3-15 HP Prefabricated Pump Assemblies

4
Technology Solutions for the Green Industry Pump-in-the-Box ( PIB ) 3-15 HP Prefabricated Pump Assemblies RIGHT: 10HP Booster Pump with Desert Tan Powder Coating and Service Disconnect Left: 5HP Self Priming with Manual Filtration Delivered ready to install. FEATURES & BENEFITS Rugged engineering to withstand harsh outdoor conditions Prefabricated and tested prior to shipment Energy efficient VFD design for extended life of pump and piping Onsite delivery and expedited order fulfillment services Labor saving installation...just connect water and power 7.5 HP and larger feature integrated crane/forklift slots Corrosion and vandal resistant marine grade aluminum housing Full one (1) year limited manufacturer's parts warranty SiteOne Green Tech technical support and field service

Transcript of 3-15 HP Prefabricated Pump Assemblies

Page 1: 3-15 HP Prefabricated Pump Assemblies

Technology Solutions for the Green Industry

Pump-in-the-Box (PIB)

3-15 HP Prefabricated Pump Assemblies

RIGHT: 10HP Booster Pump with Desert Tan Powder Coating and Service Disconnect

Left: 5HP Self Priming with Manual Filtration

Delivered ready to install.

FEATURES & BENEFITS

•Rugged engineering to withstand harsh outdoor conditions

•Prefabricated and tested prior to shipment

•EnergyefficientVFDdesignforextendedlifeofpumpandpiping

•Onsitedeliveryandexpeditedorderfulfillmentservices

•Labor saving installation...just connect water and power

•7.5 HP and larger feature integrated crane/forklift slots

•Corrosion and vandal resistant marine grade aluminum housing

•Full one (1) year limited manufacturer's parts warranty

•SiteOneGreenTechtechnicalsupportandfieldservice

Page 2: 3-15 HP Prefabricated Pump Assemblies

PIB Pump in the Box 3-5 HP

STANDARD EQUIPMENT

•Marine grade aluminum pad-lockable enclosure & structural base

•Safety hinged top/front opening for easy enclosure access

•Externalloadcenterwithdisconnect&surgeprotection•Commercial grade name brand pumps, motors and drives

•ULlistedheavydutyVFDcontrolwithpressuretransducer•Hot stop thermal protector to prevent destructive overheating

•Galvanizedpipe,fittingsandgroovedunion•In-line pressure gauge and brass ball valve

•Discharge check valve & pneumatic pressure tank

 OPTIONAL EQUIPMENT & SERVICES

•In-linefilter…protectsirrigationsystemfromclogging

•Powdercoatingonenclosure&base…aestheticallypleasingnaturaltancolor•Precastconcretepumpmountingpad…forfast&cleaninstallation

•Irrigationcontrollerpre-mountedtoexteriorwallofpumpenclosure

•Master valve for irrigation controller activation of pump

•Internal heater to protect against freeze damage

•VFDwithenhancedhumanmachineinterface(HMI)

•SiteOneGreenTechfieldservice,whereavailable,isatanadditionalcharge

Page  Two

in  top  green  box,  in  upper  right  corner,  in  large  white  font  (to  match  PIB  on  the  le:),  insert    "3-­‐5  HP"

insert  standard  equipment  gray  bar  and  bullet  points  from  page  3  here  on  page  2

use  exisFng  photograph  currently  on  page  2insert  3  boxed  detail  drawings  from  page  3  here  on  page  2add  new  photograph  to  page  2

insert  the  part  number  chart  shown  below

PIB-­‐3-­‐MSC-­‐231 GT  Pump-­‐in-­‐the-­‐box  3HP  Mulit-­‐Stage  Centrifugal  230V/1PHPIB-­‐3-­‐MSC-­‐233 GT  Pump-­‐in-­‐the-­‐box  3HP  Mulit-­‐Stage  Centrifugal  230V/3PHPIB-­‐5-­‐C-­‐231PIB-­‐5-­‐C-­‐233PIB-­‐5-­‐C-­‐463

PIB-­‐3-­‐CB-­‐231PIB-­‐3-­‐CB-­‐233 GT  Pump-­‐in-­‐the-­‐box  3HP  Centrifugal  Booster  230V/3PHPIB-­‐3-­‐CB-­‐463 GT  Pump-­‐in-­‐the-­‐box  3HP  Centrifugal  Booster  460V/3PHPIB-­‐5-­‐CB-­‐231 GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  Booster  230V/1PHPIB-­‐5-­‐CB-­‐233 GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  Booster  230V/3PHPIB-­‐5-­‐CB-­‐463 GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  Booster  460V/3PH

GT  Pump-­‐in-­‐the-­‐box  3HP  Self-­‐Priming  Centrifugal  230V/1PHGT  Pump-­‐in-­‐the-­‐box  5HP  Self-­‐Priming  Centrifugal  230V/1PH

insert  opFonal  equipment  &  services  gray  bar  and  bullet  points  from  page  3  here  on  page  2,  and  add  the  following  bullet  points"Master  valve  for  irrigaFon  controller  acFvaFon  of  pump""Internal  heater  to  protect  against  freeze  damage""VFD  with  enhanced  human  machine  interface  (HMI)"

insert  revised  concrete  pad  (PPT)  drawing  here  on  page  2

GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  230V/3PH

PIB-­‐3-­‐SPC-­‐231PIB-­‐5-­‐SPC-­‐231

PIB  Model  #

Descrip1on  (Boost)

PIB  Model  #

PIB  Model  #

Descrip1on  (Self-­‐Priming)

GT  Pump-­‐in-­‐the-­‐box  3HP  Centrifugal  Booster  230V/1PH

GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  460V/3PH

Descrip1on  (Suc1on  Li=)

GT  Pump-­‐in-­‐the-­‐box  5HP  Centrifugal  230V/1PH

PLAN VIEW

LEFT SIDE VIEW

DO NOT SCALE

FRONT ELEVATION VIEW RIGHT SIDE VIEW

PROJECTED ISO VIEW

MOTOR

SUCTION SIZE

DISCHARGE SIZE

POWER

FILTRATION DEGREE

MISC

BASE / PAD PENETRATION DIMENSIONSNOTES:THIS IS A CONCEPTUAL DESIGN THAT MAY BE SUBJECT TO MINOR CHANGES DUE TO EQUIPMENT DIMENSIONS.EQUIPMENT SETBACKS SHOULD BE IN COMPLIANCE BY NEC, LOCAL AND STATE ELECTRICAL CODES.

DRAWN BY:

APPROVED BY:CUSTOMER APPROVAL SIGNATURE DATE

MODEL

PROJECT

49"

6012"

3358"

31"

PLAN VIEW

LEFT SIDE VIEW

DO NOT SCALE

FRONT ELEVATION VIEW RIGHT SIDE VIEW

PROJECTED ISO VIEW

MOTOR

SUCTION SIZE

DISCHARGE SIZE

POWER

FILTRATION DEGREE

MISC

BASE / PAD PENETRATION DIMENSIONSNOTES:THIS IS A CONCEPTUAL DESIGN THAT MAY BE SUBJECT TO MINOR CHANGES DUE TO EQUIPMENT DIMENSIONS.EQUIPMENT SETBACKS SHOULD BE IN COMPLIANCE BY NEC, LOCAL AND STATE ELECTRICAL CODES.

DRAWN BY:

APPROVED BY:CUSTOMER APPROVAL SIGNATURE DATE

MODEL

PROJECT

49"

6012"

3358"

31"

43"

PLAN VIEW

LEFT SIDE VIEW

DO NOT SCALE

FRONT ELEVATION VIEW RIGHT SIDE VIEW

PROJECTED ISO VIEW

MOTOR

SUCTION SIZE

DISCHARGE SIZE

POWER

FILTRATION DEGREE

MISC

BASE / PAD PENETRATION DIMENSIONSNOTES:THIS IS A CONCEPTUAL DESIGN THAT MAY BE SUBJECT TO MINOR CHANGES DUE TO EQUIPMENT DIMENSIONS.EQUIPMENT SETBACKS SHOULD BE IN COMPLIANCE BY NEC, LOCAL AND STATE ELECTRICAL CODES.

DRAWN BY:

APPROVED BY:CUSTOMER APPROVAL SIGNATURE DATE

MODEL

PROJECT

49"

6012"

3358"

31"

PLAN VIEW

LEFT SIDE VIEW

DO NOT SCALE

FRONT ELEVATION VIEW RIGHT SIDE VIEW

PROJECTED ISO VIEW

MOTOR

SUCTION SIZE

DISCHARGE SIZE

POWER

FILTRATION DEGREE

MISC

BASE / PAD PENETRATION DIMENSIONSNOTES:THIS IS A CONCEPTUAL DESIGN THAT MAY BE SUBJECT TO MINOR CHANGES DUE TO EQUIPMENT DIMENSIONS.EQUIPMENT SETBACKS SHOULD BE IN COMPLIANCE BY NEC, LOCAL AND STATE ELECTRICAL CODES.

DRAWN BY:

APPROVED BY:CUSTOMER APPROVAL SIGNATURE DATE

MODEL

PROJECT

49"

6012"

3358"

31"

Page 3: 3-15 HP Prefabricated Pump Assemblies

7.5-15 HP PIB Pump in the Box

 OPTIONAL EQUIPMENT & SERVICES

•In-linefilter…protectsirrigationsystemfromclogging

•Powdercoatingonenclosure&base…aestheticallypleasingnaturaltancolor•Precastconcretepumpmountingpad…forfast&cleaninstallation

•Irrigationcontrollerpre-mountedtoexteriorwallofpumpenclosure

•Master valve for irrigation controller activation of pump

•Internal heater to protect against freeze damage

•VFDwithenhancedhumanmachineinterface(HMI)

•SiteOneGreenTechfieldservice,whereavailable,isatanadditionalcharge

SAME STANDARD EQUIPMENT AS 3-5 HP PIB, PLUS...

•Integrated crane/forklift slots facilitate safe handling of 7.5-15 HP units

•Expandedcoolingventsforsuperiorairflowon7.5-15HPunits

SAME OPTIONAL EQUIPMENT & SERVICES AS 3-5 HP PIB

Left: Powder coated PIB

Page  3

in  top  green  box,  in  upper  right  corner,  in  large  white  font  (to  match  PIB  on  the  le:),  insert    "7.5-­‐15  HP"

insert  standard  equipment  gray  bar,  but  change  copy  to  "ALL  STANDARD  PIB  EQUIPMENT,  PLUS…"        "Integrated  forkli:  slots  facilitate  safe  handling  of  larger  enclosures"      "Expanded  cooling  vents  for  superior  air  flow  on  larger  enclosures"

use  exisVng  photographs  currently  on  page  3move  single  boxed  detail  drawing  from  page  1  to  here  on  page  3add  new  photograph  to  page  3

insert  the  part  number  chart  shown  below

PIB-­‐75-­‐C-­‐231PIB-­‐75-­‐C-­‐233PIB-­‐75-­‐C-­‐463PIB-­‐10-­‐C-­‐231PIB-­‐10-­‐C-­‐233PIB-­‐10-­‐C-­‐463PIB-­‐15-­‐C-­‐233PIB-­‐15-­‐C-­‐463

PIB-­‐75-­‐CB-­‐231 GT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  Booster  230V/1PHPIB-­‐75-­‐CB-­‐233 GT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  Booster  230V/3PHPIB-­‐75-­‐CB-­‐463 GT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  Booster  460V/3PH

insert  (revised)  opVonal  equipment  &  services  gray  bar  and  bullet  points  shown  on  page  2,  again  here  on  page  3

delete  concrete  pad  (PPT)  drawing  from  page  3

PIB  Model  # Descrip1on  (Boost)

GT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  230V/3PHGT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  460V/3PHGT  Pump-­‐in-­‐the-­‐box  10HP  Centrifugal  230V/1PHGT  Pump-­‐in-­‐the-­‐box  10HP  Centrifugal  230V/3PHGT  Pump-­‐in-­‐the-­‐box  10HP  Centrifugal  460V/3PHGT  Pump-­‐in-­‐the-­‐box  15HP  Centrifugal  230V/3PH

PIB  Model  # Descrip1on  (Suc1on  Li9)GT  Pump-­‐in-­‐the-­‐box  7.5HP  Centrifugal  230V/1PH

GT  Pump-­‐in-­‐the-­‐box  15HP  Centrifugal  460V/3PH

LEGEND

1. ESC Booster Pump w/ TEFC Motor2.VFDw/IntegralServiceDisconnect3.GroovedPipingw/Check&InsolationValve4. Bladder Tank5.ExternalServiceDisconnect(NEMA3R)

48”

36”

3” Green Tech

CL

5/8” LiftingProvision

LC

optional precast concrete pad, part # PCP-3648

Page 4: 3-15 HP Prefabricated Pump Assemblies

Select "PIB" and horsepower(See selection charts above & below)

Select pump/application typeC = Centrifugal Lift (15 HP max)CB = Centrifugal Boost (7.5hp max)MSC = Multi-stage centrifugal (3hp max)SPC = Self priming centrifugal (5hp max)

Select available power supply231 = 230 Volt / Single Phase233 = 230 Volt / 3 Phase463 = 460 Volt / 3 Phase

Select OptionsPCT = Powder Coat TanPCP = 36" x 48"x 3" precast concrete pad(Call for additional options)

Florida: 407-323-7977

USA: 800-427-0779www.greentech.siteone.com

S1GT-PIB-V2

PIB-5

4 STEPS TO BUILD A PIB MODEL NUMBER

PIB-5-CB

PIB-5-CB-233

PIB-5-CB-233/PCT/PCP

1

2

3

4

PIB Pump in the Box

These  are  the  two  revised  charts  that  you  are  moving  to  page  4

PSI TDH82 19078 180 PIB-75-C PIB-15-C74 170 PIB-3-MSC69 16065 150 PIB-5-C PIB-10-C61 14056 13052 12048 110 PIB-5-CB43 10039 90 PIB-75-CB35 8030 70 PIB-3-CB26 6022 50

20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200

PSI TDH SPC  =  Self-­‐Priming  Centrifugal61 14056 13052 12048 11043 10039 90 PIB-3-SPC35 80

20 30 40 50 60

PIB-5-SPC

GPM

GPM

PIB  Selec7on  Chart  for  MSC=Mul7-­‐Stage  Centrifugal,  C=Centrifugal,  CB=Centrifugal  Boost  

CALL  FOR  INFO

PIB  Selec7on  Chart  for  3-­‐5  HP

These  are  the  two  revised  charts  that  you  are  moving  to  page  4

PSI TDH82 19078 180 PIB-75-C PIB-15-C74 170 PIB-3-MSC69 16065 150 PIB-5-C PIB-10-C61 14056 13052 12048 110 PIB-5-CB43 10039 90 PIB-75-CB35 8030 70 PIB-3-CB26 6022 50

20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 180 200

PSI TDH SPC  =  Self-­‐Priming  Centrifugal61 14056 13052 12048 11043 10039 90 PIB-3-SPC35 80

20 30 40 50 60

PIB-5-SPC

GPM

GPM

PIB  Selec7on  Chart  for  MSC=Mul7-­‐Stage  Centrifugal,  C=Centrifugal,  CB=Centrifugal  Boost  

CALL  FOR  INFO

PIB  Selec7on  Chart  for  3-­‐5  HP

CALL FOR INFO