3 - Locks for narrow stiles · » Cross key type cylinder. Locks are supplied with three keys. »...

LOCKS FOR NARROW STILES

2 3

LEADING THE IRONWORK LOCK SEGMENT

Among the products that have turned TESA into a global reference for security are our locks for narrow stiles. Thanks to the tests carried out in the lab, TESA’s locks for aluminium profi les present the highest resistance and the highest passive security, plus they easily beat the mark of 200,000 cycles. Which is why every time you install a TESA lock you are choosing a guaranteed solution for the door, providing it with the maximum security and resistance. Choose TESA for the highest security.

2 3

WHY DO INSTALLERS PREFER TESA LOCKS?

When it comes to aluminium-profi le locks, only one thing is more important for us than creating a top-security product: to make the ironwork installer’s job as easy as possible. That’s why our locks have been developed with the aim of allowing a quick and simple installation as well as an easy maintenance.Thanks to this, we have maintained our position as leaders of our segment in Spain, and this is the reason why in 2005 we manufactured in our plants more than 4’5 million locks for wood and aluminium.

GUARANTEED BY TESA

To purchase TESA products is a quality guarantee. All our locks have been certifi ed to the highest degree by the ISO 9001 Quality Standard, the ISO 14001 environmental standard, and the Security at Work and Occupational Hazard Prevention standard. For this reason, every time you purchase a TESA product you can be sure you are buying a top-quality product.

EASIER TO INSTALL, SAFER AND WITH BETTER PROTECTION

The latest models of locks incorporate 15mm-wide cases, thus minimizing the mechanizing of ribs.Also, a new range of escutcheons and strikes has been developed in order to bring higher security and to enable an easier installation of the locks.

WE BRING YOU AN INTEGRAL LOCKING SOLUTION

TESA brings you the widest range of products for

aluminium stiles, ranging from sliding locks to the latest generation of monopoint and multipoint PREMIUM locks with gear mechanism; from the swinging hook series to the panic exit locks for aluminium profi les. The great variety of backsets (up to 35mm) and the combinations of latches and bolts, along with a wide range of accessories, provides the user with the right technical solution for every locking problem.

GUARANTEED PROCESS

Our R+D department works hard to improve our production processes, offering the market newer and better products that meet the market’s increasingly demanding needs.For the manufacturing of its products, TESA uses stainless steel as the standard material for fronts and strikes. The other components have been protected with a nickel-plating process that ensures the durability of the components in outdoors installations.

4 5

PAG. 10PAG. 11

DOORCLOSERS

PAG. 22

HANDLES

PAG. 21

CYLINDERS

PAG. 22

SPECIAL STRIKES

PAG. 17

2

P

ESCUTCHEONS

PAG. 19

2

PA

2

PA

INDEX OF APPLICATIONS

SLIDING DOORS 2240 series SERIES

CHANNELLED ALUM. STILESSwinging bolt series

PAG.12 PAG. 14

FLAT TYPE2210D sliding deadbolt

EMERGENCY EXITS2280 series

ELECTRIC STRIKES

PAG. 16

4 5

2220 SERIES

PAG. 14

2230 L / P SERIES

PAG. 7

2210X SERIES

PAG. 9

2200 SERIES

PAG. 13

2230X - 2230U SERIES

PAG. 6

2210D AND 2210E SERIES

PAG. 12

2210B SERIES

PAG. 11

PAG. 14

2230 SERIES

PAG. 8

2240 SERIES

PAG. 10

2280 SERIES- PANIC EXIT

6 7

» Gear Mechanism · It allows a smooth operation of the

lock. · It reduces the risks of failure of the

lock. » Three independent locking points. · It is necessary to break the three

points one by one to force the lock. · Reinforced bolts. » The cases, with 15mm of wide, reduce the aluminium mechanization.» Flat profi le faceplate or “U” profi le faceplate. » Faceplate length of 2030mm.» Faceplate and strike plates made in stainless steel. » Nickel plated steel deadbolts and latch.» Nickel plated latch is reversible and can be retracted by handle or key.

PREMIUM LOCK, GEAR MECHANISM

3 lock points - sliding reinforced bolts

2230X - 2230U SERIES

OPTIONS

Backsets 25 30 35

Cylinder cam 15 mm

Latch Adjustable Anticard Narrow

Face plate Flat “ U”type

ACCESORIOS

Escutcheons E190 E205 E240

Strikes Inox Electric Adjustable

A=backset + 15 mm

174

A

793

85

311

2030

A

643

1100

174

A

ANTICARD LATCH

ADJUSTABLE LATCH

2230X / ULatch + Bolt

2231X / UBolts only

2236X / URoller + bolts

NEW

6 7

2230 L/PEntrance

door.Latch+hook.

2231Entrance door.Hook only.

2236Double actionentrance door. Roller + hook.

L: 29P: 33

18

14

10

20

24

1860

28

26

75

120

548

242

548

120

207

1860

174

55

85

34

L: 21/26P: 25/30/35

L: 34/39P: 38/43

12

26

56

30

50

12

29,5

26

P: 2,5L: 6

2230 LApplication in fl at stiles

2230 PApplication in channelled stiles

3 lock points - swinging hook lock

2230 L / P SERIES » Faceplate and strike plates made in stainless steel.» Nickel plated steel bolts, main hook and latch. » Nickel plated latch is reversible and can be

retracted by handle or key.» The hook in the main lock is built with two

tempered steel plates and reinforced swinging mechanism.

» Model 2230L is designed for fl at stiles. The connecting rods slide inside the U-profi le faceplate.

» Model 2230P is designed for channelled stiles. The connecting rods slide inside the stile channel.

» Three different functions available, see below.» Two E-190 cylinder oval roses included. (E210

escutcheon can be ordered optionally.» There is a complete range of special strikes for

the existing types of aluminium stiles in the market.

OPTIONS

Backset(L/P) 21/25 26/30 31/35

Cylinder cam 13 mm 15 mm

Latch Standar Adjustable Narrow

Front plate Flat “ U” type

ACCESSORIES

Escutcheons E190 E205 E210 E240

Strikes Inox T21 Electric Adjustable

�

�

�

��

��

��

��

8 9

MULTIPOINT SECURITY

2,5

26

56

25

20253035

33384348

85

34

174

2230Entrance door.

Latch+bolt.

2231Entrance door.Bolt only.

2236Double action entrance door. Roller + bolt.

2237Inactive doors.Top jamb & fl oor locking only.

swinging bolt + top jamb + fl oor locking points

2230 SERIES» Faceplate and strike plates made in stainless steel.» Nickel plated steel bolt with reinforced swinging

mechanism. » Bolt throw is 25mm. and top-jamb&fl oor throw is

15mm.» Nickel plated latch is reversible and can be

retracted by handle or key.» Distance between centres: 85mm.» Two threaded connecting rods for top-jamb and

fl oor locking by means of M8 threaded bars. The M8 threaded bars are not supplied.

» Top jamb and fl oor locking zones can be reinforced with hardened steel locking bolts that have an inner thread to match the M8 bars: PAB2230.

» Door installation can be enhanced by means of the GUARPOHC fl oor strike.

» 2237 model is the ideal option for inactive leaf locking in double leaf doors.

» There is a complete range of special strikes for the existing types of aluminium stiles in the market.

OPTIONS

Backsets 20 25 30 35


Latch Standar Adjustable Narrow

ACCESSORIES


Strikes Inox T21 Electric Adjustable

GUARPOHC

8 9

.

e

.

e

Gear mechanism

2210X SERIE

OPTIONS

Backsets 25 30 35

Cylinder cam 15 mm

Latch Adjustable Anticard Narrow

ACCESSORIES

Escutcheons E190 E205 E240


» Gear Mechanism · It allows a smooth operation of the lock. · It reduces the risks of failure of the lock. » The cases, with 15mm of wide,

reduce the aluminium mechanization.» Faceplate and strike plate made in

stainless steel. » Nickel plated steel deadbolt and

latch.» Nickel plated latch is reversible and

can be retracted by handle or key.

2210XLatch + Bolt

2211XBolts only

2216XRoller + bolts

ADJUSTABLE LATCH

ANTICARD LATCH

NEW

10 1

11,5

26

56

29,5

83,5

10

14

25,4

2,5

8

85

34

33

174

20/25/30/35

33/38/43/48

7,5

14

240225

5 7

25

2240Entrance door.Latch+hook.

2241Entrance door.Hook only.

2241CEntrance sliding

door.Hook only.

2246Doubleactionentrance door. Roller + hook.

Swinging bolt

2240 SERIES » Faceplate and strike plate made in stainless steel.

» Solid steel hook bolt includes two tempered steel plates and reinforced swinging mechanism.

» Nickel plated latch is reversible and can be retracted by handle or key.

» Distance between centres: 85mm.» Four different functions available, see below.» Two E-190 cylinder oval roses included.

(E210 escutcheon can be ordered optionally).

» There is a complete range of special strikes for the existing types of aluminium stiles in the market.

OPTIONS

Backset 20 25 30 35


Latch Standard Adjustable Narrow

ACCESSORIES


Strikes Inox T21 Electric

0 11

45

26

56

29,5

83,5

2,5

11,5

25

855

174

85

34

Backset

Backset + 15

14

24060,7

25

ø5,3

» Faceplate and strike plate made in stainless steel.

» Nickel plated steel bolt with reinforced swinging mechanism. Bolt throw: 25mm.

» Distance between centres: 85mm.» Seven different functions available, see

below.» Two E-190 cylinder oval roses included.

(E210 escutcheon can be ordered optionally).» There is a complete range of special strikes

for the existing types of aluminium stiles in the market.

E210 escutcheon

Mortise lock

Door leaf stile

Cylinder

T21 special strike for channelled stiles.

Door frame stile

SWINGING BOLT SERIES

Reinforced swinging mechanism

2210Entrance

door.Latch+bolt.


2214Latch + thumbturn.

2215Pass doorLatch only.


2218Double action Pass door. Roller only.

2219Entrance door. Key actuated latch.

2210B SERIES

OPTIONS

Backsets 20 25 30 35


Latch Standard Adjustable Narrow

ACCESORIES


Strike Inox T21 Electric Adjustable

12 1

» Faceplate and strike plate made in stainless steel.» Nickel plated steel deadbolt. » Nickel plated latch is reversible and can be retracted by

handle or key.» Distance between centres: 85mm.» Galvanised steel lock case.» Two anodised aluminium roses included . (E190 or E210

escutcheons can be ordered optionally.» The standard stainless steel strike is supplied with the

lock.

SLIDING DEADBOLT

2210EntrancedoorLatch+bolt.



2214Latch + thumbturn.

45

26

48,3

45,5

42,2

33

55

85

34

33

20/252,5

33/38

25ø 5,3

13,2

12,5

7,5

14

9

27,6

240

Anodised aluminiumroses

CA22 special strike.

Door leaf stile

Door frame stile

Cylinder

2215Pass doorLatch only.

2218Double action Pass door. Roller only.

2210E ,15 mm width

2210D AND 2210E SERIES

Backsets 20 25 20 25 30 35


Latch Standard Narrow Adjustable

ACCESSORIES

Escutcheon E190 E205


2210D 2210E

NEW

2 13

The multipurpose lock for sliding doors and windows.

» The hook is specially designed for sliding doors.

» Backset is 16,5 mm. Backset is measured from the faceplate interior to the cylinder & follower centre-line.

» Cross key type cylinder. Locks are supplied with three keys.

» Strike plate and a pair of key-guide plastic roses are standard equipment.

» Nickel plated faceplate, strike plate and hook. » Painted steel lock case.

Backset 16,5 mm

2270 SERIE

» Nickel plated faceplate, latchbolt, deadbolt and cylinder.

» Latchbolt is reversible.» Oval cylinder cam has

10,7mm. radius to prevent interference with the stile bottom

» Distance between centres: 70mm.

» Strike and roses are not supplied.

240

25

35

10

12

11,5

22,53

70 158

10

10

14

23

Backset 11,5 mm

2220 SERIE

» Galvanised faceplate plus an anodised aluminium faceplate supplement.

» Latchbolt, deadbolt and cylinder are nickel-plated.

» Latchbolt is reversible.» Distance between centres:

65mm.» Two anodised aluminium

roses included» Four different functions,

see below.» There is no strike plate

supplied.

2200 SERIE

Backset 13,5 mm

10

15

23

27

13,5

65 173

30

25

217

3 2

11

11

10

14 1

PANIC LOCKS

Description of panic functions

» Distance between centres is 92mm.» Backsets availble: 22, 27, 32, 37 and

42mm.» Follower 9mm. » Right or left hand must be indicated.» Panic B and Panic C functions

available.» Optionally they can be ordered

without panic function.» Faceplate and strike-plate are

stainless steel (AISI 304)» Closed, galvanised steel lock case.» 100% of parts manufactured with

fi re-resistant materials. Fire Certifi ed according with DIN 18251.

» Designed to work with euro-profi le cylinders.

2280 SERIE

SINGLE LEAF DOORS

PANICFUNCTIONS

» A complete range of panic locks for doors opening outwards.

» Lock hand must be indicated. See handing criteria below.

» The handle from the interior will always retract both latch and deadbolt.

PANIC C:

» Standard follower.» The latch can be retracted by key.» They are installed with handle on the interior and pull-knob on the exterior.

PANIC C APPLICATIONS:» Deadbolt locking: Access denied,

except for key owners.» Latchbolt locking: - Controlled access with electric strike

LOCK HANDING CRITERIA

Right hand Left hand

OUTSIDE OUTSIDE

245

38,5

36

70

35

12

11

22,5

9

3

A 15

55

23

74

92

200

24

A= 22/27/32/37/42 mm

PANIC B:

» Split follower.» The latch can not be retracted by key.» They are installed with handle on both sides.Access from the exterior is made inthree steps:» Deadbolt is retracted with the key

(One turn). » The key is turned an additional 1/4

turn.» Latch is retracted with the handle in

the exterior.If the key is extracted after the fi rst step, the handle in the exterior will not retract the latch.Extracting the key after the second step leaves the entrance as a pass door.PANIC B APPLICATIONS:» Deadbolt locking: Access denied,

except for key owners.» Latchbolt locking: - Controlled access with electric strike - Pass door

4 15

2282 Y 2283 SERIE

d

2282 lock

» Panic lock designed for the ACTIVE door in double leaf exit doors.

» Panic B and Panic C functions available.

» The faceplate is 400mm. long and possesses the trigger to release the automatic locking in 2283 counterlock.

» Designed to work with euro-profi le cylinders.

400

146

36

70

35

133

11

12

2

2,5

13

26,5

22 48130

9

6

A 15

55

23

74

92

20024

A= 22/27/32/37/42 mm

2283 counter lock

» Panic counter lock designed for the INACTIVE door in double leaf exit doors.

» When the follower is turned from the interior, the top jamb & fl oor locking points are retracted and, simultaneously, both latchbolt and deadbolt are pushed into the 2282 lock, thus letting free exit through the complete double leaf door.

58

164

126

61

121

38

ø 19M10

40

1,6

9

6

A15

23

3

41

M10ø 19

374 40013

A=22/27/32/37/42 mm

M10 threaded connections for Top jamb & fl oor automatic locking rods

Automatic locking trigger in the INACTIVE door

Latchbolt and deadbolt pushing plates

Panic follower in the interior.

Locking activator

Euro-profi le cylinder(Not included)

2283Inactive door

2282 Active door

COMMON FEATURES» Distance between centres is 92mm.» Backsets availble: 22, 27, 32, 37 and 42mm.» Follower 9mm. » Right or left hand must be indicated.» Faceplate and strike-plate are stainless steel (AISI 304)» Closed, galvanised steel lock case.» 100% of parts manufactured with fi re-resistant materials.

Fire Certifi ed according with DIN 18251.

WAY OF WORKINGWhen the ACTIVE door shuts, the faceplate of the 4282 lock releases the trigger on the 4283 counter lock and this way top jamb & fl oor locking points are thrown, locking the INACTIVE door.When the INACTIVE door is opened from the interior with the handle, the top jamb & fl oor locking points are retracted and, simultaneously, both latchbolt and deadbolt are pushed into the 4282 lock, thus letting free exit through the complete double leaf door.TESA recommends to complete the double leaf installation with a Yale 4000 series closing system for double leaf doors, which feature automatic door co-ordination and comply to Fire door standards.

HAND OF DOUBLE LEAF DOOR

Right hand Left hand

OUTSIDE OUTSIDE

Inactive ActiveActive Inactive

DOUBLE LEAF DOORS

16 1

» Power source required: 12Volt. AC; 0.6 Amp.

» Non-Fail-Safe operation: Strike unlocks when energised. If a power failure occurs, the door remains locked.

» Strikes with special characteristics can be served upon request : Fail-Safe operation and DC power source (strike locks when energised) or other special power source specifi cations.

» All the range complies with European Electromagnetic Compatibility Standard

(89 / 336 / CEE).» Stainless steel faceplates.» Short faceplate models are intended for

use with latchbolt-only locks : 4219, 4239 and passage door locks.

» Long face plate models are intended for use with all the range of TESA locks featuring either sliding deadbolt, swinging deadbolt, roller-bolts or hook.

» Latch keeper in any model features horizontal adjustment for perfect latch fi tting: a 4mm. play is allowed.

ELECTRIC STRIKES

4 mm

Electric strikes with adjustable latch keeper

CER MORTISE SERIES

17,5

20

16

5

55 68

20

17,5

16

55 68

11

67 92,7

25

11

250

11

11

13

90

107

25

145,5 160

6 17

» The wide range of special polyamide strikes allows perfect fi tting to the vast majority of aluminium stiles in the market.

» Their glass-fi bre reinforced polyamide construction assures a smooth latch sliding and high durability.

» T21 model, which is manufactured in a metallic alloy for higher resistance, is the perfect choice for channelled stiles. (See application picture below)

SPECIAL STRIKES

1 - One piece required 2 - Two pieces required 3 - Three pieces required

T21 105 10M

T21 105 11M

T30 105 10

T30 105 11

T30 105 40

T30 105 41

T30 085 10

U29 102 10

U29 102 11

U29 102 40

U29 102 41

U30 133 10

U30 130 11

U30 133 40

U30 133 41

2210

B

2211

B

2230

2231

2230

L / 2

230P

2231

L

2231

P

2230

LB /

2230

PB

2240

2241

1 1 1 1

1 1 2 3 3 2

1 1 1

1 1 2 2 2 2

1 1

1 1 1

1 1

1 1 1

1 1 2 2 2 2

1 1

1 1 1

1 1 1

1 1 2 2 2 2

1 1

1 1 1

29

111,5

5

10

T2

11

05

10

R

T2

11

05

11

R

T3

01

05

10

30

15

5

10

1,5

T3

01

05

11

T3

01

05

40

T3

01

05

41

U2

91

02

10

29

U2

91

02

11

U2

91

02

40

U2

91

02

21 25

2,5

10

T3

00

85

10

T3

00

85

11

T2

11

05

40

R

T2

11

05

41

R

30

241,5

5

8

U3

01

33

10

30

U3

01

33

11

U3

01

33

40

U3

01

33

41

25

3,5

10

Polyamide strikes for special applications

T21 / T30 / U29 / U30

60

18 1

ADJUSTABLE STRIKES

Specifi c for european chamber

» Strike material; stainless steel.» Specifi c design for Normalized aluminium profi les.» Lateral regulation of 6mm (+3, -3).

Ref.

CRE2210AI

CRE2216AI

CRE2230AI

CRE2240AI

CRE2246AI

CRE2240EI

CRE2210XI

CRE2230XI

LOCK

2210B

2216 / 2210 EURO

Aux locks 2230P

2240 / 2230L / P

2246

2240 EURO / 2230P EURO

2210X / 2230X

Aux. locks 2230X

FINISH

AI

AI

AI

AI

AI

AI

AI

AI

PACK

5

5

5

5

5

5

5

5

Attachment for channel fi xing

Stainless steel plate

Lateral adjustment screw (6 mm)Rapid fi xing screw

3 mm 3 mm

Rapid fi xing system

» Metallic alloyed strikes» Specifi c design for Normalized aluminium profi les » Strike width 21 mm, » Strike thickness 5 mm

Model

T2110510R

T2110511R

T2110540R

T2110541R

LOCK

2210B/2216B/2210B y 2216B EURO

2211B/Aux locks 2230P/2230P EURO

2240 y 2246 EURO/2230P and 2236P EURO

2241 EURO/2231P EURO

FINISH

NE

NE

NE

NE

PACK

10

10

10

10

» Metallic alloyed strikes» Specifi c design for Normalized aluminium profi les » Lateral regulation of 6mm (+3, -3).

Model

T2110510G

T2110511G

T2110540G

T2110541G

LOCK

2210B/2216B/2210B y 2216B EURO

2211B/Aux locks 2230P/2230P EURO

2240 y 2246 EURO/2230P and 2236P EURO

2241 EURO/2231P EURO

FINISH

NE

NE

NE

NE

PACK

10

10

10

10

CRE

T21G

DETAIL OF THE FIXATION SYSTEM

T21R

8 19

» The new cylinder escutcheon, the E240, offers design and security.

» 2 tempered plates protects the cylinder from direct attacks using drill, offering the same security level that the cylinder escutcheons used in Tesa security doors.

» The metallic alloyed cover offers to the set a protective function anti jaw .

» The fi xation of the cylinder escutcheon to the door is made with hidden screws.

ESCUTCHEONS

Security escutcheons

E240 ESCUTCHEON

» Designed for its simple and fast installation.» The installation does not require screws that go through

the lockcase; the cylinder rose is placed riveting the plate to the profi le.

Easy installation escutcheon

E205 ESCUTCHEON

» Anti extraction attack cylinder rose manufactured in metallic alloy.

» Nickel plated steel plate in the interior is hidden with a snap-in polyamide cover.

» Very easy installation with bolt through fi xing with M5 screws.

» Finishes : Black, white, polished brass plating, satin chrome.

Anti extraction attack

E210 ESCUTCHEON

» Nickel plated steel plates are hidden with snap-in polyamide covers.

» Finishes : Black and white.

Steel plates escutcheon

E190 ESCUTCHEON

20 2

ACCESORIES

Complement for 2230 series locks

GUARPOHC FLOOR STRIKE» Floor strike for bottom locking in 2 230 series locks.» It possesses a spring-loaded protective lid that prevents

dust from getting into the strike hole.» Nickel plated fi nish.

PAB2230 LOCKING BOLTS» Hardened steel top jamb & fl oor locking bolts. (Set of two

units).» M8 interior thread.

98

727,5

10

32

22 34

ø 5

22

12

30

M8

FOLLOWER REDUCTION SQUARE SLEEVES

Follower adaptation

» Zinc plated steel square sleeves.

7 8

18

6 8

18

8 9

8

44700NM7mm. spindle into

8mm. Follower

adaptation.

44600NM6mm. spindle into

8mm. Follower

adaptation.

44900NM8mm. spindle into 9mm. Follower adaptation.

0 21

NYLON HANDLE SETS FOR ALUMINIUM STILE DOORS

Steel soul

» 8mm. spindle & follower.» Nylon handles with galvanised steel

reinforced core.» Nylon oval rose.» Direct fi xing to door with tapping

screws.

29,5

120

ø 20

MNRO800NE

MNRO800BL

M2000 SERIE

¿White or Black?

» Set.» Oval rose.» 2 springs.» 8 mmspindle.» 4 screws per lever.

M2000NE

M2000BL

67 45

31

1/48

125 51 12

MNRO800 SERIE

ALUMINIUM SERIES

Range of fi nishes

» Set.» Oval rose.» 2 springs.» 8 mm spindle.

30

113

ø 20

MS Y MV SERIES

F2 Champagne

F1 Silver

F3 Gold

F4 Light bronze

F5 dark bronze

F6 Stainless steel

AN Black

AB White

M2000 SERIE

22 2

CYLINDERS

Customized masterkeying

» As befi ts our position as a leading European cylinder manufacturer, TESA offers a range capable of adapting to any requirement:

» The choice of a cylinder is based on various criteria:Degrees of security» Cylinders with a restricted, patented key; if the key is

lost, we can be sure that no copies will be made without the owner’s permission.

» Reversible dimple key.» Sawn key.Masterkeying capacity» It makes things easier for the user, as it allows one key to

open several cylinders, even if each cylinder has its own key.

» A masterkeying is a planned locking system in which the master key can open more than one cylinder, even if each cylinder has its own key.

» For offi ces, residential homes and plants of various sizes, masterkeying is a secure and comfortable solution that reduces the number of keys that must be handled: security and comfort.

Several sizes» All kinds of sizes and models: eccentric/center (30/30),

eccentric/off-center (30/40, 30/45, 35/35, etc.), 13’2/15 mm radium, half cylinders (30/10), push-button cylinders, etc.

Standards» This range conform to current European standards (EN

1303, DIN, etc.).

DOOR CLOSERS

Security and comfort

» A complete range for every situation that requires a door closer: from models for light architectural doors in aluminium or PVC to systems for RF doors with a double leaf, integrated lock selector and electromagnetic retention. There also exists a whole range of accessories for equipping simple/double operation doors (including glass doors).

» TESA’s door closers (except CT 1000) have been certifi ed by the EN 1154 standard, according to the European regulation 89/106/CEE and the Spanish standard for buildings NBE-CPI 96 art. 15.5.5.

CTSU200

CT1000

CT2500 CT3000

CT2000

CT2200BRI

BVI

2

2 23

NOTES

23

ASSA ABLOY, is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

Abril 2009 - Depósito Legal BI-503-07

Talleres de Escoriaza, S.A.U. Barrio Ventas, 35 · E-20305 Irun · Guipúzcoa

Tel. +34 943 669 100 Fax: +34 943 633 221

www.tesa.es

LO

CK

S F

OR

NA

RR

OW

ST

ILE

S

3 - Locks for narrow stiles · » Cross key type cylinder. Locks are supplied with three keys. »...

Documents

Transcript of 3 - Locks for narrow stiles · » Cross key type cylinder. Locks are supplied with three keys. »...