![index 6541 [pdf.kabutan.jp]](https://static.fdocuments.net/doc/165x107/62812488a0f7f5044b0e4483/index-6541-pdf-.jpg)
6541 26° - v2ics-documents.s3.eu-west-1.amazonaws.com
2
6541 26° A DETAIL A SCALE 1 : 15 FASTEN THE TROLLEY WITH BOLTS BEFORE LIFITNG MORE INFO IN USER MANUAL: 020058-Z-MA-001 CONDUCTOR LAYDOWN SYSTEM ID: PH-21-01 MGW: 10 000 kg 1. SLINGS: 4-LEGS ANGLED WIRE SLINGS: WLL: 10T LEG LENGTH: 6541 mm ANGLE: 26° ID: MS 76748.1CE SLING SIZE: ø20mm 6x36 WS/IWRC STANDARD: NORSOK R-002 CERTIFICATE No.: 49494 2. SHACKLES: 4x WLL 6.5 T TYPE: G-5163 ID: BH-BZ CERTIFICATE No.: 49494 029025 1:50 GENERAL WELDING TOLERANCE: PROJECT NO.: PROJECT NAME: GENERAL MACHINING TOLERANCE: SHEET (x of y): A3 REV. SIZE: E PROJECTION: SCALE: REV DATE DESCRIPTION PREP Total weight: 1 of 2 9328 KG 20058 NS-EN ISO 13920-BG NS-ISO 2768-mK 0 08.02.2021 AS BUILT MKA DCV THS 0 CONDUCTOR LAY-DOWN SYSTEM DWG NAME: PART/FILE NUMBER LIFTING ARRANGEMENT CHCKD APPR COPYING OR ANY USE OF THIS DRAWING IS NOT ALLOWED WITHOUT A WRITTEN PERMISSION FROM OIL-TECH AS STRANDSVINGEN 4, 4032 STAVANGER, NORWAY C COPYRIGHT 2018 OIL-TECH AS DRAWING NUMBER: 020058-Z-XX-001
Transcript of 6541 26° - v2ics-documents.s3.eu-west-1.amazonaws.com
654
1
26°
A
DETAIL ASCALE 1 : 15
FASTEN THE TROLLEY WITH BOLTS BEFORE LIFITNGMORE INFO IN USER MANUAL: 020058-Z-MA-001
CONDUCTOR LAYDOWN SYSTEM
ID: PH-21-01MGW: 10 000 kg
1. SLINGS:4-LEGS ANGLED WIRE SLINGS:WLL: 10TLEG LENGTH: 6541 mmANGLE: 26° ID: MS 76748.1CESLING SIZE: ø20mm 6x36 WS/IWRCSTANDARD: NORSOK R-002CERTIFICATE No.: 49494
2. SHACKLES:4x WLL 6.5 T
TYPE: G-5163ID: BH-BZCERTIFICATE No.: 49494
029025
1:50
GENERAL WELDING TOLERANCE:
PROJECT NO.:
PROJECT NAME:
GENERAL MACHINING TOLERANCE:
SHEET (x of y):
A3REV.
SIZE:
EPROJECTION: SCALE:
REV DATE DESCRIPTION PREP
Total weight:
1 of 2
9328 KG
20058
NS-EN ISO 13920-BG NS-ISO 2768-mK
0 08.02.2021 AS BUILT MKA DCV THS
0
CONDUCTOR LAY-DOWN SYSTEM
DWG NAME:
PART/FILE NUMBER
LIFTING ARRANGEMENT
CHCKD APPR
COPYING OR ANY USE OF THIS DRAWING IS NOT ALLOWED WITHOUT A WRITTEN PERMISSION FROM OIL-TECH AS STRANDSVINGEN 4, 4032 STAVANGER, NORWAYC COPYRIGHT 2018 OIL-TECH AS
DRAWING NUMBER:
020058-Z-XX-001
111
0
15500
650
4
277
392
0
197
8
7753
6700 TRANSPORT POSITION
029025
1:60
GENERAL WELDING TOLERANCE:
PROJECT NO.:
PROJECT NAME:
GENERAL MACHINING TOLERANCE:
SHEET (x of y):
A3REV.
SIZE:
EPROJECTION: SCALE:
2 of 2
20058
NS-EN ISO 13920-BG NS-ISO 2768-mK
0
CONDUCTOR LAY-DOWN SYSTEM
DWG NAME:
PART/FILE NUMBER
LIFTING ARRANGEMENT
COPYING OR ANY USE OF THIS DRAWING IS NOT ALLOWED WITHOUT A WRITTEN PERMISSION FROM OIL-TECH AS STRANDSVINGEN 4, 4032 STAVANGER, NORWAYC COPYRIGHT 2018 OIL-TECH AS
DRAWING NUMBER:
020058-Z-XX-001
Appendix A
