6 Sec Lighting Lum C-KK - flexproltd.com_MFW... · lor 3x26W. CFL/PL Series lamp at 240V. AC....
Transcript of 6 Sec Lighting Lum C-KK - flexproltd.com_MFW... · lor 3x26W. CFL/PL Series lamp at 240V. AC....
L i g h t i n g L u m i n a i r i e s
B-LTG-25
Polar Diagram (Scale: cd/klm)
MFW/193/IIC-IEC
Ex'd', IIC, IP-66° FLP/WP.
Integral / Non-integral Wellglass Luminary
TECHNICAL DATAEnclosure Type
Protection Class
Temp. Class
Construction
Rating
Glass
Wireguard
Reflector
Gasket
Component
Holder
Terminal
Cable Entry
Mounting
Hinge Arrangement
Hardware
Finishing
Name Plate
Ex-'d',' Class-1, Zone/Division-1, Gas Groups IIC,hazardous area application confirming to IS/IEC:60079-1 (Latest Edition).
Weatherproof IP-66° confirming to IS/IEC: 60529.
Up to T-3 or better.
Cast aluminium alloy LM-6.
Suitable for 80/125W. HPMV or 70W. HPSV or 70/150W. MHlor 3x26W. CFL/PL Series lamp at 240V. AC. (Integral type) or300W. GLS. Or 250W. HPMV/HPSV/MH or 150W HPSV Lampat 240V. AC. (Non-Integral type or 20/30/60/85W.LVD InductionLamp at 240V. AC.).
Clear Heat & Impact resistant Toughened "FLEXPRO" glassdome, confirming to IS/IEC : 60079-0.
MS, duly Galvanised / Epoxy powder coated.
Internal : Aluminium anodised.External : Aluminium white epoxy powder coated (Optional).
Endless neoprene rubber.
Built in heavy duty ployester filled, copper wound ballast,power factor condenser and HRC fuse (optional).
ES type, Porcelain, Shock proof.
Stud type / Cage Clamp type.
1/2 Nos. M20 (F).
Top 3/4" BSP (F) blind hole for suspension/mounting.
MS, duly Galvanised / Epoxy powdercoated.1 No. inside & 2 Nos. outside, screws duly marked.
High Tensile M. Steel duly cadmium plated.
Epoxy coated as per shade 632 of IS-5, or shade 631 onrequest.
Detailed Name & Rating plate along-with warning inscriptionlabel as per IS.
By way of "J" type Hook,
Lumens Output with 125W. HPMV Lamp
ERTL :
CCE/PESO :
BIS :
DGMS : 199 (for oil mines)
CM/L-0708044
CIMFR/TC/P/H702+CIMFR/TC/S/1092
P295191/12
INTEGRAL WELLGLASS NON-INTEGRAL WELLGLASS
L i g h t i n g L u m i n a i r i e s
B-LTG-26
TECHNICAL DATAEnclosure Type
Protection Class
Temp. Class
Construction
Rating
Glass
Wireguard
Reflector
Gasket
Component
Holder
Terminal
Cable Entry
Mounting
Hinge Arrangement
Earthing
Hardware
Finishing
Name Plate
Ex-'d', Class-1,' Zone/Division-1, Gas Groups IIC,hazardous area application confirming to IS/IEC:60079-1 (Latest Edition).
Weatherproof IP-66° confirming to IS/IEC: 60529.
Up to T-3 or better.
Suitable for 250W. HPMV / HPSV / MH. lamp at 240V. AC.
Clear Heat & Impact resistant Toughened "FLEXPRO" glassdome, confirming to IS/IEC: 60079-0.
MS, duly Galvanised / Epoxy powder coated.
Internal : Aluminium anodised.External : Aluminium white epoxy powder coated (Optional).
Endless neoprene rubber.
Built in heavy duty ployester filled, copper wound ballast, powerfactor condenser & HRC fuse (optional).
GES type, Porcelain, Shock proof.
Stud type.
1/2 Nos. M20 (F).
Top 3/4" BSP (F) blind hole for suspension/mounting.
MS, duly Galvanised / Epoxy powdercoated.
1 No. inside & 2 Nos. outside, screws duly marked.
High Tensile M. steel duly cadmium plated.
Epoxy coated as per shade 632 of IS-5, or shade 631 onrequest.
Detailed Name & Rating plate along-with warning inscriptionlabel as per IS.
Cast aluminium alloy LM-6.
By way of "J" type hook,
MFW/194/ I -IECI/ IC
Ex'd', IIC, IP-66° FLP/WP.
Integral/Non-Integral Wellglass Luminary
CIMFR :
CCE/PESO:
BIS :
DGMS :
CMRI/TC/P/H721 + CMRI/TC/P/H1123
P192640/1
CM/L-0708044
199 (for oil mines)
Polar Diagram (Scale: cd/klm)
Lumens Output with 250W.HPMV Lamp
MFW/195/I/I -IECIC
Ex'd', IIC, IP-66° FLP/WP.
Integral/Non-Integral Wellglass Luminary
L i g h t i n g L u m i n a i r i e s
B-LTG-28
TECHNICAL DATAEnclosure Type
Protection Class
Temp. Class
Construction
Rating
Glass
Wireguard
Reflector
Gasket
Component
Holder
Terminal
Cable Entry
Mounting
Hinge Arrangement
Earthing
Hardware
Finishing
Name Plate
Ex-'d', Class-1,' Zone/Division-1, Gas Groups IIC,hazardous area application confirming to IS/IEC:60079-1 (Latest Edition).
Weatherproof IP-66° confirming to IS/IEC: 60529.
Up to T-3 or better.
Suitable for 400W. HPMV / HPSV / MH. lamp at 240V. AC.
Clear Heat & Impact resistant Toughened "FLEXPRO" glassdome, confirming to IS/IEC: 60079-0.
MS, duly Galvanised / Epoxy powder coated.
Internal : Aluminium anodised.External : Aluminium white epoxy powder coated (Optional).
Endless neoprene rubber.
Built in heavy duty ployester filled, copper wound ballast, powerfactor condenser & HRC fuse (optional).
GES type, Porcelain, Shock proof.
Stud type.
1/2/3 Nos. M25 (F).
Top 3/4" BSP (F) blind hole for suspension/mounting.
MS, duly Galvanised / Epoxy powdercoated.
1 No. inside & 2 Nos. outside, screws duly marked.
High Tensile M. steel duly cadmium plated.
Epoxy coated as per shade 632 of IS-5, or shade 631 onrequest.
Detailed Name & Rating plate along-with warning inscriptionlabel as per IS.
Cast aluminium alloy LM-6.
By way of "J" type hook,
Polar Diagram (Scale: cd/klm)
10U
10U
10U
8⎠
6
4⎠
2
0
Lumens Output with 400W.HPMV Lamp
ERTL :
CCE/PESO:
BIS :
DGMS :
ERTL(E)/TES/F039/0040/03-12
P305119/1
CM/L-0708044
202 (for oil mines)