Step 2 Tap”Add Device”or “+”Step 3 Choose”Electric Outlet”

Notice: There are no any other LED colors except solid blue, solid green and blinking green, if it became blue with blinking green, that caused by you touch the on/off button by mistake when you enter the pairing mode, please just ignore the blue light, only remember that blinking green light is enter the pairing mode.

1. 1st time to connecting Wi-Fi & phone, make sure the outdoor smart plug is connected to the same Wi-Fi (2.4G ONLY) as your phone connected.Dual-band Wi-Fi router- 2.4G & 5G, select 2.4G. After initially setting, you can access to other Wi-Fi or 4G/3G/2G cellular to control it 2. Phone system: IOS 8.0 or above & Android V4.4 or above. 3. Far away from wifi router or poor wifi will cause wifi connection drop.

Search "Smart Life" on App store, Google Play, or Scan the QR code on the User Manual and install it.

There are two network connection methods (Normal mode and AP mode). Normal mode is default. Users could tap the upper right corner to switch the connection method to AP mode.

Not able to connect the smart product:1. Please kindly check if the product connects the power, turnson and enter the configuration status (When the product turnson, long press the on/off switch for 5 seconds, it will enterconfiguration status.)2. Please check if your mobile phone can connect the Wi-Fiand have strong Wi-Fi signal.3. Please make sure the Wi-Fi frequency is 2.4GHz. If Wi-Finetwork frequency is 5GHz, it’s not able to connect thesmart product.4. Please kindly check if the Wi-Fi password is correctwhen you add the smart products to your device. (Note thatcase sensitive, punctuation and spaces.)

Please kindly check the above and make sure there is noproblem and reconnect. If the connection still fails, please check the settings of your Wi-Fi:1. Please enter the router's setting page: First, turn off ‘SmartSet Up’ and ‘Parental Controls’ these two functions.2. Wi-Fi setting of your router: The encryption method should be set to WPA2-PSK type, the authentication type is AES. Or both the encryption method and the authentication type are automatic. Wireless mode cannot be ‘11n only’.3. Wi-fi name and password are recommended to be set to English letters +Numbers, no spaces and special characters. Please kindly check the above and make sure there is no problem and reconnect. If the connection still fails, please heck the settings of your Wi-Fi；4. Please check if the number of access device has reached the upper limit of the router. Try to turn off some Wi-Fi devices, restart the router and reconnect the network.5. If the router enables wireless MAC address filtering, the device MAC should be added to the allowed device list to ensure that the router does not prohibit the device from networking.

Enter mobile number or E-mail address to register an account with verification code.

Step 1 Set Rapid Flashing Indicator Light (Pairing Mode)

Step 1 Set Slow Flashing Indicator Light (Pairing Mode)

Connect the device

Download the Smart Life APP

Register a Smart life account

2. Smart Life App Connect Pre-check

On/Off Button1 In 3 Out

Blinking green

Long press the button to restore to factory settings

3 AC outlets individually controlled or controlled as a one unit

1.Enter the pairing mode; after enter the pairing mode the light will turn into solid green light

2.Solid blue: All on or all off button for control 3 ac outlets; And individual control three ac outlets need on app to operate it;

Outdoor Smart Plug Model Number: SOP03-15A Waterproof Level: IP44 Parameters: AC 100-240V 50/60Hz Max Power: 1875W(resistance loading) Max Current: 15A Rated Voltage: 125V Working Temperature: -20~60°C(-4~140°F) Remote Control: Smart Life APP (Compatible with Android 4.1/IOS 8.0)

Package content 1 x Outdoor Smart Plug 1 x User Manual1 x Thanksgiving card

4. Specification

3. FAQ

Step 2 Tap”Add Device”or “+”Step 3 Choose”Electric Outlet”

Step 4 Add Device-AP Mode Step 5 Enter Wifi

Step 6 Connecting Step 7 Edit Device’s Name

Step 4 Add Device-Normal Mode Step 5 Enter Wifi Password

Step 6 Connecting Step 7 Edit Device’s Name

（Ⅰ）Normal mode

（Ⅱ）AP mode

Normal Mode, automatic connect to your home wifi, thenenter Wi-Fi password

.

After the light turn into rapidly blinking green lights, continue to long press the on/off button for 5s or more until the device’s indicator turn into slowly blinking green lights(1 times 3 seconds)

For AP Mode, connect to the Wi-Fi hotspot named ”SmartLife”as shown in the pics. Note: Some devices might have different hotspot names.

※

※ Product is automatically disconnected/ reconnected during using, no response during operation, and response lag: 1. Please make sure the product is under the Wi-Fi coverage with strong signal. 2. Make sure the power supply is stable and the Wi-Fi can be connected to the external network.

※

Can the device be controlled under Mobile 2G/3G/4G network? When adding the smart device at the first time, the smart device and the mobile phone must be in the same 2.4GHz wi-fi environment. After being added successfully, the mobile phone is able remote control the smart device under 2G/ 3G/ 4G network (kindly note that the smart device should be under wifi coverage with strong wifi signal).

※

You’re all set!Any question?

support@tonbux.comwww.amazon.com/tonbux

Outdoor Smart PlugModel: SOP03-15A

User Manual

Long press the on/off button for 5s or more until the device’s indicator turn into rapidly blinking green lights (2 times per second)

1. Pls plug the smart plug into the wall, and the color is blue

2. Pls long press the on/off button for 5s or more, the indicator light will rapidly

1. Pls plug the smart plug into the wall, and the color is blue

2. Pls long press the on/off button for 5s or more, the indicator light will rapidly flashing.

3. Hold the on/off button for 5s until the indicator light slowly flashing