6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or...

4
MFB/77/6 Ex'd' IP-65° FLP/WP. Bulkhead Luminary CIMFR : CCE/PESO: BIS : DGMS : Lighting Luminairies B-LTG-17 TECHNICAL DATA Enclosure Type Protection Class Temp. Class Construction Rating Glass Wireguard Holder Terminal Cable Entry Mounting Earthing Hardware Finishing Name Plate Ex-'d' Class-1, Zone/Division-1, Gas Groups IIA & IIB, hazardous area application confirming to IS/IEC: 60079-1 (Latest Edition). Weatherproof IP-65° confirming to IS/IEC: 60529. Up to T-3 or better. Cast aluminium alloy LM-6. Suitable for 80/125W. HPMV or 100/200W. GLS. or 160W. MLL lamp or 18/26W. CFL/PL Series at 240V. AC. Flat clear Heat & Impact resistant Toughened confirming to IS/IEC: 60079-0. Optional. ES/BC type, Porcelain, Shock proof. Stud type. 1/2 Nos.M20 (F). Suitable for wall/Column/Steel structure etc. 1 No. inside & 2 Nos. outside, screws duly marked. High Tensile M. steel duly cadmium plated. Epoxy coated as per shade 632 of IS-5, or shade 631 on request. Detailed Name & Rating plate along-with warning inscription label as per IS. CIMFR/TC/SR/H981 + CMRI/TC/SR/1648 P294049/1 CM/L-0708044 14 (for oil mines) Cable Entry Polar Diagram (Scale: cd/klm) Lumens Output with 80W. HPMV Lamp CFL/PL MLL GLS

Transcript of 6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or...

Page 1: 6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or 80/ 125W HPMV Lamps or 160W MLL Blended lamps, designated by Cat. No. MFB/77/6,

MFB/77/6

Ex'd' IP-65° FLP/WP.

Bulkhead Luminary

CIMFR :

CCE/PESO:

BIS :

DGMS :

L i g h t i n g L u m i n a i r i e s

B-LTG-17

TECHNICAL DATAEnclosure Type

Protection Class

Temp. Class

Construction

Rating

Glass

Wireguard

Holder

Terminal

Cable Entry

Mounting

Earthing

Hardware

Finishing

Name Plate

Ex-'d' Class-1, Zone/Division-1, Gas Groups IIA & IIB,hazardous area application confirming to IS/IEC:60079-1 (Latest Edition).

Weatherproof IP-65° confirming to IS/IEC: 60529.

Up to T-3 or better.

Cast aluminium alloy LM-6.

Suitable for 80/125W. HPMV or 100/200W. GLS. or 160W.MLL lamp or 18/26W. CFL/PL Series at 240V. AC.

Flat clear Heat & Impact resistant Toughened confirming toIS/IEC: 60079-0.

Optional.

ES/BC type, Porcelain, Shock proof.

Stud type.

1/2 Nos.M20 (F).

Suitable for wall/Column/Steel structure etc.

1 No. inside & 2 Nos. outside, screws duly marked.

High Tensile M. steel duly cadmium plated.

Epoxy coated as per shade 632 of IS-5, or shade 631 onrequest.

Detailed Name & Rating plate along-with warning inscriptionlabel as per IS.

CIMFR/TC/SR/H981 + CMRI/TC/SR/1648

P294049/1

CM/L-0708044

14 (for oil mines)

Cable Entry

Polar Diagram (Scale: cd/klm)

Lumens Output with 80W.HPMV Lamp

CFL/PL

MLL

GLS

Page 2: 6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or 80/ 125W HPMV Lamps or 160W MLL Blended lamps, designated by Cat. No. MFB/77/6,
Page 3: 6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or 80/ 125W HPMV Lamps or 160W MLL Blended lamps, designated by Cat. No. MFB/77/6,
Page 4: 6 Sec Lighting Lum B-KK1 - flexproltd.com · Construction, suitable for 100/ 150/200W Glas lamps or 80/ 125W HPMV Lamps or 160W MLL Blended lamps, designated by Cat. No. MFB/77/6,