4 dc 2a motor controller Wm 24 V dc - Somfy · SolutionS for commercial buildingS Adhesive area for...
2
SOLUTIONS FOR COMMERCIAL BUILDINGS 4 DC 2A Motor Controller WM 24 V DC animeo Solo animeo IB+ animeo KNX animeo LON Motor controller for interior blinds, interior Venetian blinds and windows. To individually control four 24 V DC motors. Available in wall-mounted (WM) version. Installation advantages Wiring Functional advantages > Spring connectors and tension relief with cable ties for safer and quicker installation. > The device can be used “out of the box” without necessary program- ming with a LON software. > The animeo LON Motor Controllers are Free Topology Transceiver (FTT) devices. > All windows can be managed independently from each other. > Intelligent switching between manual and automatic operation to guarantee excellent user-friendliness and energy savings. > Cost savings through the use of 8 freely defineable binary inputs. Classification The Motor Controller is an electronically and manually- operated, independently-mounted control. • Class A control function • Type 1 action • Pollution degree: 2 • Rated impulse voltage: 4 kV • Temperature of the ball hardness test: 75 ° C • Type X attachment • Method of attachment for non-detachable cords: screwless spring terminal • EMC emission test: U DC = 24 V DC I DC = 9 A (EN 55022 Class B emission) Ref. 1860130 Connection Cables Twisted pairs Max. distance Motors Min.: 2 x 0.6 mm/22 AWG Max.: 2 x 2.5 mm 2 /14 AWG - 20 m Switches Min.: 3 x 0.6 mm/22 AWG Max.: 3 x 2.5 mm 2 /14 AWG Recommended 100 m Group control Min.: 3 x 0.6 mm/22 AWG Max.: 3 x 1.5 mm 2 /16 AWG Recommended 50 m LON bus 2 x 0.8 mm/20 AWG Required, following LON topology guidelines Ext. (LON Somfy Subnet) Min.: 2 x 0.25 mm 2 /24 AWG Max.: 2 x 0.75 mm 2 /18 AWG Required 200 m 24 V DC Min.: 2 x 1.5 mm 2 /16 AWG Max.: 2 x 2.5 mm 2 /14 AWG 10 m
Transcript of 4 dc 2a motor controller Wm 24 V dc - Somfy · SolutionS for commercial buildingS Adhesive area for...
S o lu t i o n S f o r c o m m e r c i a l b u i l d i n g S
4 dc 2a motor controller Wm 24 V dcanimeo Solo animeo IB+ animeo KNX animeo LON
Motor controller for interior blinds, interior Venetian blinds and windows.
To individually control four 24 V DC motors.
Available in wall-mounted (WM) version.
Installation advantages
Wiring
Functional advantages
> Spring connectors and tension relief with cable ties for safer and quicker installation.
> The device can be used “out of the box” without necessary program-ming with a LON software.
> The animeo LON Motor Controllers are Free Topology Transceiver (FTT) devices.
> All windows can be managed independently from each other.
> Intelligent switching between manual and automatic operation to guarantee excellent user-friendliness and energy savings.
> Cost savings through the use of 8 freely defineable binary inputs.
Classification
the motor controller is an electronically and manually- operated, independently-mounted control.
• ClassAcontrolfunction• Type1action• Pollutiondegree:2• Ratedimpulsevoltage:4kV• Temperatureoftheballhardnesstest:75°C• TypeXattachment• Methodofattachmentfornon-detachablecords:
screwless spring terminal• EMCemissiontest: U
DC = 24 V DC I
DC = 9 A
(EN55022ClassBemission)
Ref.1860130
connection cables twisted pairs max. distance
motors Min.:2x0.6mm/22AWG Max.:2x2.5mm2/14AWG
- 20m
Switches Min.:3x0.6mm/22AWG Max.:3x2.5mm2/14AWG
Recommended 100m
group control Min.:3x0.6mm/22AWG Max.:3x1.5mm2/16AWG
Recommended 50m
lon bus 2x0.8mm/20AWG Required,followingLONtopology guidelines
ext. (lon Somfy Subnet)
Min.:2x0.25mm2/24AWG Max.:2x0.75mm2/18AWG
Required 200m
24 V dc Min.:2x1.5mm2/16AWG Max.:2x2.5mm2/14AWG
10m
S o lu t i o n S f o r c o m m e r c i a l b u i l d i n g S
Adhesive areafor ID label
IB+
CIB+
In IB+
CIB+
Out
Ra b
-R2120 Ohm
Ra b
-R1120 Ohm
-
N N L L
- + +
1860093
Somfyanimeo IB+ Power 4.5 DC
Power
mains
24 V DCPower
- - + +24 V DCPower
- - + +24 V DCPower
AC Input: 220 V - 240 V ~50/60 Hz / 0.75 ADC Output: 24 V = 2.5 A (100 %), 4.5 A (ED 50 %)
N N L L
1860093
Somfyanimeo IB+ Power 4.5 DC
Power
mains
- - + +24 V DCPower
AC Input: 220 V - 240 V ~50/60 Hz / 0.75 ADC Output: 24 V = 2.5 A (100 %), 4.5 A (ED 50 %)
mains230 V50 Hz
L1NPE
Junctionbox
2 x 1.5 mm² 2 x 1.5 mm²
C1-4In Out
1860130
Somfyanimeo LON 4 DC 2 A Motor Controller WM 24 V
LED
anim
eoRT
S m
odul
e 43
3.42
MHz
1860
162PIN
Service
LON Net
each:J-Y(St)Y
2 x 2 x 0.8 mm2
max. 50 m
each:J-Y(St)Y
2 x 2 x 0.8 mm2
max. 50 m
C1-4
C1 A B
C2 C D
C3 E F
C4 HG
A BExt.
Local push buttonMotor 1
Local push buttonMotor 2
Local push buttonMotor 3
Local push buttonMotor 4
LPT-10LONWORKS® Network
com
bina
ry in
put C
bina
ry in
put D
com
bina
ry in
put A
bina
ry in
put B
com
bina
ry in
put E
bina
ry in
put F
com
bina
ry in
put G
bina
ry in
put H
LON ALON B
LON ALON B
LON SOMFY Subnet2 x 2 x 0.8 mm2
max. 200 m
1860086
Somfyanimeo IB+ 4 DC/E Motor Controller WM 24 V DC
CM1 M4
C A BExt.
Local push buttonMotor 1
…
…
Local push buttonMotor 4
com
bina
ry in
put A
bina
ry in
put B
com
bina
ry in
put G
bina
ry in
put H
Motor 1
1 2
1 2Junctionbox
Motor 4
1M4
each0.25 mm2
2 x 0.75 mm2
max. 20 m
2
1 2
M1
M1˜
Motor 2
1 2
1 2
M2
M2˜
Motor 3
1 2
1 2
M3
M3˜
M4˜
Motor 1
1 2
1 2Junctionbox
Motor 4
1M4
0.25 mm2
2 x 0.75 mm2
max. 20 m
2
1 2
M1
M1˜
M4˜
animeo ID No.:
LV 25 B44, B64LW 25, B44, B83LT 28 B73
LV 25 B44, B64LW 25, B44, B83LT 28 B73
Rese
t / P
rog
SCR
EU
US
Rese
t / P
rog
Ext.
IB
4 dc 2a motor controller Wm 24 V dc
CHARACTERISTICS
Wm ref. 1860130
Supply voltage 21.5–28VDC
Stand-by current (iec 62301) 0.1A@24VDC
Stand-by power (iec 62301) 1.5W@24VDC
lon transceiver FTT
max. motor current consumption 4x2.3A@24VDC
Supply voltage of group control input SELV,16VDC=
Supply voltage of local push buttons SELV,16VDC=
input/output Short circuit protected
terminals Spring connectors
terminal lon LON bus terminal (green)
running time per output Max. 327seconds
operating temperature 0 °Cto45 °C
relative humidity 85 %
material of housing CC-ABSpolycarbonate
Housing dimensions (w x h x d) 180x255x63mm
degree of protection IP20
Protection class III
conformity www.somfy.com/ce
