3d print
1
MODELING 01. MODEL THE SHAPE YOU WANT USING [RHINOCEROS 4] 02. DESIGN A PLANAR SURFACE PATTERN + [EXTRUDE] 03. USING [ARRAY] REPEAT THE PATTERN IN X + Y AXIS. 04. [JOIN] ALL THE PATTERN PIECES PAYING ATTENTION TO GAPS. 05. WITH [FlowAlongSrf] LET THE PATTERN FLOW ALONG THE SURFACE YOU CREATED AT THE BEGINNING. PRINTING 01. EXPORT MODEL AS .STL 02. PLOT IN THE 3D PRINTER [SPECTRUM Z510] 03. AFTER THE MODEL IS FINISHED *It takes about 8 hours to complete the printing process. 04. removE THE excess OF material using brushes and compressed air in a special booth. 01 02 03
-
Upload
albarene-basilis -
Category
Documents
-
view
214 -
download
0
description
3d print, fablab, iaac
Transcript of 3d print
MODELING
01. MODEL THE SHAPE YOU WANT USING [RHINOCEROS 4]02. DESIGN A PLANAR SURFACE PATTERN + [EXTRUDE] 03. USING [ARRAY] REPEAT THE PATTERN IN X + Y AXIS.04. [JOIN] ALL THE PATTERN PIECES PAYING ATTENTION TO GAPS.05. WITH [FlowAlongSrf] LET THE PATTERN FLOW ALONG THE SURFACE YOU CREATED AT THE BEGINNING.
PRINTING
01. EXPORT MODEL AS .STL02. PLOT IN THE 3D PRINTER [SPECTRUM Z510]03. AFTER THE MODEL IS FINISHED *It takes about 8 hours to complete the printing process.04. removE THE excess OF material using brushes and compressed air in a special booth.
01 02 03
