5th

Brazilian Conference on Composite Materials

BCCM 5

18th to 22nd January 2021

Proceedings of the 5th

Brazilian Conference on Composite Materials – BCCM 5

Editors

Volnei Tita José Ricardo Tarpani Marcelo Leite Ribeiro

SÃO CARLOS-SP EESC | USP

2021

University of Sao Paulo Sao Carlos School of Engineering

Dean: Professor Edson Cezar Wendland Deputy-Dean: Professor Denis Vinicius Coury

Catalog card prepared by Library Service at “Prof. Dr. Sergio Rodrigues Fontes” at EESC/USP

Flávia Helena Cassin – CRB-8/5812

ISBN 978-65-86954-05-0

Page: 1056

Electronic version in PDF available at Portal de Eventos Científicos da

EESC-USP http://soac.eesc.usp.br/index.php/bccm/5bccm

Size and dimensions: 21 cm x 29.7 cm (paper sheet A4)

Brazilian Conference on Composite Materials (5. : 2021 :

São Carlos)

B827p.5 Proceedings of the 5th Brazilian Conference on Composite

2021 Materials [electronic resources] / Editors: Volnei Tita,

José Ricardo Tarpani, Marcelo Leite Ribeiro. -- São Carlos :

EESC/USP, 2021.

1056 p. – Electronic date

ISBN 978-65-86954-05-0

1. Composite Materials. I. Tita, Volnei. II. Tarpani, José

Ricardo. III. Ribeiro, Marcelo Leite. IV. BCCM (5. : 2021 :

São Carlos. V. Title.

Technical information

Publication of the São Carlos School of Engineering of the

University of São Paulo (EESC-USP).

Editors

Volnei Tita

Department of Aeronautical Engineering - Sao Carlos School of Engineering

University of Sao Paulo

José Ricardo Tarpani Department of Materials Engineering - Sao Carlos School of Engineering

University of Sao Paulo

Marcelo Leite Ribeiro

Department of Aeronautical Engineering - Sao Carlos School of Engineering University of Sao Paulo

National Scientific Committee

Antonio Anceloti Federal University of Itajubá (UNIFEI)

Antonio José Félix de Carvalho EESC/University of São Paulo (USP)

Carlos José de Araujo

Federal University of Campina Grande (UFCG)

Edgar Dutra Zanotto Federal University of Sao Carlos (UFSCar)

Edson Cocchieri Botelho São Paulo State University (UNESP)

Henrique Coelho Fernandes

Federal University of Uberlandia (UFU)

João Reis

Fluminense Federal University (UFF)

José Daniel Diniz Melo

Federal University of Rio Grande do Norte (UFRN)

Maria Odila Hilario Cioffi São Paulo State University (UNESP)

Mariana Doina Banea Federal Center of Technological Education (CEFET/RJ)

Maurício Vicente Donadon Technological Institute of Aeronautics (ITA)

Ricardo de Medeiros Santa Catarina State University (UDESC)

Sandro Campos Amico Federal University of Rio Grande do Sul (UFRGS)

Silvio Romero de Barros

Federal Center of Technological Education (CEFET/RJ)

Tulio Hallak Panzera

Federal University of São João Del Rei (UFSJ)

Internacional Scientific Committee

Amir Asadi Texas A&M University (USA)

Andrew Rhead University of Bath (UK)

Carosena Meola University of Naple (Italy)

Dirk Vandepitte

KU Leuven (Belgium)

Eelco Jansen Rotterdam University of Applied Sciences (Netherlands)

Frederic Lebon Aix-Marseille University (France)

Humberto Almeida Jr Queen's University Belfast (UK)

Jandro L. Abot The Catholic University of America (USA)

Lucas F. M. da Silva

University of Porto (Portugal)

Marino Quaresimin University of Padova (Italy)

Nicholas Fantuzzi University of Bologna (Italy)

Nuno Silvestre University of Lisbon (Portugal)

Ramesh Talreja Texas A&M University (USA)

Reinaldo Ramos Rodrigues

Univ. de La Habana (Cuba)

Rui Miranda Guedes

University of Porto (Portugal)

Sofia Teixeira de Freitas TU Delft (Netherlands)

Suong Van Hoa Concordia University (Canada)

Xavier Maldague University of Laval (Canada)

Publisher

Library Service - Sao Carlos School of Engineering - University of Sao Paulo

Researcher Support Section

Library of EESC/USP Avenida Trabalhador são-carlense, 400 Pq Arnold Schimidt - CEP 13566-590 - São Carlos – SP e-mail address: cassinp@sc.usp.br

ORGANIZATION

GOVERNAMENTAL AGENCY

SUPPORT

SPONSORS

PREFACE

The Editors are grateful to all authors for their effort in writing the papers in time and acknowledge the outstanding work of all people involved with the organization of 5th Brazilian Conference of Composite Materials – BCCM 5, mainly the students and technicians, who helped in direct or indirect way the publication of the present Proceedings. The Editors also would like to thank Professor Edson Cezar Wendland (Dean of Sao Carlos School of Engineering of USP) for the support provides to have an edition of the Brazilian Conference on Composite Materials (BCCM) in Sao Carlos,

which is the most important conference on composite materials in Brazil.

The BCCM 5 was the first edition in virtual format. There were more than 160 oral presentations distributed in five virtual rooms, and ten plenary lectures occurred in a virtual auditorium. Prof. Reinaldo Rodríguez Ramos (University of Havana – Cuba) talked about “Multiscale modeling applied to the study of heterogeneous structures”. Prof. Marino Quaresimin (University of Padova – Italy) discussed about “An integrated approach to design and monitor composite structures under in-service fatigue loadings”. Prof. Jandro L. Abot (The Catholic University of America – USA) talked about “Self-sensing composite materials using carbon nanotube yarns: A new paradigm in integrated structural health monitoring”. Prof. Dirk Vandepitte (KU Leuven – Belgium) explained about “Identification of uncertainty and quantification of variability in long fibre reinforced composite materials”. Prof. Amir Asadi (Texas A&M University – USA) discussed about “Scaling up the manufacturing of hierarchical nano/micro reinforced composite materials”. Prof. Sofia Teixeira de Freitas (Delft University of Technology – The Netherlands) talked about “On the influence of the laminate properties on the failure of adhesively bonded composite structures”. Prof. Mauricio V. Donadon (Technological Institute of Aeronautics – Brazil) commented about “A CLT based constitutive model to predict distortions and residual stresses in semi-crystalline thermoplastic composites”. Prof. José D. D. Melo (Federal University of Rio Grande do Norte – Brazil) explained about “Double-Double laminates: two sets of continuous ply angle variables to replace legacy quad laminates”. Prof. Edson Cocchieri Botelho and coworkers (Sao Paulo State University – Brazil) presented about “Studies of multifunctional composites based on buckypapers”. Finally, Prof. Ricardo de Medeiros (Santa Catarina State University – Brazil) explained about “Structural Health Monitoring

techniques applied to analyze composite structures”.

The BCCM 5 had around 250 delegates from 21 different countries (Brazil, Chile, Argentina, Colombia, India, Italy, France, Finland, Portugal, Spain, Mexico, UK, Germany, USA, Ireland, Austria, Algeria, San Marino, Netherlands, Sweden and Morocco), including Professors and Post-Doctorate researchers, as well as PhD, Master and undergraduate students. This shows the high level of the event in terms of the presentations and the works published in the present Proceedings, which covers different topics such as “Material, Manufacturing and Material Processing”, and “Material Testing, Characterization and Material Properties”, as well as “Numerical and

Experimental Structure Analysis and Applications”.

Volnei Tita José Ricardo Tarpani Marcelo Leite Ribeiro

The Editors

TABLE OF CONTENTS

Acoustical properties of polyester/jute/glass hybrid composites André Luis Lima Flores, Amanda Albertin Xavier da Silva, Rafael de Avila Delucis, Sandro Campos

Amico

Adhesion performance of composite and geopolymer sandwich structures Ana Passos, Marcio Moreira Arouche, Ricardo Aguiar, Hector Costa, Silvio de Barros, Eduardo

Sampaio

Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method

Matheus Vilar Mota Santos, Murilo Sartorato, Volnei Tita, Marcelo Leite Ribeiro

Analysis of the failure of a CFRP mast of a small racing sailboat

Daniel Scandiuzzi Valença de Castro, Douglas Gama Caetano, Cesar Giron Camerini, Hector Guillermo Kotik, Thomaz Augusto Kras Benatti, Alexandre Teixeira de Pinho Alho

Anti-optimization based uncertainty analysis for composite laminates

Herbert Martins Gomes, Ewerton Grotti, Pedro Bührer Santana

Application of AC impedance spectroscopy for the evaluation of graphene oxide

cementitious composites Gediael Felipe da Silva, Sandro Martini, Dimas Alan Strauss Rambo, Renan Pícolo Salvador

Application of Maxwell homogenization method to composite materials

Ana Elena Pérez Soto, Reinaldo Rodríguez Ramos, José A. Otero

Applying multiscale approach on the CFRP material characterization to improving crashworthiness prediction of composite bumper system CAE model

Rogerio Keizo Nakano, Rodrigo Frois Merigo

Assessment of the effect of fiber percentage in the glass fiber reinforced slag-based geopolymer

Lais Alves, Nordine Leklou, Silvio de Barros

Bamboo fiber reinforced epoxy composite using Guadua Angustifolia fibers extracted via veneer rotary peeling

Kelvin Masakazu Kuroki Iwasakia, Pedro Almeida Reis, Ricardo de Medeiros

Bending behavior of sandwich panels with XPS core and cementitious composite faces reinforced with jute fabric

Adilson Brito de Arruda Filho, João Victor Gomes Borges da Cruz, Sande dos Santos Batista, Ricardo Fernandes Carvalho, Paulo Roberto Lopes Lima

Boundary element modeling of interface shear for twill fabric laminated composite

under contact Cristiano João Brizzi Ubessi, Rogério José Marczak

Buckling load analysis of composite structures with thermal variation

Alexandre de Macêdo Wahrhaftig, Kaique Moreira Matos Magalhães

Buckling optimization in variable stiffness composite laminated João Victor Barreto Netto, Marcelo Leite Ribeiro, Murilo Sartorato, Volnei Tita

Candeia oil (Eremanthus Erythropappus) influence on PVC/lignocellusosic composite

mechanical and antibacterial properties Lais Kohan, Alexandre Oka Thomaz Cordeiro, Vitor Baptista Ferrari, Débora Noma Okamoto, Júlia

Baruque-Ramos, Cristiane Reis Martins

Carbon/carbon composites obtained from peek/carbon fiber Thiago Teixeira, Luíza dos Santos Conejo, Edson Cocchieri Botelho

Characterization of Acrocomia aculeata endocarp and its potential use as bio-

aggregate for cement-based matrix Saulo Ferreira, Mariana Silveira, Luisa Menali, Uasmim Zidanes, Matheus Dias, Adrian

Zimmermann, Neven Ukrainczyk, Eduardus Koenders

Characterization of coffee husk (Coffea arabica) and its use in lightweight bio-concrete

production Saulo Rocha Ferreira, Priscila Carolaine Barros, Mariana Silveira, Luisa Menali, Andreas Maier, Uasmim Zidanes, Matheus Dias, M’hamed da Gloria, Romildo Toledo Filho, Eduardus Koenders

Characterization and simulation of the draping behaviour of thermoplastic fabrics

Dante Krivtzoff De’ Grandis, Vitor Reis, Mauricio Vicente Donadon, Alfredo Rocha de Faria, Mariano A. Arbelo

Chemical characterization of Portland cement based pastes with the addition of coffee

husk ashes Thaiane Oliveira Marcelino, Eduardo Hélio de Novais Miranda, Fabrício de Campos Vitorino,

Leonardo Seibert Kuhna, Saulo Rocha Ferreira

Compacted cementitious composites made with HDPE waste: a statistical approach Kívia Mota Nascimento, Lívia Ávila de Oliveira, Tulio Hallak Panzera, Carlos Eduardo Sanches da

Silva

Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the

composite laminate PPS-C Francisco de Assis Toti, Jorge David Aveiga Garcia, Alessandra Soares Pozzi Tarpani, José Ricardo

Tarpani

A comparative study of 3d stitched composites and composite laminate. Part I: flexural properties

Lucas Moura Montenegro Reis, Vera Lúcia Arantes, Arnaldo Carlos Morelli

Comparison of ultrasonic methods for detecting defects in unidirectional composite material

Vanessa Vieira Gonçalves, Daniel Marcus Giglioli de Oliveira, Auteliano Antunes dos Santos Junior

Composite beams under large and moderate deformation accounting for material couplings

Gefferson Cleuber Silva, Maurício Vicente Donadon, Flávio José Silvestre, Alessandro Guimarães

Composite configuration optimization by metaheuristic algorithm

Ígor Simon, Herbert Martins Gomes

Composite nanomembranes for acoustics applications: searching for a noiseless cabin Elvis Carneiro Monteiro, Suchilla Garcia Leão, Nathalia Caroline Ferreira Menezes, Matheus Norton,

Camila Fernanda da Silva, Thiago Teixeira Nardy Barrioni, Antonio Ferreira Avila

Composite repairs to restore the structural integrity of tubes with external corrosion Ana Lúcia Fampa Seabra d’Almeida, Jonathan Stefling Aguiarb, Ronaldo Domingues Vieira, Jorge

Coutinho Diniz, José Luiz de França Freire

Compression behavior of a bio-based polyurethane foam reinforced with aluminum hydroxide

Enio Henrique Pires da Silva, Júlia Camargos Ferreira de Aguiar, Marcelo Leite Ribeiro, Volnei Tita, Romeu Rony Cavalcante da Costa

Computation of derivatives of objective function with respect to laminate compliance

components Cassio Wallner, Sergio Frascino Muller Almeida

Computation tool based on finite element simulations for prediction of composite

materials effective elastic properties Heloísa Zanardi, Ricardo Afonso Angélico

Computational modeling of steel fiber reinforced concrete

Victor Sloboda, Roberto Dalledone Machado, Ricardo Pieralisi

Crack pattern of a composite model material submitted to a temperature increase

assisted by DIC Igor Paganotto Zago, Rodrigo Bresciani Canto, Ricardo Afonso Angélico

Damage detection of composite beam structures using vibration response and artificial neural networks

Pedro Almeida Reis, Kelvin M. K. Iwasakia, Luísa R. Völtz, Eduardo L. Cardoso, Ricardo De Medeiros

Debonding quantification in large wind turbine blades based on gaussian process

regression Jessé Paixão, Samuel da Silva, David Garcia Cava

Defining specimen size for the wedge splitting test to analyze the fracture process zone

Rafael Vargas, François Hild, Rodrigo Bresciani Canto

Development and characterization of Zro2.24mgo ceramics with addition of Tio2 for use as TBC

Bruna de Souza Constantino, Natasha Lopes Gomes, Ricardo Artur Sanguinetti Ferreira, Yogendra Prasad Yadava

Development of semi-concurrent multiscale routine for hybrid polymer composites

containing carbon fibre and silica microparticles Filipe José Viana Ribeiro, Túlio Hallak Panzera, Maikson Luiz Passaia Tonatto

The development of wavelets analysis to generate an acoustic emission pattern in a

new rotocasting manhole Santino Loruan Silvestre Melo

On the development of multi-directional polyamide composite laminates by ultrasonic

plastic welding R. Kalyan Kumar, M. Omkumar

Dynamic-mechanical properties of silanized microcrystalline cellulose/epoxy

composites Roberta Motta Neves, Ademir José Zattera, Sandro Campos Amico

Effect of different surface treatments on the thermal properties of Curaua fibre and

Curaua/ polyester composites Linconl Araujo Teixeira, Sandra Maria da Luz

Effect of geometry on physical and material properties of filament wound laminates Leonardo G. Scherer, José Humberto S. Almeida Jr, Cristiano B. Azevedo, Sandro C. Amico

The effect of high temperatures on steel fiber reinforced concrete

Raphael Felippe, Ronney Rodrigues Agra, Ramoel Serafini, Antonio Domingues de Figueiredo

Effect of ionizing radiation applied to PLA used as compatibilizing agent in reinforced eggshell PBAT/PLA bio-based composites

Elizabeth C. L. Cardoso, Duclerc F. Parra, Sandra R. Scagliusi, L. G. H. Komatsu, Ademar B. Lugão

Effect of multi-walled carbon nanotubes on the thermal and mechanical properties of

epoxy resins Jorge de Souza e Silva Neto, Daniel Kioshi Kawasaki Cavalcanti, Henrique Fernandes Medeiros de

Queiroz, Ricardo Alexandre Amar de Aguiar, Doina Mariana Banea

Effect of the Nco/Oh ratio on the physical mechanical properties of bio-based polyurethane/natural fiber composites

Joziel A. Cruz, Otávio Bianchi, Sandro C. Amico

The effect of stress and strain control on polyurethane elastomers’ behavior Lívia Mendonça Nogueira, Daniel Alves Castello, Lavinia Borges, Bruno Pinho dos Reis

The effective aspect ratio as an efficiency measurement of mechanical reinforcement

of poly (Vinyl Butiral) by bidimensional nanoparticles Josué Marciano de Oliveira Cremonezzi, Ricardo Jorge Espanhol Andrade, Guilhermino José

Macedo Fechine

Effects of vortex-cooled compressed air on surface quality in end-milling CFRP Rodrigo F. Klein, Nícholas Hoffmann, Wagner A. F. Pereira, André J. Souza

Effects of water absorption on the mechanical properties of jute/polyester laminated

composites Rafael P. Evangelista, Victor A. S. Barbosa, Larissa R. Reis, Peter M. Reis Jr., Carlos França Jr.,

Mirtânia A. Leão, Sandro F. César

Electromechanical evaluation of ionomeric polymer metal composites using video

analysis Matheus Colovati Saccardo, Ariel Gustavo Zuquello, Roger Gonçalves, Kaique Afonso Tozzi, Carlos

Henrique Scuracchio

Elephant grass and cellulose renewable composites: a study of pretreatments and

mechanical properties Fernando Cabral Lage, Almir Silva Neto, Leandro Soares de Oliveira

Evaluation of the pressing temperature of polyurethane foam composites and plant

fibers Caroline R. P. de Paula, Allan Kley

Experimental assessment of glass/epoxy high velocity impact performance at different

temperatures Maciej Klosak, Rafael Santiago, Amine Bendarma

An experimental investigation of laminated fiber-reinforced composites under shear-

after-impact conditions Gabriel Sales Candido Souza, Marcelo Leite Ribeiro, Volnei Tita

Evaluation of mechanical properties and capillary water absorption in mortars of Amazon rainforest natural fibers cured in a pressurized autoclave with insufflated Co2

Régis Pamponet da Fonseca, Janaíde Cavalcante Rocha, Malik Cheriaf

Evaluation of a novel route for the incorporation of nanofibrillated cellulose into low density polyethylene

Jonas Rech Tedesco, Lílian Vanessa Rossa Beltrami, Ademir José Zattera, Sandro Campos Amico

Evaluation of thermal performance in ceramic composites using substitution with rice husk ash and calcined alumina

Juliana Calage Quevedo, Camila Vargas Cardoso, Marco Antonio Durlo Tier, Ederli Marangon

Evaluation of the wettability of epoxy/granite composites through contact angle Jorge Luiz Siqueira da Costa Neto, Antonio Renato Bigansolli, Belmira Benedita de Lima Kunh

Exotherm issues predictions during the curing of a thick epoxy matrix and effects on

elastic properties Larissa de Fátima Chaves Pereira, Nadège Sophie Bouchonneau da Silva, Christian Jochum

Experimental characterization and modeling of poroviscoelastic materials Isadora Ruas Henriques, Lucie Rouleau, Lavinia Maria Sanabio Alves Borges, Daniel Alves Castello,

Jean-François Deü

Experiments on adhesively bonded joints of hybrid reinforced jute/glass fibre composites

Henrique Fernandes Medeiros de Queiroz, Daniel Kioshi Kawasaki Cavalcanti, Doina Mariana Banea

Exploring the openCV library for image processing in long-pulse thermography

José Jerônimo Rabelo Faria, Alfredo Rocha de Faria

Fatigue characterization for sisal fibre/epoxy laminate composites

Mateus da Silva Batista, Alisson de Souza Louly, Sayra Oliveira Silva, Sandra Maria da Luz

Fiber length effect on the performance of piassava fiber reinforced composites Rafael Gomes de Castro, Felipe do Carmo Amorim, João Marciano Laredo dos Reis

Finite element and domain decomposition methods in fibrous composites via

asymptotic homogenization Ernesto Iglesias-Rodríguez, Julián Bravo-Castillero, Manuel E. Cruz, José A. Mesejo-Chiong, Leslie

D. Pérez-Fernández

Fluorinated rubber with aramid pulp and imidazolium salt-treated aramid pulp Vinícius Demétrio da Silva, Eduardo Fischer Kerche, Marly Maldaner Jacobi, Henri Stephan

Schrekker, Sandro Campos Amico

Free vibration of beams using strain gradient notation finite element method Tulio Paim Horta, João Elias Abdalla Filho

Frequency-domain fatigue analysis of bonded joint under random loads

Luis Felipe Gomes Molina, Denys Eduardo Teixeira Marques, Mateus Nasser Silva, Marcelo Leite Ribeiro, Volnei Tita

Fused deposition modeling fiber content evaluation with digital image treatment

techniques Jorge Guillermo Díaz, Alberto Pertuz, Octavio Andrés González, Juan León-Becerrra, Maria

Jaramillo

Hybrid effect on the ballistic impact response of S2-glass/aramid hybrid laminates

Amanda Albertin Xavier da Silva, Ana Clara Machado Miranda, Andrea Manes, Sandro Campos Amico

An hybrid finite element/experimental analysis of aged single-lap joints nanomodfied by

graphene Thaiane Oliveira Toscano Ximenes, Elvis Carneiro Monteiro, Antonio Ferreira Ávila

A hyper-surface normal projection method for steered-fiber composite optimization

Herbert Martins Gomes, Pedro Bührer Santana

Influence of the adhesives application time on composite repair systems for metallic pipes with through-thickness damage

Diogo Lieres da Silva, Bruno Moura Miranda, Heraldo Silva da Costa Mattos

Influence of hornification on plaster plates strengthened with sisal structural fabrics Sande dos Santos Batista, Mariana Santos Nunes, Adilson Brito de Arruda Filho, Paulo Roberto

Lopes Lima, Ricardo Fernandes Carvalho, Sandro Fábio César

Influence of leather fiber on modulus of elasticity in bending test and of bend strength

of particleboards Mariana Ferreira Trevisan, Renato Cardoso de Oliveira, Rodrigo Andraus Bispo, Caroline Graminha

Gilio, Felipe Reis Rodrigues, Sérgio Augusto Mello da Silva

Influence of moringa Oleifera’s natural fiber in cement composites

Marina Keiko Ishihara, Guilherme Jorge Brigolini Silva, Cristiane M. Finzi-Quintão, Kátia Monteiro Novack

Influence of a PEG-b-PPG-b-PEG copolymer addition on properties of an epoxy resin

Ana Paula Cercal, Bruna Louise Silva, Luiz Antônio Ferreira Coelho

Infrared thermography for impact damage analyses on curved CFRP laminates used in

geostationary satellites Henrique Coelho Fernandes, Hans-Georg Herrmann, Hai Zhang, Francisco J Goyo Brito, Joao

Henrique N Dal Pra, Jose Ricardo Tarpani

Injection over-molded polycarbonate-aluminum composite structures

Gean Henrique Marcatto de Oliveira, Jéssica Marinho de Oliveira Silva, Sergio de Traglia Amancio-Filho, Rene Martim Volu, Getúlio Vasconcelos, Rudimar Riva, Leonardo Bresciani Canto

Introduction to the study of mechanical properties of terpolymer PP/EPDM mixtures

Sandra Regina Scagliusi, Elizabeth C. L. Carvalho, Ademar B. Lugão

Investigation on the existence of physical-chemical interaction between epoxy matrix

and fibrillated cellulose in nano / microcomposites Alessandra C.S.P. Tarpani, Maisa M. A. D. Maciel, José Ricardo Tarpani, Volnei Tita

Investigation of rheological behavior of self-compacting and high performance

composite concretes Rodrigo Andraus Bispo, Gabriela Oliveira Vicente, Gean Pereira da Silva Júnior, Daniel Ukuessunga

Benjamim, Marco Antonio de Morais Alcântara

Kriging surrogate model applied to analyze the dynamic response of composite

structures Vanessa Guimarães Soares de Menezes, Kleison Antonio Possenti, Luiz Fernando dos Santos

Souza, Volnei Tita, Ricardo de Medeiros

Licuri fiber insertion in portland cement, and its effects on mechanical properties Gislane N. de Andrade, Vinícius M. B. Medeiros, Camila C. da Silva, Mirtânia A. Leão

Low desnity polyethylene nanocomposite containing Zn/Ti layered double hydroxide Silvia Jaerger, Daiane Amaral de Ramos Nogueira, Douglas Santos de Oliveira, Monielly Viomar

Machado, Rafael Marangoni

Magnetic orientation of sisal fibers in cementitious matrix: mechanical behavior and image analysis

Dimas Alan Strauss Rambo, Marcos Fabrízio de Menezes Freitas, Renan Pícolo Salvador, Sandro Martini, Mateus Bonansea Gonçalves

Mechanical behavior of jute and jute / e-glass fiber reinforced polymer composites

Vitor da Silva Lacerda, Ana Claudia Rangel da Conceição, Catarina da Nova Scherer, Michel Giffoni Santos, Mirtânia Antunes Leão

Mechanical behavior of short Curaua fibres as reinforcement of different polymeric

composites Vilson D. Libera Junior, Linconl A. Teixeira, Janaine M. de Oliveira, Vitor M. Zago de Sousa, Sandra

M. da Luz

Mechanical properties of composite coatings epoxy/graphen nanoplatelets on

galvanized steel Juliana Tibola Bertuoli, Lilian R. Beltrami, Ademir José Zattera

Mechanical properties of jute fiber fabric/polyester resin composites produced by resin

transfer molding Dione Pereira de Castro, André Luís Lima Flores, Vinícius Florencio Aguiar Drago, Alessandra

Lavoratti, Sandro Campos Amico

Mechanical properties of sandwich panels made from disposed bottle caps core and

glass fiber composite skins Lucas Braga Lopes Gato, Túlio Hallak Panzera, Maikson Luiz Passaia Tonatto, Sergio Luiz Moni

Ribeiro Filho, Leandro José da Silva

Methodology for composite pressure vessel optimization based on CLT Pedro Almeida Reis, Kelvin Masakazu Kuroki Iwasaki, Caetano Butter Bez, Ricardo de Medeiros

A methodology for evaluating the mechanical behavior of composites based on plain-

weave fabrics Matheus Madrid, Sandro Campos Amico, Rogério José Marczak

A methodology for modeling variable axial laminates: a case study of a uniformly

loaded circular plate Maísa M. A. D. Maciel, José Humberto S. Almeida Jr., Marcelo L. Ribeiro, Volnei Tita

Micromechanical model for transversal tensile strength of unidirectional Laminae

Lucas L. Vignoli, Marcelo A. Savi, Ranulfo M.C. Neto

Mixed-mode fracture of composite-to-metal bonded joints Marcio Moreira Arouche, Sofia Teixeira de Freitas, Silvio de Barros

Modeling of shape memory alloy composite

Lucas L. Vignoli, Marcelo A. Savi

Modelling of circular honeycomb sandwich panels containing glass fibre skins and

bottle caps core Lucas Braga Lopes Gato, Túlio Hallak Panzera, Maikson Luiz Passaia Tonatto, Sergio Luiz Moni

Ribeiro Filho, Leandro José da Silva

Modelling of polymer-based honeycomb sandwich panels under bending

Daniel Francisco Bristot, Maikson Luiz Passaia Tonatto, Sandro Campos Amico

Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone

model Jailto Antonio Prado da Silva, Lucas Filipe Martins da Silva, Marcelo Leite Ribeiro, Volnei Tita

Morphological, thermal and chemical characterization of coffee husks and its ashes

Eduardo Hélio de Novais Miranda, Thaiane Oliveira Marcelino, Leonardo Seibert Kuhn, Saulo Rocha Ferreira

Morphological and thermal evaluation of poly (ether imide)/carbon fiber/graphene

composites Mariana Baldini Santos, Luis Felipe de Paula Santos, Michelle Leali Costa, Edson Cocchieri Botelho

A numerical approach to evaluate the influence of the piezoelectric layer position on

the effective properties of a smart laminated composite Matheus Rodrigues Silva, Humberto Brito-Santana, Reinaldo Rodríguez-Ramos, Volnei Tita, Ricardo

de Medeiros

Numerical calculation to cross-sectional properties and bending stress analysis of composite beams

Pedro Fellipe Martins Pires, Tiago dos Santos

A numerical homogenization technique for unidirectional composites using polygonal finite generalized elements

Murilo Sartorato

Numerical modeling of spalling damage in FRC Leandro Ferreira Friedrich, Wang Chong

Numerical modelling of helical cables using beam-based metaelements in the nonlinear displacement range

Eduardo Antonio Wink Menezes, Sandro Campos Amico, Rogério José Marczak

Open-hole compression strength of carbon fibre fabric reinforced low melting paek composite

José Everardo Baldo Junior, Mariano Andrés Arbelo

Optimization of the laminate stacking sequence for a flexible subsea pipeline of

Peek/CF composite Lucas Aparecido Fernandes da Silva, Salvino Cezar Mello de Macêdo, Ricardo Afonso Angélico,

Rodrigo Bresciani Canto

Optimization of the tensile characteristics of bio-composite Curaua-epoxy using Taguchi method

Gilberto García del Pino, Abderrezak Bezazi, Haithem Boumediri, Antonio Claudio Kieling, Sofia

Dehaini Garcia, Aristides Rivera Torres, Rogerio de Souza Soares, José Costa de Macêdo Neto, Jamile Dehaini, Tulio Hallak Panzera

Overall viscoelastic properties of fiber-reinforced hierarchical composites

Oscar L. Cruz-González, Reinaldo Rodríguez-Ramos, Frédéric Lebon

Overview of mode I strain energy release rate calculation for adhesive joints

Fernando Madureira, Marcelo Leite Ribeiro, Volnei Tita

A preliminary investigation on papaya bast fibre reinforced epoxy composites

Gabriela Luiza Cota Coura, Júlio César dos Santos, Lívia Ávila de Oliveira, Rodrigo Teixeira Santos Freire, Túlio Hallak Panzera, Fabrizio Scarpa

Postbuckling response of functionally graded hybrid composite plates under uniaxial

compression Shamsher Bahadur Singha, Sudhir Vummadisetti

Post-mortem analyses of bonded stiffened composite panels tested under uniaxial

compression Rita de Cassia Mendonça Sales, Geraldo Maurício Cândido, Maurício Vicente Donadon

Prediction of the effective young modulus of 2D periodic cells via finite element

analysis Fernando Luis Schiavon, Ricardo Afonso Angélico

Preliminary investigations on sandwich panels made aluminium skins and circular PVC

honeycomb core Thaís da Costa Dias, Júlio César dos Santos, Lívia Ávila de Oliveira, Túlio Hallak Panzera, Rodrigo

Teixeira Santos Freire

Preparation of biodegradable composite with palm heart agroindustry waste biomass

Caroline Rodrigues Pereira de Paula, Matheus Samponi Tucunduva Arantes

Processing characterization of uncured Sisal/Epoxy Prepreg Sayra Oliveira Silva, Sandra Maria da Luz

Production and characterization of benzoxazine resin composites reinforced with 20%

macadamia nutshell biomass Cirlene Fourquet Bandeira, Ariana Carmem Antunes da Costa, Sérgio Roberto Montoro, Michelle

Leali Costa, Edson Cocchieri Botelho

Production and characterization of ceramic matrix composites (CMC) based on Zirconia-Titania reinforced with rare earth oxide for turbine exhaust system coating

Vitor de Moura Lucindo, Renata Oliveira Domingues, Natasha Lopes Gomes, Andréa Gonçalves de Sousa, Ricardo Artur Sanguinetti Ferreira, Yogendra Prasad Yadava

Production and characterization of green polymeric composite using wood waste

Júlia Camargos Ferreira de Aguiar, Miguel Felipe Galera da Silva, Ênio Henrique Pires da Silva, Wires Costa Machado, Caroline Rodrigues Pereira de Paula, Paulo Augusto Nardi, Ana Paula de

Moura, Romeu Rony Cavalcante da Costa

Production of composite obtained from wood saw dust and natural adhesives for using in wood framing house system

Alexandre Jorge Duarte de Souza, Julio Cesar Molina, Daniel Villas Boas

Recent advances in NDT for impact damage detection in composite materials

José Jerônimo Rabelo Faria, Alfredo Rocha de Faria

Rheological characterization of HDPE and soapstone composites

Giulia Simão Sousa, Geovane de Almeida Santos da Silva, José Roberto Moraes d’Almeida

A semi-analytical model for crippling load prediction in composite stiffeners

Abel Ricardo Camargo Montestruque, Maurício Vicente Donadon, Flávio Luiz de Silva Bussamra

Soft metacomposites characterization: the kirigami geometry/stress field correlations Thiago Teixeira Nardy Barrioni, Elvis Carneiro Monteiro, Milvia Oliveira Dos Reis, Antonio Ferreira

Ávila

Spectroscopic analysis of carbon fiber modified with imidazolium ionic liquids Bilal Ghafoor, Henri Stephan Schrekker, Sandro Campos Amico

Stepped isostress method in flexural mode for creep analysis of epoxy with

imidazolium ionic liquid Eduardo Fonseca, Vinicius Demetrio da Silva, Liva Pupure, Roberts Joffe, Henri Stephan Schrekker,

Sandro Campos Amico

Stress concentration assessment of orthotropic composites Lucas L. Vignoli, Brenno Tavares Duarte, Paulo Pedro Kenedi

A study on the best conventional shapes for composite repair patches

Leonel Echer, Carlos Eduardo de Souza, Rogério José Marczak

Study of effective properties in multilayered composites with different fracture modes at

the interface David Guinovart-Sanjuan, Reinaldo Rodríguez Ramos, Kuppalapalle Vajravelu, Raúl Guinovart Diaz,

Humberto Brito-Santana, Volnei Tita

Study of the influence of carbon nanotubes buckypaper in the thermal behaviour of

paek/carbon fiber composite Gabriel Damasceno Feres, Luis Felipe de Paula Santos, Edson Cocchieri Botelho, Michelle Leali

Costa, Winand Kok

Study of the morphological and mechanical properties of plasticized PVC composites containing bamboo sawdust for application in footwear

Alexandre O.T. Cordeiro, Carla M. S. Sousa, Lais Kohan, Luciano Pinheiro, Larissa O. Duarte, Júlia Baruque-Ramos, Cristiane R. Martins

Study of poly lactic acid composites with cellulose extracted from the pineapple crown

Ivan Douglas Campos, Duclerc F. Parra

Surface analysis on face sheets of sandwich structures after aging and compression tests

Lucas Ferreira Lima Santos, Ayrton Alef Castanheira Pereira, José Roberto Moraes d’Almeida

Systematic review of glass microspheres (HGM) as reinforcement in cementitious matrix

Paulo Victor Matiello Contini, Moisés Ferreira Eleutério Silva, Luara Batalha, Gleice Maria de Araujo Ribeiro, Cristina Toca Perez

Temperature evaluation in CFRP drilling

Cristiano Devittea, André João de Souza, Guilherme Vargas Schirmer

Thermal conduction modelling of composites by embedding technique

Rafael Corrêa Salomão, Rogério Carrazedo

Thermal evaluation of composite films produced with nanofibrillated

cellulose/LDPE/HDPE Danieli Dallé, Lilian Vanessa Rossa Beltrami, Cleide Borsoi, Ademir José Zattera

Thermal stability and UV resistance of nanocellulose/tannin hybrid films

Andrey Pereira Acosta, Patricia Soares Bilhalva dos Santos, André Luiz Missio, Rafael de Avila Delucis

Thermographic assessment of the failure of an orthotropic composite plate

Paulo Pedro Kenedi, Lucas Lisboa Vignoli, Jorge de Souza e Silva Neto, Carlos Filipe Cardoso Bandeira

Thermomechanical analysis of functionally graded high-temperature pressurized

cylinders Carlos David R. Melo, Marcelo S. Medeiros Junior, Evandro Parente Junior

Thin-film graphene oxide/polysulfone composite membranes for water desalination

processing Robson Pereira de Almeida, Cristiano Francisco Woellner, Jairo José Pedrotti

Three-point bending and impact behaviour of coir fibre-reinforced castor oil composites Guilherme G. Braga, Fábio A. Rosa, Júlio C. dos Santos, Robson B. D. Pereira, Rodrigo T. S. Freire,

Túlio H. Panzera

Towards a toughness gain in a high-performance fiber reinforced concrete by magnetic

fiber alignment Igor da Silva Brito, Sandro Martini, Dimas Alan Strauss Rambo, Renan Pícolo Salvador

Unified formulation for composite plate structures: implementation and evaluation Gregório Felipe Oliveira Ferreira, Humberto Almeida Jr., Marcelo Leite Ribeiro, António Joaquim

Mendes Ferreira, Volnei Tita

On the use of asymptotic homogenization to predict the coupled components of the effective constitutive matrix of laminated composites

Bruno Guilherme Christoff, Humberto Brito-Santanab, Ramesh Talreja, Reinaldo Rodriguez Ramos, Marcelo Leite Ribeiro, Volnei Tita

Use of variable angle tow composites for plates under compressive load

Diego Magela Lemos, Carlos Alberto Cimini Junior

The using of digital image correlation in the mechanical characterization of composites

Juliana Ferreira Barbieri, Rafael Celeghini Santiago, Marcílio Alves

Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites

Francisco Javier Goyo-Brito, José Ricardo Tarpani

Vibrations of orthotropic functionally graded strain gradient nano plates via hermitian finite element formulation

Michele Bacciocchi, Nicholas Fantuzzi, Antonio J.M. Ferreira

Viscoelastic and continuum in-plane damage models for fibrous composite materials: a

review Matheus Urzedo Quirino, Volnei Tita, Marcelo Leite Ribeiro