User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)

MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:

The standard Multi unit abutment allows a maximum 30° insertion path.

^

^

30°

Recommended tightening moment 35 Ncm.

*

The 17° Multi unit abutment allows a maximum 64° insertion path.

^ ^

64°

Recommended tightening moment 30 Ncm.

*

^

^

90°

Recommended tightening moment 30 Ncm.

*

The 30° Multi unit abutment allows a maximum 90° insertion path.

© MIS Corporation. All rights Reserved.

MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483

EC REP

®

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL

General Information.Instrument Maintenance for surgical tools:

Batch Code

Catalogue Number ®

Manufacturer

2.6mm

15°

1.3mm 1.2mm

A definition of the product.

The Multi Unit Angulated abutment assembly contents:

The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■  Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.

MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.

MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.

or

MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.

Abutment.

Gripping Bar.

3.2mm

1.2mm 15°

30°

1mm

Operating Procedure.

1

Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.

A. B. C.

2

The Multi Unit angulated abutment is now positioned in place and secured to the implant.

3

17°

CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.

Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.

In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).

2.6mm

15°

1.3mm 1.2mm

A definition of the product.

The Multi Unit Angulated abutment assembly contents:

The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■  Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.

MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.

MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.

or

MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.

Abutment.

Gripping Bar.

3.2mm

1.2mm 15°

30°

1mm

Operating Procedure.

1

Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.

A. B. C.

2

The Multi Unit angulated abutment is now positioned in place and secured to the implant.

3

17°

CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.

Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.

In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).

2.6mm

15°

1.3mm 1.2mm

A definition of the product.

The Multi Unit Angulated abutment assembly contents:

The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■  Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.

MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.

MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.

or

MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.

Abutment.

Gripping Bar.

3.2mm

1.2mm 15°

30°

1mm

Operating Procedure.

1

Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.

A. B. C.

2

The Multi Unit angulated abutment is now positioned in place and secured to the implant.

3

17°

CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.

Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.

In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).

User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)

MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:

The standard Multi unit abutment allows a maximum 30° insertion path.

^

^

30°

Recommended tightening moment 35 Ncm.

*

The 17° Multi unit abutment allows a maximum 64° insertion path.

^ ^

64°

Recommended tightening moment 30 Ncm.

*

^

^

90°

Recommended tightening moment 30 Ncm.

*

The 30° Multi unit abutment allows a maximum 90° insertion path.

© MIS Corporation. All rights Reserved.

MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483

EC REP

®

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL

General Information.Instrument Maintenance for surgical tools:

Batch Code

Catalogue Number ®

Manufacturer

User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)

MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:

The standard Multi unit abutment allows a maximum 30° insertion path.

^

^

30°

Recommended tightening moment 35 Ncm.

*

The 17° Multi unit abutment allows a maximum 64° insertion path.

^ ^

64°

Recommended tightening moment 30 Ncm.

*

^

^

90°

Recommended tightening moment 30 Ncm.

*

The 30° Multi unit abutment allows a maximum 90° insertion path.

© MIS Corporation. All rights Reserved.

MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483

EC REP

®

MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL

General Information.Instrument Maintenance for surgical tools:

Batch Code

Catalogue Number ®

Manufacturer