40 - microplan-group.com · stabilité dimensionnelle grâce à l’utilisation de matériaux...
Transcript of 40 - microplan-group.com · stabilité dimensionnelle grâce à l’utilisation de matériaux...
your partner for metrology
401976 — 2016
TECHNICAL PROPERTIES OFMICROPLAN® GROUP MATERIALS
AFRICA BLACK
FINE BLACK
BLUE LANHELIN
GNU | CR5ABSOLUTE
CELITHSILICONCARBIDE (Si-SiC)
CERAMICALUMINA
(Al2O3)
DensitàDensityDensitéDichte
2.85 kg/dm3
3.0 kg/dm3
2.7 kg/dm3
3.13 kg/dm3
2.3 kg/dm3
3.1 kg/dm3
3.8 kg/dm3
PorositàPorosityPorositéPorosität
0.09% 0.15% 0.35% 0.03% - 0.0 0.0
Modulo di elasticitàYoung ModulusCoeff. d’élasticité Elastizitäts-Koeffizient
60 / 105 Gpa
90 / 110 Gpa
44 / 58 Gpa
106 / 115 Gpa
30 / 40 Gpa
340 Gpa
375 Gpa
Resistenza a compressioneCompressive strengthRésistance à la compressionDruck-Festigkeit
244 MPa
270 MPa
188 MPa
270 MPa
120 / 150 MPa
2550 MPa
2700 MPa
Resistenza a trazioneTensile strengthRésistance à la traction par fléxionZugfestigkeit
24 MPa
28 MPa
21.5 MPa
33 MPa
10 / 15 MPa
340 MPa
350 MPa
Coeff. dilatazione termicaLength expansion coeff.Coeff. de dilatation linéaireThermischer Ausdehnungskoeffi-zient
6.5 x 10-6
m/m° C5.9 x 10-6
m/m° C7.4 x 10-6
m/m° C5.8 x 10-6
m/m° C10/15 x 10-6 m/m° C
4.5 x 10-6
m/m° C7.4x 10-6
m/m° C
Conducibilità termicaThermal conductivityConductivité thermiqueWärmeleitfähigkeit
2 W /m°K
2.5 W /m°K
2 W /m°K
2.5 W /m°K
1-3 W /m°K
35 W /m°K
31 W /m°K
Modulo di PoissonPoisson’s RatioModul de PoissonPoisson Modulus
0.26 0.26 0.28 0.26 - 0.19 0.22
Durezza VikersVickers hardnessDurété VickersVickers-Härte
8.14 GPa
8.2 GPa
8.8 GPa
8.3 GPa
-22
GPa18
GPa
V. 2
017/
0
GRANITE PLATES, STRUCTURES AND MACHINE BASES
UP TO 10000 X 4000 mm
CONCEIVED SPECIAL DEVICESFOR METROLOGY
VACUUM-AIR BEARINGSSLIDING SYSTEMS
CERAMIC COMPONENTS (ALUMINA AND SILICON CARBIDE)
UP TO 3800 mm
CELITH SYNTHETIC GRANITE MINERAL CASTING BASES
METROLOGIC INSTRUMENTSAND ELECTRONIC LEVELS
LINEAR AND XY STAGES WITH HIGH ACCURACY
AND DYNAMICS
HIGH PRECISION ASSEMBLING BALL SCREWS, MOTORS,
LINEAR MOTORS, LINEAR GUIDEWAYS,LINEAR AND ROTARY ENCODERS,
MEASURE SCALES AND MECHANICAL COMPONENTS
HIGH PRECISIONVACUUM CHUCK SYSTEMS
DEMO XY STAGE MICROPLAN® GROUP CAPABILITYArea di lavoroWorking areaZone de travailArbeitsbereich
1210x610 mm 8000x3600 mm
Carico massimoMaximum loadCharge maximaleZülässige Belastung
15 Kg
In funzione delle prestazioni dinamicheDepending on dynamic performancesEn fonction des performances dynamiquesIn Abhängigkeit von den dynamischen Leistungen
Accuratezza geometrica di rettilinearitàStraightness accuracyPrécision de réctitudeGeradlinigkeit Genauigkeit
0.003 mm/m senza compensazionewithout compensationsans compensationOhne Kompensation
0,001 mm/m con sistema vacuo-pneumostaticowith vacuum-pneumostatic systemavec système aérostatique-videmit vakuum-luftgelagertem System
0,003 mm/m con sistema di guide a rulliwith roll guides systemavec système de guide à roulementmit Rollenführungen System
Accuratezza geometrica di planaritàFlatness accuracyPrécision de planéitéEbenheit Genauigkeit
0,005 mm/m2 senza compensazionewithout compensationsans compensationOhne Kompensation
0,002 mm/m2 con sistema vacuo-pneumostaticowith vacuum-pneumostatic systemavec système aérostatique-videmit vakuum-luftgelagertem System
0,005 mm/m2 con sistema di guide a rulliwith roll guides systemavec système de guide à roulementmit Rollenführungen System
Rollio, Beccheggio e ImbardataRoll, pitch and yawRoulis, tangage, lacetRollen, Nicken, Gieren
< 3 arcseconds
< 1 arcseconds con sistema vacuo-pneumostaticowith vacuum-pneumostatic systemavec système aérostatique-videmit vakuum-luftgelagertem System
< 3 arcsecondscon sistema di guide a rulliwith roll guides systemavec système de guide à roulementmit Rollenführungen System
Perpendicolarità assiPerpendicularity of axesPerpendicularité des axesAchs-Rechtwinkligkeit
< 4 arcseconds < 2 arcseconds
Accelerazione Asse X (senza carico)X-Axis acceleration (without load)Accélération de l’axe X (sans charge)X-Achsebeschleunigung (ohne Last)
2 g
In funzione della massa da muovereDepending on the mass to be movedEn fonction de la masse à déplacerAbhängig von der zu bewegenden Masse
Accelerazione Asse Y (senza carico)Y-Axis acceleration (without load)Accélération de l’axe Y (sans charge)Y-Achsebeschleunigung (ohne Last)
1 g
In funzione della massa da muovereDepending on the mass to be movedEn fonction de la masse à déplacerAbhängig von der zu bewegenden Masse
Velocità Asse XX Axis speedVitesse Axe XX-Achsgeschwindigkeit
1,8 m/sec
In funzione dell’applicazioneDepending on the applicationEn fonction de l’applicationJe nach Anwendung
Velocità Asse YY Axis speedVitesse Axe YY-Achsgeschwindigkeit
0,9 m/sec
In funzione dell’applicazioneDepending on the applicationEn fonction de l’applicationJe nach Anwendung
Precisione di posizionamentoPositioning accuracyPrécision de positionnementPositioniergenauigkeit
100 nm
In funzione dell’applicazioneDepending on the applicationEn fonction de l’applicationJe nach Anwendung
RipetibilitàRepeatabilityRépétabilitéWiederholpräzision
0,5 micron
In funzione dell’applicazioneDepending on the applicationEn fonction de l’applicationJe nach Anwendung
AccuratezzaAccuracyPrécisionGenauigkeit
± 0,003 mm/msenza compensazionewithout compensationsans compensationOhne Kompensation
± 0,003 mm/m senza compensazionewithout compensationsans compensationOhne Kompensation
StabilitàStabilityStabilitéStabilität
<40 nm
In funzione dell’applicazioneDepending on the applicationEn fonction de l’applicationJe nach Anwendung
Grazie a oltre 40 anni di esperienza nel settore della metrologia, il Gruppo Microplan® è in grado di offrire soluzioni complete e componenti di altissima precisione realizzati in granito, allumina ceramica e carburo di silicio.
A seguito della crescente richiesta della Clientela, Microplan® ha sviluppato una Divisione dedita agli assemblaggi di precisione di particolari meccanici e componenti quali guide a ricircolo di sfere, motori, motori lineari, guide lineari, encoders lineari e rotativi, scale di misura e ogni altra attrezzatura richiesta dal Cliente.
Il Gruppo Microplan® progetta e realizza banchi multi-asse con alta precisione, velocità, accelerazione e stabilità dimensionale elevate grazie all’utilizzo di materiali diversi e innovativi, combinati per ottenere le migliori prestazioni.
Grazie ad un parco macchine aggiornato ai più alti standard qualitativi, Microplan® è leader nella produzione di basamenti in granito naturale e in granito sintetico (ghisa minerale) per macchine di produzione, macchine di misura e di componenti strutturali per sistemi di posizionamento lineari e multi asse (XY).
Nelle sedi produttive in Italia e in Francia, Microplan® è in grado di eseguire lavorazioni di precisione su materiali diversi (ceramiche, carburo di silicio, vetroceramiche, vetro, materiali con durezze elevate) e di grandi dimensioni fino a 8000x4000 mm.
Lo Staff Microplan® resta a disposizione per qualsiasi informazione o richiesta tecnica.
Thank to over 40-years-experience in metrology, Microplan® Group is able to offer complete solutions and high-precision components realized in granite, alumina ceramic and silicon carbide.
Following up the growing demand of our Customers, Microplan® developed a department specialized in high-precision assembling of mechanical parts and components like roller guides, motors, linear motors, linear and rotative encoders, measurement scales and any other tool requested from our customers.
Microplan® Group is able to design and realize multi-axes benches with high precision, speed, acceleration and dimensional stability, thanks to different material combinations, aiming to get the best performances and innovations.
With a machine equipment updated to the most recent quality standards, Microplan® is leader in production, with natural granite and artificial stone (mineral cast iron), of bases for production and measurement machines and also of structural components for linear and multi-axes (XY)positioning systems.
With productive plants in Italy and France, Microplan® is able to perform precision workings on different materials (ceramics, silicon carbide, glass-ceramic, glass, high-hardness materials) and on big dimensions, up to 8000x4000 mm.
Microplan® Staff remains at complete disposal for any information or technical request.
Avec plus de 40 ans d’expérience dans le domaine de la métrologie, le groupe Microplan® peut fournir des solutions complètes et des composants de haute précision en granit, en céramique d’alumine et carbure de silicium.
Suite à la demande croissante des clients, Microplan® a développé un service dédié à l’assemblage de précision de pièce et de composant mécanique tels que des rails de guidage, moteurs, moteurs linéaires, guides linéaires, codeurs linéaires et rotatifs, des échelles de mesure et tout autre équipement requis par le client.
Le Groupe Microplan® conçoit et fabrique des bancs multi-axes de haute précision, vitesse, accélération et une grande stabilité dimensionnelle grâce à l’utilisation de matériaux différents et innovants, combinés pour obtenir les meilleures performances.
Avec un parc machine adapté pour les plus hauts standards de qualité, Microplan® est leader dans la production de bases en granit naturel et en granit synthétique (fonte minérale) destinées à des machines de production, machines de mesure et des composants structurels pour des systèmes de positionnement linéaires et multi axe (XY).
Sur les sites de production en Italie et en France, Microplan® est capable d’effectuer des usinages de précision sur différents matériaux (céramique, carbure de silicium, verre céramique, verre, matériaux de dureté élevée) et de grandes dimensions jusqu’à 8000x4000 mm.
Le personnel de Microplan® reste à votre disposition pour toute information technique.
Dank der über 40-jährigen Erfahrung in der Messtechnik kann die Microplan®Group Komplettlösungen und hochpräzise Komponenten aus Granit, Alumina-keramik und Siliziumkarbid anzubieten.
Um die konstante Nachfrage unserer Kunden zu folgen, hat Microplan® eine Abteilung entwickelt, die sich auf die hochpräzise Montage von mechanischen Teilen und Komponenten wie Rollenführungen, Motoren, Linearmotoren, Linear- und Rotationskodierer, Messskalen und anderen von unseren Kunden gewünschten Werkzeugen spezialisiert hat.
Microplan® Group kann, Multi-Achs-Bänke mit hoher Präzision, Geschwindigkeit, Beschleunigung und Formstabilität entwerfen und realisieren, dank verschiedener Materialkombinationen, um die besten Leistungen und Innovationen zu erzielen.
Mit einer nach neuesten Qualitätsstandards aktualisierten Maschinenausstattung ist Microplan® führend in der Produktion von Naturgranit und Kunststein (Mineralguss), von Basen für Produktions- und Messmaschinen sowie von Strukturbauteilen für lineare und mehrachsige Positioniersysteme.
Mit Produktionsanlagen in Italien und Frankreich kann Microplan®, Präzisionsarbeiten an verschiedenen Materialien (Keramik, Siliziumkarbid, Glaskeramik, Glas, hochharte Materialien) und großen Abmessungen bis zu 8000x4000 mm durchzuführen
Das Microplan®-Personal steht für alle Informationen oder technischen Anfragen gerne zur Verfügung.