3 N95 Filtering Facepiece Respirators For Hospitals and other Health Care Settings

• Universal size that fits most faces and shapes

• Individually packaged in sealed pouches

• 1870 meets the ASTM’s† highest level of fluid and splashresistance and reduces the risk of wearer contact withblood and body fluids

• 3M-patented Advanced Electret Media helps to makebreathing easier and cooler

• Fibreglass free and no components made from naturalrubber latex

• Cool Flow™ exhalation valve, for easy exhalation and cool,dry comfort (9211)

• Meets Health Canada, CDC and WHO guidelines forexposure control of Mycobacterium tuberculosis (TB) andSevere Acute Respiratory Syndrome (SARS)

• Lightweight construction promotes greater worker comfort

• 3M-patented Advanced Electret Media helps to makebreathing easier and cooler

• 1860 meets the ASTM’s† high level of fluid and splashresistance and reduces the risk of wearer contact with bloodand body fluids

• Fibreglass free and no components made from naturalrubber latex

• Meets Health Canada, CDC and WHO guidelines forexposure control of Mycobacterium tuberculosis (TB) andSevere Acute Respiratory Syndrome (SARS)

• Small cone style respirators have the same features as theregular cone style respirators as listed above

• Designed to fit comfortably on small faces

Flat-Fold/Three Panel Respirators

Cone Style Respirators

Cone Style Respirators (Small)

92101870

9211

18608210

1860S8110S

0312SK18655E_MFR Sell Sheet 4/21/04 11:50 AM Page 1

3M and Air-Mate are trademarks of 3M. Used under license in Canada. © 3M 2003 0312-SK-18655-E

33M Occupational Health and Environmental Safety3M CanadaPost Office Box 5757London, Ontario N6A 4T1

www.3M.com/CA/occsafety

3M Medical Markets3M CanadaPost Office Box 5757London, Ontario N6A 4T1

www.3M.com/CA/IP

For Technical Assistance: 1-800-267-4414

*NIOSH respirator filter efficiency for an N95 is at least 95% filtrationefficiency against solid and liquid aerosols that do not contain oil. Testingfor this is done against particles approximately 0.3 micron in size (massmedian aerodynamic diameter) per 42 CFR 84. For further details onfiltration theory, ask your 3M representative for a copy of an articleentitled “Filtration Mechanisms of Particulate Respirators”.

† The ability of the respirator material construction to minimize fluids fromtravelling through the material and potentially coming into contact withthe user of the respirator. Fluid resistance helps reduce potential exposureto blood and body fluids caused from splashes, spray or spatter. TheAmerican Society of Testing and Materials is a non-profit organizationthat develops standard testing methods by the consensus of volunteersfrom manufacturers, users, and others. The fluid resistance test conductedon the above respirators is ASTM F 1862.98, resistance to Penetration bySynthetic Blood.

Respirators are designed to reduce exposure of the wearer to airborne hazards. Biological agents, such as bacteria or viruses, are particles and can befiltered by particulate filters with the same efficiency as non-biological particles having the same physical characteristics (size, shape, etc.). However, unlikemost industrial particles there are no exposure limits, such as Permissible Exposure Limit (PEL®), Threshold Limit Value (TLV®), or OccupationalExposure Limit (OEL) established for biological agents such as TB. Respirators may help reduce exposures to airborne biological contaminants, but theydon’t eliminate the risk of exposure, infection, illness, or death.

Cat. No. Description Units/Box Boxes/Case Total

1870 N95* flat fold particulate respirator 20 6 120and surgical mask with fluid andsplash resistance

9210 N95* flat fold particulate respirator 20 12 240

9211 N95* flat fold particulate respirator with valve 10 12 120

1860 N95* particulate respirator with fluid and 20 6 120splash resistance

8210 N95* particulate respirator 20 8 160

1860S N95* particulate respirator with fluid and splash resistance (small) 20 6 120

8110S N95* particulate respirator (small) 20 8 160

3M Filtering Facepiece Respirators

FT-10 and FT-30 Qualitative Fit Test KitsThe FT-10 and the FT-30 fit test kits meet the requirements and specifications for fit-testingusers of air purifying respirators as documented by CSA Standard Z94.4-02: Selection, Useand Care of Respirators.Each fit test apparatus contains:• One Hood • One collar assembly• Nebulizer #1 (sensitivity) • Nebulizer #2 (fit test)• Two sets replacement nebulizer inserts • Sensitivity solution (#1)• Fit test solution (#2)

0312SK18655E_MFR Sell Sheet 4/21/04 11:50 AM Page 2