3M Solutions for the Automotive Electronics Industry SOLUTIONS FOR AUTOMOTIVE ELECTRONICS INDUSTRY...

download 3M Solutions for the Automotive Electronics Industry SOLUTIONS FOR AUTOMOTIVE ELECTRONICS INDUSTRY Labelling

of 14

  • date post

    21-May-2020
  • Category

    Documents

  • view

    5
  • download

    0

Embed Size (px)

Transcript of 3M Solutions for the Automotive Electronics Industry SOLUTIONS FOR AUTOMOTIVE ELECTRONICS INDUSTRY...

  • 3M Solutions for the Automotive Electronics Industry

  • 10. Labels for headlights

    11. Battery labels

    12. Labelling on the turbo charger

    13. Barcode labels for the gearbox

    14. Gear unit labelling

    15. Decal information labels in the engine compartment

    16. Labelling for brakes

    17. Airbag warning signs

    18. Front lining for function buttons

    19. Vehicle type signs

    20. VIN-labels for the vehicle identification number

    21. Tyre pressure labels

    Labelling systems for the Automotive Industry

    Coating and Cleaning Solutions

    1. High Temperature resistant labelling of the printed circuit board

    2. Heat management in the engine compartment

    3. Shielding in the dashboard area

    4. Adhesion of dashboard systems

    5. Solderless connection for the steering arm control

    6. Adhesion of the lighting systems

    7. Adhesion of the sensor-systems

    8. Electrical connection of the handlebar sensor

    9. Heat management in the engine compartment

    Adhesive Solutions for Automotive Electronics

    Content

  • SOLUTIONS FOR THE AUTOMOTIVE ELECTRONICS INDUSTRY

    One Resource. Hundreds of Products. Unlimited Solutions.

    3M Electronics Markets Materials Division brings exceptional technical and design

    capabilities to the creation of materials solutions for highly demanding and

    dynamic automotive industry.

    These solutions involve adhesives, tapes, marking systems, abrasives,

    specialty chemicals and coatings. They serve a broad range of

    applications that result in improved manufacturing processes,

    higher quality electronics components, enhanced productivity,

    and reduced environmental impact. To help assure these

    successful outcomes, engineers at a global network of

    3M Application Development Centers design solutions for our

    clients. Comprehensive expertise makes 3M a start-to-finish

    resource for meeting a vast array of challenges in the electronics

    industry.

    • Thermal Management

    • EMI/RFI Shielding

    • Product Identification

    • Cleaning

    • Lapping, Polishing, and Planarization

    • Product Security and Protection

    • Packaging and Shipping

  • Higher integration densities of electronic components

    and the resulting greater waste heat generation

    require appropriate heat management in automotive

    electronics, the new core competency of car manu-

    facturers. A further consideration to accommodate as

    many components as possible in ever-decreasing

    spaces often makes soldering impossible. 3M can help

    you to solve these new requirements efficiently and

    economically.

    Adhesives solutions for Automotive Electronics

    10

    9

    13

    11

    12

    Heat management in the engine compartment

    High temperature resistant labelling of the printed circuit board

    Barcode labels for the gearbox

    Labels for headlights

    Battery labels

    Labelling on the turbo charger

    Gear unit labelling

  • 7

    19

    6

    5

    18

    15

    16

    4

    1

    3

    8

    17

    2

    20

    14

    Heat management in the engine compartment

    Adhesion of the dashboard systems

    Adhesion of the lighting systems

    Adh sens

    Shielding in the dashboard areaFront lining for

    function buttons

    Decal information labels in the engine compartment

    Labelling for brakes

    VIN-labels for the vehicle identification number

    Airbag warning signs

  • Labelling systems for the automotive industry

    The constant optimisation by car manufacturers in

    vehicle development and manufacture requires innovative

    marking systems.

    3M offers versatile solutions for the manufacture of signs

    and labels for sticking onto a variety of surfaces and

    for the most demanding applications.

    Our know-how enables us to offer our customers

    tailor-made solutions and meet individual requirements.

    21

    esion of the sor-systems

    Electrical connection of the handlebar sensor

    Solderless connection for the steering arm control

    Vehicle type signs

    Tyre pressure labels

  • Coating and cleaning solutions for Automotive Electronics

    Cleaning

    3M™ Novec™ Engineered Fluids are used in a wide variety of

    electronics cleaning applications, including vapor degreasing,

    immersion, aerosol spray cleaning and hand wiping. Cleaning

    systems incorporating Novec fluids help you address environmental

    and worker safety concerns-while offering excellent cleaning performance.

    • Extremely low surface tension and viscosity to penetrate under surface mount devices.

    • Non-corrosive and compatible with sensitive substrates

    • Can be used in existing vapor degreasing equipment

    • Reduced emissive and drag-out losses

    • "Cost-in-use" comparable to other solvent systems

    • Fast drying

    • Selective solvency

    • Low water solubility

    Fluorochemical Coatings

    3M™ Novec™ Electronic Coatings provide protection from moisture, soils,

    humidity and other environmental contaminants for many electronic

    components. They are fluorochemical acrylate polymers that are surface

    modifiers and provide very thin coatings for anti-migration, anti-stiction and anti-corrosion. Used on printed

    circuit boards, MR heads in disk drives, and sensitive electronic components, they can offer:

    • Improved reliability

    • Extended life of the product

    • Reduced process time

    • Excellent environmental and safety properties

    3M™ Novec™ ECG-1700 fluid has been formulated to replace 3M™ Flurorad™ FC-722, FC-732, FC-724

    and FC-725™ fluids, and to meet the purity solvent demands of the electronics industry.

  • Heat management in the engine compartment

    Heat management with high Temperature resist- ant and doubled- sided thermally conductive tape.

    Adhesive solutions for Automotive Electronics

    2

    Adhesion of the sensor-systems

    Efficient adhesion of the sensor-systems with UV-screen printable adhesive.

    3M™ SP-7514 UV adhesive

    7

    Shielding in the dashboard area

    Shielding with electrically conduc- tive adhesive tape.

    3M™ 9713 tape

    3

    Solderless connection for flex to PCB

    Solderless connec- tion of a flexible circuit to a rigid board using electri- cally conductive adhesive film (ACF)

    3M™ 5460 R adhesive film

    5

    Adhesion of dashboard systems

    Efficient adhesion of the rear glossy / shiny dashboard systems with UV-screen printable adhesive.

    3M™ SP-7514 UV adhesive

    4

    Attachment of handlebar sensor

    Attachment of flex circuit for door handlebar sensor

    3M™ VHB™ 9460 tape

    8

    Heat management in the engine compartment

    Adhesion of heat sinks in heat inten- sive environment with a high Temperature resist- ant adhesive.

    3M™ VHB™ 9082 tape

    9Adhesion of the lighting systems

    Adhesion of LED-lighting and lighting systems.

    3M™ VHB™ 9469 tape

    6

    High temperature resistant labelling of the printed circuit board

    Identification of circuit boards prior to the lead-free soldering process with high Temperature resistant labels.

    3M™ 3922 DSL label

    1

  • SOLUTIONS FOR AUTOMOTIVE ELECTRONICS INDUSTRY

    Labelling systems for the Automotive Industry

    Labels for headlights Aluminium- covered polyester foil for labelling of different types of headlights. Temperature resist- ant and durable against aggressive substances in the engine compartment.

    10

    Battery labels With transparent protective foil from polyester. Resistant against acids and aggressive detergents.

    11

    Barcode labels for the gearbox Cast PVC-foil with thicker adhesive application for rough and struc- tured surface. Oil, solvent and temperature resistant.

    13

    Labelling for brakes Foil out of cast PVC – oil, temperature and solvent resist- ant. The variable inscription imprint- ed during the ther- mo transfer process stays readable even under extreme strains.

    16

    Vehicle type signs Double-layer-acrylate foils (black/white). Inscribable by means of laser beam – destructible, durable, tempera- ture and UV resistant. Fulfils the legal requirements set by the Federal Office of Motor Vehicles.

    19

    Tyre pressure labels Flexible PVC-foils with excellent adhesive strength. Labels made out of this foil cannot be transferred to another subsurface.

    21

    Front lining for the function buttons Different self-adhe- sive covers allow the assembling of flexible electronic buttons and switch- es for certain com- mand functions (specific in the area of armature table).

    18

    Airbag warning signs Security foil from polyester. Special adhesive for low energy surface areas. Refer to the demounting interdiction and manufacturer’s guarantee.

    17

    VIN-labels for the vehicle identification number Double-layer-acrylate foils (black/white). Inscribable by means of laser beam – destructible, durable, tempera- ture and UV resistant.