5-OptiX iManager T2000 V2R7C01 FAQ-20081208-A.ppt

T2OOO V2R6C01 Internal use only
Zhong Jianjuan 29151
Huawei Confidential
:32-35pt : R153 G0 B0 : FrutigerNext LT Medium : Arial :30-32pt : R153 G0 B0 : :20-22pt (2-5) :18pt : : FrutigerNext LT Regular : Arial :18-20pt (2-5):18pt : :

.
Preface
This course introduces the typical problems concerning the installation, upgrade, and operation of the T2000 V2R7C01 and the use of the network management system maintenance suite. This course can help engineers to use the T2000 well.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential

.
Reference
Huawei Confidential

.
Course Objectives
After this course, you are supposed to well understand the following:
Typical problems of the installation, upgrade, and operations of the T2000 V2R7C01.
Typical problems of the use of the network management system maintenance suite (MSuite for short).
Huawei Confidential

.
Contents
Huawei Confidential

.
Q1:Failed to uncompress the installation software package a.zip that is downloaded from http://support.huawei.com
The failure may be caused by the following:
The disk space is insufficient.
The file system of the disk where the software will be saved after uncompression is not NTFS.
The path for saving the uncompressed files is too long so that certain files failed to be uncompressed.
To solve the problem, do as follows:
If the failure is caused by the first cause, you should uncompress the package to the disk with sufficient free space. In total, 1.27G disk space is required for the files uncompressed from the dvd1_a.zip and dvd1_b.zip (Windows XP) packages or from the dvd1_a.zip and dvd1_c.zip (2003 server) packages.
If the failure is caused by the second cause, you should change the file system of the disk to NTFS and then uncompress the package. For details of changing the file system, see the next page.
Huawei Confidential

.
Q2:How To Convert FAT32 File System To NTFS In Windows XP
Ensure that the installation package is decompressed to an NTFS partition. It is recommended that you decompress the installation package to a partition where the operating system is not located.
Do as follows to view the type of the file system for partitioning:
Right-click My Computer on the desktop of the Windows operating system, and choose Manage. The Computer Management window is displayed.
Click Disk Management on the navigation tree in the left pane to view the file system type.
If the file system type is not NTFS, do as follows to convert the file system type to NTFS:
Choose Start > Run. The Run window is displayed.
Enter cmd, and click OK.
Enter convert Drive letter where the installation package is decompressed: /FS:NTFS. For example, enter convert F: /FS:NTFS if you need to decompress the installation package to partition F. Follow the prompt in the screen to enter the corresponding information.
Restart the computer.
Notes:
This operation will takes several minutes. System will prompt "Conversion Finished" after converting successfully. Even though this conversion will not loss data, but there is still risk. It's better backup data to other partition drive first before executing. It is also not encouraged to do conversion toward C Drive .
If you install the T2000 from the hard disk, you need to decompress the installation software packet (T2000V200R007C01B0xx_en_win32_x86_dvd1_a.zip and T2000V200R007C01B0xx_en_win32_x86_dvd1_b.zip) to the same directory on the Window XP Professional OS. Make sure that the decompressing directory is short and contains no space, punctuation, or non-alphabetic character. The installation package is decompressed to an NTFS partition. Otherwise, you need to convert the required partition to the NTFS partition before decompressing the package. For details, see 2.5.1 Checking Operating System Settings .
If you install the T2000 from the hard disk, you need to decompress the installation software packet (T2000V200R007C01B0xx_en_win32_x86_dvd1_a.zip and T2000V200R007C01B0xx_en_win32_x86_dvd1_c.zip) to the same directory on the OS of the Windows Server 2003 Standard Edition or the Windows Server 2003 R2 Standard Edition. Make sure that the decompressing directory is short and contains no space, punctuation, or non-alphabetic character. The installation package is decompressed to an NTFS partition. Otherwise, you need to convert the required partition to the NTFS partition before decompressing the package. For details, see 2.5.1 Checking Operating System Settings .
Ensure that the installation package is decompressed to an NTFS partition. It is recommended that you decompress the installation package to a partition where the operating system is not located. Do as follows to view the type of the file system for partitioning:
Right-click My Computer on the desktop of the Windows operating system, and choose Manage. The Computer Management window is displayed.
Click Disk Management on the navigation tree in the left pane to view the file system type.
NOTE:
If the file system type is not NTFS, do as follows to convert the file system type to NTFS:
Choose Start > Run. The Run window is displayed.
Enter cmd, and click OK.
Enter convert Drive letter where the installation package is decompressed: /FS:NTFS. For example, enter convert F: /FS:NTFS if you need to decompress the installation package to partition F. Follow the prompt in the screen to enter the corresponding information.
Restart the computer.
Huawei Confidential

.
Q3:How to reduce the disk space occupied by the T2000
Description
After installation, the T2000, database and database files will occupy about 4G disk space.
After the T2000 server is installed, the T2000 software occupies about 1.8G disk space, which cannot be reduced. In addition, a T2000 client is provided on the T2000 server and is used to support the remote installation or upgrade by using CAU.
To avoid the problem of insufficient disk space, do as follows:
Recommendation:
Way1: Select the disk where the T2000/SQL2000/NMSdata directory is saved according to the free space of each disk, during the new installation of T2000 V2R7C01 or a later version, you can select the folder for MSSQL2000 and NMSdata. Note: If the installation directory of the database is not changed, the SQL2000/NMSdata directory will be on the default disk or the original disk used in the earlier T2000 version.
Way2: Deploying the needed instance. Then there are only the database for the needed instance.
Optional( only for Laptop): modify the configuration of database to reduce the disks pace occupied by T2000.
Huawei Confidential

.
Deploying the needed instance to reduce the disk space occupied by the T2000
Deploying the needed instance by the Network Management System Maintenance Suite(MSuite) tool to occupied the kind of the database.
Take the following instances for example, delete these instances: MarineNemgr_1,ExtNemgr_1,Eml_mml,EmfSyslog, and so on.
Stop and Delete the instances that are not used at present ,if need later ,add the Instance
Only deploy the required instance
Huawei Confidential

.
Modifying the configuration files to reduce the disk space occupied by the T2000 running on Laptop
Reduce the disk space occupied by the database file NMSdata. This method is mainly used for the Laptop
For the new Installation including T2000 and MSSQL2000 on Laptop:
When the T2000 is installed for the first time, before you restart the system, you can modify the configuration file of the database, to proportionally reduce the disk space occupied by database files. After saving the modified configuration file, restart the system. Proceed with the deployment and database initialization according to prompts. Note: This method is applicable to only the new installation. For details of modifying database files, see the next slides.
If you have already installation the T2000 successfully, you can follow the steps in the next slides to modify the configuration files.
Huawei Confidential

.
Step1: Open the Enterprise Manager provided by MSSQL2000
Run start > Program >Microsoft SQL Server>Enterprise Manager to open the Enterprise Manager
Optional: Under the Console Root \Microsoft SQL Servers\SQL Server Group, if there is showing “no item” or blank, the using the shortcut menu item “New SQL Server Registration ”, according to the Wizard, create a registration for local server. Available servers: select the (local); the login user: sa, the password is null.
Huawei Confidential

.
Step2: Delete the User database created by initialization T2000 database.
Notes: If there are not existing the user database for T2000V2R7, then skip and go step3.
In the Windows, select all the user database used by T2000,use the shortcut menu item “Delete” to delete the database. Notes: If you want to backup the data in the database ,please use T2000DM tool to backup the database before deleting these database.
Huawei Confidential

.
Step3:Modify the configuration file of database
The files to be modified:”T2000DBServer_database.xml” and “additionaldatabase.xml” under the path: C:\T2000\server\database\xml\platform\win32\ . Use the notepad to open these files. Take the T2000DBServer_database.xml for example as following.
Notes: The method to modify the additionaldatabase.xml is the same as modifying the T2000DBServer_database.xml
Huawei Confidential

.
Step4: Use the T2000DM tool to initialization T2000 database.
Start the Database Management Tool.
On Windows, open the Resource Browser. In the \T2000\server\database directory, run "T2000DM.exe".
Select T2000DBServer from the left-hand Database Server List.
Enter the password of user sa.
NOTE: The default password of user sa is null.
Click Database Maintenance.
Click OK to initialize the T2000 database.
Step 5: After initializing T2000 database, you can check whether the disk space occupied by NMSdata folder has been reduced. If need, start the T2000 server.
Huawei Confidential

.
Q4: How to improve the running efficiency of the T2000 V2R7C01 on Laptop?
The methods are as follows:
If all subsystems are deployed and all processes are started, about 2G virtual memory is occupied. As a result, you need to configure the virtual memory of the computer after installing the T2000. Moreover, 4G virtual memory is recommended. You can also add memory. According to the latest information, the price of the 1G memory for a laptop is RMB100( reference price.)
If the memory is 768M or 1G, it is recommended that you select the required subsystems during the installation and deploy the required instances after the installation. In this way, the running efficiency of the system can be improved.
Install all the Subsystem
Stop and Delete the instances that are not used at present ,if need later ,add the Instance
Only deploy the required instance
Only run the required process
Huawei Confidential

.
Q5:How to move the T2000 V2R7C01 that is originally installed in the C:\T2000 directory to the D:\T2000 directory?
After the T2000 V2R7C01 is installed in the C:\T2000 directory, the free space of disk C is insufficient. To move the T2000 to the D:\T2000 directory, do as follows:
Step1: Modify the values of the environmental variables IMAP and IMAPROOT. That is, change the directory that the environmental variables indicate to the new installation directory.
Step2: Stop the T2000 server and client. Move the T2000 software from disk C to disk D, that is, to the D:\T2000 directory.
Step3: To modify the T2000 installation directory information saved in the MSuite, find the nmssysinfo.xml file in the C:\HWMSuite\server directory, open it by using the Notepad, search for and replace the information related to the T2000 installation directory, such as C:\T2000, with the new directory.
Step4: Modify the path for toolkit, otherwise the toolkit can not be started normally by the System monitor Client reporting the files is not existed. Use the notepad to open the file : \T2000\server\conf\sysmoni\monitoolkit.cfg , check the path for toolkit:
MoniBinPath=../../toolkit/server
MoniLibPath=../../toolkit/server
Huawei Confidential

.
Description
The common cause for failed to initialize T2000 database as following:
Cause1: The disk space for NMSdata folder is not enough.
Cause2: There are user databases under the NMSdata before initializing T2000 database, due to without deleting the user database when uninstalling the MSSQL 2000 .
Cause3: MSSQL Server is not start;
Cause4:Failed to connect the T2000DBServer to MSSQL Server
Cause5:the password for sa is wrong. The default password for sa is null.
Steps
Step1: Check the disk space for NMSdata, It need at least 3.5G disk space.
Step2: if you have uninstalled the MSSQL2000, delete the user database under the NMSdata folder;
Step3:check the MSSQL server is started or not. If not ,start the MSSQL Server;
Step4: Use the Enterprise Manager provided by MSSQL2000 to check the status of user database, if the status of the user database is “suspect”, use the shortcut menu item “delete” to delete the abnormal user database.
Step5:Check the ODBC connect. More detail refer to the guide : OptiX iManager T2000 PC Version Manual Installation Guide-20080115-B (3.4 Manually Installing the MSSQL 2000 and SP4 )
Step6: Use the correct password for sa to initialize T2000 database again.
Huawei Confidential

.
Q7:What should be modified on the T2000 if the IP address of the computer where the T2000 is installed is changed?
When the IP address of the computer where the T2000 server is installed is changed, the T2000 can still be started. You need to check the following items related to the IP address:
The IP address of the T2000 server that the T2000 client is connected to should be modified accordingly. (If the T2000 server and client are installed on the same computer, the IP address of the T2000 server that the T2000 client is connected to can be set to 127.0.0.1.)
The IP address of the T2000 server that the MSuite is connected to need to be updated manually. Enter the new IP address of the T2000 server and synchronize the information about the MSuite with that of the T2000 server.
If the northbound CORBA interface is enabled, you need to configure the information related to the CORBA again.
Huawei Confidential

.
Q8: About the Product Manual CD released with the version
Requirement
In order to ensure timely delivery of product documentation to customers and improve customer satisfaction, the items on further clarifying the requirements of the Change Management Process V2.10 (http://w3.huawei.com/pdmc/) for product documentation delivery following the software version change are specified as follows:
After implementing the change of software version, the Release Owner (RO) hands over the customized Release Notes and the documentation to the customer. If the customer asks for the documentation CD-ROM, the local representation office will have to make a copy for the customer by themselves. After documentation delivery, the release owner must submit change implementation report to the customer and ask for signing confirmation.
Huawei Confidential

.
Q8: About the Product Manual CD released with the version
Get the Product Manual CD from Support Website:
The Product Documents marked “ For Customer “ can be delivered to customers
Huawei Confidential

.
Q9:How to use the Product Manual CD for T2000V2R7C01
Product Manual: The newest Product Manual CD for T2000V200R007C01 is as following:
Document link
This compact disc is applicable to the OptiX iManager T2000 (V200R007C01). The CD-ROM includes product description, software and HA system installation, administration, configuration, maintenance, troubleshooting and FAQ of using OptiX iManager T2000. By reading the CD-ROM, the reader gets to know the installation, operation etc. of OptiX iManager T2000. Also, the reader can know how to install, configure and maintenance the OptiX equipments of Huawei through the OptiX iManager T2000.
After upgrade the T2000 version to V2R7C01 for our customer, please install this document CD on the NMS computer for customer and tell our customers how to use these document CD to help work.
Huawei Confidential

.
Use Guide
After unzip the Product Manual CD, double click the “autorun.exe”, in the pop-up dialog , Use the install to install the CD to local computer, or Browse Document to browse the content of the CD. It support the full text search.
Huawei Confidential

.
Description
For the HA system delivered from HQ, it has been installed the HA system with the Veritas Demo License( for Veritas Hot/Warm HA system and SunCluster HA)
We need to apply a formal Veritas license for HA System.
The Veritas License Application has been changed to the Support Website as following, the guide refer to : Support website license application guide
Notes:
Please choose the correct application type, and fill in correct Serial No., Contract No., Software item and Quantity according to the License Confirm Sheet packaged with software media kit when you submit application .
After getting the formal Veritas license, refer to the Installation Guide or Guide to Replacement of Veritas Licenses-20080806-B
Huawei Confidential

.
Contents
Huawei Confidential

.
Support installation and upgrade on SUN Solaris 10 + Sybase 12.5
Windows
Support installation and upgrade on Windows 2003 Server R2 SP2 + SQL Server 2000- Standard Edition
Support upgrade on Windows 2003 Server Standard Edition SP1+ SQL Server 2000- Standard Edition
Support installation and upgrade on Windows XP Professional SP2 + SQL Server 2000-Personal Edition
Support upgrade on Windows 2000 Professional SP4 + SQL Server 7.0
Support upgrade on Windows 2000 Server SP4+ SQL Server 7.0
Support upgrade on Windows XP Professional SP2+ SQL Server 7.0
HA System
Veritas Remote/Local HA System (Solaris 10+Sybase 12.5+Veritas 5.0/4.1)
1:N High-Reliable Redundancy Backup Solution (Solaris 10+Sybase 12.5)
Notes:
From T2000V2R7C01, not support running on Solaris 8; and not support the watchman HA system.
The Windows 2000 Professional patch SP4 is required.
The Windows 2000 Server patch SP4 is required.
The Windows XP Professional patch SP2 is required.
The Windows 2003 Server patch SP1 is required.
The Windows 2003 Server R2 patch SP2 is required.
Upgrading and running the T2000 on Sun Solaris 8 + Sybase 12.0 is not supported. The T2000 data can be upgraded after the system is upgraded to Sun Solaris 10 + Sybase 12.5.
Huawei Confidential

.
Q1:In which situation, we need to reapply the T2000 license?
For the T2000 V200 license, the license of R version supports forward compatibility not backward compatibility. So from the version earlier than V2R7C01 to V2R7C01 and later version, the old T2000V200 license can be used in the V2R7C01.
In the following situations, we need to apply for a new license:
T2000 new functions
Newly supported equipment
Upgrading From T2000V100 to T2000V200
Huawei Confidential

.
Q2: Is the MSSQL2000 required to be installed again after the T2000 is upgraded from an earlier version to V2R7C01?
Description:
In the case of the T2000 that is installed on Windows, the MSSQL2000 is not required to be installed again after the T2000 is upgraded from an earlier version to V2R7C01.
The upgrade process of the T2000 is as follows:
Back up the T2000 of the earlier version and the data of the T2000.
Uninstall the T2000 of the earlier version.
Install the T2000 V2R7C01 by using the installation software package, including the installation, deployment, and initialization of the T2000.
Restore the data of the T2000, including the importing of script files, uploading of the NE configuration data, and restoration of the customized information.
More details refer to the OptiX iManager T2000 V200R007C01B02f Single Server Version Upgrade Instructions in the version release document package for the T2000V200R007C01B02F.
Huawei Confidential

.
Q2: Is the MSSQL2000 required to be installed again after the T2000 is upgraded from an earlier version to V2R7C01? (conf.)
Note:
The databases MSSQL and NMSdata are saved in the original directories. New database files will occupy about 2.1G disk space, for normally using ,it need at least 3.5G disk space. Therefore, make sure that the free disk space is sufficient before initializing the databases.
If the free disk space is insufficient, you can modify the configuration file of the database to release the disk space on for the Laptop. For details, see How to reduce the disk space occupied by the T2000.
After the configuration file is modified, if the database of the T2000 V2R7C01 was ever initialized, you need to delete the generated database by using the MSSQL Enterprise Manager. Then, initialize the database. Note that you need to delete only the user database for T2000, Except for the common databases, such as master, model, msdb,pubs, Northwind and tempdb (Notes: these database can not be deleted, otherwise the MSSQL will run abnormally).
Huawei Confidential

.
Q3:How to switch the T2000 version if multiple T2000 versions (V200R006C01 and V200R007C01) exist on the Laptop?
Description:
The T2000 V200R006C01 has been installed on the portable computer and works in the normal state. In this case, you need to change the name of the original T2000 directory to T200V2R6 or other names before installing the T2000 V200R007C01; or select another disk for installing the T2000 V200R007C01. Then, install the T2000 V200R007C01 by referencing the installation guide of the T2000. After the installation of the T2000 V200R007C01 is complete, it should be started normally.
Before the installation of the T2000 V200R007C01, ensure that the disk where the T2000 is to be installed has sufficient disk space. The database files of the two versions occupy about 4.5 GB of the disk space. If you need to switch the T2000 version, back up the T2000 data first.
From V200R007C01 to V200R006C01
Modify the iMAP environment variable and set the value to the server directory of the T2000 V200R006C01.
Delete the IMAPROOT environment variable.
Initialize the database and restart the T2000. After the T2000 is started, restore the T2000 data by using the backup MO data.
Check the toolkit configuration files: \T2000\server\sysmoni\monitoolkit.cfg , check the path for toolkit:
MoniBinPath=../../toolkit/server
MoniLibPath=../../toolkit/server
If not, modify the path as above, or the absolute path for Toolkit server.
Huawei Confidential

.
Q3:How to switch the T2000 version if multiple T2000 versions (V200R006C01 and V200R007C01) exist on the Laptop?
From V200R006C01 to V200R007C01
Modify the iMAP environment variable and set the value to \T2000\server\conf of the T2000 V200R007C01.
Add the IMAPROOT environment variable as follows: IMAPROOT=E:\T2000 (For example, the T2000 V200R007C01 is installed in the E:\T2000 directory.
Check the MSUITE environment variable and set the value to the installation directory of the network management system maintenance suite, such as E:\HWMSuite.
(Optional) If you change the directory where the T2000 V200R007C01 is installed, you need to modify the T2000 installation directory that is recorded in the network management system maintenance suite (C:\HWMSuite\server\nmssysinfo.xml) in addition to the preceding operations.
Initialize the database and restart the T2000. After the T2000 is started, restore the T2000 data by using the backup MO data.
Notes:The MO data of T2000 for different version is not compatible.
Huawei Confidential

.
Q4:Failed to log in to the T2000 by using a T2000 client after the T2000 server and client are upgraded
After the upgrade to the T2000 V2R7C01, you need to configure the access control list of client IP addresses. Then, you can log in to the T2000 by using a T2000 client.
The system ACL refers to the access control of IP addresses for the T2000. All users must log in to the T2000 server by using a T2000 client with a specific IP address or in a specific network segment. (You can use user admin for the first login after the installation.) To set the ACL, do as follows:
Choose System > NMS Security Settings > ACL from the Main Menu. The ACL dialog box is displayed.
Click Add. In the Add dialog box displayed, enter the IP address or network segment.
Huawei Confidential

.
Contents
Huawei Confidential

.
Q1: How to Start and Shutdown of MSuite?
Normally, the MSuite server is started or shutdown automatically with operating system.
Manually start MSuite by running the following commands on the server:
On UNIX, run the following command as user root:
/etc/rc3.d/S91msserver start
On Windows, run the following command in the DOS window:
net start msserver
Manually shutdown MSuite by running the following commands on the server:
On UNIX, run the following command as user root:
/etc/rc3.d/S91msserver stop
On Windows, run the following command in the DOS window:
net stop msserver
Huawei Confidential

.
Q2: How to Log in to the MSuite Client
After the MSuite server is started, double-click the MSuite icon on the desktop of the T2000 to start the MSuite client.
You can also start the MSuite Client by the following program:
On Windows, perform the C:\HWMSuite\client\bin\msclient.bat;
On UNIX, perform the /opt/HWMSuite/client/bin/msserver.
Enter the IP address of the T2000 server and password in the Login dialog box, and Click OK to log in to the network management maintenance suite client.
The IP Address is the Host IP Address of T2000 server.
The default communication port between the MSuite client and server is TCP 50000.
The initial password is MSUITE .
If the host name or IP address of the operating system where the T2000 server is installed is changed, during login the MSuite client, input the new IP address.
When the MSuite client is performing a deployment operation, if the operation is disrupted due to a network or system failure, the interrupted operation resumes the next time when you log in to the MSuite client.
Huawei Confidential

.
SDH NE management process
multiple instances can be deployed to enhance the management efficiency of the subsystem. Usually, a single instance is sufficient for the T2000 to manage the equipment. The number of NEs managed by all the instances cannot exceed 3000.
WDM NE management process
NGWDM NE management process
RTN NE management process
Extended NE management process
End-to-end SDH management process
End-to-end OTN management process
End-to-end ETH management process
ASON WDM management process
ASON SDH management process
SNMP northbound interface process
The subsystem can be classified as single-instance subsystem and multi-instance subsystem according to the number of supported instances.
A single-instance subsystem means that one subsystem can start only one instance in the entire T2000.
A multi-instance subsystem means that one subsystem can start multiple instances in the entire T2000 at the same time. Normally, only the NE Manager is a multi-instance subsystem. If the server capacity allows, you can deploy instances for the NE Manager according to the network scale, to expand the management capacity of the T2000.
In the case of managing the subsystem on a per-NE basis, multiple instances can be deployed to enhance the management efficiency of the subsystem. Usually, a single instance is sufficient for the T2000 to manage the equipment. Only when the number of equipment for management is close to the management capability of the subsystem (less than or equal to 500), multiple instances can be deployed to enhance the management efficiency of the subsystem. For example, the management capability of one subsystem is 3000 equivalent NEs. If you need to manage 2700 equivalent NEs, the difference of 3000 and 2700 is 300, which is less than 500. In this case, two instances can be deployed to enhance the management efficiency of the subsystem.
In the case of the end-to-end management and the northbound interface subsystem, only one instance can be deployed for each subsystem.
Huawei Confidential

.
Select a deployment mode based on the actual situation.
Automatic deployment: It is applicable to the users who obtain the T2000 commercial license where the number of equipment supported is the same as the actual number of equipment.
Custom deployment: It is applicable to the users who do not obtain the T2000 commercial license or the users who obtain the T2000 commercial license or non-commercial license where the number of equipment supported is different from the actual number of equipment. Manually select the instance that you want to deploy, and complete the instance deployment according to the settings.
Huawei Confidential

.
Description:
You can use the MSuite tool to modify the deployment of T2000 online.
Deploy the T2000 through the network management system maintenance suite client, including adding an instance, automatically deploying an instance, modifying an instance, starting an instance, stopping an instance, and deleting an instance.
Huawei Confidential

.
Q6:How to Troubleshoot the Inconsistency of the Instance Status In the MSuite Client
Notes:
The client of the network management system maintenance suite refreshes the instance status every 15 seconds. Therefore, the instance status between the client of the network management system maintenance suite and the system monitoring client may be inconsistent in a short time.
Prerequisites
The server of the network management system maintenance suite must be started.
The client and server of the network management system maintenance suite must be communicate with each other normally.
Procedure
On the client of the network management system maintenance suite, click the Instance tab.
Click the shortcut icon to refresh the information on T2000.
Huawei Confidential

.
Q7:How to Troubleshoot the Automatic Logout of the Client of the MSuite ?
Notes:
The client of the network management system maintenance suite is a system based on a single user. To prevent a user from occupying the server system for a long time, the client automatically log out if the user does not perform any operation on the GUI of the client in 15 minutes.
Procedure
In the INFO dialog box, click OK.
Enter the password for logging in to the client of the network management system maintenance suite. The initial password is MSUITE.
Click OK to log in to the client of the network management system maintenance tool again.
Huawei Confidential

.
Q8:How to Troubleshoot the Failure of Starting the Instance In the MSuite Client ?
Notes:
In the case of the initial startup of an instance, the corresponding data table is created. If the instance is interrupted unexpectedly during the startup of the instance, the instance fails to be started.
Procedure
Delete the instance on the client of the network management system maintenance suite.
Add the instance again on the client of the network management system maintenance suite..
Huawei Confidential

.
Q9:Failed to deploy the T2000 on Windows for the first time
Description:
During the Installation procedure, after select the needed sub-system, the program will deploy the system and create the related instance, if it report the failed to deploy.
Procedure:
Step1: start the server of the Network Management System Maintenance Suite tool (MSuite in short), check the process in the task manager of Windows, if there is msserver, it means the server of MSuite tool is starting. If not ,manual start the msserver by running the following C:\HWMSuite\server\msserver.exe , don’t close the dos window.
Step2: Run the following command in the DOS window:
cd C:\HWMSuite\client\bin
mscmd deploymainnms -ip 10.70.77.119 -nmspath %IMAPROOT%\server -nmsversion T2000V200R007C01B02f
Notes: the IP address “10.70.77.119“ is the IP address for T2000 server computer; The version “T2000V200R007C01B02f“ is the version of T2000 server.
Step3:Start the Client of MSuite tool, add the instance manually.
Huawei Confidential

.
Step 1: After the IP address of the MSuite server is changed, the following error occurs when the MSuite client logs in to the server.
Step 2: Click OK and then enter the new IP address and password. The following dialog box is displayed.
Q10: The error is displayed indicating “Log into the server of the MSuite failed” when the MSuite is started?
When the IP address of the MSuite server is changed, if the IP address of the MSuite server that the MSuite client logs in to is not changed manually, the error message is displayed. To solve the problem, do as follows:
Huawei Confidential

.
Q10:The error is displayed indicating “Log into the server of the MSuite failed” when the MSuite is started (conf.)
Step 3: Click OK. The following window is displayed again. Confirm the new IP address.
Step 4: Click OK to synchronize the IP address and the name of the computer where the MSuite server is installed. After synchronization, the following dialog box is displayed.
Step 5: Click OK to log in to the MSuite server.
Huawei Confidential

.
Summary
In this course, we have learned the typical case for T2000V2R7C01
FAQs for Installation
FAQs for Upgrade
Thank You

5-OptiX iManager T2000 V2R7C01 FAQ-20081208-A.ppt

Documents

Transcript of 5-OptiX iManager T2000 V2R7C01 FAQ-20081208-A.ppt