.com

Your local sales & service partner

6D(S

G)_

B_E

_A4_

V001

– 0

6/20

12

Technical Specifications

6D(SG), Tester for Soft Gelatin Capsules

Diameter (width) Measuring range 0 – 33 mm (0 – 1.3 inch)

Resolution 0.01 mm

Accuracy +/- 0.25 mm

Units of measure mm

Force Measuring range Standard: up to 50NOptional: 400N / 500N / 800N

Resolution 0.1N for 50N load cell1N for 400N / 500N / 800N load cell

Accuracy +/- 1% full scale

Units of measure N, Kp, Sc or Pounds Apothecary

Hold time 0 – 300 s, programmable

Max. sample size (per test) 100

Interfaces RS 232

Power supply 115 – 230 V, 50 – 60 Hz

Weight (without packaging) approx. 10kg (24.1 lbs)

Dimensions Width 420 mm (16.5 inch)

Height 185 mm (7.2 inch)

Depth 155 mm (6.2 inch)

CE Conformity The 6D(SG) fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.

Technical specifications are subject to change without prior notice. Products illustrated in this brochure may include options or modifications not fitted as standard. No liability for errors and omissions.

creo