3080IPSR Datasheet - Evertz Microsystems · • MAC fi ltering/security • QoS – 802.1Q/p Class...
Transcript of 3080IPSR Datasheet - Evertz Microsystems · • MAC fi ltering/security • QoS – 802.1Q/p Class...
-
The
Com
ple
te S
olu
tion
Pro
vid
er
Protocol FeaturesLayer 2 Features• L2 Bridging – based on 802.1D Standard• Spanning Tree Protocol (STP) - 802.1d• Rapid Spanning Tree Protocol (RSTP) - 802.1w• Multiple Spanning Tree protocol (MSTP) - 802.1s• Virtual LANs (VLAN) tagging and VLAN trunking 802.1Q• Port-mirroring (SPAN)• Link Aggregation Control Protocol (LACP) - 802.3ad• Jumbo frames – 9216 bytes• 802.1AB Link Layer Discovery protocol LLDP• IGMP v1,2,3 Snooping• MAC fi ltering/security• QoS – 802.1Q/p Class of Service (CoS) support• 802.3x Flow Control
Operation, Administration and Maintenance (OAM)• SNMP (Evertz VLPro)• 10/100 Management port• RS-232 Console• Telnet and SSH• Syslog• Industry standard CLI • Standard Evertz Web interface for upgrade
Layer 3 Features• Routed ports• Switch Virtual Interface (SVI)• Layer 3 forwarding:• Between routed ports• Between VLANs• Static routes.• Default IP routes / Default gateway• Dynamic routing protocols• OSPF• ISIS• BGP• QoS – Differentiated Services Code Point (DSCP) support• QoS Toolsets: • Classifi cation and Marking tools • Policing and Markdown tools • Scheduling tools• Dual-stack (IPV4 and IPV6 coexistence)• IPv6 dynamic routing protocols
The new 3080IPSR is a hybrid layer 2 / layer 3 Ethernet switch device built using the fundamental principles of pure SDN. It can be used for building IP device management LANs or is also intended to be deployed alongside other packet based Evertz products, in context of multimedia delivery applications.
The 3080IPSR is an enterprise class device that can be integrated in different size topologies due to its fl exible confi guration from 16 to 64 ports running at 1GE/10GE speeds.
The 3080IPSR product is a switch capable of forwarding MAC and IP frames at line rate for all packet sizes from 64 byte to Jumbo 16k (for MAC) and 9k (for IP) respectively.
In Hybrid setup an Ethernet port can be part of either IP routing domain or Ethernet switching domain.
3080IPSR introduces a new software licensing model that allows the operator to Pay-as-you-grow. This enables them to activate new features incrementally. Layer 2 and 3 features on the 3080IPSR will be come available when activated by a license key.
Ethernet ports are associated with the routing domain. The routing domain represents all of the IP level rules that describe packet forwarding based on destination IP address. The Routing / Forwarding rules can be installed manually in a static confi guration or by running a routing protocol such as OSPF. Any local interface also defi nes L3 routing rules by default.
In bridging mode MAC frames are forwarded in a topology defi ned by a Bridge or VLAN. VLANs ensure the traffi c separation between different sub networks and restrict the broadcast fl ooding domain to a limited set of interested devices.
Rev. 15-1
Multi-layer Ethernet Switch3080IPSR
Usability Features and Benefi ts
NMS• Tightly integrated with VistaLINK PRO for graphical confi guration and
monitoring• Single NMS for both management network and broadcast data path
elements • Pass fault information to Magnum/VUE control surfaces for operator
presentation
Operations Admin Maintenance• Full Integration with Evertz VistaLINK PRO NMS (Graphical GUI)• SNMP v1/2/3 support (Evertz enterprise and Standard RFC MIBs supported)• Industry Standard CLI (Command Line Interface)• HTTP web browser based confi guration
Broadcast Application and Product Synergies• Create advanced Management Networks for Evertz elements• Add additional monitoring power to existing management networks • Integrate with SDVN (Magnum) architectures for interfacing to standard IP
networks• Intuitive graphical switch setup including L2 VLAN confi guration
-
Specifi cationsLatency: 2.5 us
Control Systems: VistaLINK PRO NMS VistaLINK PRO CSM MAGNUM VUE
Physical (number of slots):3000FR, 3700FR 2 slots for 16, 32 port 4 slots for 64 portEMX3-FR, EMX6-FR 2 slots for 16, 32 port 4 slots for 64 port
EnclosuresEMX1-FR EMX 1RU Router Chassis with 2
slots, supports 1x 3080IPSREMX3-FR EMX 3RU Router Chassis with 5
slots, supports 2x 3080IPSR3080IPSR-FR
Rev. 15-1
Multi-layer Ethernet Switch3080IPSR
Ordering Information
Part Number 1GE Ports 10GE Ports Total Licensed Bandwidth Description
3080IPSR-16-10G 16 160
Modular Switch/Router with licensable Layer 2, 3 protocol
support.
3080IPSR-32-10G 32 320
3080IPSR-64-10G 64 640
3080IPSR-16GE 16 16
3080IPSR-32GE 32 32
3080IPSR-64GE 64 64
3080IPSR-12GE-4x10G 12 4 52
3080IPSR-30GE-2x10G 30 2 50
3080IPSR-60GE-4x10G 60 4 100
3080IPSR-FK-10GE-4 4 40Upgrade Feature License to convert/enable 4 GE ports to
10GE
* Call factory for compatible SFP modules
3080IPSR
10.1.1.4/30
.5
.6
10.1.10.0/24VLAN 10
10.1.20.0/24VLAN 20
G4/1
G4/2 G4/3 G4/4
10.1.10.255INTERFACE
VLAN 10 (SVI)
10.1.20.1INTERFACE
VLAN 20 (SVI)
SWITCHPORT ACCESS
SWITCHPORT ACCESS
ROUTED PORT(NO SWITCHPORT)
10.1.10.142
10.1.10.244
10.1.20.123
3080IPSR
Example Application Architecture
User Interfaces
Application 1 Application 2
VPN A
3080IPSR
VPN_B10.2.0.0/16
Site 1
VPN_A10.6.0.0/16
Site 3
VPN_B10.3.0.0/16
Site 2
VPN_A10.4.0.0/16Site 1
VPN_A10.5.0.0/16Site 2
VPN_B10.4.0.0/16Site 3
Provider Edge
Provider
Provider
Provider
Provider
IPSR to ProviderEdge Peering
Private Routes ofVPN Customer A
Provider Edge
Provider Edge
Provider Edge
3080IPSR
3080IPSR
3080IPSR
3080IPSR
3080IPSR
Provider Network
VPN B
Private Routes ofVPN Customer B