5 – 10 Texas Submersible Turbine Pumps - Pumps! … Series Impeller Type Bowl Diameter...
28
1 SPECIFICATIONS Model Operating Range Best Efficiency Horsepower Discharge Minimum GPM Range Range Connections Well Size 05WALC 15 – 80 50 5 – 20 3", 4" 6" 05WAHC 20 – 100 70 5 – 25 3", 4" 6" 05CLC 50 – 180 110 5 – 30 3", 4" 6" 05CHC 70 – 220 150 5 – 50 3", 4" 6" 05TLC 75 – 220 170 5 – 40 3", 4" 6" 05THC 150 – 300 240 5 – 60 3", 4" 6" 06CLC 100 – 200 160 5 – 40 3", 4" 8" 06CHC 150 – 300 225 5 – 50 3", 4" 8" 06DLC 200 – 450 350 5 – 30 3", 4" 8" 06DHC 300 – 550 425 5 – 30 3", 4" 8" 07WALC 150 – 300 250 7 1 /2 – 60 4", 5", 6" 8" 07WAHC 200 – 350 275 10 – 75 4", 5", 6" 8" 07CLC 250 – 460 350 10 – 100 4", 5", 6" 8" 07CHC 300 – 600 450 15 – 100 4", 5", 6" 8" 07TLC 300 – 650 500 10 – 100 4", 5", 6" 8" 07THC 400 – 800 700 15 – 100 4", 5", 6" 8" 09WALC 250 – 550 400 15 – 100 5". 6", 8" 10" 09WAHC 300 – 600 425 20 – 150 5", 6", 8" 10" 09RCLC 400 – 1200 900 40 – 150 5", 6", 8" 10" 09RCHC 500 – 1400 1000 60 – 150 5", 6", 8" 10" 09TLC 750 – 1700 1250 40 – 150 5", 6", 8" 10" 09THC 800 – 2000 1600 60 – 150 5", 6", 8" 10" 10JLC 700 – 1250 1000 30 – 150 6", 8" 12" 5" – 10" Texas Submersible Turbine Pumps For 6" and larger wells FEATURES ■ Discharge Bowl: Several dis- charge sizes available for NPT. ■ Discharge Bearing: Extra long sealed top bronze bearing insures positive shaft alignment and stabilization for extended life. ■ Intermediate Bowl: Close grained class 30 cast iron. Nonmetallic coatings on 7" and larger pumps for maximum efficiency and abrasion resis- tance. ■ Impellers: Unleaded silicon brass impellers are made of ASTM B584 C87500. Designed for maximum efficiency with wide range hydraulic coverage. ORDER NUMBER CODE Pump Series Impeller Type Bowl Diameter 5TLC00544CTB Impeller Configuration Horsepower Suction Adapter Size Discharge Size Materials of Construction Discharge Type Bearing Type 5 T L C 005 4 4 C T B ■ Upthrust Collar: Designed for extra margin of safety against possible momentary upthrust occurring at start-up. ■ Intermediate Bowl Bear- ings: Reliable long life rubber bearings (optional bronze available). ■ Taperlocks: Accurately machined to insure positive locking of impeller to pump shaft. can be operated continuously without fear of damage to the motor. ■ Franklin Electric Motor: • Corrosion-resistant construction. • Stainless steel splined shaft. • Hermetically sealed windings. • Anti-track self-healing resin system. • Water lubrication. • Filter check valve. • Kingsbury-type thrust bearing. • Pressure equalizing diaphragm. • Sand fighter slinger. • Removable water-bloc lead connector. • UL 778 recognized. ■ Suction Inlet: Contoured for smooth flow entrance. Protected by an oversized stainless steel strainer to prevent entrance of damaging solids. ■ Suction Adapter: Ductile iron for increased strength and positive motor alignment. Open area permits easy access to pump/motor coupling. ■ Pump and Motor Coupling: Large stainless steel coupling accurately matched for perfect alignment, balance and power transmission. ■ Pump Shaft: 100,000 PSI high tensile stainless steel provides strength and excellent corrosion resistance. Ground and polished for smooth bearing surface. ■ Powered for Continuous Operation: All ratings are within the working limits of the motor manufacturer. Pump Goulds Pumps is ISO 9001 Registered.
Transcript of 5 – 10 Texas Submersible Turbine Pumps - Pumps! … Series Impeller Type Bowl Diameter...
1
SPECIFICATIONS
Model Operating Range Best Efficiency Horsepower Discharge MinimumGPM Range Range Connections Well Size
05WALC 15 – 80 50 5 – 20 3", 4" 6"05WAHC 20 – 100 70 5 – 25 3", 4" 6"
05CLC 50 – 180 110 5 – 30 3", 4" 6"05CHC 70 – 220 150 5 – 50 3", 4" 6"05TLC 75 – 220 170 5 – 40 3", 4" 6"05THC 150 – 300 240 5 – 60 3", 4" 6"06CLC 100 – 200 160 5 – 40 3", 4" 8"06CHC 150 – 300 225 5 – 50 3", 4" 8"06DLC 200 – 450 350 5 – 30 3", 4" 8"06DHC 300 – 550 425 5 – 30 3", 4" 8"
07WALC 150 – 300 250 71⁄2 – 60 4", 5", 6" 8"07WAHC 200 – 350 275 10 – 75 4", 5", 6" 8"
07CLC 250 – 460 350 10 – 100 4", 5", 6" 8"07CHC 300 – 600 450 15 – 100 4", 5", 6" 8"07TLC 300 – 650 500 10 – 100 4", 5", 6" 8"07THC 400 – 800 700 15 – 100 4", 5", 6" 8"
09WALC 250 – 550 400 15 – 100 5". 6", 8" 10"09WAHC 300 – 600 425 20 – 150 5", 6", 8" 10"09RCLC 400 – 1200 900 40 – 150 5", 6", 8" 10"09RCHC 500 – 1400 1000 60 – 150 5", 6", 8" 10"09TLC 750 – 1700 1250 40 – 150 5", 6", 8" 10"09THC 800 – 2000 1600 60 – 150 5", 6", 8" 10"10JLC 700 – 1250 1000 30 – 150 6", 8" 12"
5" – 10" TexasSubmersibleTurbine Pumps
For 6" and larger wells
FEATURES
■ Discharge Bowl: Several dis-charge sizes available for NPT.■ Discharge Bearing: Extralong sealed top bronze bearinginsures positive shaft alignmentand stabilization for extendedlife.■ Intermediate Bowl: Closegrained class 30 cast iron.Nonmetallic coatings on 7"and larger pumps for maximumefficiency and abrasion resis-tance.■ Impellers: Unleaded siliconbrass impellers are made ofASTM B584 C87500. Designedfor maximum efficiency withwide range hydraulic coverage.
ORDER NUMBER CODE
Pump Series
ImpellerType
BowlDiameter
5TLC00544CTB
ImpellerConfiguration
Horsepower SuctionAdapter Size
Discharge Size
Materials ofConstruction
Discharge Type
Bearing Type
5 T L C 005 4 4 C T B
■ Upthrust Collar: Designedfor extra margin of safetyagainst possible momentaryupthrust occurring atstart-up.■ Intermediate Bowl Bear-ings: Reliable long life rubberbearings (optional bronzeavailable).■ Taperlocks: Accuratelymachined to insure positivelocking of impeller to pumpshaft.
can be operated continuouslywithout fear of damage to themotor.■ Franklin Electric Motor:• Corrosion-resistant
construction.• Stainless steel splined shaft.• Hermetically sealed
windings.• Anti-track self-healing
resin system.• Water lubrication.• Filter check valve.• Kingsbury-type thrust
bearing.• Pressure equalizing
diaphragm.• Sand fighter slinger.• Removable water-bloc lead
connector.• UL 778 recognized.
■ Suction Inlet: Contouredfor smooth flow entrance.Protected by an oversizedstainless steel strainer toprevent entrance of damagingsolids.■ Suction Adapter: Ductileiron for increased strength andpositive motor alignment. Openarea permits easy access topump/motor coupling.■ Pump and MotorCoupling: Large stainless steelcoupling accurately matched forperfect alignment, balance andpower transmission.■ Pump Shaft: 100,000 PSIhigh tensile stainless steelprovides strength and excellentcorrosion resistance. Groundand polished for smooth bearingsurface.■ Powered for ContinuousOperation: All ratings arewithin the working limits of themotor manufacturer. Pump
Goulds Pumps is ISO 9001 Registered.
2
Model 5WALC 50 GPM
MODEL: 5WALCSIZE: 541⁄64”RPM: 3450
0 25 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
1200
TOTA
L D
YNA
MIC
HEA
D
0 m3/hr15
20
40
60
% EFF120
150
200
250
300
METERS
900
700
500
300
100
15 75
105
1100
80706560555045403530105 20
350
20 FT
1 GPM
110
100
70
80
90
50
30
10
EFF%
5WALC005
5WALC007
5WALC010
5WALC015
5WALC020
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 505WALC00544CTB 29.3 8905WALC00564CTB 31.4 97
7.5 805WALC00744CTB 41.3 12505WALC00764CTB 43.4 133
10 10 05WALC01064CTB 51.4 15715 15 05WALC01564CTB 71.4 21720 20 05WALC02064CTB 91.4 277
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
3
MODEL: 5WAHCSIZE: 541⁄64”RPM: 3450
0 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
1200
TOTA
L D
YNA
MIC
HEA
D
0 m3/hr20
20
40
60
% EFF120
150
200
250
300
METERS
900
700
500
300
100
105
1100
100706050403010 20
350
110
100
70
80
90
50
30
10
80 90
15
20 FT
5 GPM
EFF%
5WAHC025
5WAHC020
5WAHC015
5WAHC010
5WAHC007
5WAHC005
Model 5WAHC 70 GPM
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 405WAHC00544CTB 25.3 7705WAHC00564CTB 27.4 85
7.5 605WAHC00744CTB 33.3 10105WAHC00764CTB 35.4 109
10 8 05WAHC01064CTB 43.4 13315 12 05WAHC01564CTB 59.4 18120 16 05WAHC02064CTB 75.4 22925 19 05WAHC02564CTB 87.4 265
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
4
Model 5CLC 110 GPM
MODEL: 5CLCSIZE: 541/64" BowlRPM: 3450
0 50 150 200 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
1100
TOTA
L D
YNA
MIC
HEA
D
100
0 20 m3/hr4010 30 45
20
40
60
% EFF80
150
200
250
300
METERS
900
700
500
300
100
25 75 125 175
3525155
25 FT
5 GPM5CLC030
5CLC010
5CLC015
5CLC020
5CLC025
5CLC007
5CLC005
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 305CLC00544CTB 25.2 7005CLC00564CTB 27.5 75
7.5 405CLC00744CTB 29.8 8305CLC00764CTB 32.1 88
10 6 05CLC01064CTB 41.4 11415 9 05CLC01564CTB 55.3 15320 12 05CLC02064CTB 69.2 19225 15 05CLC02564CTB 83.1 23130 17 05CLC03064CTB 92.3 257
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
5
MODEL: 5CHCSIZE: 541⁄64" BowlRPM: 3450
0 50 150 250 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
1200
TOTA
L D
YNA
MIC
HEA
D
100
0 20 m3/h4010 30 50
20
40
60
% EFF80
150
200
250
300
325
METERS
1100
900
700
500
300
100
25 75 125 175
3525155
200 225
45 55
25 FT
5 GPM5CHC050
5CHC040
5CHC030
5CHC025
5CHC020
5CHC015
5CHC010
5CHC007
5CHC005
EFF%
Model 5CHC 150 GPM
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 205CHC00544CTB 20.2 5705CHC00564CTB 22.8 62
7.5 305CHC00744CTB 25.2 7005CHC00764CTB 27.5 75
10 4 05CHC01064CTB 32.1 8815 6 05CHC01564CTB 41.4 11420 8 05CHC02064CTB 50.7 14025 10 05CHC02564CTB 59.9 16630 12 05CHC03064CTB 69.2 19240 16 05CHC04064CTB 87.7 24450 19 05CHC05064CTB 101.6 283
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
6
Model 5TLC 170 GPM
0 50 150 200 250 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
1200
TOTA
L D
YNA
MIC
HEA
D
100
MODEL: 5TLCSIZE: 541/64" BowlRPM: 3450
25 75 125 175 225
100
300
500
700
900
1100
20 FT
5 GPM
0 20 60 m3/hr4010 30 50
20
40
60
% EFF80
150
200
250
300
350
METERS
5TLC040
5TLC030
5TLC025
5TLC020
5TLC015
5TLC010
5TLC005
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 205TLC00544CTB 20.9 5705TLC00564CTB 23.3 62
10 5 05TLC01064CTB 37.6 10115 8 05TLC01564CTB 52.0 14020 11 05TLC02064CTB 66.5 17925 13 05TLC02564CTB 76.0 20530 16 05TLC03064CTB 90.6 24440 20 05TLC04064CTB 109.8 296
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
7
Model 5THC 240 GPM
MODEL: 5THCSIZE: 541/64" BowlRPM: 3450
0 100 GPM0
50
100
FEET
200
400
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
200 300
0 m3/hr30
20
40
60
% EFF250
METERS
7040
300
350
200
80
1200
1000
800
50 150 250
60502010
150
25 75 125 175 225 275
100
300
500
700
900
1100
25 FT
5 GPM5THC060
5THC050
5THC040
5THC030
5THC025
5THC020
5THC015
5THC010
5THC005
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 205THC00544CTB 20.9 6005THC00564CTB 23.3 62
10 3 05THC01064CTB 28.0 7515 5 05THC01564CTB 37.6 10120 7 05THC02064CTB 47.3 12725 8 05THC02564CTB 52.0 15330 10 05THC03064CTB 61.7 16640 13 05THC04064CTB 76.0 21850 16 05THC05064CTB 90.6 25760 19 05THC06064CTB 105.0 296
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BBronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
541⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
8
Model 6CLC 160 GPM
MODEL: 6CLCSIZE: 619/64" BowlRPM: 3450
0 50 125 175 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
TOTA
L D
YNA
MIC
HEA
D
25 75 100 150
0 15 35 m3/hr2510 20 30
20
40
60
% EFF80
150
200
250
300
METERS
5
1200
350
100
300
500
700
900
1100
200
40 45 50
25 FT
5 GPM
25
75
125
175
225
275
3256CLC040
6CLC030
6CLC025
6CLC020
6CLC015
6CLC010
6CLC007
6CLC005
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 206CLC00544CTS 22.4 7106CLC00564CTS 24.6 72
7.5 306CLC00744CTS 27.5 8806CLC00764CTS 29.7 90
10 4 06CLC01064CTS 34.8 10615 5 06CLC01564CTS 40.0 14020 7 06CLC02064CTS 50.2 17425 9 06CLC02564CTS 60.5 20830 10 06CLC03064CTS 65.6 24240 12 06CLC04064CTS 75.8 274
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
619⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
33⁄4"(4" MTR.)
53⁄8"(6" MTR.)
9
Model 6CHC 225 GPM
MODEL: 6CHCSIZE: 619⁄64"RPM: 3450
0 50 GPM0
50
100
FEET
200
400
600
00
CAPACITY
800
TOTA
L D
YNA
MIC
HEA
D
100 150
0 m3/hr10
20
40
60
% EFF
150
200
250
METERS
900
100
300
500
700
200
20
250
80
60504030
25 75 125 175 225 275
50
150
250
350
450
550
650
750
850
EFF%
950
25 FT
5 GPM
6CHC005
6CHC010
6CHC015
6CHC020
6CHC025
6CHC030
6CHC040
6CHC050
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 106CHC00544CTS 17.3 5406CHC00564CTS 19.4 55
10 2 06CHC01064CTS 24.6 7215 3 06CHC01564CTS 29.7 8920 4 06CHC02064CTS 34.8 10625 5 06CHC02564CTS 40.0 12330 6 06CHC03064CTS 45.0 14040 8 06CHC04064CTS 55.4 17450 10 06CHC05064CTS 65.6 208
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
619⁄64"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
10
Model 6DLC 350 GPM
0 GPM0
50
100
FEET
200
400
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr20
20
40
60
% EFF
200
METERS
100
300
500
200
8040
80
300 400
100
150
60
600
MODEL: 6DLCSIZE: 515/16" BowlRPM: 3450
20 FT
10 GPM
6DLC005
6DLC0076DLC010
6DLC015
6DLC020
6DLC025
6DLC030
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
5 106DLC00544CTS 14.2 3506DLC00564CTS 19.0 55
7.5 206DLC00744CTS 19.7 5106DLC00764CTS 24.5 71
10 2 06DLC01064CTS 24.5 7115 3 06DLC01564CTS 30.0 8920 4 06DLC02064CTS 35.5 10125 5 06DLC02564CTS 41.0 12530 6 06DLC03064CTS 46.5 143
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTMA536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
MATERIALS OF CONSTRUCTION
................................................................................................................................................................
........................................
........................................
........................................
4" NPT DISCHARGECONNECTION
W.E.
515⁄16"Effectivediameter
with cableguard
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
11
Model 6DHC 425 GPM
MODEL: 6DHCSIZE: 515/16" BowlRPM: 3450
0 GPM0
60
100
FEET
200
400
450
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr20
20
40
60
% EFF
120
METERS
100
300
200
8040
80
300 400 500
120100
20
80
60
10 FT
10 GPM
50
150
250
350
40
6DHC005
6DHC010
6DHC015
6DHC020
6DHC025
6DHC030
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP StagesW.E. Order W.E. W.E.
Number Length Wt. (lbs.)
5 106DHC00544CTS 14.2 3506DHC00564CTS 19.0 55
10 2 06DHC01064CTS 24.5 7115 3 06DHC01564CTS 30.0 8920 4 06DHC02064CTS 35.5 10125 5 06DHC02564CTS 41.0 12530 6 06DHC03064CTS 46.5 143
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
515⁄16"Effectivediameter
with cableguard
4" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
33⁄4"(4" MTR.)
12
Model 7WALC 250 GPM
MODEL: 7WALCSIZE: 71/2" BowlRPM: 3450
0 100 GPM0
50
100
FEET
200
400
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
200 300
0 m3/hr30
20
40
60
% EFF250
METERS
7040
300
350
200
80
1200
1000
800
50 150 250
60502010
150
25 75 125 175 225 275
100
300
500
700
900
1100
25 FT
5 GPM7WALC060
7WALC050
7WALC040
7WALC030
7WALC025
7WALC020
7WALC015
7WALC007
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
7.5 1 07WALC00766ATS 22.0 6815 2 07WALC01566ATS 27.5 9820 3 07WALC02066ATS 33.0 12825 4 07WALC02566ATS 38.5 15830 5 07WALC03066ATS 44.0 18840 6 07WALC04066ATS 49.5 21850 7 07WALC05066ATS 55.0 24860 8 07WALC06066ATS 60.5 278
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
71⁄2"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
13
Model 7WAHC 275 GPM
MODEL: 7WAHCSIZE: 71/2" BowlRPM: 3450
0 100 GPM0
50
100
FEET
200
400
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
200 325
0 m3/hr30
20
40
60
% EFF
250
METERS
40
300
350
200
80
1200
1000
800
50 150 250
60502010
150
25 75 125 175 225 275
100
300
500
700
900
1100
300
70
25 FT
5 GPM
120
100
7WAHC010
7WAHC015
7WAHC020
7WAHC025
7WAHC030
7WAHC040
7WAHC050
7WAHC060
7WAHC075
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
10 1 07WAHC01066ATS 22.0 6815 2 07WAHC01566ATS 27.5 9820 2 07WAHC02066ATS 27.5 9825 3 07WAHC02566ATS 33.0 12830 3 07WAHC03066ATS 33.0 12840 4 07WAHC04066ATS 38.5 15850 5 07WAHC05066ATS 44.0 18860 7 07WAHC06066ATS 55.0 24875 8 07WAHC07586ATS 60.5 290
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
71⁄2"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
14
Model 7CLC 350 GPM
MODEL: 7CLCSIZE: 71⁄2"RPM: 3450
0 50 GPM0
50
100
FEET
200
400
600
1000
00
CAPACITY
800
TOTA
L D
YNA
MIC
HEA
D
100 150
0 m3/hr20
20
40
60
% EFF
80
150
200
250
300
METERS1200
350
100
300
500
700
900
1100
200
40 100
50 FT
10 GPM
250 300 350 400 450
100
60 80
30
50
70
90
10
EFF%
7CLC040
7CLC030
7CLC020
7CLC010
7CLC050
7CLC060
7CLC075
7CLC100
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
10 1 07CLC01066ATS 22.9 7520 2 07CLC02066ATS 29.3 10330 3 07CLC03066ATS 35.6 13140 4 07CLC04066ATS 42.0 15950 5 07CLC05066ATS 48.4 18760 6 07CLC06066ATS 54.8 21575 7 07CLC07586ATS 62.8 255
100 9 07CLC10086ATS 75.6 311
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
71⁄2"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
15
Model 7CHC 450 GPM
MODEL: 7CHCSIZE: 71⁄2"RPM: 3450
0 100 GPM0
50
100
FEET
200
400
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
200 300
0 m3/hr
20
40
60
% EFF
150
METERS900
100
300
500
400 500
90
1005025
50 150 250 350 450 550
80
700
800
200
250
600
12575
10
30
50
70
EFF%50 FT
25 GPM
7CHC030
7CHC040
7CHC060
7CHC075
7CHC100
7CHC015
7CHC050
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
15 1 07CHC01566ATS 22.9 7530 2 07CHC03066ATS 29.3 10340 3 07CHC04066ATS 35.6 13150 4 07CHC05066ATS60 4 07CHC06066ATS
42.0 159
75 5 07CHC07586ATS 50.0 199100 6 07CHC10086ATS 56.5 227
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
71⁄2"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
16
Model 7TLC 500 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
400
800
200
100
80
300
140
350
20
1000
1200
600500400
120806040
300
250
200
150
MODEL: 7TLCSIZE: 71/2" BowlRPM: 3450
50 FT
25 GPM
7TLC010
7TLC020
7TLC030
7TLC040
7TLC050
7TLC060
7TLC075
7TLC100
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
10 1 07TLC01066BTS 23.6 7820 2 07TLC02066BTS 30.7 10930 3 07TLC03066BTS 37.8 14040 4 07TLC04066BTS 44.7 17150 5 07TLC05066BTS 52.0 20260 6 07TLC06066BTS 59.0 23375 7 07TLC07586BTS 67.8 276
100 9 07TLC10086BTS 81.8 338
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
MATERIALS OF CONSTRUCTION6" NPT DISCHARGECONNECTION
71⁄2"Effectivediameter
with cableguard
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
................................................................................................................................................................
........................................
........................................
........................................
W.E.
17
Model 7THC 700 GPM
MODEL: 7THCSIZE: 71/2" BowlRPM: 3450
0 GPM0
50
100
FEET
200
400
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
100
300
500
200
100
80
300 800
150
150
50
600
700
25 FT
25 GPM
700600500400
7THC100
7THC075
7THC060
7THC050
7THC030
7THC015
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
15 1 07THC01566BTS 23.6 7830 2 07THC03066BTS 30.7 10950 3 07THC05066BTS 37.8 14060 4 07THC06066BTS 44.7 17175 5 07THC07586BTS 53.6 214
100 6 07THC10086BTS 60.7 245
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
71⁄2"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
18
Model 9WALC 400 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
400
800
200
100
80
300
140
350
20
1000
1200
600500400
120806040
300
250
200
150
MODEL: 9WALCSIZE: 913/16" BowlRPM: 3450
50 FT
25 GPM
100
9WALC015
9WALC020
9WALC025
9WALC030
9WALC040
9WALC050
9WALC060
9WALC075
9WALC100
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
15 1 09WALC01566ATS 26.3 15820 2 09WALC02066ATS 32.9 21625 2 09WALC02566ATS 32.9 21630 2 09WALC03066ATS 32.9 21640 3 09WALC04066ATS 39.5 27450 3 09WALC05066ATS 39.5 27460 4 09WALC06066ATS 46.0 33275 5 09WALC07586ATS 51.0 402100 6 09WALC10086ATS 57.5 460
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
19
Model 9WAHC 425 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
400
800
200
100
80
300
140
350
20
1000
1200
600500400
120806040
300
250
200
150
MODEL: 9WAHCSIZE: 913/16" BowlRPM: 3450
100
700
50 FT
25 GPM
160
9WAHC020
9WAHC030
9WAHC040
9WAHC050
9WAHC060
9WAHC075
9WAHC100
9WAHC125
9WAHC150
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
20 1 09WAHC02066ATS 26.3 15830 2 09WAHC03066ATS 32.9 21640 2 09WAHC04066ATS 32.9 21650 3 09WAHC05066ATS 39.5 27460 3 09WAHC06066ATS 39.5 27475 4 09WAHC07586ATS 44.3 344
100 4 09WAHC10086ATS 44.3 344125 5 09WAHC12586ATS 50.9 402150 6 09WAHC15086ATS 57.5 460
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
20
Model 9RCLC 900 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
400
900
200
100
80
300
26020
600500400
240806040
300
250
200
150
MODEL: 9RCLCSIZE: 913/16" BowlRPM: 3450
700
280
800
700
500
300
100
800 900 1000 1100 1200
220200180160140120
50 FT
50 GPM 90
10
30
50
70
9RCLC060
9RCLC075
9RCLC040
9RCLC100
9RCLC125
9RCLC150
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
40 1 09RCLC04066ATS 28.0 19460 2 09RCLC06066ATS 36.6 25875 2 09RCLC07586ATS 34.8 270100 3 09RCLC10086ATS 43.2 334125 3 09RCLC12586ATS 43.2 334150 4 09RCLC15086ATS 51.8 398
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
21
Model 9RCHC 1000 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
100
0 m3/hr
20
40
60
% EFF
METERS
400
200
100
80
300
26020
600500400
240806040
200
150
MODEL: 9RCHCSIZE: 913/16" BowlRPM: 3450
100
700
280
700
500
300
100
800 900 1000 1100 1200
220200180160140120
1300 1400
300 320
25 FT
50 GPM
9RCHC060
9RCHC100
9RCHC150
EFF%
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
60 1 09RCHC06066ATS 28.0 194100 2 09RCHC10086ATS 34.8 270150 3 09RCHC15086ATS 43.5 334
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
22
Model 9TLC 1250 GPM
0 GPM0
50
100
FEET
200
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
0 m3/hr
20
40
60
% EFFMETERS
400
250
100
90
500
50
200
150
MODEL: 9TLCSIZE: 913/16" BowlRPM: 3450
750
900
500
300
100
1000 1250
200
1500 1750
300 400
800
700
150 250 350
80
70
50
30
10
25 FT
62.5 GPM
9TLC040
9TLC060
9TLC075
9TLC100
9TLC125
9TLC150
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
40 1 09TLC04066ATS 28.9 20060 2 09TLC06066ATS 38.1 27075 2 09TLC07586ATS 36.3 282100 3 09TLC10086ATS 45.5 352125 3 09TLC12586ATS 45.5 352150 4 09TLC15086ATS 57.8 422
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
23
Model 9THC 1600 GPM
0 GPM0
50
100
FEET
200
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
0 m3/hr
20
40
60
% EFFMETERS
400
200
100
100
400
50
150 MODEL: 9THCSIZE: 913⁄16"RPM: 3450
600
500
300
100
1000 1200
200
1400 1600
300 450150 250 350
80
70
50
30
1050
150
250
350
450
800 1800 2000
90
400
25 FT
100 GPM
EFF%
9THC050
9THC060
9THC100
9THC125
9THC150
– – – – –Recommended operating rangeAlternate pump selection is available
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
50 1 09THC05066ATS 28.9 20060 1 09THC06066ATS 28.9 200
100 2 09THC10086ATS 36.3 282125 2 09THC12586ATS 36.3 282150 3 09THC15086ATS 45.5 352
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:•Order motors separately.•For intermediate horsepower pumps consult factory.•Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.•Please specify all options changes in W.E. order number.
MATERIALS OF CONSTRUCTION
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
................................................................................................................................................................
........................................
........................................
........................................
913⁄16"Effectivediameter
with cableguard
6" NPT DISCHARGECONNECTION
W.E.
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
24
Model 10JLC 1000 GPM
MODEL: 10JLCSIZE: 10" BowlRPM: 3450
0 GPM0
50
100
FEET
200
400
600
00
CAPACITY
TOTA
L D
YNA
MIC
HEA
D
200
0 m3/hr50
20
40
60
% EFF150
METERS
100
300
500
400
150100
100
600 800 1000 1200
250200
900
800
700
100 300 500 700 900 1100
250
200
50
150
250
350
450
550
650
750
850
25 FT
50 GPM
80
10JLC150
10JLC125
10JLC100
10JLC060
10JLC030
EFF%
Recommended operating rangeAlternate pump selection is available– – – – –
DIMENSIONS AND WEIGHTS
HP Stages W.E. Order W.E. W.E.Number Length Wt. (lbs.)
30 1 10JLC03066BTS 28.0 18760 2 10JLC06066BTS 36.4 249100 3 10JLC10086BTS 43.0 312125 4 10JLC12586BTS 51.3 372150 5 10JLC15086BTS 59.8 432
(All dimensions in inches and weights in lbs. Do not use for construction purposes.)
PLEASE NOTE:• Order motors separately.• For intermediate horsepower pumps consult factory.• Solid line is recommended operating range. The dotted
line (– – – –) signifies an alternate pump selection is available.• Please specify all options changes in W.E. order number.
Part Name MaterialShaft ASTM A582 TYPE 416Coupling ASTM A582 S41600 CDSuction Adapter Ductile Iron ASTM A536Discharge Bowl ASTM A48 CL 30BRubber Bearings RUBBEROptional Bronze Bearings ASTM B584Discharge Bowl Bearing ASTM B584Taperlocks ASTM A108 GR 101BBowl ASTM A48 CL 30BUpthrust Collar PolyethyleneImpeller ASTM B584Fasteners SAEJ429 GR 8Cable Guard ASTM A240 S 30400Suction Strainer ASTM A240 S 30400
MATERIALS OF CONSTRUCTION
................................................................................................................................................................
........................................
........................................
........................................
6" NPT DISCHARGECONNECTION
W.E.
10"Effectivediameter
with cableguard
53⁄8"(6" MTR.)
71⁄2"(8" MTR.)
25
4 inchthreewirewith
run cap
6 inchthreewire
.9-1.5M3.0-4.9S
.68-1.0M1.8-2.8S
.55-.68M1.3-1.6S
.36-.50M.92-1.2S
.27-.33M.80-.99S
.17-.22M.68-.93S
Type
FranklinMotorModelPrefix
GouldsModel
Number
(1) Main winding – black to yellowStart winding – red to yellow
(2) Y = Yellow lead, line ampsB = Black lead, main winding ampsR = Red lead, start or auxiliary winding amps
Single Phase – 60 Hz Motor Specifications
➀ MC = Deluxe FE control box withmagnetic contactor
➁ Includes Lightning Arrestor
For Additional Motor Data Call Franklin Electric at 1-800-348-2420.
Rated Input Maximum Line to Line Locked KVA Inverse Dual Ele-(S.F. Load) Rotor Time ment Time
HP Volts Hz S.F. Amps Watts Amps Watts Res. Amps Code Breaker Delay Fuse
S09978 234306 3 200 60 1.15 11.3 2980 12.4 3420 1.3-1.7 71 K 30 20S09970 234316 3 230 60 1.15 9.8 2980 10.8 3420 1.8-2.2 62 K 25 20S09975 234326 3 460 60 1.15 4.9 2980 5.4 3420 7.0-8.7 31 K 15 10S09979 234336 3 575 60 1.15 3.9 2980 4.3 3420 10.9-13.6 25 K 15 8S10978 234307 5 200 60 1.15 18.4 5050 20.4 5810 .70-.94 122 K 50 35S10970 234317 5 230 60 1.15 16.0 5050 17.7 5810 .93-1.2 106 K 40 30S10975 234327 5 460 60 1.15 8.0 5050 8.9 5810 3.6-4.4 53 K 20 15S10979 234337 5 575 60 1.15 6.4 5050 7.1 5810 5.6-6.9 43 K 20 15
S119784 234308 71⁄2 200 60 1.15 27.1 7360 29.9 8450 .46-.57 188 K 70 50S119704 234318 71⁄2 230 60 1.15 23.6 7360 26.0 8450 .61-.75 164 K 60 45S119754 234328 71⁄2 460 60 1.15 11.8 7360 13.0 8450 2.4-3.4 82 K 30 25S119794 234338 71⁄2 575 60 1.15 9.4 7360 10.4 8450 3.5-5.1 66 K 25 20S109786 236650 5 200 60 1.15 17.5 4700 19.1 5400 .68-.84 99 H 45 35S10971 236600 5 230 60 1.15 15.0 4700 16.6 5400 .88-1.09 86 H 40 30S10972 236610 5 460 60 1.15 7.5 4700 8.8 5400 3.5-4.0 43 H 20 15
S109796 236620 5 575 60 1.15 6.0 4700 6.6 5400 5.9-7.2 34 H 15 15S11978 236651 71⁄2 200 60 1.15 25.1 7000 28.3 8000 .39-.48 150 H 70 45S11971 236601 71⁄2 230 60 1.15 21.8 7000 24.6 8000 .57-.71 130 H 60 40S11972 236611 71⁄2 460 60 1.15 10.9 7000 12.3 8000 2.2-2.7 65 H 30 20S11979 236621 71⁄2 575 60 1.15 8.7 7000 9.8 8000 3.6-4.4 52 H 25 20S12978 236652 10 200 60 1.15 32.7 9400 37 10800 .33-.42 198 H 90 60S12971 236602 10 230 60 1.15 28.4 9400 32.2 10800 .44-.55 172 H 80 60S12972 236612 10 460 60 1.15 14.2 9400 16.1 10800 1.7-2.2 86 H 40 30S12979 236622 10 575 60 1.15 11.4 9400 12.9 10800 2.8-3.5 69 H 30 25S13978 236653 15 200 60 1.15 47.8 13700 54.5 15800 .22-.27 306 H 125 90S13971 236603 15 230 60 1.15 41.6 13700 47.4 15800 .27-.33 266 H 110 80S13972 236613 15 460 60 1.15 20.8 13700 23.7 15800 1.1-1.3 133 H 60 40S13979 236623 15 575 60 1.15 16.7 13700 19 15800 1.7-2.1 106 H 45 30S14978 236654 20 200 60 1.15 61.9 18100 69.7 20900 .14-.17 416 J 175 110
6 inch3450RPM
FranklinMotorModelPrefix
GouldsModel
NumberType
4 inch3450RPM
Rated Input Maximum (1) Locked KVA Dual(S.F. Load) Line to Line Rotor Inverse Element Single
(2) (2) Res. Time Time Phase
HP Volts Hz S.F. Amps Watts Amps Watts M = Main Amps Code Breaker Delay Control
S = Start Fuse Box
Y14.0 Y17.0 00094S09940 224302 3 230 60 1.15 B12.2 3150 B14.5 3650 82.0 G 45 20 or
R4.7 R4.5 ➀ 00094MCY23.0 Y27.5 00104
S10940 224303 5 230 60 1.15 B15.9 5100 B19.1 5900 121.0 F 60 45 orR11.0 R10.8 ➀ 00104MCY23.0 Y27.5 00104
S10941 226110 5 230 60 1.15 B14.3 5000 B17.4 5700 99.0 E 60 45 orR10.8 R10.5 ➀ 00104MCY36.5 Y42.1 00124
S11970 226111 71⁄2 230 60 1.15 B34.4 7300 B40.5 8800 165.0 F 100 45 orR5.5 R5.4 ➀➂ 00124MCY44.0 Y51.0 00134
S12970 226112 10 230 60 1.15 B39.5 9800 B47.5 11300 204.0 E 150 60 orR9.3 R8.9 ➀➁ 00134MCY62.0 Y75.0
S13970 226113 15 230 60 1.15 B52.0 13900 B62.5 16200 303.0 E 200 80 ➀➁ 00144MCR17.5 R16.9
Three Phase – 60 Hz Motor Specifications
26
Rated Input Maximum Line to Line Locked KVA Inverse Dual Ele-(S.F. Load) Rotor Time ment Time
HP Volts Hz S.F. Amps Watts Amps Watts Res. Amps Code Breaker Delay Fuse
S14971 236604 20 230 60 1.15 53.8 18100 60.6 20900 .20-.25 362 J 150 100S14972 236614 20 460 60 1.15 26.9 18100 30.3 20900 .76-.94 181 J 70 50S14979 236624 20 575 60 1.15 21.5 18100 24.4 20900 1.2-1.5 145 J 60 40S15978 236655 25 200 60 1.15 77.1 22500 86.3 25700 .11-.14 552 J 200 150S15971 236605 25 230 60 1.15 67 22500 75 25700 .15-.19 480 J 175 125S15972 236615 25 460 60 1.15 33.5 22500 37.5 25700 .59-.73 240 J 90 60S15979 236625 25 575 60 1.15 26.8 22500 30 25700 1.0-1.3 192 J 70 50S16978 236656 30 200 60 1.15 90.9 26900 104 31100 .10-.12 653 J 250 175S16971 236606 30 230 60 1.15 79 26900 90.4 31100 .12-.15 568 J 225 150S16972 236616 30 460 60 1.15 39.5 26900 45.2 31100 .48-.60 284 J 110 80S16979 236626 30 575 60 1.15 31.6 26900 36.2 31100 .78-.95 227 J 90 60S17972 236617 40 460 60 1.15 53.5 35600 62 42400 .32-.40 397 J 150 100S17979 236627 40 575 60 1.15 42.8 35600 49.6 42400 .53-.59 318 J 110 80S18972 236618 50 460 60 1.15 67.7 45100 77 52200 .25-.32 414 H 175 125S18979 236628 50 575 60 1.15 54.2 45100 61.6 52200 .39-.48 331 H 150 100S19972 236619 60 460 60 1.15 80.5 53500 91 61700 .22-.27 518 H 225 150S19979 236629 60 575 60 1.15 64.4 53500 72.8 61700 .35-.39 414 H 175 125S19982 239600 40 460 60 1.15 53 35000 60 40000 .247-.303 396 J 150 100S19989 239610 40 575 60 1.15 42 35000 48 40000 .399-.487 317 J 110 80S20982 239601 50 460 60 1.15 64 43000 73 49000 .181-.221 542 K 175 125S20989 239611 50 575 60 1.15 51 43000 59 49000 .280-.342 434 K 150 90S21982 239602 60 460 60 1.15 76 52000 86 60000 .142-.174 658 K 200 150S21989 239612 60 575 60 1.15 61 52000 69 60000 .227-.277 526 K 175 110S22982 239603 75 460 60 1.15 94 64000 107 73500 .106-.130 864 L 250 175S22989 239613 75 575 60 1.15 76 64000 86 73500 .169-.207 691 L 200 150S23982 239604 100 460 60 1.15 126 85000 142 97500 .073-.089 1211 L 350 225S23989 239614 100 575 60 1.15 101 85000 114 97500 .110-.134 969 L 300 200S24982 239105 125 460 60 1.15 167 109000 188 125000 .055-.067 1318 K 450 300S24989 239115 125 575 60 1.15 134 109000 151 125000 .087-.106 1054 K 350 250S25982 239106 150 460 60 1.15 194 128000 219 146000 .042-.051 1620 K 500 350S25989 239116 150 575 60 1.15 155 128000 176 146000 .067-.082 1296 K 400 300S26982 239107 175 460 60 1.15 219 150000 249 173000 .042-.052 1645 J 600 400S26989 239117 175 575 60 1.15 175 150000 200 173000 .063-.077 1316 J 450 350S27982 239108 200 460 60 1.15 246 169000 282 194000 .036-.044 1875 J 700 450S27989 239118 200 575 60 1.15 197 169000 226 194000 .057-.070 1500 J 500 350
NOTES:Model numbers are three lead motors. Six lead motors with different model numbers have the same running performance,but when wye connected for starting have locked rotor amps 33% of the values shown.For additional motor data call Franklin Electric at 1-800-348-2420.
6 inch3450RPM
FranklinMotorModelPrefix
GouldsModel
NumberType
8 inch3525RPM
Three Phase – 60 Hz Motor Specifications
Well AccessoriesCheck Valves – Goulds Pumps Ductile Iron
Size (In.) Model No. Valve O.D. Min. Casing Weight (lbs.)3 CV03FF 47⁄16” 5” 114 CV04FF 51⁄4” 6” 205 CV05FF 65⁄8” 8” 356 CV06FF 75⁄8” 10” 428 CV08FF 97⁄8” 12” 63
Female x Female – NPTBreak-off tube available.
Check Valves – 80 DI Flomatic Ductile IronSize (In.) Model No. Valve O.D. Min. Casing Weight (lbs.)
2 FCV2FFDI 3” 4” 53 FCV3FFDI 45⁄8” 5” 104 FCV4FFDI 53⁄4” 6” 195 FCV5FFDI 63⁄4” 8” 486 FCV6FFDI 8” 10” 638 FCV8FFDI 95⁄8” 12” 9210 FCV10FFDIX 121⁄8” 14” 148
Female x Female – NPTBreak-off tube available.
Accessories Items Available – Contact FactoryWell Heads Draw Down GaugesColumn Pipe Sub Motor ShroudsPump Control Panels Well ElevatorsSubtrol Panels Well Bailing ToolsCable Well BrushesSplice Connectors Well Fishing ToolsPressure Gauges Custom Well Accessories
27
Furnas Starters and HeatersFURNAS Class 14
Inverse Dual Ele-Motor
HP VoltsClass 16 with ESP100
Time ment TimeSize Order Heaters Order Breaker Delay Fuse
Number Number200 16AD K54 CSED 30 20
3230 16AG K52 CSEA 25 20460 16AH K37 CSDC 15 10575 16AE K33 CSDE 15 8200 16AD K61 DSFD 50 35
4"5
230 16AG K60 DSFA 40 303Ø 460 16AH K49 CSDC 20 15
575 16AE K41 CSDE 20 15200 16CD K69 DSFD 70 50
71⁄2230 16BG K64 DSFA 60 45460 16AH K54 DSEC 30 25575 16AE K52 DSEE 25 20200 16AD K61 DSFD 45 35
5230 16AG K58 DSFA 40 30460 16AH K49 CSDC 20 15575 16AE K39 CSDE 15 15200 16BD K67 DSFD 70 45
71⁄2230 16BG K64 DSFA 60 40460 16AH K54 DSEC 30 20575 16AE K50 DSEE 25 20
6" 200 16CD K72 ESGD 90 603Ø
10230 16CG K70 ESGA 80 60460 16AH K57 DSEC 40 30575 16AE K54 DSEE 30 25200 16ED K75 GSJD 125 90
15230 16DG K73 FSHA 110 80460 16BH K63 ESFC 60 40575 16BE K61 ESFE 45 30200 16FD ① (K77) HSKD 175 110
20230 16FG ① (K75) GSJA 150 100460 16CH K69 FSHC 70 50575 16CE K63 FSHE 60 40200 16GD K85 HSKD 200 150
25230 16GG K78 HSKA 175 125
FURNAS Class 14Inverse Dual Ele-
MotorHP Volts
Class 16 with ESP100Time ment Time
Size Order Heaters Order Breaker Delay FuseNumber Number
25460 16DH K72 FSHC 90 60575 16DE K69 FSHE 70 50200 16HD* K88 ISLD 250 175
30230 16HG* K85 HSKA 225 150460 16EH K73 GSHC 110 80
6" 575 16EE K70 GSHE 90 603Ø
40460 16GH ① (K76) HSKC 150 100575 16GE ① (K73) HSKE 110 80
50460 16GH ① (K78) HSKC 175 125575 16GE ① (K75) HSKE 150 100
60460 16HH* K85 ISLC 225 150575 16HE* K78 ISLE 175 125
40460 16GH ① (K77) HSKC 150 100575 16GE ① (K73) HSJE 110 80
50460 16HH* K78 HSKC 175 125575 16HE* K75 HSKE 150 90
60460 16IH* K85 ISLC 200 150575 16IE* K77 ISLE 175 110
75460 N/A N/A ISLC 250 175575 N/A N/A ISLE 200 150
8"100
460 N/A N/A JTMC 350 2253Ø 575 N/A N/A JTME 300 200
125460 N/A N/A N/A 450 300575 N/A N/A N/A 350 250
150460 N/A N/A N/A 500 350575 N/A N/A N/A 400 300
175460 N/A N/A N/A 600 400575 N/A N/A N/A 450 350
200460 N/A N/A N/A 700 450575 N/A N/A N/A 500 350
NOTE: The Class 16 starter chart shows the order number for matched coil andload voltage, i.e. a 230 volt power supply with a 230 volt coil. To use a differentcoil voltage select the same size starter with a different coil.
Nomenclature: Ex. 16 B H16 = Class 16 DP Starter.
B = Starter size, sizes are A, B, C, D, E, F, G, H. Sizedetermined by Full Load Amps and Locked Rotor Amps.
H = coil voltage. Voltages are: D = 200 V, E = 575 V,F = 115 V, G = 230 V, H = 460 V.
The Class 14 starter nomenclature can be found in your Jet & Submersible PriceBook.
* These are a special order, non-stock item. Please allow 2-3 weeks for delivery and call for pricing.
N/A - Call factory for custom panel quote.
① Effective May 2003, this model equipped with adjustable overload, K heaters are no longer required.
© 2003 Goulds PumpsEffective October, 2003Turbine Operations, Lubbock, Texas 79417
Printed in the U.S.A. on recycled paper. Specifications are subject to change without notice.
BR5-10T www.goulds.com
Goulds Pumps and the ITT Engineered Blocks symbol areregistered trademarks and tradenames of ITT Industries.
