4C TechnologiesRenewable Energy Division

Company Introduction:

4C Technologies, is a US based project management company that provides a multitude of business services in oil, gas and alternative energy sectors. We build and manage wind energy farms, finance drilling projects and other services for our clients all over the world. The firm pursues projects domestically and internationally especially in Latin America, the Middle East and Asia.

Our state of the art wind and solar farm projects are going to change how energy is produced throughout the world using cutting edge technology to maximize output from our wind turbines. Using these turbines allows 4C to produce more energy than conventional wind and solar farms.

In Renewable Energy Industry we have the expertize in:

• Wind & Solar Farm. (Planning, Designing, Manufacturing, maintenance).

• MAGNETIC WAVEFORM RENEWABLE ENERGY Renewable Power Technology

SEG: A Joint Venture of 4C Technologies & Searl Magnetic International

Searl Technology, Inc. is a Florida corporation. It is a development stage privately held company and is the holding company of Searl Magnetics, Inc (a Nevada corporation) and Searl Aerospace, Inc., (a Nevada corporation) and eMpasys Renewable Energy Solutions, which are wholly owned subsidiaries collectively referred to herein as (the “Company”). The Company is engaged in the business of research, development, re-development and licensing of its proprietary intellectual property involving the Searl Effect Generator (SEG).

4C Technologies holds the exclusive rights to Manufacturer / Sale / Maintenance of SMI products.

SEG Technology & Products:

• Advance Magnetics• Electric Power Generation• Waste To Energy Systems• Wireless Electric Meters• Electric Vehicles

Technology Principles Information

The Standalone Electric Generator consists of 3 large ring-type stators (generators, about which, or in which a rotor rotates) that are specially magnetized with patterns designed to generate continual motion of similarly magnetized cylindrical rotors. The rotors are free to rotate around the stator rings with mutually interactive eddy currents of induction that form frictionless magnetic bearings between moving parts. In the process, electrons are paired (bosons), accelerated outward and harnessed for their kinetic energy before they eject out to the ionized air. Please refer to videos.

The technology involves quantum effects between layered materials that convert natural and ever-present ambient sources of energy into electrical power. While moving generator parts are designed to operate on a magnetic bearing, thus prevent mechanical wear for an unlimited lifetime of continuous use.

Product Demonstration Available to see.

SEG : Searl Effect Generator

Inventor’s Information

Professor John R. R. Searl, President, Director. Prof. Searl is the inventor of the Searl Effect Generator (SEG) technology of which several working units were built and demonstrated in the UK during the l950’s. Born in England on May 2, 1932, John Searl experienced recurring childhood dreams that led him to design a revolutionary electrical generator fueled only by rotating magnets. The opportunity to create his design came during his employment (c1946) at British Rewinds Ltd., as an apprentice Electrical Engineer. Further development of his design was accomplished during his employment (c1953) as Foreman at Midlands Electric Board, when Searl was challenged to build the unit or vacate his position. Searl built the SEG. Even though he has endured many years of harassment and government interference (inspired by special interests),including the seizure of his working SEG unit that had powered his home for many years, Prof. Searl has continued his quest to provide clean, cheap, safe and abundant energy to the world. He has lecture extensively on the technology at the University level, internationally.

Benefits of SEG On-Site Power Production• Extremely Cost effective.• Exceeds performance of existing technologies, renewable or conventional by

substantial margins.• Operates 24/7/365 in any temperature or climate.• Technology conforms to the known principles of thermodynamics based on real

life experimentation.• Operates as both a motor and generator.• Requires no fuel, sun, wind, or geothermal temperatures by organizing and

harvesting environmental electrons.• Costs 30% less than any known existing alternative.• Operation creates no noise, gas emission, odor, water or radiation.• Cannot physically wear out – components ride on a cushion of magnetism like the

bullet trains of the world.• We believe it’s impossible to reverse engineer the proprietary magnetic sine wave

imprint. (PATENT TECHNOLOGY)• Until now scientists have not had the proof to analyze the technology’s novel

advances sufficiently.• Applications from transportation to major energy production.

The RPT is an advanced energy storage power system that can be designed to provides 100% on demand power and will generate electricity without external input (e.g. fossil fuels such as oil or natural gas), producing economically sustainable clean energy. The Onsite AES Power System can be deign for OnSite power production where the power is needed, significantly less than any other renewable or alternative energy solutions.

The Onsite AES Power System is a scalable renewable and alternative energy solution for small to large electricity power consumption requirements. It can be utilized to support local power substations effectively bypassing transmission lines that are associated with power lose and energy cost increasing. The Onsite AES Power System will help reduce the burden on the present day grid by supporting it where it is most needed

The systems are built to the highest industrial quality and completely self-contained. With energy demands growing, a Onsite AES renewable Power System (Microgrid) provides opportunities for electric utility operators to transform their electrical distribution networks and lower operation cost, Commercial property owners can have a NetZero energy Bill and Alternative Energy providers will be able to generate additional revenue with a zero emission green energy solution.

Onsite RPT / AES (Advance Energy Storage) Power System

What makes the technology unique?:The scalable Onsite AES Power system can generates unlimited renewable energy for an size project.

What makes the Onsite AES Power system different from Solar, Wind or any other energy, its ability to produce unlimited power at the client’s site were the power is needed.What are the principles of the technology? :

The Onsite AES Power System (Renewing Power Technology) is an continues power regeneration solution that is customized to provide electricity power on demand. The system produces continues power by utilizing Power Electronics and Power Cells with renewable proprietary engineering, No Fuel Cells,No Solar Panels,No Wind Turbine.

The Onsite AES Power system will be customized above and beyond any Independent Underwriters Laboratories standards. The Onsite AES Power system is designed to generate and produce Electricity based on the required Volts, Amps, Watts, Hertz and other specifications. This is a independent system that feeds power to your property or commercial projects just like your local electric company.

The Onsite AES Power system will be customized and configured for each application as a Eco-friendly carbon negative renewable energy solution. The Onsite AES Power system owner will be able to generate clean energy 24 hrs a day – 7 days a week.

1. Analyze Power Consumption2. Pre-Electricity Power Assessment3. OnSites power Assessment4. Design /Customization5. Permitting /Prepare Installation Site / Schedule Install Date6. Install Power Energy Meter7. Check Remote Metering Communication(Optional) (1st stage)8. Check remote Monitoring (Optional) (1st stage)9. Install Onsite AES Power System10. Check KVA/KW Power Production. (1st stage)11. Check Remote Metering Communication(Optional) (2nd stage)12. Check remote Monitoring (Optional) (2nd stage)13. Check Onsite AES Power system KVA/KW Production (2nd stage)14. Commission Onsite AES Power System For OnSite Operation15. Customer Sign Onsite AES Power System Operating Authorization

Implementation & Commissioning Process:

Energy To Market Chart

25 Kilowatt SEG specifications 1 Megawatt SEG specifications

Dimensions:

Size: 110cm in diameter by 6cm in heightWeight: 145 KilogramsOutput: 15-25 Kilowatts min.Construction: 4 solid concentric ring layers.

Dimensions:

Size: 384 cm in diameter by 16.5 cm high.Power Plant Weight: 4824 Kilograms.Output range: 1MW minimum capacity.Construction: 4 solid concentric ring layers.

The Types and Exact Isotopes of materials are classified. Manufacturing time is 6 to 8 weeks.

SMI / eMpasys Solutions owns the full and exclusive (Worldwide) rights to R&D / Manufacturer the unique SEG Magnetizer Technology, and to develop prototypes, as well as manage, negotiate and authorize licenses and agreements with the inventor.

4C Technologies holds the Exclusive rights to use SEG / eMpasys, proprietary Renewable Technologies / Engineering solutions for Asia / Middle East / USA (Texas) Markets.

SPECIFICATIONS:Outputs: Cont.: 10 MWMax Power: 10.8 MWOutput Voltage: 440 ( Adjustable)Total Amps: 13122 (approx)Phase: Single / 3 PhaseOutput Frequency: 50 / 60 HZEfficiency at Full Load: 82 %Voltage Distortion: Less than 18 +/-%Waveform Type: Pure Sine WaveConnections: (2) Hard Wire 3 wire (H+N+G)

System will installed in tandem.

SYSTEM DESCRIPTION FOR 10 MEGAWATT

Communication and Management:Control panel: Fully digital monitoring systemCommunication: Wireless Meter / Software Based.

We are designing a digitally controlled Android / Windows / IOS Based applications.

Emergency Power Off: Yes (switch)Surge Protection and Filtering:

Filtering: Full time multi-pole noise filteringEnvironmental: (Design Per Military Grade Applications)

Operating Temp: 0-150*F (able to work in extreme environments)(Can be customized for any working temperature)

Humidity Range: 0-100%Operating Elevation: 0-4000 MetersAudible noise at 1 meter from surface of unit: 5 Dba

SYSTEM DESCRIPTION FOR 10 MEGAWATT

Thank You for choosing 4C Technologies as your Primary Source of On-Site Power Production

Head Office

4C Technologies, Inc. USARenewable Power Division

Suit- 3003845 FM 1960 W , Houston, TX 77068USA www.4ctechnologies.com

Office No : +1-281-580-2853

(Ext-1514)

bjanjua@4ctechnologies.comContact: Bilal Janjua