250 - Makita USAcdn.makita.com/apps/cms/doc/prod/EM2/bb7ae1f3-e2dd...E02 220 68 219 67 E03 64. 2650...
Transcript of 250 - Makita USAcdn.makita.com/apps/cms/doc/prod/EM2/bb7ae1f3-e2dd...E02 220 68 219 67 E03 64. 2650...
EM2650LH
rev 21_01/08/15
EM2650LH 1 Throttle Handle
2rev 21_01/08/15
38
228
227
225
226
A08
4
5
38
39
40
41
42
43
4445
4647
48
49
50
5152
53 54
55
EM2650LH 1 Throttle Handle
3rev 21_01/08/15
Products with multiple versions are listed in subsiding order with the newest version on top not indented.Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
1 4 195143-2 HANGER SET 1 INC. 51 5 911233-1 PAN HEAD SCREW M5X20 11 38 126488-7 CONTROL LEVER ASS’Y 11 38 125776-9 CONTROL LEVER ASSEMBLY 1 INC. 39-551 39 266130-9 TAPPING SCREW BIND PT 3X16 11 40 451595-0 SWITCH COVER 11 41 451594-2 SWITCH LEVER 11 42 232251-9 LEAF SPRING 11 43 188832-6 LEVER CASE SET 1 INC. 551 44 346248-3 PIPE CLAMP 24 21 45 922218-2 H.S.H.BOLT M5X14 WITH WR 21 46 451593-4 LOCK LEVER 11 47 233541-3 TORSION SPRING 7 11 48 168571-4 CONTROL CABLE 11 49 233540-5 TORSION SPRING 11 11 50 451592-6 THROTTLE LEVER 11 51 638714-7 LEAD UNIT (LONG,MALE) 11 52 638713-9 LEAD UNIT (SHORT,FEMALE) 11 53 452071-7 CORRUGATE TUBE 11 54 266326-2 TAPPING SCREW 4X18 41 55 188832-6 LEVER CASE SET 1 INC. 431 225 346467-1 PIPE CLAMP 24 11 226 346468-9 PIPE CLAMP 33 11 227 452843-0 CLAMP COVER B 11 228 922243-3 HEX. SOCKET HEAD BOLT M5X25 21 A08 195626-2 LOOP HANDLE SET 1
EM2650LH
4rev 21_01/08/15
Shaft, Gear Case, Trimmer Head2
11
1615
14
23
19
24
25
20
17
18
10
A07
A07
Prior to product number 2023.
Product number 2023 and later.
Quick load trimmer head.
shallow counterbore
deep counterbore
9
6
7
8
218
A09
32
Prior to product number 2023.
A09 includes 229.
A09 includes 229.
Product number 2023 and later.
229
229
EM2650LH
5rev 21_01/08/15
Shaft, Gear Case, Trimmer Head2Products with multiple versions are listed in subsiding order with the newest version on top not indented.
Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
2 6 140431-2 SHAFT PIPE COMPLETE 12 7 890281-2 CAUTION LABEL 12 8 819312-8 MAKITA LOGO LABEL 12 9 324893-4 SHAFT 12 10 922218-2 H.S.H.BOLT M5X14 WITH WR 22 11 126102-5 GEAR CASE ASS’Y, EM2650LH 12 14 210049-4 BALL BEARING 609ZZ 12 15 961005-4 RETAINING RING S-9 12 16 962103-7 RETAINING RING R-24 12 17 922241-7 HEX. SOCKET HEAD BOLT M5X25 12 18 265590-2 +HEX.BOLT M8X10 WITH R 12 20 188902-1 CUTTER SHAFT SET 12 23 210115-7 BALL BEARING 6001LLU 12 24 962106-1 RETAINING RING R-28 12 25 331861-0 RECEIVE WASHER 12 32 346073-2 PROTECTOR CLAMP, EM2650LH 12 218 443170-6 FELT 12 229 266575-1 HEX. HEAD BOLT M6X30 22 A07 T-01753A BUMP & FEED TRIMMER HEAD 12 A07 T-01753 BUMP & FEED TRIMMER HEAD 12 A07 195149-0 CUTTER ASSEMBLY SET 12 A09 196117-6 PROTECTOR SET, EM2650LH 1 958292 A09 195780-2 PROTECTOR SET 1 Includes fig no. 229
EM2650LH
6rev 21_01/08/15
Insulater, Cleaner Base, Engine Cover3
6061
60
61
6263
64
69
69
70
70
125
126127
128129
130216
6263
65
65
67
66
68C10
C30C20
E02
E03
E01
Implemented March 2012.
Interchangeable as a set with Fig No. 60, 65, & 69.
Prior to March 2012
Prior to March 2012
Tech Bulletin 94237
71
7273
74
75
CylinderBlock
66 230E01
E02
22068
21967
E03
64
EM2650LH
7rev 21_01/08/15
Insulater, Cleaner Base, Engine Cover3
Products with multiple versions are listed in subsiding order with the newest version on top not indented.Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
3 60 126202-1 CLEANER COVER ASS’Y, EM2650LH 1 942373 61 125746-8 CLEANER COVER ASSEMBLY 1 INC. 613 61 265791-2 THUMB SCREW M4 13 62 443171-4 AIR CLEANER ELEMENT 13 63 443169-1 AIR CLEANER ELEMENT 13 64 266618-9 H.S.BUTTON HEAD BOLT M5X60 23 65 126198-6 CLEANER PLATE ASS’Y, EM2650LH 1 942373 65 126004-5 CLEANER PLATE ASSEMBLY 1 INC. 66-68, C10-C30, E01-E033 C10 162322-7 SEPARATOR STOPPER 13 C20 162325-1 SEPARATOR GASKET 13 C30 352013-0 SEPARATOR NET 13 66 162346-3 SEPARATOR PLATE 13 66 162324-3 SEPARATOR PLATE 13 67 213540-1 O RING 15 13 68 424316-3 CHECK VALVE 23 69 422099-9 PIPE 1 942373 69 422062-2 PIPE 13 70 325665-0 JOINT PIPE 13 71 442153-3 CARBURETOR GASKET 13 72 922228-9 H.S.H.BOLT M5X18 WITH WR 23 73 451825-9 CLAMP 13 74 451729-5 INSULATOR 13 75 213547-7 O-RING 12 13 125 638707-4 LEAD UNIT 13 126 638708-2 LEAD UNIT 13 127 808633-3 4STROKE INDICATION LABEL 13 128 922218-2 H.S.H.BOLT M5X14 WITH WR 13 129 453266-5 CYLINDER COVER, EM2650LH 13 129 451734-2 CYLINDER COVER 13 130 922218-2 H.S.H.BOLT M5X14 WITH WR 13 216 891985-9 INDICATION LABEL 13 219 352020-3 SEPARATOR MESH, EM2650LH 13 220 453865-3 SEPARATOR CASE, EM2650LH 1
EM2650LH
8rev 21_01/08/15
Insulater, Cleaner Base, Engine Cover3
Products with multiple versions are listed in subsiding order with the newest version on top not indented.Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
3 230 266007-8 TAPPING SCREW BIND PT 3X10 13 E01 266427-6 TAPPING SCREW 4X12 13 E02 452219-1 CHOKE PLATE 13 E03 452220-6 CHOKE LEVER 1
EM2650LH
9rev 21_01/08/15
4 Clutch, Flywheel, Starter Assembly
122
183
184
185
187188
189190
191192
193
194196
36
34
89
90
9192
9394
95
9697
98
99100
101102
103
104105
106107
131 132 133
134
135
136
EM2650LH
10rev 21_01/08/15
4 Clutch, Flywheel, Starter Assembly
Products with multiple versions are listed in subsiding order with the newest version on top not indented.Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
4 34 819432-8 CAUTION TAG 14 36 819766-9 EM2650LH MODEL NO.LABEL 14 89 451735-0 CLUTCH CASE 14 90 922228-9 H.S.H.BOLT M5X18 WITH WR 34 91 450569-8 SPACER 14 92 961052-5 RETAINING RING S-12 14 93 210111-5 BALL BEARING 6201LLU 14 94 962151-6 RETAINING RING R-32 14 95 168809-7 CLUTCH DRUM 1 986764 95 168609-5 CLUTCH DRUM 14 96 266457-7 SHOULDER HEX. BOLT M6X25 24 97 267817-6 WASHER 8 24 98 125518-1 CLUTCH ASSEMBLY 1 INC. 99,1004 99 168498-8 CLUTCH SHOE 24 100 231858-8 TENSION SPRING 6 14 101 267812-6 WASHER 6 24 102 264039-9 FRANGE NUT 14 103 318569-3 FLYWHEEL 14 104 444021-6 TUBE 14 105 266602-4 HEX. SOCKET HEAD BOLT M4X20 24 106 452049-0 SPACER 24 107 168559-4 IGNITION COIL 14 122 168483-1 PULLEY 14 131 424082-2 BUFFER RUBBER 14 132 922211-6 HEX. SOCKET HEAD BOLT M5X12 14 133 922226-3 HEX. SOCKET HEAD BOLT M5X18 24 134 318249-1 PIPE HOLDER 14 135 318250-6 PIPE HOLDER 14 136 424083-0 BUFFER RUBBER 14 183 195308-6 RECOIL STARTER SET, EM2650LH 14 183 125752-3 RECOIL STARTER ASSEMBLY 1 INC. 122,184,185,187-1934 184 424319-7 STARTER KNOB 14 185 424359-5 DAMPER 1
EM2650LH
11rev 21_01/08/15
4 Clutch, Flywheel, Starter Assembly
Products with multiple versions are listed in subsiding order with the newest version on top not indented.Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
4 187 266585-8 TAPPING SCREW 5X12 14 188 325923-4 SWING ARM 14 189 451938-6 COLLAR 14 190 451937-8 REEL 14 191 232258-5 SPIRAL SPRING 14 192 444023-2 STARTER ROPE 14 193 451733-4 STARTER CASE 14 194 922223-9 H.S.H.BOLT M5X16 WITH WR 44 196 816565-0 MAKITA LOGO LABEL 1
EM2650LH
12rev 21_01/08/15
Piston, Cylinder, Muffler5
142
145
146
147
140
13888
7677
78 79
80
8182
83
84
85
8687
137
108109
110
112113
114115
116
117
118
119
120121
123 124
143
144(set)
148
149
151152
153154
155159
160161
162163 164Included in Short Block Assembly Fig. No. 320.###
165
166
167168 169
170
171172
320
156
157158
150
Insulator
142
145146
147
140
138
137
85
8687
88
108109
110112
113114
115
116
117
118
143
149
151152
153154
150
EM2650LH
13rev 21_01/08/15
Piston, Cylinder, Muffler5Products with multiple versions are listed in subsiding order with the newest version on top not indented.
Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
5 76 422109-2 BREATHER PIPE 15 76 422055-9 BREATHER PIPE 15 77 345918-1 HOSE CLAMP 15 78 318745-9 ROCKER COVER OUTER 15 79 922222-1 HEX. SOCKET HEAD BOLT M5X16 45 80 452795-5 ROCKER COVER INNER 15 81 162304-9 ROCKER COVER GASKET 15 82 424302-4 PLUG CAP 15 83 324891-8 PLUG CAP SPRING 15 84 168534-0 SPARK PLUG 15 85 125554-7 ROCKER ARM ASSEMBLY 25 86 256200-2 PIN 5 15 87 256865-0 ROD 2.5 25 88 325668-4 SPRING RETAINER 25 108 268238-5 PIN 5 15 109 125552-1 CAM GEAR ASSEMBLY 15 110 313169-4 CAM LIFTER 25 112 268239-3 PIN 4 15 113 162274-2 CAM GEAR COVER GASKET 15 114 318443-5 CAM GEAR COVER 15 115 922222-1 HEX. SOCKET HEAD BOLT M5X16 35 116 135478-9 CYLINDER BLOCK ASSEMBLY 1 INC. 1175 117 922222-1 HEX. SOCKET HEAD BOLT M5X16 65 118 424201-0 CHECK VALVE 25 119 346331-6 MUFFLER GASKET 15 120 168554-4 EXHAUST MUFFLER 15 121 266440-4 HEX SOCKET HEAD BOLT M5X40 25 123 451731-8 MUFFLER PLATE 15 124 922218-2 H.S.H.BOLT M5X14 WITH WR 15 137 424200-2 SPACER, EM2650LH 25 138 234108-0 COMPRESSION SPRING 9 25 140 325669-2 EXHAUST VALVE 15 142 257298-2 PISTON RING (TOP) 34 1
EM2650LH
14rev 21_01/08/15
Piston, Cylinder, Muffler5Products with multiple versions are listed in subsiding order with the newest version on top not indented.
Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
5 143 325670-7 INTAKE VALVE 15 145 257299-0 PISTON RING (SECOND) 34 15 146 257300-1 PISTON RING 34 15 147 318441-9 PISTON 15 148 254040-2 WOODRUFF KEY 3 15 149 126359-8 CRANK SHAFT ASSEMBLY 1 INC. 150-1525 149 135481-0 CRANK SHAFT ASS’Y 15 150 213148-1 OIL SEAL 10 15 151 267400-9 FLAT WASHER 23 15 152 213147-3 OIL SEAL 12 15 153 257781-9 PISTON PIN 15 154 233976-8 CLIP 25 155 162345-5 OIL CASE GASKET, EM2650LH 15 155 162323-5 OIL CASE GASKET 15 156 346083-9 LEAD VALVE 15 157 318590-2 RETAINER PLATE 15 158 922112-8 HEX. SOCKET HEAD BOLT M4X10 15 159 318588-9 OIL CASE 15 160 922222-1 HEX. SOCKET HEAD BOLT M5X16 45 161 424344-8 DAMPER 15 162 346305-7 GASKET 15 163 266611-3 HEX BOLT M6X8 15 164 213548-5 O-RING 20 15 165 325665-0 JOINT PIPE 15 166 282020-8 HOSE CLAMP 15 167 325666-8 OIL WEIGHT 15 168 424301-6 OIL TUBE 15 169 452047-4 OIL CAP 15 170 424343-0 GASKET 15 171 452048-2 OIL PIPE 15 172 922218-2 H.S.H.BOLT M5X14 WITH WR 25 320 135599-7 SHORT BLOCK ASSEMBLY 0 Y06451
EM2650LH
15rev 21_01/08/15
Fuel Tank, Carburetor6173
175
176177
178
179
180
181
182
215
207
213
212
211
214
209
208
205
203
206
202
197
198199
200 201
204
210
EM2650LH
16rev 21_01/08/15
Fuel Tank, Carburetor6Products with multiple versions are listed in subsiding order with the newest version on top not indented.
Corresponding technical bulletins are attached.
Tech
Bul
letin
NotesSect
ion
Fig.
No.
Part No. Description EM26
50LH
6 173 125728-0 FUEL TANK CAP ASSEMBLY 1 INC. 1746 175 168755-4 TUBE CPL., EM2650LH 1 937666 176 282020-8 HOSE CLAMP 16 177 163518-3 GASOLIN FILTER 16 178 452249-2 FUEL TANK 16 179 424080-6 BUFFER RUBBER 26 180 424081-4 BUFFER RUBBER 16 181 451737-6 TANK GUARD 16 182 922218-2 H.S.H.BOLT M5X14 WITH WR 46 197 168762-7 CARBURETOR, EM2650LH 1 944416 197 168591-8 CARBURETOR 1 INC. 198-207,209-2146 198 325922-6 SWIVEL 16 199 413140-9 WASHER 16 200 266581-6 PAN HEAD SCREW M3X8 WITH W 26 201 257964-1 STOP RING E-3 16 202 213538-8 O RING 2 16 203 325985-2 JET 16 204 234183-6 CONICAL COMPRESSION SPRING 5-9 16 205 442155-9 PUMP GASKET 16 206 168575-6 PUMP DIAPHRAGM 16 207 140437-0 PUMP BODY 16 208 352010-6 INLET SCREEN 16 209 442154-1 METERING DIAPHRAGM GASKET 16 210 168620-7 METERING DIAPHRAGM 16 211 140438-8 AIR PURGE BODY 16 212 424314-7 PRIMER PUMP 16 213 346270-0 PRIMER PUMP COVER 16 214 266582-4 TAPPING SCREW 3X24 46 215 810455-9 CAUTION PLATE 1
ECHNICAL INFORMATION
For Models
Country
Description
T 93766November 2011
Change of Tube complete
EJ2650LHG, EJ2651WHG, EM2650LH, EM2650UH, EM2651LH, EM2651UH, EN5550SH,MS246.4C, MS246.4CE, MS246.4U, MS246.4UE
EJ2650LHG, EJ2651WHG: BrazilEM2650LH: Argentina, Australia, Brazil, Chile, Colombia, Hong Kong, Italy, Mexico, New Zealand, Panama, USA EM2650UH: Argentina, Australia, Austria, Brazil, Chile, China, Colombia, Italy, Malaysia, Mexico, New Zealand, Panama, Poland, Saudi Arabia, Singapore, USAEM2651LH: Canada, France, Germany, Spain, UKEM2651UH: Austria, Canada, Chile, France, Germany, Netherlands, Poland, Russia, Spain, Sweden, UKEN5550SH: Canada, USAMS246.4C: Italy, USAMS246.4CE: France, Germany, SpainMS246.4U: Austria, Italy, Poland, USAMS246.4UE: Austria, France, Germany, Netherlands, Poland, Spain, Sweden, USA
Subject
Current part New part NoteQ'tyI/CQ'ty
Interchangeability(I/C)
Item No.
1Tube complete168755-4
Tube complete168555-2
Implementation
From September 2011 MBR, MCA and MKC production
Tube complete has been changed as drawn below.
1175
Interchangeability mark; The arrow means that the new part can be substituted for the current.
Current New
YellowYellow
Black
ø4.0
ø5.0ø5.0
Black
ECHNICAL INFORMATION
For Models
Country
Description
T 94237March 2012(Page 1 of 2)Change of Engine parts
EJ2650LHG, EJ2651WHG, EM2650UH, EM2651UH, EM2650LH, EM2651LH, EN5550SH,MS246.4U, MS246.4UE, MS246.4C, MS246.4CE
All countries
Subject
Engine parts have been changed / added.See below and next page.
Interchangeability(I/C)
157
060
069
Current part New part NoteQ'tyI/CQ'tyItem No.
1Cleaner cover assembly126202-1
1No1318910-0
Cleaner cover assembly
Retainer plate318590-2Retainer plate
PipePipe
Rocker cover innerRocker cover inner
Cleaner plate assemblyCleaner plate assy
Cleaner plate assemblyCleaner plate assembly
125746-81 No
No
No
1422099-9422062-2
1
080
065
1453860-3452795-5 1
1
126197-8126003-7 1
065
066
1
126198-6126004-51
Separator plate162324-3
1
No
No Brazil only
All countriesexcept Brazil
1Separator plate162346-3
1Separator mesh352020-3
1Separator case453865-3
068 2Check valve424316-3
Check valve424316-3 1 No
No
1 No
No
149 1Crank shaft ass’y126204-7
Crank shaft ass’y135481-0
1267400-9Flat washer 23
267400-9Flat washer 23
7
6
12
1
8
9
10
13
14
11
2
1
No1
No1
151
1Oil seal 12213147-3
Oil seal 12213147-3
5 152
See listedbelow
See listedbelow
See listedbelow
1Oil case plate453862-9
155 1Oil case gasket
Interchangeableas a set
162345-5Oil case gasket
EJ2650LHG
220
221
222
218
219
220
219
220
221
231
232
233
227
228
229
263
264
265
EJ2651WHG EM2650UH, EM2651UH,MS246.4U, MS246.4UE
EM2650LH,MS246.4C
EM2651LH,MS246.4CE EN5550SH
162323-5
16
15
Item Nos. of 13 14 16
13
14
16
4
Interchangeableas a set
Interchangeableas a set
No1503Oil seal 10213148-1 1
Oil seal 10 Treat theirparts as the como-nents of Crank shaftass’y 126204-7.
213148-1 1
94237(Page 2 of 2)
Rocker cover innerDiameter of two holes is changed from 2mm to 1.5mm.
1
Crank shaft assembly2
Retainer plate6
Cleaner cover assembly
for brazil, except for brazil
7
10 Separator plate
13 Separator mesh: added
14 Separator case: added
15 Oil case gasket
15 Oil case plate: added in Oil case
Cleaner plate assembly
In addition to minor change, another boss is added as shown below.
12Boss is changed to two bossesto connect .
89
12 Pipe (Refer to .)8 9
Direction of Ball bearing is changed.
Diameter of two holes is changed from 1.8mm to 2.3mm.
A part of Ribsare eliminated.
ECHNICAL INFORMATION
For Models
Country
Description
T 98676Subject
Current part New part Note
January 2013
Q'tyItem No. I/CQ'tyClutch drum168609-5
Clutch drum
Change of Materialof Boss portion
Welding
168809-7095 Yes1 1
Implementation
Interchangeability(I/C)
Modification of Clutch drum
All countries
Makita: EM2650LH, EM2650UH, EM2651LH, EM2651UH, EJ2650LHG, EJ2651WHG, EN5550SH DOLMAR: MS246.4C, MS246.4CE, MS246.4U, MS246.4UE, MS256.4C
Current New
Clutch drum has been modified to increase its durability.
After the current parts in stock are cleared
ECHNICAL INFORMATION
For Models
Country
Description
T Y06451Subject
June 2013
Interchangeability(I/C)
Short block assembly
All countries
Short block assembly has become available.It is factory-assembled with the following Item Nos.in Parts breakdown.
Current partCS246.4C: 236EJ2650LHG: 223EJ2651WHG: 221EM2650LH: 224EM2650UH: 235EM2650UHN: 237EM2651LH: 232EM2651UH: 235EM2652LHN: 235EN5550SH: 267ER2650LH: 236EX2650LH: 236EX2650LHG: 236LT246.4: 236MS246.4C: 224MS246.4CE: 232MS246.4U: 235MS246.4UE: 235MS256.4C: 234
New part NoteQ'tyShort blockassembly 25.4CC135599-7
1
Item No.
See Note.
I/CQ'ty
144
145146
147
140
138
137
85
8687
88
108109
110112
113114
115
116
117
118
143
149
151152
153154
150
DOLMAR: CS246.4C, LT246.4, MS246.4C, MS246.4CE, MS246.4U, MS246.4UE, MS256.4CMakita: EJ2650LHG, EJ2651WHG, EM2650LH, EM2650UH, EM2650UHM, EM2651LH, EM2651UH, EM2652LHN, EN5550SH, ER2650LH, EX2650LH, EX2650LHG,
ECHNICAL INFORMATION
For Models
Country
Description
T 94441March 2012
Change of Carburetor, Clutch assembly
EJ2650LHG, EJ2650WHG, EM2650LH, EM2650UH, EM2651LH, EM2651UH, EN5550SH, ER2650LH, LT246.4, MS246.4C, MS246.4CE, MS246.4U, MS246.4UE
All countries
Subject
Current part New part NoteQ'tyI/CQ'ty
Interchangeability(I/C)
Item No.
1168762-7
Carburetor Carburetor
Carburetor Carburetor168591-8
The following changes have been implemented to improve idling stability of Engine type-EH026.
1197
1168610-0 168763-5
126135-0Clutch assembly Clutch assembly125518-1Tension spring 6231858-8
Immediately upon completion of preparation.
All models for U.S.A., Canada: From December 2011 production.All models for all countries except above: From January 2012 production
Tension spring 7231881-3
1197
11098
11100
Interchangeability mark; The arrow means that the new part can be substituted for the current.
All countries except Brazil
Brazil
The component of
1
2
3
34
1
2
34
Change of Carburetor (for all countries except Brazil)• Hole size has been enlarged to prevent accumulation of air.
• Tension spring 6 has been changed to strength type of Tension spring 7. Due to this change, the parent part of “Clutch Assembly” also has been changed.
Engraved mark is changed: WYL287 → WYL287A
for Fuel-E0 gasoline
for Fuel-E25 gasoline
1
2
3 4
Change of Carburetor (for Brazil)
Change of Clutch assembly, Tension spring
• Hole size has been enlarged to prevent accumulation of air.
Engraved mark is changed: WYL286 → WYL286A
The surface treatment of Spring has been changed from“Ferrosoferic oxide coating (black)” to “Unichrome plating (Silver)”.
ImplementationEM2650UH, EM2650LH, EN5550SH for U.S.A., Canada: From December 2011 production.MS246.4U, MS246.4C for U.S.A.: From December 2011 production.All models for all countries except above: Immediately upon completion of preparation.
ECHNICAL INFORMATION
For Models
Country
Description
T 95829April 2012
Change of Protector set
EM2650LH
USA
Subject
Protector set has been changed as drawn below.
The cover area becomes narrow.
Current part New part NoteQ'tyItem No. I/CQ'ty
Interchangeability(I/C)
1196117-6Protector set
1195780-2Protector set
A09
ImplementationFrom August 2012 MCA production
Interchangeability mark; The arrow means that the new part can be substituted for the current.
Current New