3rd COLD GAS - CIAC1).pdf · 3rd COLD GAS SPRAY Summer School 3rd - 4th June, 2015 Innovation...
9
3 rd COLD GAS SPRAY Summer School 3 rd - 4 th June, 2015 & Innovation Workshop 5 th June, 2015 BARCELONA / Spain Thermal Spray Centre (CPT) Thermal Spray Centre (CPT) c/ Martí i Franquès 1. Barcelona 08028. España, T: +34 93 402 1302; www.cptub.com; e-mail: [email protected] ORGANIZERS CPT is member of:
Transcript of 3rd COLD GAS - CIAC1).pdf · 3rd COLD GAS SPRAY Summer School 3rd - 4th June, 2015 Innovation...
3rd COLD GAS SPRAY
Summer School 3rd - 4th June, 2015
& Innovation Workshop
5th June, 2015
BARCELONA / Spain
Thermal Spray Centre (CPT)
Thermal Spray Centre (CPT)
c/ Martí i Franquès 1. Barcelona 08028. España, T: +34 93 402 1302;
www.cptub.com; e-mail: [email protected]
ORGANIZERS
CPT is member of:
The principal attribute of this novel technique lies in its capability of producing tailor made properties of coatings by optimizing the performance of the substrate, the material to be deposited and the process design parameters for a multiplicity of industrial applications. An interactive session based on real-life case studies and demonstrators will illustrate the potential of Cold Gas Spray (CGS) process and focus on the problems and future challenges of the Thermal Spray technology in today’s competitive world. Who Should Attend? Scientists, engineers, techno-entrepreneurs, product developers and design engineers, product marketers, lecturers, managers and students who are interested to know the recipe of CGS for protecting and enhancing product surfaces for diverse applications. The target is to have a maximum of 30 people attending the Summer School. What is included?
The course fee includes:
• Printed course materials
• Course certificate
• 3 hotel nights (2,3 and 4th June)
• 2 days lunch
• Formal summer school dinner (3th June)
• Transport from hotel to summer school location
• Special cost for the Innovation Workshop participation
Course fee: 1.100,00-€+ VAT
If you are interested in join the 3rd CGS Summer School and Innovation Workshop contact @ Dr. Irene Garcia Cano by email: [email protected]
Objective The objective of this course is to introduce the recipe of the emerging Cold Gas Spraying (CGS) technology for protecting and enhancing surfaces of industrial products.
Thermal Spray Centre 3rd Summer School – 3rd - 4th June 2015
Introduction
Basic background and evolution of CGS ; Fundamentals and Technology Key Definitions
Fundamentals of Solid State Coatings and Surface Mechanics
Introduction; Interfaces and stabilities in solid state; Surface temperatures in moving bodies;
Stress and deformation fields in half-space and layered elastic media; Thermoplasticity and
viscoplasticity; Perfect plasticity; Rough surfaces.
CGS Fundamentals and Operational Parameters
Particle velocity; Spray distance; Feeding rate; Spray angle; Temperature; Substrate
CGS Processes and Equipment
Low Pressure Cold Gas Process and Equipment; High Pressure Cold Gas Process and Equipment;
Gas influence and selection
CGS Feedstocks/Materials and Quality Control
Classification of TS feedstocks/ Materials; Microstructural aspects of TSCs; Feedstock attributes;
Selection of feedstocks/materials for TS processes
Testing and Quality Control for CGS Coatings
Metallographic preparation and structure characterization; Mechanical tests; Corrosion tests;
Wear test; International standards for testing; Significance of testing standards
Applications of CGS Processes
Case histories and process economics; Case histories: Corrosion, electronics, rebuilding, niche
applications; Control; Cost assessment of CGS processes and equipment
Course Outline
Thermal Spray Centre Centre de Projecció Tèrmica
Thermal Spray Centre 3rd Summer School – 3rd - 4th June 2015
Tentative programme
The Innovation Workshop on CGS is one of the Novelties within this 3rd edition of the CGS Summer School. Technology, raw materials, gas supplying and applications will be treated from the innovation perspectives. As all the CGS market players know, Cold Gas spray is an emerging technology with a high level of innovation which: • Add value to existing products by enhancing performance and improving functionality. • Can offer a more energy- and material-efficient manufacturing route that provides
environmental benefits such as the elimination of harmful liquid waste. • Bring the possibility to obtain unique products that until the development of cold spray
could not be realized because of technical or economic obstacles. The Workshop Formula consists in 10 minutes presentations where innovations with a high maturity grade of the developments are exposed. The presentation should include: what brings innovations to the industry, latest results and comparison within the actual solutions, if any. The programme is open to any participant interested in explain its innovations in the CGS field. Feel free to contact us if you are interested in share with the participants your latest innovations. The Innovation Workshop will be closed with a Round Table where specialists from industry, research and participants will exchange opinions and debate around CGS technology. Who Should Attend? Scientists, engineers, techno-entrepreneurs, product developers and design engineers, product marketers, lecturers, inversors, managers and students who are interested in explore CGS latest innovations . What is included?
The Innovation workshop fee includes:
• Printed workshop materials
• Innovation workshop certificate
• 1 day executive lunch (5th of June)
• Visit to CPT-CGS facilities and demo within the only CGS technology existing in Spain
Innovation workshop fee: 300,00-€+ VAT
If you are interested in join the Innovation Workshop contact @ Dr. Irene Garcia Cano by
email: [email protected]
Objective The scope of the Innovation Workshop is to meet for one day the latest innovations across all the value chain of the CGS technology.
Thermal Spray Centre 1st CGS Innovation Workshop – 5th June 2015
Research
Latest trends on CGS technology research
Raw materials
Widespreading the use of materials for CGS technology
New requirements for the CGS technology
Gas supply
Adaptation of gas supply systems for new applications
Equipment
Innovations on low pressure Cold Spray system
Latest innovations on High Pressure Cold Gas Spray Systems
Innovation Workshop Outline INNOVATIONS …across all the CGS market chain value
JobShop/CG coatings producers
Applications R+D
Technology Provider
Raw material Provider
Gas Provider
Tentative programme
Thermal Spray Centre 1st CGS Innovation Workshop – 5th June 2015
Top-End Applications
Cost-effective materials for larger blades for off-shore wind energy applications
To Zero-Oxidation - Improved high temperature resistance with intermetallic coatings
using cold gas spraying
CGS as an alternative to Hard-Chromium Technologies
Super alloys coatings: avoiding oxidation using CGS system
Thinking in big - Metallic glass coatings using cold spray technology
Repair & Restore: CGS technology as a new tool for industry
Cold Gas Spray - a new 3D printing technolgy to built up parts
Intelligent production system for Nanocoatings through Cold Gas Spray
CGS: A tool for supersonic deposition of nano-structured surfaces
Smart coatings for smart cities
Cold sprayed multifunctional coatings for top end applications
Biocompatible coatings to lifespan the use of prostheses
Growing Polymer coatings: opening new applications
Round table
Current and future demands in Cold Gas Sprayed coatings
Challenges on CGS technology
Looking for Market niches…
Participants to round table: industrials and researchers.
Tentative programme
Thermal Spray Centre 1st CGS Innovation Workshop – 5th June 2015
INNOVATIONS …all across the CGS market chain value
Thermal Spray Centre Centro de Proyección Térmica
Finca Pedro Pons (Vallvidrera Avenue, 25)
The Agustí Pedro i Pons University Foundation was declared its universal heir by the Most Excellent Dr. Agustín Pedro Pons in his last will and testament on September 9, 1960. In this will he bequeathed the Vallvidrera de Can Mestres’ Property, located in Av. Vallvidrera, 25-29, to the University of Barcelona. The masía (traditional catalan farmhouse) of Can Mestres is well-known by many passers-by thanks to its sgraffito, which were probably added to the house built in the 18th Century on the site of another 16th-Century farmhouse.
The sgraffito take up the north and south facades, and one of them boasts a sun dial which dates from 1776, which could be when the sgraffito were made. The masía were restored in 1960, and once again in 2000, offering an ensemble with a quality similar to those still left in the Sarrià area. On the upper roof, the weather cock features a patufet*. It was made of iron, with very strong gears, and has been working for more than 50 years. While the whole unit may seem bulky, it moves very fast on windy days.
Pedro Pons building
LOCATION
Thermal Spray Centre 3rd Summer School – 3rd - 4th June 2015
How to arrive? The organization will provide transport support to all the participants from the hotel to the summer school location and back.
Thermal Spray Centre Centro de Proyección Térmica
CPT-BIO
C/Feixa Llarga, Campus Hospital
Bellvitge, Edifici Biopol´H, Bellvitge,
Barcelona, Spain
LOCATION
Thermal Spray Centre 1st CGS Innovation Workshop – 5th June 2015
How to arrive? The organization will provide transport support to all the participants from the hotel to the summer school location and back. If you want to come by your own: Public transport: L5 (metro red line), Hospital Bellvitge Stop By taxi: 10 minutes from International Prat Airport
The Innovation Workshop will be held in the CPT-Bio division located within the Medical Campus of Bellvitge. In these facilities CPT has its own CGS system which will be employed for demo activities inside the Workshop.
Address:
CPT-BIO facilites
Thermal Spray Centre Centro de Proyección Térmica
REGISTRATION I would like to register the following persons for the
Participant data
Name and surname:
Profession:
Place of work:
E-mail:
Telephone: Fax:
How did you recieve the information about the CGS summer school?
Email Internet Personal recommendation Others:…………………………………………………
Organization data
Organization:
Address:
Zip code: Country:
Payment 3rd CGS Summer school : 1.100,00-€ + VAT Payment Innovation Workshop: 300,00-€ + VAT Payment 3rd CGS Summer school +Innovation Workshop: 1.300,00€ + VAT
Bank transfer
Name: Fundació Bosch i Gimpera – UB
Vat number : ESG08906653
Bank Code: CESCESBBXXX
IBAN Code: ES7320130088630200326711
Indicate the organization name and the participant with the Reference: CGS Summer School 2015
Please, send the registration sheet and a copy of the transfer to [email protected] or by Fax: +34934021297
Others
3rd Cold Gas Spray Summer School
Innovation Workshop
