6″ Adjustable Downlight – Round - H.E. W
Transcript of 6″ Adjustable Downlight – Round - H.E. W
ORDERING EXAMPLE: 6AR - L23/9DW - OPTIONS - DIM1 - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.
HOUSING SERIES LUMENS [ 1 ] COLOR OPTIONS CONTROL VOLTAGE6AR L8 800lm
L14 1,400lmL23 2,300lm
9DW Dim to warm (95 CRI, 1800K – 3000K)
EM/7W 7-watt emergency battery [ 2 ]
EM/10W 10-watt emergency battery [ 3 ]
EM/10W/RTS 10-watt emergency battery with regressed test switch [4 ]
ATH Airtight construction [ 5 ]
CP Chicago plenum (CCEA) [6 ]
F Fuse kitSDT Stepdown transformer [ 7 ]
DIM1 1% dimming driver (0-10V signal to control dimming and CCT)
LUT Lutron Ecosystem enabled [ 8 ]
UNV 120-277V347 347V [ 9 ]
TRIM [ 1 0]
TRIM TYPE DISTRIBUTION [ 1 1 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensA Angled lens
W Wide 55° Open 55° Flush 50° AngledM Medium 35° Open 35° Flush 35° AngledN Narrow [ 1 2 ]
25° Flush 30° Angled
OF 1/2″ standard flange
SF 1/4″ mud-in flange [ 1 3 ]
Open trim typesCS Clear semi-specular
anodize WH White texture powder coat BL Black texture powder coat
Lens trim typesCS Clear semi-specular
powder coatWH White texture powder coat BL Black texture powder coat
MWT Textured white trim flange [ 1 4 ]
AD Diffuse acrylic lens [ 1 5 ]
PD Diffuse 1/8″ polycarbonate lens [ 1 6 ]
WET/CC Wet location, covered ceiling listed [ 1 7 ]
AM Anti-microbial [ 1 8 ]
MOUNTINGMOUNTING TYPE [ 1 9 ] MOUNTING HARDWARE [ 2 0 ] N Open pan for new constructionI IC-rated enclosure for new construction [ 2 1 ]
R Remodel kit [ 2 2 ]
F1 Factory-installed 2-position fixed pan bracket, universal bar hanger included [ 2 3 ]
BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 4 ]
CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 2 5 ]
FEATURES ■ Dim to warm from 1800K to 3000K CCT,
minimum 95 CRI ■ Adjustable aim with 0° - 45° tilt and 360°
rotation ■ Beam angles ranging from 25º narrow to
55º wide for tailored performance ■ Etched degree markers and directional
indicator make it simple to fine-tune the illumination angle
■ Spring clip retention system eliminates trim sag
■ Choice of open reflector or die-cast lensed trims to complement interior style
■ Contemporary design provides glare-free illumination for a soft ceiling appearance
■ Fully room-side accessible
SPECIFICATIONS ■ HOUSING – Die-cast aluminum spun and
stamped articulating mechanism with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Mounting clips allow for ceiling thickness from 1/2″ - 7/8″.
■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.
■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, acrylic lens.
■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.
■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. N and R mounting types for use in non-fire rated installations only.
■ LISTINGS – ■ cCSAus conforms to UL STD 1598;
Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.
■ Suitable for wet location under covered ceiling when specified with WET/CC option.
■ IC-rated for direct contact with insulation when specified with I Mounting Type.
■ City of Chicago Environmental Air approved when specified with CP option.
■ Complies with ASTM-E283 when specified with ATH option.
■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see
hew.com/warranty.
NOTES1 Lumen output based on full light output, O trim type,
W distribution and CS finish, 3000K/95CRI. Actual lumens may vary +/-5%. See page 2 for FIXTURE PERFORMANCE DATA.
2 N and R Mounting Types only. Not available with ATH option.3 N and R Mounting Types only. Not available with ATH option.4 Not available with WET/CC or ATH options. N and R Mounting Types
only. See page 4 for EM/10W/RTS DETAILS.5 I Mounting Type required.6 I Mounting Type required7 May be required for 347V, see product builder at
hew.com/product-builder.8 Not available with I Mounting Type.9 Not available with EM batteries.1 0 Trim ships separately.1 1 Beam angle based on CS or WH reflector finish.1 2 L and A Trim Types only.1 3 For use with mud-in plaster construction only, supplied with mud
flange installation kit. See page 3 for FLANGE TYPE DETAILS. Not available with ATH option.
1 4 Not available with WH Reflector Finish or L Trim Type.1 5 L and A Trim Types only. W distribution only.1 6 L and A Trim Types only. W distribution only.1 7 L Trim Type only. Not available with PD trim option.1 8 WH and BL Reflector Finishes only.1 9 Mounting hardware required (N and I only), ordered separately,
see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.
2 0 Additional mounting hardware options available. See page 5 for MOUNTING HARDWARE DETAILS.
2 1 L8 and L14 lumen packages only.2 2 Also used in new construction sheetrock ceilings.2 3 N and I Mounting Types only. Universal bar hanger ships
uninstalled. I Mounting requires external brackets.2 4 N Mounting Type only.2 5 N Mounting Type only.
CATALOG #: ����������������������������������������������
TYPE: ����������������������������������������������������
PROJECT: �������������������������������������������������ø6″
L8 - L14: 5-1/4″L23: 6-3/4″
1/2″ min7/8″ max
17-1/2″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 1 of 5
6AR 6″ Adjustable Downlight – Round
REV.12/14/21.70728.LA
NEW CONSTRUCTION AND REMODEL
FIXTURE PERFORMANCE DATA OPEN REFLECTOR TRIM TYPE
DISTRIBUTION DELIVERED LUMENS
CCT AT 100% (FULL OUTPUT)
CCT AT 1% (FULL DIM) WATTAGE EFFICACY
(lm/W)
L8
W 768
3000K 1800K
14.0 54.9M 800 14.0 57.1N – – –
L14
W 1347 23.4 57.6M 1402 23.4 60.0N – – –
L23 W 2206 37.7 58.6
M 2296 37.7 60.9N – – –
FLUSH LENS TRIM TYPE
DISTRIBUTION DELIVERED LUMENS
CCT AT 100% (FULL OUTPUT)
CCT AT 1% (FULL DIM) WATTAGE EFFICACY
(lm/W)
L8
W 694
3000K 1800K
14.0 49.6M 744 14.0 53.1N 738 14.0 52.7
L14
W 1216 23.4 52.0M 1304 23.4 55.8N 1294 23.4 55.4
L23 W 1991 37.7 52.9
M 2135 37.7 56.7N 2119 37.7 56.3
ANGLED LENS TRIM TYPE
DISTRIBUTION DELIVERED LUMENS
CCT AT 100% (FULL OUTPUT)
CCT AT 1% (FULL DIM) WATTAGE EFFICACY
(lm/W)
L8
W 578
3000K 1800K
14.0 41.3M 689 14.0 49.2N 703 14.0 50.2
L14
W 1013 23.4 43.3M 1208 23.4 51.7N 1233 23.4 52.8
L23 W 1659 37.7 44.0
M 1978 37.7 52.5N 2019 37.7 53.6
MULTIPLIER TABLESOPEN REFLECTOR FINISHCATALOG NUMBER
CONVERSION FACTOR
CS 1.00WH 0.89BL 0.79
TRIM
CATALOG NUMBER
CONVERSION FACTOR
AD 1 0.85PD 1 0.85
6000
4000 30002500
2000 15001 Distribution will also be affected, consult factory. ■ Photometrics tested in accordance with IESNA
LM-79. Results shown are based on 25ºC ambient temperature.
■ Wattage shown is based on 120V input. ■ Results based on 3000K, 95 CRI, full output, 0º tilt,
actual lumens may vary +/-5% ■ Use multiplier tables to calculate additional options.
PHOTOMETRY6AR-L23/9DW-DIM1-UNV-OW-OF-CS (25° tilt) Total Luminaire Output: 2192 lumens; 37.7 Watts | Efficacy: 58.1 lm/W | 95.0 CRI; 3000K CCT
0° 20°
40°
60°
80°90°
-20°
-40°
-60°
-80°-90°
0° 90°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE
HORIZONTAL ANGLE ZONAL LUMENS0º 45º 90º 135º 180º
0 2897 2897 2897 2897 28975 4047 3567 2566 1787 1442 24115 4237 3163 1469 492 345 52225 3246 2828 602 136 102 60735 2882 2122 121 29 22 55945 1885 236 12 7 7 25155 22 2 0 0 2 1365 0 0 0 0 0 075 0 0 0 0 0 085 0 0 0 0 0 090 0 0 0 0 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0 - 40 1928 880 - 60 2192 1000 - 90 2192 1000 - 180 2192 100
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 2 of 5
6AR 6″ Adjustable Downlight – Round
REV.12/14/21.70728.LA
WIDE MEDIUM NARROW
OPEN
55° 35°
FLUS
H
55° 35° 25°
ANGL
ED
50° 35° 30°
TRIM TYPE DETAILSOPEN FLUSH ANGLED
ø6″ ø5-5/8″ ø5-5/8″
FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)
ø7″
Ceiling Cutout: ø6-1/2″
ø6-3/8″
Ceiling cutout: ø6-3/4″
1/2″1/8″
ø9-1/2″ø6-9/16″
REFLECTOR FINISH DETAILSSPC Clear specular
SG Satin-glow
PW Pewter
GD Gold
CG Champagne gold
RG Rose gold
CS Clear semi-specular
WH White
BL Black
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 3 of 5
6AR 6″ Adjustable Downlight – Round
REV.12/14/21.70728.LA
MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL
17-1/2″
14″
6-1/4″
6-3/8″
ø6-1/2″
B
C
A
D
LENGTHLUMENS A B C D E F
L8 15-3/16″ 16″ 6-3/8″ 12-1/8″ 9-1/2″ 6-1/16″L14 16-5/8″ 17-1/2″ 7-7/8″ 14″ 10-1/4″ 7″
ø6.5″
E
F
Cross Section
ø6″
L8 - L14: 5-1/4″L23: 6-3/4″
Receiver Bracket
3-1/4″
2-3/4″
6-5/8″ 3-1/4″ minspace
Ceiling cutout
Driver and Junction Box
6-15/16″
4-1/8″
5-1/4″
EM/10W/RTS DETAILS
Shown Installed
Test buttonfrom EM Driver
RTS trim nut
RTS trim washer
RTS trim
RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 4 of 5
6AR 6″ Adjustable Downlight – Round
REV.12/14/21.70728.LA
MOUNTING HARDWARE DETAILS
F1 Factory-installed 2-position fixed pan bracket, universal bar hanger included, ships uninstalled
BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)
CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)
CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)
14″ minimum24″ maximum Mounts to t-bar
or nailer bar
F1 with I Mounting Type
Mounts to t-bar or nailer bar
12″ minimum24″ maximum
Mounts to t-bar
11″ minimum26″ maximum
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 5 of 5
6AR 6″ Adjustable Downlight – Round
REV.12/14/21.70728.LA