Step 1 ConnectingConnecting the scanner to your computer

* Please use the AC adapter provided with the scanner.

Step 2 InstallingDo one of the following to install the scanner driver:● InserttheSetup/ApplicationDisc,includedwith

yourscanner,intoyourDVD-ROMdrive.● Download the latest driver from our official

website: search AD480 in http://plustek.com/usa/support/drivers-and-downloads.html

Follow the on-screen instructions to install allsoftware:

For installation videos, please visitwww.plustek.com/ad480

Loading Plastic Cards

Clearing Paper JamsIfapaperjaminthescannerhappens,pleaseopentheADF cover, gently but firmly pull the jammeddocuments out of the scanner.

Cleaning the ADFClean your scanner regularly to ensure the best scanning performance.CleanFeedRoller:

CleanPadModule:

Clean ADF Glass:

Fordetailedinformation,pleasevisitwww.plustek.com/ad480

PDF Button

1. Click button to select saving folder.2. Click Setupbuttontoselectthefilenameformat.

3. Selectdesiredfileformatfromthedropdownlist.This selection should match with the selection of Scan Mode.

Information

Searchable PDF file formatis only available when OCRsoftware is installed in your system.

4. Click Configurebuttontoconfigureadvancedsettings forPDFfile format,youmayselect togenerateallpagesinonefile.

Click SettingbuttontoselectthedesiredOCRlanguage.

5. Check the scan settings and make any required changes.

6. Afterallsettingsaredone,clickApply button.7. Press the PDF button on the scanner panel to

perform the scanning task.

AD480 Quick Start Guide17-07-2BB5050-C

Useful Tips ■ Ifyouwant toscansingle-sideddocument,

select Scan Type from the dropdown list.

■ IfyouwanttoscanA4sizedocument,selectPage Size from the dropdown list.

■ If youwant toscancolordocument, selectScan Mode from the dropdown list.

BCR Button

1. Click Configure button to configure BCRsettings.SelectthedesiredBCRlanguage.

2. Check the scan settings and make any required changes. For examples:

■ SelectResolution from the dropdown list:

3. Afterallsettingsaredone,clickApply button.4. Press the BCR button on the scanner panel to

perform the scanning task.

Scan Button

1. Click Addbuttontoaddfrequently-usedimage-editingprograms,forexample:Photoshop.

2. Click Save Setup button to select saving folder andthefilenameformat.

3. Selectdesiredfileformatfromthedropdownlist.This selection should match with the selection of Scan Mode.

4. Click ConfigurebuttontoconfigureadvancedsettingsforJPG,TIFF-CompressedandPDFfileformats.

5. Check the scan settings and make any required changes.

6. Afterallsettingsaredone,clickApply button.7. Press the Scan button on the scanner panel to

perform the scanning task.

Information

■ The Scan button is customizable, you mayselect the desired utilities from the Button Template dropdown list.

■ IfyouselecttheFTPUtility,you have to setup the FTP connection by clicking the Add button.

Fordetailedinformation,please visit www.plustek.com/ad480