6003 Eng
-
Upload
valter-araujo -
Category
Documents
-
view
7 -
download
0
description
Transcript of 6003 Eng
-
R&M LoadMateElectric Chain HoistsReliable long-term performance
-
EASE OF OPERATIONInnovative design enhances versatility and ease of use Premium-grade precision gearing contributes to the
hoists compact, low-headroom design, low noise level
and smooth operation.
Integral control panel encloses all electrical components
(contactors, transformer, terminal strips, etc.) and is easily
accessed for maintenance.
Easy trolley mounting attachment meets various
application requirements. Slot in top of hoist body allows
easy changeover of top hook, push trolley or motorized
trolley mountings.
Crown tread wheels standard on push and motorized trolleys,
for use on standard I-beams and wide-flange W-beams.
Optional hour counter is available to assist with
scheduled maintenance.
SAFETYMeets and exceeds industry safety standardsAll R&M hoists are statically and dynamically tested with
a minimum of 125% rated load prior to shipping.
Electromagnetic disc brake-clutch combination is designed
for efficiency, safety, easy access and adjustment. The friction-
type torque limiter is integrated with the brake (LM1, LM05,
LM10) to ensure that the load is always stopped when the
control button is released.
Upper/lower limit switches stop the hoisting motion
when the hook reaches the top or bottom limit of travel,
providing safer operation and longer equipment life
(optional on LM1 models).
Low-voltage controls enhance operator safety. 115-volt
electrical control panel and pushbutton control are
standard; 48-volt control is available as an option.
Emergency stop button is standard (except on LM1 models).
Both control panel and pushbutton control are designed to
meet NEMA type 3R specifications.
Load hook is drop-forged and heat-treated for strength and
durability and is provided with a safety latch.
LONG LIFEBuilt for tough duty, lasting performanceEvery feature of the LoadMate hoist assembly includes rugged,
high-performance materials and quality engineering for longer
service life and less downtime.
Thermal protection of hoisting motor prevents damage
due to overheating. A 2-speed hoist motor is available,
offering more precise load handling and longer motor life
due to less wear on the brake and contactor.
Hoist body is constructed of pressure-cast aluminum for
light weight and easy handling, epoxy-painted for corrosion
resistance, and ribbed for better heat dissipation.
5-pocket chain sprocket (6-pocket on LM16) is heat-treated
and machined to a high tolerance, providing exceptionally
smooth lifting and reduced chain wear.
Load chain is electro-zinc plated, heat-treated, and has a
high tensile strength. Chain is also specially designed for
chain hoist use.
Chain guide ensures precise alignment of chain with load
sprocket, reducing wear and prolonging chain life.
REDUCED MAINTENANCEQuality keeps your hoist on thejob long past the pay-off point.LoadMate hoists are designed to run cool and maximize the
life of gears, brakes and motors. Longer com-
ponent life means less maintenance,
less downtime and lower repair
costsand that translates to
savings over the lifetime of
your hoist equipment.
EASE OF OPERATIONInnovative design enhances versatility and ease of use Premium-grade precision gearing contributes to the
hoists compact, low-headroom design, low noise level
and smooth operation.
Integral control panel encloses all electrical components
(contactors, transformer, terminal strips, etc.) and is easily
accessed for maintenance.
Easy trolley mounting attachment meets various
application requirements. Slot in top of hoist body allows
easy changeover of top hook, push trolley or motorized
trolley mountings.
Crown tread wheels standard on push and motorized trolleys,
for use on standard I-beams and wide-flange W-beams.
Optional hour counter is available to assist with
scheduled maintenance.
SAFETYMeets and exceeds industry safety standardsAll R&M hoists are statically and dynamically tested with
a minimum of 125% rated load prior to shipping.
Electromagnetic disc brake-clutch combination is designed
for efficiency, safety, easy access and adjustment. The friction-
type torque limiter is integrated with the brake (LM1, LM05,
LM10) to ensure that the load is always stopped when the
control button is released.
Upper/lower limit switches stop the hoisting motion
when the hook reaches the top or bottom limit of travel,
providing safer operation and longer equipment life
(optional on LM1 models).
Low-voltage controls enhance operator safety. 115-volt
electrical control panel and pushbutton control are
standard; 48-volt control is available as an option.
Emergency stop button is standard (except on LM1 models).
Both control panel and pushbutton control are designed to
meet NEMA type 3R specifications.
Load hook is drop-forged and heat-treated for strength and
durability and is provided with a safety latch.
LONG LIFEBuilt for tough duty, lasting performanceEvery feature of the LoadMate hoist assembly includes rugged,
high-performance materials and quality engineering for longer
service life and less downtime.
Thermal protection of hoisting motor prevents damage
due to overheating. A 2-speed hoist motor is available,
offering more precise load handling and longer motor life
due to less wear on the brake and contactor.
Hoist body is constructed of pressure-cast aluminum for
light weight and easy handling, epoxy-painted for corrosion
resistance, and ribbed for better heat dissipation.
5-pocket chain sprocket (6-pocket on LM16) is heat-treated
and machined to a high tolerance, providing exceptionally
smooth lifting and reduced chain wear.
Load chain is electro-zinc plated, heat-treated, and has a
high tensile strength. Chain is also specially designed for
chain hoist use.
Chain guide ensures precise alignment of chain with load
sprocket, reducing wear and prolonging chain life.
REDUCED MAINTENANCEQuality keeps your hoist on thejob long past the pay-off point.LoadMate hoists are designed to run cool and maximize the
life of gears, brakes and motors. Longer com-
ponent life means less maintenance,
less downtime and lower repair
costsand that translates to
savings over the lifetime of
your hoist equipment.
R&M LoadMate electric chain hoists
-
LoadMate hoists are designed to maximize productivity
with fast installation, easy operation and built-in durability.
The compact design provides low headroom and allows close
trolley approaches. R&Ms advanced design and manufactur-
ing techniques assure you of safe operation, consistent quality
and longer component life. It adds up to exceptional value
hoist equipment that saves on maintenance, repair and down-
time costs over its lifetime.
Flexibility to meet your exactrequirementsR&M LoadMate electric chain hoists offer a range of choices for
a wide variety of applications (short ton and metric ratings).
1/8 to 5 ton capacities (125 - 5000 kg)
Choice of 3 mounting configurations
10, 15 and 20 ft. lifts standard; additional lifting heights
available up to 150 ft. single fall, 75 ft. double fall
1- or 2-speed hoist motors (2-speed hoist motor ratio is 4:1)
Lift speeds from 8 to 32 FPM single-speed, 12/3 to 32/8
FPM two-speed
0.31 to 4.7 HP hoist motors
TDU (Trolley Drive Unit) available for 2-speed or
variable-speed operation
Single-speed hoists are reconnectable for 230 or 460/60/3
Two-speed hoists available for 230, 460, 575/60/3 or
380/50/3 power supply
Quality features others dontofferor offer at extra costarestandard on LoadMate hoists. NEMA type 3R protection classification
2-speed hoist motor with 4:1 speed ratio
Braking system with load limiter
Trolley brake
Plug-in pushbutton pendant
Thermal protection of hoist motor
Epoxy-painted hoist body
Electro-zinc plated load chain
Chain container
Emergency stopbuilt-in mainline contactor (except LM1)
For other requirements contact factory.
Mounting Configurations
Quality, value, versatility
LoadMate hoists are designed to maximize productivity
with fast installation, easy operation and built-in durability.
The compact design provides low headroom and allows close
trolley approaches. R&Ms advanced design and manufactur-
ing techniques assure you of safe operation, consistent quality
and longer component life. It adds up to exceptional value
hoist equipment that saves on maintenance, repair and down-
time costs over its lifetime.
Flexibility to meet your exactrequirementsR&M LoadMate electric chain hoists offer a range of choices for
a wide variety of applications (short ton and metric ratings).
1/8 to 5 ton capacities (125 - 5000 kg)
Choice of 3 mounting configurations
10, 15 and 20 ft. lifts standard; additional lifting heights
available up to 150 ft. single fall, 75 ft. double fall
1- or 2-speed hoist motors (2-speed hoist motor ratio is 4:1)
Lift speeds from 8 to 32 FPM single-speed, 12/3 to 32/8
FPM two-speed
0.31 to 4.7 HP hoist motors
TDU (Trolley Drive Unit) available for 2-speed or
variable-speed operation
Single-speed hoists are reconnectable for 230 or 460/3/60
Two-speed hoists available for 230, 460, 575/3/60 or
380/3/50 power supply
Quality features others dontofferor offer at extra costarestandard on LoadMate hoists. NEMA type 3R protection classification
2-speed hoist motor with 4:1 speed ratio
Braking system with load limiter
Trolley brake
Plug-in pushbutton pendant
Thermal protection of hoist motor
Epoxy-painted hoist body
Electro-zinc plated load chain
Chain container
Emergency stopbuilt-in mainline contactor (except LM1)
For other requirements contact factory.
Motorized trolley
Fixed top hook
Mounting Configurations
Push trolley
-
Compact, modular designCompact, modular designLoadMates new compact design provides easy access to
all major components. Its modular assembly allows for
cost-efficient repair and part replacement.
built to make your operation safer, more
Electromagnetic disc brake minimizes
hook drift by bringing the motor
to a quick, smooth stop and holds
suspended loads with the power off.
Large, integral control panel
provides good heat dissipation
and easy access.
Hoist motor is 30-minute rated,
Class F insulated TENV
with thermal protection.
Chain container is resistant
to oil and dirt.
Low-voltage pendant controller
is available with 2, 4 or 6 buttons,
plus standard emergency stop
button (except on LM1 models).
LM05/10 Shown
All models CSA approved
(except 380V models)
-
productive, more profitable.
TDU Two Speed706050403020100
0
acce
l.
spee
d
acce
l.
spee
d
dec
el.
bra
kin
g
fast
slo
w
Premium-grade precision
gearing contributes to
smooth, quiet operation.
5-pocket (6-pocket on
LM16) chain sprocket
design provides smooth
operation, less vibration,
reduced chain wear.
Load hooks heavy-duty thrust needle
bearings allow for 360 rotation
for easy positioning of the load.
Control Method Flexibility
ADDED VERSATILITYProgrammable speed settingsenhance motorized trolley operationExclusive Trolley Drive Unit (TDU) offers 2-speed or
variable-speed trolley operation. Minimum and maximum
speed settings, as well as acceleration parameters, can be
defined to provide easy and precise load placement, reduced
load swing and less wear on equipment. The 115-volt
control is designed to meet NEMA type 3R specifications.
A plug-in connection to the hoist body allows fast
installation without special tools.
TDU Variable Speed120100806040200
0
acce
l.
spee
d
acce
l.
spee
d
acce
l.
spee
d
acce
l.
spee
d
dec
el.
bra
kin
g
slo
w
fast
sele
cted
sele
cted
-
RM Manual Chain Hoist Load capacities from 1/8 ton to 3 tons
Chain sprocket on mounted bearings
Weston-style braking
Lower hook limit maintained by fixed stop on load chain
Axles, pinions and gear wheels of hardened steel;
double-reduction drive train
RL Manual Lever Puller Designed for both hoisting and pulling loads
3/4, 1-1/2 and 3 ton load capacities
Weston-style brake prevents load from being dropped
at any time
Lever directional switch allows operation from
any direction
PT Manual Push Trolley Converts fixed top hook hoist for push travel
1/2, 1, 2 and 3 ton load capacities
Wheels mounted on bearings
Wheel treads compatible with any type of
monorail girder
Adjustable for a wide range of flange widths
R&M Manual ChainHoisting Equipment
Quality support that ensures successful resultsFrom installation through full-scale operation, R&M provides you with comprehensive
support that includes our network of independent service technicians . . . an operations,
maintenance and spare parts manual with every product . . . and the protection of a
two-year warranty.
4501 Gateway Blvd.Springfield, Ohio 45502Phone: (937) 328-5100Fax: (937) 325-5319Nationwide Toll-Free 1-800-955-9967www.rmhoist.com
Bulletin No. 6004 5M-SPP-1/01 2001, R&M Materials Handling, Inc.LoadMate is a registered trademark of R&M Materials Handling, Inc.
RM Manual Chain Hoist Load capacities from 1/4 ton to 5 tons
Chain sprocket on mounted bearings
Weston-style braking
Lower hook limit maintained by fixed stop on load chain
Axles, pinions and gear wheels of hardened steel;
double-reduction drive train
RL Manual Lever Puller Designed for both hoisting and pulling loads
1/4, 3/4, 1-1/2, and 3 ton load capacities
Weston-style brake prevents load from being dropped
at any time
Lever directional switch allows operation from
any direction
PT Manual Push Trolley Converts fixed top hook hoist for push travel
1/4, 1/2, 1, 2, 3 and 5 ton load capacities
Wheels mounted on bearings
Wheel treads compatible with any type of
monorail girder
Adjustable for a wide range of flange widths
YOUR DISTRIBUTOR CONTACT IS:
R&M Materials Handling, Inc. reserves the right to alter technical specifications.
R&M Manual ChainHoisting Equipment
Quality support that ensures successful resultsFrom installation through full-scale operation, R&M provides you with comprehensive
support that includes our network of independent service technicians . . . an operations,
maintenance and spare parts manual with every product . . . and the protection of a
two-year warranty.