Division of City Schools Olongapo

Olongapo City National High School

Basic Education Curriculum

THIRD GRADING PERIODICAL TEST IN T.L.E. GRADE 7&8 (COMPUTER HARDWARE SERVICING)NAME:__________________________________________

Grade/Sec(Curriculum):_________________I. Directions: MULTIPLE CHOICEChoose the letter of the best answer.1. Which tool is used to loosen or tighten cross-head screws?

a. Hex driver

c. Philips head screwdriver

b. Torx screwdriver

d. flathead screwdriver

2. Which tool is used to strip and cut wires?

a. Pliers

c. Needle Nose Pliers

b. Wire cutter

d. Part Retriever

3. What is another term for Part Retriever?

a. Pearl Catcher

c. Part Pickerb. Golden Retriever

d. Nose Retriever

4. Which tool is used to blow away dust and debris from different computer parts without touching the components?

a. Hex driver

c. Compressed air

b. Anti-static mat d. Wire cutter5. It is sometimes called a nut driver, is used to tighten nuts in the same way that a screwdriver tightens screws.a. Torx screwdriver

c. flathead screwdriver

b. Philips head screwdriver d. Hex driver6. All are examples of workplace hazards except for one, which one is it?a. frayed electrical cords c. boxes stacked precariously

b. noisy machinery

d. books stacked neatly in bookshelves 7. It is a type of hazard that involves machinery or electronic equipment.a. mechanical hazard c. chemical hazard

b. physical hazard

d. biohazard8. Identify what kind of hazard is being described: Open CRT monitor.a. mechanical hazard c. chemical hazard

b. physical hazard

d. electric shock hazard9. What does ES in ESD tools stand for?a. Electric-Status

c. Electro-Static

b. Ethereal-State

d. Electronic-Station10. Listed below are examples of cleaning tools except for one:

a. compressed air

c. cleaning cloth

b. needle-nose pliers

d. cable ties

II. Classification: Classify the following screws according to their type: PHILLIPS HEAD, FLATHEAD, TORX, or HEX.

III. Fill in the blanks by choosing from the given words: HEX DRIVER, DEBRIS, LEAD, DISTILLED, EQUALIZE, COUNTERCLOCKWISE, PHILLIPS, STAR, CLOCKWISE, and ISOPROPYL.

1. The purpose of an antistatic wrist strap is to ________ the electrical charge between you and the equipment.

2. Turn the screwdriver _________ to tighten the screw.

3. Turn the screwdriver ________________ to loosen the screw.

4. Use a ________ head screwdriver with crosshead screws.

5. Torx screwdriver is used to loosen or tighten screws that have a ______-like depression on the top.6. Compressed air is used to blow away dust and ______ from different computer parts without touching components.7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip contains _____ which can act as a conductor and may damage the computer components.

8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with _______ water and wipe the screen from top to bottom.

9. Clean the contacts on components with _________ alcohol.

10. Use a __________ to loosen and tighten bolts that have a hexagonal (six-sided) head.IV. Organize the following tools according to their corresponding category by writing: ESD, HAND, CLEANING, or DIAGNOSTIC.

Prepared By:

MAY JOIE J. ALCARAZ

T.L.E.-H.E. TeacherI. Directions: MULTIPLE CHOICEChoose the letter of the best answer.1. Distinguish the tool used to loosen or tighten cross-head screws. C

2. Distinguish the tool is used to strip and cut wires. B

3. Give another term for Part Retriever. A

4. Identify the tool used to blow away dust and debris from different computer parts without touching components. C

5. Identify the tool that is sometimes called a nut driver and is used to tighten nuts in the same way that a screwdriver tightens screws. D

6. Select the material that is not included in the following examples of workplace hazards. D

7. Identify the type of hazard that involves machinery or electronic equipment. A

8. Identify what kind of hazard is being described: Open CRT monitor. A

9. Identify the meaning of the letters ES from the acronym ESD from computer hardware tools. C 10. Select the item that is not an example of a cleaning tool. B

II. Classification: Classify the following screws according to their type: PHILLIPS HEAD, FLATHEAD, TORX, or HEX.

1. Classify the picture of the screw according to its type. TORX

2. Classify the picture of the screw according to its type. FLATHEAD

3. Classify the picture of the screw according to its type. PHILLIPS HEAD

4. Classify the picture of the screw according to its type. HEX

5. Classify the picture of the screw according to its type. PHILLIPS HEAD

6. Classify the picture of the screw according to its type. TORX

7. Classify the picture of the screw according to its type. HEX

8. Classify the picture of the screw according to its type. FLATHEAD

9. Classify the picture of the screw according to its type. HEX

10. Classify the picture of the screw according to its type. PHILLIPS HEAD

III. Fill in the blanks by choosing from the given words: HEX DRIVER, DEBRIS, LEAD, DISTILLED, EQUALIZE, COUNTERCLOCKWISE, PHILLIPS, STAR, CLOCKWISE, and ISOPROPYL.

1. The purpose of an antistatic wrist strap is to EQUALIZE the electrical charge between you and the equipment. 2. Turn the screwdriver CLOCKWISE to tighten the screw.

3. Turn the screwdriver COUNTERCLOCKWISE to loosen the screw.

4. Use a PHILLIPS head screwdriver with crosshead screws.

5. Torx screwdriver is used to loosen or tighten screws that have a STAR -like depression on the top.

6. Compressed air is used to blow away dust and DEBRIS from different computer parts without touching components.7. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip contains LEAD which can act as a conductor and may damage the computer components.

8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with DISTILLED water and wipe the screen from top to bottom.

9. Clean the contacts on components with ISOPROPYL alcohol.

10. Use a HEX DRIVER to loosen and tighten bolts that have a hexagonal (six-sided) head.

IV. Organize the following tools according to their corresponding category by writing: ESD, HAND, CLEANING, or DIAGNOSTIC.

1. needle nose pliersHAND

2. multimeterDIAGNOSTIC

3. part retrieverHAND

4. lint-free clothCLEANING

5. torx screwdriverHAND

6. loopback adapterDIAGNOSTIC

7. compressed airCLEANING

8. hex driverHAND

9. antistatic matESD

10. tweezersHAND

11. phillips head screwdriverHAND

12. wire cutterHAND

13. cable tiesCLEANING

14. antistatic wrist strapESD

15. flathead screwdriverHAND

16. flashlightHAND

17. soldering ironHAND

18. parts organizerCLEANING

19. bitsHAND

20. paint brushCLEANING