9 322755 074091

TCC0

89

12/1

9 RET

1894

CUSTOMER CARE

131 686PPG Industries Australia Pty Limited. 9 Birmingham Ave, Villawood NSW 2163. ABN 82 055 500 939. Armawall® is a registered trademark of PPG Industries Australia Pty Limited. The PPG Logo is a registered trademark of PPG Industries Ohio, Inc. Colours shown are as close as possible to actual paint colours. Due to limitations of printing process, photographic and printing images may not represent the true colour. Taubmans.com.au

taubmansaustralia taubmanstaubmans.com.au

Armawall texture coatings are a three coat system. The application of a primer and texture coating creates the profile and the top coat will enhance the durability, long term protection and dirt shedding properties of your selected system. Armawall Texture Coatings are designed to perform at their optimum, when they are used as a complete coating system. With this in mind we strongly recommend that the coating system that you have selected be applied by an Armawall trained applicator, experienced in the application of the products and with knowledge of our systems.

2 TEXTURE COAT Provides the base texture, which provides the aesthetic look and desired profile. Armawall has a wide range of textured finishes and the profiles range from subtle roll on texture finishes to heavier trowel applied finishes.

3 TOP COATDesigned and engineered to offer excellent dirt shedding properties and greater flexibility, which will ensure greater long-term surface and substrate protection from the elements. Armawall Satin has a proud history of over 30 years protecting properties along our coastline.

1 PRIMER Seals the surface and evens out the absorption rate in the substrate, ensuring optimal adhesion for the following texture coating. It will also promote easier application of the texture coat.

3 COAT SYSTEM

ROLL ON FINISHESARMASHIELD MATT ARMASHIELD LOW GLOSS ARMAWALL SAND

LOW PROFILETinted to Taubmans® Whitecap Grey

LOW PROFILETinted to Taubmans® Wisp O Smoke

LOW PROFILETinted to Taubmans® Mountain Shadow

ARMAWALL SATIN ARMAWALL ROLL ON MEMBRANE ARMAWALL IMPACT

LOW PROFILETinted to Taubmans® Atwill Buff

LOW PROFILETinted to Taubmans® Grey Beige

LOW PROFILETinted to Taubmans® Barefoot Beach

HIGH PROFILETinted to Taubmans® Atwill Buff

HIGH PROFILETinted to Taubmans® Grey Beige

HIGH PROFILETinted to Taubmans® Barefoot Beach

ARMAWALL ULTRASAND

LOW PROFILETinted to Colorbond® Surfmist®

BAGGEDTinted to Colorbond® Surfmist®

BRUSHTinted to Colorbond® Surfmist®

ARMAWALL ULTRAFINE FLAT

LOW PROFILETinted to Colorbond® Monument®

BAGGEDTinted to Colorbond® Monument®

BRUSHTinted to Colorbond® Monument®

TROWEL ON FINISHESVILLA SANDS TUSCANY SAND TUSCANY SAND COARSE

Tinted to Taubmans® Foxtail Tinted to Taubmans® Rock Quarry Tinted to Taubmans® Rock Quarry

TROWEL ON 1.5MM TROWEL ON 2MM VERONA

Tinted to Taubmans® Eagle Crest Tinted to Taubmans® Eagle Crest Tinted to Taubmans® Wise Owl

COLORBOND®, BlueScope, the BlueScope brand mark and ® colour names are registered trade marks of BlueScope Steel Limited.

COATINGSYSTEMTEXTURE

9 322755 074091

TCC0

89

12/1

9 RET

1894

CUSTOMER CARE

131 686PPG Industries Australia Pty Limited. 9 Birmingham Ave, Villawood NSW 2163. ABN 82 055 500 939. Armawall® is a registered trademark of PPG Industries Australia Pty Limited. The PPG Logo is a registered trademark of PPG Industries Ohio, Inc. Colours shown are as close as possible to actual paint colours. Due to limitations of printing process, photographic and printing images may not represent the true colour. Taubmans.com.au

taubmansaustralia taubmanstaubmans.com.au

Armawall texture coatings are a three coat system. The application of a primer and texture coating creates the profile and the top coat will enhance the durability, long term protection and dirt shedding properties of your selected system. Armawall Texture Coatings are designed to perform at their optimum, when they are used as a complete coating system. With this in mind we strongly recommend that the coating system that you have selected be applied by an Armawall trained applicator, experienced in the application of the products and with knowledge of our systems.

2 TEXTURE COAT Provides the base texture, which provides the aesthetic look and desired profile. Armawall has a wide range of textured finishes and the profiles range from subtle roll on texture finishes to heavier trowel applied finishes.

3 TOP COATDesigned and engineered to offer excellent dirt shedding properties and greater flexibility, which will ensure greater long-term surface and substrate protection from the elements. Armawall Satin has a proud history of over 30 years protecting properties along our coastline.

1 PRIMER Seals the surface and evens out the absorption rate in the substrate, ensuring optimal adhesion for the following texture coating. It will also promote easier application of the texture coat.

3 COAT SYSTEM