35L Refuelling Pump DIESEL Sliding Vane Pumps · PDF fileAvailable in 12v & 24v models, the...
Transcript of 35L Refuelling Pump DIESEL Sliding Vane Pumps · PDF fileAvailable in 12v & 24v models, the...
William Clark & Son (Parkgate) Ltd I Parkgate I Dumfries I Scotland I DG1 3NB
Jabsco Refuelling PumpsENGINEERING
Tel: 01387 860241Fax: 01387 [email protected]
Page 1
Diesel refuelling pump suitable for refuelling of forestry and agricultural, off-road vehicles, excavators, other construction plant and generators. Duty time 30 mins at +30°C ambient. Self priming up to 2.8 metres. Flow 35 litres per minute at 3 metres head. Maximum head 6 metres. Available in 12v or 24v.
Heavy duty refuelling pump suitable for equipment and vehicles with tanks between 100 and 400 litres. Duty is continuous up to 40°C ambient. Self priming up to 3 metres dry (4 metres wet). Flow 50 litres per minute at 3 metres head. Maximum head 6 metres. Available in 12v or 24v.
A reliable, dirt tolerant, flexible impeller pump used in the forest industry for draining and filling gearbox and axle bogey oils. The utility pump offers a flow of 35 litres per minute. Fitted with 1” BSP internal thread fittings, the pump comes complete with a 2 metre long 110v supply cable.
DIESEL
DIESEL
GEAR OIL
110v 53040-2103
12v 23870-1200 24v 23870-1300
12v 24vVR050-1022 VR050-1122
35L Refuelling Pump
50L Refuelling Pump
Heavy duty refuelling pump suitable for use on large diesel powered equipment where high flow rates and priming heights are required. For tank capacities between 400 and 1500 litres. Duty time is 40 minutes at an ambient temperature of 30°C. Self priming 4 metres dry (5 metres wet). Flow rate is 100 litres per minute at 3 metres head. Maximum head 6 metres. Available in 24v.
DIESEL
24v VR100-1122
100L Refuelling Pump
110v Utility Pump
Available in 12v & 24v models, the hydraulic oil transfer pump offers flows up to 26 litres per min and is the ideal pump for filling forest machine hydraulic oil and chain oil tanks.
23590-201012v 24v 23590-2110
HYD. OILHydraulic Oil Transfer Pump
Sliding Vane PumpsThese Jabsco pumps utilise the well proven sliding vane principle. Whenever the application demands a reliable pump with no elastomeric moving parts, a sliding vane pump is ideal. Especially suitable for the transfer of diesel fuel and hydraulic oils.
Durable • Wide Temperature Range Self Priming • Field Proven
William Clark & Son (Parkgate) Ltd I Parkgate I Dumfries I Scotland I DG1 3NB
ENGINEERING
Tel: 01387 860241Fax: 01387 [email protected]
Page 2
Jabsco Refuelling Pumps
DIESEL Fuelmaster 40 Refuelling Kit
24v
12v 50140-0000
50140-0100
DIESEL
A complete pump system for static applications. Supplied complete with auto switch off gun, resettable fuel meter and main on/off switch. Available in 240v and 110v, 50 litres per min pump. Only suitable for use with diesel fuel.
110v Refuelling Pump System RPS-110
240v Refuelling Pump System RPS-240
Wall Mounted Refuelling Pump
Gear Pump
12v 23230-2012 24v 23230-2024
GEAR OIL
Available in 12v or 24v, the Jabsco Gear Pump is ideal for pumping heavier oils such as chainsaw oil, engine oil etc. Can be used with or without the supplied mesh filter.
This portable diesel refuelling kit is the perfect solution for rapid refuelling of vehicles anywhere. Powered from the vehicle battery, this pump will transfer 100 litres of diesel in just 3 minutes. The kit comprises: Diesel Refuelling pump, hoses, trigger nozzle, strainer, electrical cable with battery clips and carrying/storage frame.
Utilising the twin meshing gear principle, where one gear is driven and the other follows, oil is transferred around the periphery of the housing between the gear teeth and discharged from the outlet port under pressure. Ideal for pumping both light and heavy oils at low flows.