344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7...PV Elite Strength calculation Thermal...
Transcript of 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7...PV Elite Strength calculation Thermal...
344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7www.lprglobal.com | www.uskoreahotlink.comTel.: +1 416-901-5591E-Mail: [email protected]
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
01 Steam Drum Manufacturing Capability and Certificates
Certificates and Major Clients
Materials, Dimensional Capability Design Software
02 Steam Drum Project Experiences
Surface Condenser
Steam Drum
Manufacturing Equipment
Steam Drum Manufacturer Ulp
Major Clients
Ulp is a globally recognized manufacturer of Steam Drum based in S.Korea. Ulp’ssteam drum receives generated steam from boiler, separate into vapour and allow only the steam to be sent to power generation turbines. These steam drums are most commonly used in cogeneration power plants globally.
Our molding technology for advanced plates over 150 mm as well as advancedwelding technology of thick plates without defects or deformation is what gives us theadvantage in design and manufacturing of steam drums. More over, whatdifferentiates our steam drums is smaller volume that gives 3 advantages to users –smaller installation space, lower manufacturing cost, and installation cost.
More than 80% of manufacturing and fabrication are performed in house, and we have a dedicated manufacturing engineering team for our steam drum business only, with a quality assurance team to produce steam drums with close to zero defect rate. Our competitive quality, price and lead time and engineering experience is what brings our clients back.
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
Certificates
• ISO 9001• ISO 14001• OHSAS 18001• ISO 3834 – 2 (EN Certification)• LLOYD CLASS 1• China ML Certificate for Boiler Drum
• Certificate of Manufacture Registration of Cylinder (Refrigerator & Specific Equipment)
• ASME – U• ASME – U2• ASME – S• ASME – PP
Manufacturing Capability
Material• Carbon Steel• HIC Material• Clad Steel• Stainless (Duplex, 904L stainless Steel)• Cr-Mo Steel• Cu-Ni Steel• Cu Alloy• Ni Alloy Steel (Hastelloy)• Titanium
Size & Weight • Max Diameter: 8,000 mm• Max. Thickness: 180mm
Annual capacity• Equipment: 14,400 Ton/year• Harp & Module: 9,600 Ton/year
Design Software
MechanicalCalculation
Compress For strength calculation
PV Elite Strength calculation
Thermal Calculation HTRI Heat exchanger thermal calculation
Analysis ANSYS Work Bench FEA, Fatigue Analysis
2D Design Program Auto Cad Drawing
Cutting & Piercing Program
CNC Program for cutting & piercing hole with accuracy.
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
Steam Drum Manufacturing and Inspection Equipment
Description Size Set
Drilling Machine JD-1650 1
Plasma Cutting Machine TW-120A 1
Bench Machine GY-360 1
High Pressure Washer 440V, 220V 2
Turn Table S-300, SH-150 1
Tube Expander - 1
Boiler 2035RTGBON-500GBON-250G
3
Compressor 100HP, 10HP 3
Flux Collector JY-3056 2
Overhead Crane 100 ton, 17 m 2
30/10 ton, 12m 2
30 ton, 12m 3
20 ton, 12m 2
Gantry Crane 60 ton, 20m 1
Semi Gantry crane 70/10 ton, 12m 1
70 ton, 12m 1
20 ton, 12m 2
Arc Welding Machine 450A 6
Auto-Welding Machine DC-1000A 2
CO2 Welding Machine Auto 600M 18
TIG Welding Machine Alphai 500A 8
Inverter TIG Welding Machine 200A 1
Inverter Arc Welding Machine 250A 1
Electric Forklift 2.5 ton 2
Diesel Forklift 7 ton 1
Turning Roller 200 ton 4
100 ton 6
50 ton 5
30 ton 6
Inspection Equipment Size Set
Hydraulic Test 220V 3 phase current 1
Coating Thickness Gauge
0-3000 μm 1
Ultrasonic Thickness Gauge
100mm/ 0.01mm 1
Clamp on Hitester DC: 400mV – 1000V 1
AC: 4V – 600 V 1
Cylinder Gauge 10-18.5mm / 0.01mm 1
18-35mm / 0.01mm 1
Digital Thermometer -40.0 ~ 600.0 1
Dial Gauge 10mm / 0.01mm 2
Dead Weight Tester 0.5 – 100Kgf / cm² 1
External Micrometer 25-50mm / 0.01mm 1
0-25mm / 0.01mm 1
Roughness Tester 0-2000μm 1
Pressure Gauge 250 bar 4
700 bar 4
Pressure Recorders 0-50Kgf / cm² 2
Torque Wrench 0-1000Kgf x cm 1
Tension / Compression Testing Machines
0-490.3 KN 1
Impact Tester 490.33 J 1
Hardness Tester HIC 10 1
Vernier Calipers 300mm / 0.05mm 1
150mm / 0.05mm 1
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
Steam Heavy Wall Drum Project Overview
Trans Canada Project
Location: CanadaClient: Volgot Power Project Time : 2015 MaySize: 165t x ID 2,133 x 13,411LUnit Weight: 147.5 ton (HP)Quantity: 2 unitMaterial: SA299-B
Duke Citrus Project
Location: USAClient: Volgot Power Project Time : 2015 JuneSize: 148t x ID 1,981 x 14,021LUnit Weight: HP 132.5 Ton Quantity: 4 unit (4HP, 4IP, 4LP) Material: SA299-B
Yeosu #1 Project
Location: S.KoreaClient: Doosan Heavy Industries & Construction Co., Ltd. Project Time: 2014 JulySize : 135t x ID 1,676 x 34,000LUnit Weight: 246 Ton Quantity: 1 unitMaterial: SA302-C
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
Steam Drum Project Experience
Samson Project
Location: TurkeyClient: Doosan Heavy Industries & Construction Co., Ltd.Project Time: 2009 JuneSize: 148t x ID 2,184 x 17,800LUnit Weight: HP 167 Ton / LP 18 Ton / LP 26 Ton Quantity: 2 units (2HP, 2IP, 2LP)Material: SA302-C / SA516-70
Bouchain Project
Location: FranceClient: CMIProject Time: 2013 OctoberSize: 132t x ID 2,201 x 11,260LUnit Weight: HP 172.3 Ton / IP 26.2 Ton / LP 27.7 TonQuantity: 1 unit (1HP, 1IP, 1LP, 1BDT, 1FST) Material: SA302-B
Hamitabat Project
Location: TurkeyClient: CMIProject Time: 2016.02.16Size: 125t x ID 1,890 x 13,530LUnit Weight: HP 110 Ton Quantity: 2 units (2HP, 2IP, 2LP)Material: SA302-B
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
Steam Drum Project Experience
St. Joseph Project
Location: USA Client: Nooter Erikson Project Time: 2016 OctoberSize : 102t x ID 1,524 x 13,259LUnit Weight: 68.8 Ton Quantity: 2 unit (2HP, 2IP, 2LP) Material: SA302-B
KAIS Project
Location: AlgeriaClient: Nooter EriksonProject Time: 2016 OctoberSize: 77t x ID 1,397 x 13,800LUnit Weight: 50.8 Ton Quantity: 4 unit (4HP, 4IP, 4LP) Material: SA516-70
Kalsel Project
Location: IndonesiaClient: SumitomoProject Time: 2016 AugustSize: 138t x ID 1,524 x 13,800LUnit Weight: 83.1 Ton Quantity: 1 unit (1HP)Material: SA516-70N
+1 416-901-5591 | [email protected] | www.lprglobal.com | Product Webpage
344 Bloor Street West, Suite 607, Toronto, ON M5S 3A7
www.lprglobal.com | www.uskoreahotlink.com/
Tel.: +1 416-901-5591
E-Mail: [email protected]
LPR GLOBAL Inc.
Your connection to Korean manufacturing and industrial equipment