31 Service Manual - Packard Bell -Easy Lite Versa Lite
-
Upload
soporte-tecnico-buenos-aires -
Category
Documents
-
view
232 -
download
0
Transcript of 31 Service Manual - Packard Bell -Easy Lite Versa Lite
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
1/14
www.SoporteTecnicoBsAs.com.ar
Repuestos para tus equipos.
Al mejor precio.
Envios a Todo el Pais
http://www.soportetecnicobsas.com.ar/http://www.soportetecnicobsas.com.ar/http://www.soportetecnicobsas.com.ar/http://www.soportetecnicobsas.com.ar/http://www.soportetecnicobsas.com.ar/ -
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
2/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 1 of 13, MS
Product: Packard Bell Easy LiteNEC/ZDS Versa Lite
SYSTEM DISASSEMBLY INSTRUCTIONS
Before starting the disassembly take notice of the ESD warning below.
Warning! All the components in the computer can be damagedby static electricity (E.S.D. - Electro Static Discharge).
Discharge yourself and any tool you use to ground
(e.g. computer chassis) before touching or removing
a component. Place removed components in anti-
static bags.
Battery and Hard Disk Drive Removal
1- Turn over the unit, unlatch the battery by shifting the two clips (Picture below, Item A) andremove it.
2- Instructions for removing the hard disk drive:a- Remove the two screws (Picture below, Item B) of the hard disk cover.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
3/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 2 of 13, MS
b- Take off the hard disk drive (HDD) cover.c- Lift the drive out and carefully disconnect the flatcable and take away the drive.
d- Disconnect the HDD flatcable from the mainboard by removing the caution label with apair of tweezers and carefully unlocking the cable.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
4/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 3 of 13, MS
Removing the Keyboard
1- Remove the two screws at the corner of the base (location shown in the picture).
2- Turn over the unit, open the LCD panel and remove the two hinge caps by shifting themsidewards.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
5/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 4 of 13, MS
3- Lift the keyboard a little with a flatbed screwdriver and unlock the three spring latchesbetween the and keys, the and keys, and the and keys.
1- Unlock the connector, free the keyboard cable and take away the keyboard.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
6/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 5 of 13, MS
Taking Off the LCD Panel
1- Remove the five screws that secure the speaker cover.2- Remove the speaker cover.
3- Remove the harness cap that covers the cable leading from the mainboard to the LCDpanel (see picture). You may want to use a flatbed screwdriver.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
7/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 6 of 13, MS
4- Remove the screw that secures the LCD connector.5- Disconnect the LCD connector.6- Take away the LCD panel from the base unit.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
8/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 7 of 13, MS
LCD Panel Disassembly
1- First remove the four rubber pads that cover the screws of the display panel. Thenremove the four screws. Take notice that the two top screws differ from the two bottomscrews.
2- Carefully peel the display bezel of the LCD module and remove the cover latch. This latchconsists of the LCD hook (metal), the LCD hook button (plastic) and LCD hook spring.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
9/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 8 of 13, MS
3- Remove the four screws that secure the LCD panel.
4- Remove the screw that secures the hinge on the right side and remove the hinge itself.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
10/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 9 of 13, MS
5- Insert a flatbed screwdriver between the Inverter and the panel and release it by lifting it.This allows you to take out the LCD screen together with the inverter.
6- To remove the Inverter disconnect the two cables that connect the screen to the inverter.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
11/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 10 of 13, MS
Removing the CPU Module
1- Carefully remove the two screws that secure the CPU module.2- Disconnect the CPU holding clip that is fastened by a screw in the area marked by B.3- Take out the module by disconnecting the two connectors under the module in the area
marked by A.
Removing the Memory Module (if applicable)
1- Pull the memory latches outwards to release the memory module and take it out.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
12/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 11 of 13, MS
Removing the Upper Cover
1- Remove the four screws on the upper cover.
2- Turn over the unit and remove the two screws in the hard disk drive compartment.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
13/14
Disassembly/ re-assembly instructions Easy Lite / Versa LitePackard Bell NEC Europe, version 1.0, 18-05-99, Page 12 of 13, MS
3- Now turn the unit back over again and, carefully, disconnect the three cables connectingthe touchpad, the touchpad buttons and the internal microphone to the mainboard.
4- Apply inward force to the four points indicated to release the upper cover. You might wantto use a flatbed screwdriver to release the clips on the indicated positions from the inside.
-
8/8/2019 31 Service Manual - Packard Bell -Easy Lite Versa Lite
14/14
Disassembly/ re-assembly instructions Easy Lite / Versa LiteC S
Removing the Mainboard
1- Remove the three screws of the mainboard.2- Remove the fan while taking notice of its position (there is a small arrow visible on the top
right corner of the fan).3- Take out the mainboard.
SYSTEM RE-ASSEMBLY INSTRUCTIONS
Reassembly is the reverse of the disassembly process. Use care to insure that the cables andscrews are returned to their proper positions.