Project:

Proposed three Town Houses

25 Wilmoth St ,Thornbury

Stage:

Interior Design Package

Rev A

Municipality:

Client:

Mr Abou-Eid

23 July 2015

25 WILMOTH ST

Darebin

FOR CLIENT'S APPROVAL ONLY

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A01

Finishes Palette

MATERIALS SCHEDULEMATERIAL FINISHES SCHEDULE

Disclaimer: Similar or equivalent product may be substituted subject to client's approval

1. Timber flooring -FORMICA engineered oak /Natural Finish2. Kitchen Splash back -ACADEMY TILES/ 834163. Kitchen joinery- LAMINEX/ Gunmetal4. Kitchen joinery- LAMINEX/ Polar White5. Bench Top- QUARTZ STONE - Pietra Serena Quartz6. Bedroom carpet - GODFREY HIRST CARPETS/100% wool loop pile/Caribbean : Barbados7. Bathroom shower wall -ACADEMY TILES/ Como Grey 45x45 - NT2-160FL8. Bathroom Floor -NATIONAL TILES/ Como Grey 45x45 - NT2-160FL

1 2 3 4

5

6 8

FOR CLIENT'S APPROVAL ONLY

7

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A02

Fittings and Fixtures

FIXTURES & FITTINGS SCHEDULEMATERIAL FINISHES SCHEDULE

1. CAROMA- Basa Inset Basin2. CAROMA- Urbane Wall Faced Close Coupled Suite3. CAROMA- Essence Rail Shower with Overhead4. CAROMA- Saracom Tower Basin Mixer5. CAROMA-Liano Toilet Roll Holder6. CAROMA- Liano Towel Ring7. CAROMA- Liano Double Towel Rail8. CAROMA- Liano Nexus Sink Mixer - Chrome9. CLARK-Pete Evans double bowl10.CLARK- Eureka 45 Litre Standard Tub & Cabinet

Disclaimer: Similar or equivalent product may be substituted subject to client's approval

1 2 3

4 5 6 7

8 9 10

FOR CLIENT'S APPROVAL ONLY

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A03

Light Schedule

LIGHTING SCHEDULEDisclaimer: Similar or equivalent product may be substituted subject to client's approval

NOMINATION DESCRIPTION LOCATION MANUFACTURER NOTES & DIMENSIONS SAMPLE IMAGESPECIFICATIONS

E.01 Feature Pendant LightKitchen 1

Replica DiamondPendant Lamp bySebastian Scherer

Diameter: 350mmHeight : 350mmSuspension: 1800mm Light Drop Pendant

SYMBOL

Kitchen 3

Kitchen 1

E.02 LED downlight BedroomsBathroomsLaundryMeals Area

Diameter: 10mm X 55mm DeepCut out size: 88mmHeight: 153mm

E.03 LED Strip Light Bathroom mirrorsUnits 1,2&3

Red Square Roll Length 5000mmCutting Interval 50mm

Standard Output 12vWeatherproof Ribbon

E.04 External WallsUnits1,2&3

E.05 Exterior Lightcourtesy light

Front YardUnits 1,2&3

Beacon LightingLucci LEDlux

Diameter: 120mmHeight : 450mmFairhaven Small Pathlight in

Stainless Steel with Opal Diffuser -

E.06 Florescent Light GarageUnits 1

Beacon LightingLucci Décor

Diameter: 345mmHeight : 28mmSuspension: 43

Linea 14W UndershelfFluorescent in White

Alert II 1 Light Floodlight with Sensorin Black

External Flood Light Beacon Lighting Width: 220mmDepth: 120mm

FOR CLIENT'S APPROVAL ONLY

Beacon LightingLucci Mason

Down Light

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A04

Appliances Schedule

APPLIANCES SCHEDULEDisclaimer: Similar or equivalent product may be substituted subject to client's approval

APPLIANCES SCHEDULEUNITS 2 & 3

Disclaimer: Similar or equivalent product may be substituted subject to client's approval

1. Cooker with multifunction Oven and Gas hob- SMEG/ SUK61MX8 -60cm"Concert"2. fully Integrated Dishwasher -SMEG /DI6012-1 60cm A+A Rated3. Canopy Hood, Stainless Steel- SMEG/ mod: KSEG54X-1 54cm

1 2

3

FOR CLIENT'S APPROVAL ONLY

NOMINATION DESCRIPTION LOCATION MANUFACTURER NOTES & DIMENSIONS SAMPLE IMAGE

HW.01 Door Stop All internal Doors Lemmar 45mmChrome Plate

SPECIFICATIONS

SQUARE DOOR STOPID: #50800

HW.02 Flush pull All internal Cavity Doors Lemmar 120x40mmPolished Stainless Steel

RECTANGLE FLUSH PULLID: #55426

HW.03 Lever Set All internal swing Doors Lemmar LEVERSETS / ROUND 53mmID: #10037

HW.04 Lock set All External Doors Lemmar 65 mm Round Backplate/Rosette

Chrome Plate

LOCKSETS / LEVER LOCKSETSID: #22000

65 mm Round Backplate/Rosette

Chrome Plate

HW.05 Hinges All Doors Lemmar 100 x 100 x 2.5mmPolished Stainless Steel

STAINLESS STEEL LOOSEPIN 100 x 100ID: #41112

HW.06 Escutcheon All Doors Lemmar 100 x 100 x 2.5mmPolished Stainless Steel

ROUND OVAL ESCUTCHEON

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A05

Hardware Shcedule

HARDWARE SCHEDULEDisclaimer: Similar or equivalent product may be substituted subject to client's approval

FOR CLIENT'S APPROVAL ONLY

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A06

Kitchen 3D

3D IMAGES FOR CLIENT'S APPROVAL ONLY

LOCATION:

CLIENT:

Architectural drawings are to be read in conjunction with all consultants and engineers drawings and details. Do not scale drawings, use figured dimension. If in doubt ask, do not guess. Contractors must verify all dimensions on site before commencing any work or preparing shop drawings. Any discrepancies must be reported to the architect for clarification and approval in writing.

DATE:

JOB N°:

SCALE:

PROJECT:

AMENDEMENT:

N° in SET:

(03) 948 483 28

copyright of C. Kairouz Architects. prior written permission is necessary for reproduction.

A07

Bathroom 3D

3D IMAGES FOR CLIENT'S APPROVAL ONLY