5620_NM_R8.0_ds[1]
Transcript of 5620_NM_R8.0_ds[1]
A proven and scalable network management solution for multitechnology, multiservice networks
The Alcatel-Lucent 5620 NetworkManager (NM) is an open, scalable,highly available multiservice networkmanagement platform that is deployedin more than 1,000 networks, includ -ing 350 of the world’s largest serviceproviders. The 5620 NM managesAlcatel-Lucent’s Multiservice Wide AreaNetwork (MSWAN) product portfoliothat includes TDM, frame relay, ATM,Ethernet, DSL and IP-capable networkelements.
What’s New in Release 8.0In Release 8.0, the Alcatel-Lucent 5620NM continues with the strong focus onfeatures which are relevant to mobilenetwork environments: from addingsupport for the Alcatel-Lucent PSAXfamily of products to enabling manage-ment of important features deliveredby the Alcatel-Lucent 7670 RoutingSwitch Platform (RSP) R7.1, 7670 EdgeServices Extender (ESE) R5.1, and 7470Multiservice Platform (MSP) R9.1.
Release 8.0 of the Alcatel-Lucent 5620NM adds the management support foradvanced protection capabilities (1:Nline card protection on the 7670 ESE),new cards (new 1-port OC-3/STM-1cards with SFP modules, new 16-portT1/E1 MS card on the 7470 MSP, new 3-port DS3 CR Card on the 7470 MSP/7670 ESE) and new I/Os (STM-4/OC-12I/O for the Edge Service Card on the7670 RSP), as well as the managementsupport for a number of featureenhancements (enhanced CR/IMA,multishelf ESC).
For 3G and HSPA enviroments, theAlcatel-Lucent 5620 NM deliversextensive support for ATM, includingfeatures such as round trip delay, andalso provides advanced managementcapabilities for pseudowires/labelswitched paths (LSPs) and IP-VPNs onthe 7670 RSP. With the Path MigrationTool (PMT), a mobile network operatorcan perform en masse (bulk) assignmentor reconfiguration of thousands ofNode Bs to RNCs.
Alcatel-Lucent 5620 NMN E T W O R K M A N A G E R | R E L E A S E 8 . 0
2 Alcatel-Lucent 5620 NM | Release 8.0
For mobile environments where networkrestoration is of paramount importanceand SPVCs are deployed, the 5620 NMprovides full management of both point-to-point and point-to-multipoint SPVCs.
For 2.5G/GPRS environments, additionalframe relay traffic management enhance -ments allow for greater control andflexibility in mapping of frame relay to ATM traffic parameters.
Integration with OSS/BSS systems isfurther improved via an improvedscript management tool that offersCMIP/CORBA OSS interface (OSSI)support.
K E Y F E A T U R E S
• Point-and-click GUI with end-to-endmanagement and provisioning
• Full visibility and management ofresources from the card/node level to the network level
• Ability to create user-defined customnodes with limited management
• Flexible configuration andreconfiguration
• Alarm reporting
• Remote diagnostics andtroubleshooting
• Real-time statistics collection andreporting
• Full redundancy
• Integration with OSS/BSS systems(CORBA/CMIP)
• Ability to segment, control access toand manage separate parts of net -work views (for network sharingscenarios)
Integration with Alcatel-Lucent 5620 Service AwareManager (SAM)
• Common desktop solution for facili -tating the management of Alcatel-Lucent networking solutions for jointdeployment of the Alcatel-Lucent7670 RSP, 7750 Service Router (SR),7450 Ethernet Service Switch (ESS)and 7710 Service Router (SR)
• Provision of topology discovery, devicemonitoring, integrated alarm man age -ment and navigation to the Alcatel-Lucent 5620 SAM, all from a singlemanagement application (Alcatel-Lucent 5620 NM)
• Releases supported: up to 5620 SAM R5.0
Carrier-Grade Managementand Reliability
• Fault management capabilities,including real-time status reporting,generation of trouble tickets, alarmsand fault notifications, performancemonitoring, diagnostics andmaintenance
• Diagnostic tools for network problemisolation including remotely initiatedand managed loopbacks, busy-outs,centralized maintenance connections,forced errors, reroutes and pathdiagnostics
• Automatic rerouting function trig -gered by failures of links or logicalelements (resources)
• Network management redundancyfor high availability (non-collocated,geographically distributed active andstandby systems)
• Secure access for operator sessions
• Complete management solutionfrom the access to the network corefor DSL service such as residentialhigh-speed Internet, business services,extreme density services and voiceover DSL
• Single desktop solution for networkmonitoring and operation of mixeddata and transport networksthrough the 5620 NM and Alcatel-Lucent 1353 Generic ElementManager (GEM)
Scalability
• 10,000 core, edge and access ATMnodes and 500,000 remote networkdevices
• 1.5 million network connections(paths); a combination of up to onemillion PVCs and one million SPVCsor MPLS LSPs
• 255 simultaneous operator sessions
• 1,000 service level partitions (virtualswitched networks)
• 128 physical network partitions(virtual backbone networks)
3Alcatel-Lucent 5620 NM | Release 8.0
Platform Requirements• Minimum requirements
¬ SunBlade 1000 or later
- Example: SunBlade 1500,4GB RAM, 36 GB HDD, 1 CPU@ 750 MHz, CDROM,Ethernet or ATM connection
¬ Solaris 10
¬ X11R5-compliant X-serversoftware (for remote operatorX-sessions)
Standards Compliance• ISO 8879:1986 – SGML
• X.Org – X11R5
• ITU-T TMN, including CMIP,M.3100, X.721, X.723, X.734
• TeleManagement Forum –Bandwidth ManagementEnsemble NMF-038
• Object Management Group(OMG)
¬ CORBA (Common ObjectRequest Broker Architecture)interface
• Joint Inter-Domain ManagementCMIP-CORBA Transaction
• IETF SNMP
• Alcatel-Lucent DistributedStatistics Collector Standards
¬ AT&T 54016
¬ ANSI T1.403
¬ ITU.T G.821, G.822
T E C H N I C A L S P E C I F I C A T I O N S
www.alcatel-lucent.comAlcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All othertrademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.© 2007 Alcatel-Lucent. All rights reserved. 23048 (06)