21732 GMS Map productoverzicht - ShipServ · to provide over pressure protection. The PC6-IS is the...

Co

nte

nt

Content Page

Calibration equipment 2

Diagnostic equipment 6

Engine Monitoring 14

Instrument valves 17

Gasdetection 19

Flow & level 21

Pressure 22

Temperature 25

Various 33

Filters 37

1

Cal

ibra

tio

neq

uip

men

t

Low cost version.

Wide temperature range

(-30°C up to +850°C).

Adapter sleeves up to 15 mm

(option 25 mm).

Temperature calibrator Standard series TP 18 000

Low cost version.


(-30°C up to +850°C).

Adapter sleeves up to 15 mm

(option 25 mm)

Temperature calibrator Standard series TP 18 000


(-30°C up to +850°C).

High-performance

software package.

Switchable tempera-

ture sensor input.

Temperature calibrator Precision Series TP 28000

Laboratory accuracy.

Stabilize the heating block

temperature to +/- 0, 03 K.

Display range -30°C to

+450°C in 1 /100 resolution.

High precision temperature Calibrator series TP 28 000S

No more burnt fingers!

1300 °C portable.

High-temperature from

200 °C -1300 °C.

High-temperature Calibrator series TP281300

Flow ranges 1 to 40 l/min.

Nominal bore DN 15.

Accuracy ± 1% of indicated value

Flow Calibrator Series VP 18000

Offers features as Laboratory

class equipment. In temperature

mode the tinydevice can

measure with a resolution of

0,01 °C and an accuracy of

± 0,03 °C. In standard signal

mode pressure (shown in bar,

mbar o psi), humidity

(shown in % RH)

and current

(shown in mA)

can all be measured.

Microtemp TT 7200 General purpose sensor

2

Fast response sensor

Surface sensor

Spike sensor

Gas temperature sensor

Cal

ibra

tio

neq

uip

men

t

3

Low pressure Test pump LTP1

Pressure calibrator PC6

Output Pressure: 0 to 2000 mbar,

30 psi. Output Vacuum:

0 to -850 mbar, 0 to -25 in Hg.

Materials: Bright nickel plated

brass, clear anodised aluminium.

Adjustment: Fine volumetric

pressure/vacuum adjuster with 0.1mbar,

better than 0.00145 psi sensitivity.

Pressure measurement range -1

to 1000 bar + psi • Voltage and

current measurement • Simul-

taneous display of pressure

and selected function • Timed/

Event data storage • RS232 data

communication link Pressure

switch test Leak rate measure-

ment 1 second to 999 days

Pressure test system TP1 -1 to 40 bar, -14.5 to 580 psi

Pressure calibrator PC6-IS INTRINSICALLY SAFE

EEx ia IIC T4

Used for calibration checks on

pressure transmitters, pressure

switches, indicators, recorders and

controllers. Adjustable stroke

to provide over pressure protection.

The PC6-IS is the Intrinsically

Safe version of our popular PC6

Pressure Calibrator specifically

designed for use in Hazardous

Environments such as those

found in the offshore and petro-

chemical industries.

HTP1 pressure test system 1000 bar, 15 000 psi Hydraulic Pressure (oil or water)

Digital pressure gaugeLEO 2 highly accurate

Lightweight, hand held and easy

to use. Quick priming and pressure

generation using scissor action

pump. High pressure/priming

selector. Fine adjustment control.

Pressure release valve.

Accuracy • 0,1 % FS typ. 0,2 %

FS max. Compensated

Temperature. Range 0…50 °C

Supply 3 V battery. Battery

Life 1’000 hours continuous

operation. Pressure

Connection adapter G 1/4”

Protection, CEI 529 IP 65

Diameter x Height x Depth

59 x 95 x 32 mm.

Marine calibration kit MCK 40/200

Marine pressure calibrator from -1 till

40 bar. Analog test gauge for pressure

switch test. Digital test gauge

for testing pressure instruments,

(0,1% accuracy). Marine temperature

calibrator till 200 °Celsius.

Optional:

range up 1000 bar and 600°C

order sample MCK40/600

Advanced marine calibration kitAMCK 40/200

Marine pressure calibrator from -1

till 40 bar. Digital calibrator for

testing and calibrating pressure

gauges, transmitters, switches

Temperature calibrator till 200°C.

Multi function Calibrator for

reading and sourcing of Pt100,

thermocouples, mA and Volt.

Optional:

range up Tto 1000 bar and 600°C order sample AMCK 700/600

Cal

ibra

tio

neq

uip

men

t

Portable multifunction calibrator TRX II Series

Deadweight testers 2000 Series

4

Pressure calibratorFluke 717

Temperature calibrator Fluke 724

Pressure calibratorFluke 718

Thermocouple calibrator Fluke 714

Calibrator Fluke 712 RTD

Multifunction process calibrator Fluke 725

Take along the new Fluke 725.

Multifunction Process Calibrator,

and you’re equipped to test

and calibrate almost any process

parameter. Measure and source

mA, volts, temperature (RTDs

and thermocouples), frequency,

ohms, and pressure, using optional

pressure modules.

is a hydraulic hand operated

unit that provides a quick

and cost effective means of

comparing readings between,

for example, a test gauge

and a standard pressure gauge,

pressure switch, etc.

Specification:

Range: 0-700bar/10,000psi Case: Cast aluminium Priming: Direct

via ram screw. Weight: 5 kg. Dimensions: 340 x 380 x 150mm.

Consists of 3 precision pressure

gauges (class 0.6) a hydraulic

handpump fitted with hose, valve

and couplings, all delivered in

a handy plastic box. The testset

fulfils the requirements of most

classifications societies. Range

pump Maximum working pressure 350 bar. Pressure gauges

160 mm. Ø. ranges 0-6, 0-16 and 0-40 bar. Accuracy Class 0.6

Optional Pressure gauges with other ranges.

Pressure calibrator PCS Comparison test pump

The TRX II portable documenting calibrator for combined

field work with the Druck and Unomat series of

calibrators. Typical accuracies: 0.01% reading ±0.01% FS for

mA measurement. 0.05% FS for pressure

measurement. Measure:

mA, mV, volts, T/C’s,

RTD’s, pressure, ohms,

frequency and switch

state. Source: mA, mV,

volts, T/ C’s, RTD’s, ohms

and frequency.

Range: 1 to 700 bar,

15 to 10 000 psi or

(kg/cm2 also available)

Standard accuracy:

0.025% of reading.

0.015%, 0.1% options.


Range: -1 bar to 40 bar,

-15 to 600 psi (kg/cm2

also available). Higher

accuracy: 0.01% of

reading. Standard accu-

racy: 0.025% of reading.


Range: 1-5000 bar,

15-75 000 psi (kg/cm2

also available) Higher

accuracy: 0.015% of

reading. Standard accu-

racy: 0.025% of reading.

Cal

ibra

tio

neq

uip

men

t

5

Digital multimetersFluke 73/77

Digital multimeters 80 Series III

High contrast digital display with large

digits, 0.3% basic accuracy Analog

bargraph/segments Auto and Manual

ranging Automatic Touch Hold® Audible

continuity/diode test Ergonomic case

with integrated holster “Classic” design

with removable holster Sleep Mode

preserves battery life

AC True RMS measurements

(Fluke 85 III, Fluke 87 III) Digital display

with bargraph and backlight Min/max/

average recording Resistance, conduc-

tance, continuity and diode measure-

ments Easy battery access without

breaking the calibration seal Input alert

warns when the leads are in the

wrong inputs “Classic” design with

removable holster Lifetime warranty.

Digital multimeters Fluke 170 series

Digital multimeters Fluke 187/189

The three models of the new 170 Series are

the new benchmarks for general purpose

multimeters. Combination of precision,

features, ease-of-use, and reliability.

True RMS voltage and current measure-

ments. 6000 count resolution Manual

and automatic ranging Frequency and

capacitance measurements Resistance,

continuity and diode measurements

Temperature measurements (179).

Extremely fast readings True RMS AC +

DC measurements 100 kHz AC bandwidth

for voltage and current Frequency,

capacitance, duty cycle & pulse width

measurements Resistance, conductance,

continuity and diode measurements

Temperature and dBV/dBm with

selectable reference Readings memory

for up to 100 readings

Graphical multimeter Fluke 867B

ProcessMeter™ Fluke 787

The Fluke 867B GMM Gives You the

Big Picture Six test tools in one.

Display Sample Measurements

Waveform Display to 1 MHz Safety-

rated to 1000V Digital Display/Counts

Selectable True-rms or Average

Sensing Continuity/Conductance/

Capacitance Min/Max/Average with

Time Stamp Relative Mode.

Precision 1000V, 440 mA digital multi-

meter Measure ac and dc volts, ac and

dc current, resistance, continuity, and

frequency 0.1% dc voltage accuracy

0.05% dc current accuracy, 1 ‘A resolution

to 30 mA Simultaneous mA and %

of scale readout. True rms ac voltage

measurement to 1 kHz DC current

source/loop calibrator·20 mA current

source/simulator. Simultaneous mA

and % of scale readout.

Industrial scopemeter Fluke 123

ScopeMeter 123 meets today’s need

of simultaneously measuring and

checking waveforms.

ScopeMeter 190 Series

high-performance oscilloscopes offer

specifications found on top-end bench

instruments. With up to 200 MHz band-

width, 2.5 GS/s real-time sampling and

a deep memory of 27,500 point per input.

Meters 321 and 322 Fluke Clamp

Measure the presence of load

current, AC voltage and continuity

of circuits, switches, fuses and

contacts Measures AC current to

400 A Measures AC volts to 600 V.

Fluke 330 SeriesA choice of five models gives

you the right functions for your

measurements.

Dia

gn

ost

iceq

uip

men

t

LEMAG PREMET XL with TDC Sensor

The PREMET XL with TDC Sensor

6

Peak pressure indicator LEMAG

DELTA - PREMET LEMAG

Designed to measure cylinder

pressure drop to highlight wrong

valves and piston rings at a very

early stage. This is achieved by

measuring the individual pressure

drop of each cylinder. It is a simple,

convenient check and can prevent

major damage to the engine.

With high gauging accuracy

to measuring the firing pressure

of internal-combustion engines,

specially of medium and

high speed diesel engines.

Type LS140, 180, 220 or 250 bar.

Records cylinder peak pressure.

The accurate peak pressure gives

valuable information on engine

condition and is indispensable

in optimising engine output,

and in balancing cylinders.

Records cylinder pressure against

time. The accurate pressure

curve gives valuable information

on engine condition and is

indispensable in optimising engine

output, and in balancing cylinders.

The PREMET LS allows also for

easy verification of the injection/

combustion process in each cylinder.

Electronic diesel engine indicator PREMET LS

Electronic peak pressure indicator PREMET L

Mobile and compact electronic

diesel engine indicators. It records

cylinder pressure in relation to the

crankshaft angle. The accurate

pressure curve gives valuable infor-

mation on engine condition and is

indispensable in optimising engine

output, and in balancing cylinders....

.....additionally features of perfor-

mances the calculation of the indi-

cated values and correspondence

between crank angle and pressure.

Ideally the system is used in

regular intervals, after major engine

repairs and after bunkering.....

Pressure tester-type CB 250LEMAG

Portable measuring device for

check the accuracy of our indicators

and many other applications.

No problem any longer

to connect and test your

indicators. Operation

of the LEMAG Pressure.

Tester Type CB 250

can be done either

with liquids or gas.

PREMET XL LEMAG with TDC Sensor

........... samples

Dia

gn

ost

iceq

uip

men

t

7

indicatorsLEMAG type 30

indicators type 50-M3 LEMAG

For the drawing of indicator

diagrams on medium and fast

speed diesel engines.

At a speed range of up

to 400 rpm it has the highest

resolution. more

Redsign of the well known

M2 series. They are for use to

draw diagrams on slow speed.

Diesel engines (<= 250 rpm).

The LEMAG type 50-M3

is available for pressure ranges

up to 300 Bar. The pressure

ranges are acc. to newest engine

developments.

High speed indicator LEMAG type 25-M

LEMAG

Can be operated in cases

where for indicators the rpm

or the pressure-change rates

are too high for indicators

type 30-M or type 50-M.

By it’s special construction

it has become possible

to receive faultless diagrams

of motors, which have more

than 1.000 rpm.

Fiberoptic inspection tool

Fiberoptic inspection tool

Allows you to see into inaccessible places.

ProVision offers the same high-performance

and results as tools costing 10 times

as much. The high resolution lens provides

a clear image of objects as close as 3/4 inch

and over one foot away while providing

a wide 40 degree field of view. A powerful

lamp illuminates dark crevices

Allows you to see into

inaccessible places.

Diameter of 8mm at tip of

insertion end, and 10mm

with side view adapter

attached allow you to get

into tight locations.

Microscoop probe tube

Magnifier with small light

probe on battery,

for internal inspection,

complete with mirror.

Inspection flashlight

Inspection mirror with a small battery

operated lamp for use in narrow interiors

and places that are not exposed to light,

complete in case with fixed and flexible

extensions and mirrors.

ISSA 652707 - 482

Option.

Solid wooden box.

Dia

gn

ost

iceq

uip

men

t

Thermo-hygrometer Waterproof mV/pH/C meter PH meter kit

8

HERMetic UTI

Portable restricted electronic gauge

Ullage temperature Oil-water-interface level

Portable electronic gauging tapes MCC

The Portable Closed Flexi-Dip measuring

tape is a battery-operated electronic unit

that is totally gas-tight.

The tape is marked in metric or english units

and is antistatic coated (as is the sensor).

The model

DC-3A is designed in accordance

with the provisions of relevant

regulations of the International

Convention for the Preventing

of Pollution from Ships, 1973 and

the Protocol of 1978.

The waterproof Hanna pHep 3 provides

complete protection against accidental

immersion as well as allowing its use in

rough environments.

Range: -2.0 to 16.0

Resolution: 0.1 pH

Accuracy: +/- 0.1 pH

Calibration: Auto 2-point

PH meter pHep 3 Oil water interface detector model DC-3A

HI 8564 thermo-hygrometer provides

readings with 95% precision in

a very short time both for R.H. and

for temperature.

Range: 10.0 to 95% RH and

0.0 to 60.0 °C and Fahrenheit.

Resolution: 0.1% R.H. and 0.1°C.

Accuracy: 2% R.H. (10-95%) and 0.4 °C.

HI-9025C Microprocessor controlled

and fully waterproof.

Range: 0.00 to 14.00 pH

+/-399.9 ISE +/-1999

ORP 0.0 to 100 C.

Resolution: 0.01 pH 0.1

ISE 1 ORP 0.1 C.

Accuracy: +/-0.01pH +/-0.2

ISE +/-1 ORP +/-0.5C.

Loupe

Loupe glass

90 mm dial

ISSA 371027- 460

Hand anemometer

Handhold anemometer to measure

windspeed in four scales,

Beaufort, knots, m/s and km/h.

With provision to freeze the latest

measured indication in order

to easily read wind strength.

Range:

0-12 Beaufort, 0-120 km/h,

0-35 m/s 0-70 knots.

Dia

gn

ost

iceq

uip

men

t

9

Hand-tachometer Type Deumo

Digital tachometer Rotara

Measuring irrespective of direction

of rotating.

Range: 16-20.000 rpm s

Range optional: 50-50.000 rpm

subdivided into 3 individual ranges

490 DEUMO 20000 RPM

ISSA 651304 491

DEUMO 50000 RPM

ISSA 651305

Photo and Contact tachometer Uusing

adaptors or merely apply a reflective mar-

ker Each reading taken is automatically

held for 30 seconds. Carrying case and

reflective tape.

Ranges: Rotation 1-99.999 rpm. photo

Rotation 1-19.999 rpm. contact

485 Handtachometer

SIROX A32099

ISSA 651310

Coating thickness gauge Elcometer 345

Hexagonal wet film comb

1% Accuracy (1-3% over full range,

1% when calibrated close to reading

to be measured) 2 point calibration

gives increased precision.

Range: A range of probes allow

the 345 to have a range

of 0 - 13mm (0 - 500 mils).

Precision formed

in stainless steel

to be long-lasting

and reusable. Separate

metric and imperial

versions available.

Range of thicknesses

(30 teeth) on one

gauge of either 25

to 2000 microns.

Salinometer SL3005

Salinometer SL6000

SL3005 Salinometer for

continuous check on

the water passing from

condenser to freshwater

tank. Audio and visible alarm

when the salinity surpasses

a given value. Automatic

warning in case of internal

or external failure.

4-20 mA output as option.

SL6000 is the latest

salinometer for measuring

and supervising the salinity

of fresh water produced

by distillation of seawater.

Audio and visible alarm

when the salinity surpasses

a given value.

Automatic warning in case

of internal or external failure.

Vibration meter Model EMT220

Measurement scale:

Displacement:

0.001 - 1.999 mm

Velocity:

0.01 - 19.99 cm/s

Acceleration:

0.1 - 199.9 m/s2

Vibration acceleration:

< 199.9 m/s2

Ultrasonic Thickness Gauge Model: SA40

Measuring range:

0.8 to 225.0mm

Resolution:

0.01mm @ 0.8-99.99mm

0.1mm @ 100.0-225.0mm

Velocity range:

500-9999m/sec.

Dia

gn

ost

iceq

uip

men

t

10

Multiple echo ultrasonic QuaNix ®

The Only Fully Automatic Coating Thickness

Gauge With Radio Control Probe.

KEYLESS – No buttons – No Cables

– No Connectors

Miniaturized mobile probe for measuring

over all metals. Automatic Zeroing

Automatic probe recharge in the basic

gauge. No Calibration.

Digital Thickness Gauge

with Liquid. Crystal Backlit

Display. Measure metal

thickness to determine

wastage or corrosion –

accurately, Quickly and

without removing

surface coatings. next

For accurate temperature readings

with hot or cold solutions

directly from the scale. For all

ethylene glycol/antifreeze

agents. Suspended scale made

of plastic with automatic tempe-

rature adjustment.

The charged condition of the battery can

be tested using the battery acid tester.

Battery hydrometer complete with suction

hose and rubber handpump.

ISSA 792662 - 355

Battery acid tester Battery hydrometer

Anti-freeze tester Glycol tester

This paste is designed for use in fuel systems

415 ISSA 650890

Universal Indicator paper for

testing PH values by comparing

colours from the sample

scale and the results of the test.

Supplied in dispenser.

pH ranges: 1 – 11 and 1 – 14

Lion Alcolmeter S-D2

Accurate and reliable, enabling a complete breath test procedure

to be carried out on board. The Lion S-D2 uses an electro-

chemical fuel cell. Nobody beats the Lion.

Detector: Electrochemical fuel cell

Power supply: 9V battery with

sufficient power for at least 500 tests.

Features: Leather protective case

with 5 mouthpieces.

Option: Set of 250 mouthpieces

ISSA code 331221 ordering code 80100

Electronicleak detector The LS790a Leak-Seeker

Variable Sensitivity: The only portable

refrigerant leak detector with 10 different

sensitivity ranges for all refrigerants,

At the lowest sensitivity setting, the LS790a

can detect an HFC134a leak as small as 1/2oz.

(15grams) per year. At the highest sensitivity

setting, the unit can detect an HFC-134a

leak as small as 1/4oz. (10 grams) per year.

Modified water paste Kolor Kut

The Paste will successfully gauge for gasoline, crude oils,

kerosene, Jet Fuels, Naptha and

various other gas

oils and chemicals.

Gasoline finding pasteKolor Kut

PH test paper

Dia

gn

ost

iceq

uip

men

t

11

Oil mist monitor QMI

Avoid this

Use light scatter as the sensing method works from

a true zero and requires no calibration. A 500-m/sec.

response times simultaneously on all channels.

Variable settings

in mg/l to suit

all types of

engines and

locations. A self-

diagnostic fault

finding system.

Crankcase explosion resulted

from the self ignition of an oil

vapour from a hotspot, the

vapour itself being caused by

the progressive and excessive

increase in temperature of

an internal surface due to high

friction loads, due to incipient

seizure between surfaces.

12 points Multiplex Detector head

Checks up to 12

detection points

simultaneously

and continuously

Allows monitoring

at source.

The system works

from a true zero

and requires no

calibration.

Raising the alarm

within half a second!

These are mounted at each crank compartment,

gear or chain-case housing and thrust bearing,

housing if this has its own space.

The detector incorporates

LED optos and a PCB.

A microprocessor,

that is built into the unit,

sends five sets of infor-

mation to the monitor

each 0.5 seconds

via a cable connection.

1 point Uniplex monitor Atmospheric detector heads

The QMI Uniplex oil mist monitoring instrument meets

the needs of small engines and confined atmospheric

spaces with all the

benefits of having

the monitor located

in the control room.

Have all the salient

features of

the Multiplex unit.

include their own fan, this ensures correct airflow

and tamper-proof operation avoiding the need

to use pressure or air flow regulators. Concentrations

of oil mist may be

localised, but normally

it diffuses into the

surrounding area.

If thisconcentration of

mist spreads throughout

the machine room

space, a flash fire can

occur over a large area.

2 point Duoplex monitor

The Duoplex oil mist

monitoring instrument have

all the salient features

of the Multiplex unit.

The Duoplex has two

detectors opposed to

Uniplex that uses one.

Have all the salient

features of

the Multiplex unit.

Dia

gn

ost

iceq

uip

men

t

Fuel & lube check Portable analysis set

Insoluble check test kit

12

Viscosity check (falling ball)

Viscosity/density test

Features:

Measuring range: 10 - 4000 cSt

Measuring time: about 3 min

Accuracy: +/- 3%

Size: 50 mm by 140 mm

Weight: 210 grams

Benefits:

Read-out is viscosity in cSt. No consumable

parts. Easy to use for non trained

personnel. Handy and time proven.

Measuring range: water in oil 0-1,

2vol%H2O, alcalinity (BN) 0-60BN.

Measuring time about 15 min.

Accuracy: +/- 3%


Weight: 500 grams

Electronic lube oil test devices.

Benefits:

Two identical test procedures just one

reagent for each test. No dangerous goods.

Measuring range: 0 - 0,4 or

0 - 1,2 % H2O


Accuracy: +/- 3%


Weight: 550 grams

Direct read-out in vol.-% H2O

Just one reagent. Reagent is no dangerous

good. Easy to use for non trained personnel.

Bayonet catch for highest accuracy.

Applicable for all hydrocarbon fluids.

Water in oil measuring device Alcaliny twin test Electronic Water in Oil /BN test

Allows testing of major oil parameters

viscosity (incl. CCAI calculation)

density, water in oil, alcalinity

(BN), salt water contamination,

compatibility insolubles, pour

point. size: 300 x 470 x 310 mm

weight: 22 kg easy to use -

even for non trained personnel,

handy in size, for operation

and transport no dangerous

goods test desk included.

Uses the means of a vacuum filtration device

to extricate insolubles and impurities out of the oil

onto a molecular filter. With the help of a micro

magnifying lens it is

possible to determine

quantity, dimensions

and even the origin

of impurities! Abrasions

on pistons, pumps, etc.

maybe detected in time

to react results become

catastrophic.

Viscosity check (go/no go)

Viscosity of lubricating and hydraulic oils

should be checked frequently. Applicable

for all lubricating oils and viscous hydraulic

oils, no replacement

reagents, easy

to use for untrained

personnel, handy

and simple. Features

measuring range:

go/no go measuring

time: about 1 min.

Salt check (go/no go)

It is important to know the nature of water (fresh or saltwater)

found in lubricating or fuel oil - it might give some help in

identifying the source of the leakage. Easy to handle, Colour

change will provide

a definite answer

within just fife minutes.

Experiance with

this test device will also

allow you to roughly

determine the vol %

of salt contamination.

Measuring range:

Viscosity: 25 - 999 cSt at 50°C

Density: 820-1050 kg / m3

Required sample: approx 200ml


Accuracy: +/- 3%

Size: 160x260x240 mm

Weight: 15 kg

Benefits: No sample change for each

test. Same test temperature (50°C).

Re-calculating density to 15°C.

Dia

gn

ost

iceq

uip

men

t

13

Emulsion breaking bilge water cleaning systemMarinfloc EBBWCS

IMO Resolution MEPC

107 (49). Offers a process

which treats bilge water

far below the current IMO

requirements (<15ppm).

The Marinfloc EBBWCS

consistenly treats bilge

water 0 - 3 PPM of Oil in

the discharge water outlet.

Approved

Sludge dewatering unitMARINFLOC SDwU

Reduces your water in sludge

by up to 85 %. The SDwU

can either be used in fully auto-

matic or in a semiautomatic

mode. The only moving parts

in the unit are the feed pump

and dosage pump.

Neptumatic MOC MARINFLOC

The white box system

The compact,

high-capacity,

three (3)-stage

Sewage (Black)

and Waste

(Grey) water

treatment

system.

Is designed as a fail safe system for the discharge

of water overboard. Incorporating

the oily water separator’s

oil content meter and

the return of water funtions

in a locked cabinet.

This assurence the

operators thet water

whit an oil content

of >15 PPM cannot

accidentally be

pumped overboard.

PPM monitor Oil discharge monitor

Range 0 - 30 ppm, Accuracy

IMO MEPC 60 (33) (+/- 5 PPM).

Concentration Indication

2 x 7 segment LED.

Alarm Operating Points

1 - 15 ppm (adjustable).

Alarm 1 Operating Delay

0-20 sec (adjustable).

Alarm 2 Operating Delay

10-240 sec (adjustable) 15.

Ballast monitor OCD10M

Meet the strict requirements of the latest amendments to IMO

resolution A586(14) which restricts the amount of oil discharged

via the ballast system to 30 litres per nautical mile.

Only 2 bulkhead penetrations are required instead of the usual

3 enabling a cheaper

installation to be carried

out. Available options:

Up to 4 sample points,

Flowmeters, Stainless

Steel wetted parts for

Chemical tanker service.

Eng

ine

mo

nit

ori

ng

Pressure switchesDanfoss KPS series

Pressure switchesDanfoss CS

Have a three-pole switch and adjustable differential

14

Pressure switches AMOT 4140

Modular pressure sensors AMOT Model ‘A’ Series

Rugged, lightweight and compact Single

and multi-point pressure sensing Integral

isolation valve and test point (Manifold)

Pressure ranges:

0 – 70 BAR (1015 PSI) – 4-20mA

Available as Transmitter ranges:

0 – 34.5 BAR (500 PSI) – Switch

IP65 (with DIN connector)

Suitable for marine and

industrial environments.

An advanced, reliable, rugged range of

pressure switches. Single and dual

operation allowing alarm and shutdown

capabilities in one unit, or... Combined

Pressure and temperature switch

with independent fully adjustable set

points, vibration resistant up to 14G

at 100Hz. Pressure 0.28 to 40 bar

(4 to 580psi). Temperature 16°C to 250°C.

Heavy duty 15A switch contacts

Set point indicated on scale plate.

Explosion Proof BASEEFA Certified Single

or Dual Pressure, Single or Dual

Temperature, Snap Acting – Positive

Shut-off Provides snap switch action

at set points on: Engine Coolant Systems

Process Control Points Alarm Systems

Compressor Coolant Systems Lubrication

Systems Hazardous Area Applications.

Pressure ranges: -1 to 30 bar. Replaceable

contact system Also available with gold

plated contact systems, Fail-safe, Adjustable

differential, Enclosure IP66, Available

with min. and max. reset function (IP54).

Also available as differential switch.

Available with all relevant marine approvals.

Pressure switchesDanfoss RT

Consist of a variety of ordinary controls

including differential and neutral zone

Hazardadous area temperature and pressure switchesAMOT Mode 4250

Suitable for use in alarm and regulation

systems in factories, diesel plant,

compressors, powerstation and on board

ships. Pressure ranges: 0 to 60 bar.

Adjustable or fixed differential Robust

and compact construction Resistance

to shock and vibrations. Enclosure IP67.

Sturdy and sea water resistant.

Available with all relevant land and

marine approvals.

For automatic start and stop of air

compressors and water boosters

Pressure ranges: 2 to 20 bar Contact

system: 3-pole (standard) 1-pole

(accessory) Adjustable differential

Manual switch to lock the contact

system Enclosure IP43 or IP55.

Pressure switchesDanfoss KP

For regulating, monitoring and alarm systems

in industrial applications. Fitted with a single-

pole switch changeover, and can control

single-phase ac motors of up to 2 kW directly.

Pressure ranges: -0.2 to 14 bar High

contact load - Ultra short bounce-time,

Media: Gaseous media and air Enclosure

IP44 when mounted with top cover and

back plate Small dimensions - space saving

easy to install Shock and impact resistant

Pressure switches DanfossMBC

Used in marine applications where space and reliability are

important features.

Pressure ranges: -1 to 100 bar Low

differential (fixed) micro switch Resistant

to shock and vibrations Diaphragm

version for applications with pulsations/

pressure peaks, Compact design Low

installations costs Fast and easy to operate

Easy to mount on block tvailable

as differential pressure switch Available

with all relevant marine approvals.

Eng

ine

mo

nit

ori

ng

15

Metal-bellows pressure controller Trafag

Pressure switch Condor

Metal-bellows pressure controller with

fixed switching differential. Robust

aluminium housing. Repeatability ±1.0%

FS. Protection IP 65. Any mounting

position possible. Scale accuracy ±2% FS

Measuring range: -0.9...1.5 to 10...100bar

Repeatability: ± 1 % FS Hysteresis: < 10 %

FS Measurement unit: bar/MPa.

For automatic start and stop of air compressors.

Pressure ranges: 2 to 20 bar 3-pole Contact system

MDR2

pressure

switches MDR5 &

MDR6

pressure

MDR3 switches

pressure

switches.

Solid State pressure switch Herion Norgren Model 33D

Safety shutdown device AMOT 2800

Extremely Long Life - 100 Million

Cycle. Large 4-Digit LCD Display

with Backlight.

NO, NC or Window Mode Operation.

Single or Dual Independent Outputs

Optional 4-20 mA Analog Output

Versions with 100%

Stainless-Steel Wetted Parts

which senses oil pressure.

The device is typically connected

to a fuel pump and should

a loss or drop in oil pressure

occur below the setpoint,

the 2800 will trip immediately.

The 2800 mechanically linked

to a diesel engine fuel pump

will then activate shutdown.

Two way temperature sensing valveAMOT 2230

Two way temperature regulating valveAMOT 2470

With remote sensing to modulate or shut off flow

Typical Medium Sensed: Liquids. Adjustable

Temperature, through various ranges: Trip Level:

19°-129°C. Maximum Allowable Temperature

(Proof): 129°C (265°F). Valve Body: Brass. Valve

Well: Stainless Steel. Installation Threads: 1/2 in

NPT, BSPT. Port Threads: 1/4in NPT, BSPT,

Maximum Pressure at IN Port: 8.62 Bar. Sensor

Type: Wax. Override: None.

Housing: Cast Iron Seats and Sliding Valve:

Bronze Temperature element & extension:

Brass Adaptor Assembly: 316 Stainless Steel

Dynamic Seal: Ethylene

Propylene Rubber. Maximum

Pressure on Temperature

Element: 54 Bar Maximum

Shutoff Pressure: 8.62 Bar

(125 Psi) Maximum Pressure

on Well (if used): 340 Bar.

Three way temperature regulating valveAMOT B

Flow rate: 10 - 450 m3/Hr Aplication

Diverting or Mixing Body Materials

Aluminium, Bronze, Cast Iron, Ductile

Iron, Steel & Stainless Steel Valve

Sizes (nominal bore): 40, 50, 65, 80,

100, 125, 150 & 200mm (11/2” to 8”)

Port Connections Screwed 40 &

50mm (11/2” & 2”) BSP.PL or NPT.

Flanged 50 – 200mm (2” – 8”) to most

DIN, ANSI, JIS and other standards.

ValvesAMOT G

Flow to: 2000m3/hr Sizes: 50mm (2”) to

400mm (16”) The complete temperature

control valve system. Systems can be

configured to suit applications from pneu-

matics to PLC control with communications.

AMOT 8071

Compact rugged PID controller for use

with the Amot electrically actuated model

GE control valve.

Eng

ine

mo

nit

ori

ng

Temperature switchesDanfoss KP series

Temperature switchesDanfoss MBC 8100

16

Pressure switches AMOT 4140

Temperature switchesDanfoss RT

Consist of a variety of ordinary room

and remote sensor temperature swit-

ches including neutral zone tempera-

ture switches. Temperature ranges: -

60°C to 300°C Replaceable contact

system, Fail-safe Adjustable differen-

tial Enclosure IP66 Available with min.

and max. reset function (IP54)

Available with dead zone Available

with all relevant marine approvals.

An advanced, reliable, rugged range of

pressure switches Single and dual operation

allowing alarm and shutdown capabilities

in one unit, or ... Combined Pressure and

temperature switch with independent

fully adjustable set points, vibration resistant

up to 14G at 100Hz Pressure 0.28 to 40 bar

Temperature 16°C to 250°C Heavy duty

15A switch contacts Set point indicated on

scale plate.

A robust, compact construction

and resistance to shock and vibra-

tion. Temperature ranges: -20° C to

200°C Gold plated contact

systems. Adjustable or fixed diffe-

rential. Robust and compact con-

struction Resistance to shock and

Temperature ranges: -20° C to

200°C through various ranges:

–10- 30°C

20- 60°C

50-100°C

70-120°C

60-150°C

100-200°C

Temperature switchesDanfoss KPS

Temperature switchesDanfoss KPS

Fitted with a single-pole switch

(SPDT), and can control single-phase

ac motors of up to 2 kW directly.

Temperature ranges: 0° C to 150° C

High contact load - Ultra short bounce-

time Enclosure IP44 when mounted

with top cover and back plate Small

dimensions - space saving - easy

to install Shock and impact resistant.

Used in marine applications. MBCs are compact, have high

vibration resistance and feature all commonly marine

approvals. The fixed, but low

differential guarantees accurate

monitoring of critical tempe-

ratures. Block design.

Fully electromechanical

-10 to +200 °C tempe-

rature range. Available with

all relevant marine approvals

Designed to meet the strict

demands in the marine equipment.

Thermostat 471/472 Navistat Trafag for marine applications

Compact design. Rugged housing.

High repeatability Protection IP65.

Any mounting position.

Range:

+20 ... 110 [°C]

+20 ... 150 [°C]

+40 ... 300 [°C]

Thermostat 471/472 Navistat Trafag for marine applications

Compact design. Rugged housing.

High repeatability Protection IP65.

Any mounting position.

Range:

+20 ... 110 [°C]

+20 ... 150 [°C]

+40 ... 300 [°C]

Protection tube:

65 [mm]

90 [mm]

110 [mm]

150 [mm]

KPS with remote

sensor and armoured

capillary tube

KPS with fixed sensor

and pocket

Capillair

lengte:

L=1000

L=2000

L=3000

Inst

rum

entv

alve

s

17

Pressure gauge cocks Pressure gauge cocks

Pressure gauge cocks are

intended to isolate the pressure

gauge from the pressure medium

in order to enable inspection

or replacement of the gauge

and also to extend the service live

of the pressure gauge where the

pressure is continually pulsating.

Available in brass, steel

and stainless steel

Pressure gauge valves Pressure gauge valves

To isolate the pressure

gauge from the pressure-

mediumor to throttle and

to damp pressurepulses.

Valves with test connection

enable simultaneous

connection of a test gauge

to check the pressure

in the pipe.

Adaptor with test connection Surface mounting bracket Are intended to provide a means of

surface mounting where the

thermometer or the pressure gauge

Pressure gauge snubber

To suppress the effect of pressure

pulses and pressure peaks.

Overpressure Protectors, adjustable.

Pressure Gauge Syphons

To protect the pressure

gauge from the effect of hot

pressure media such as steam

and also to reduce the effect

of rapid pressure surges.

Manifolds Combinations

To enable simultaneous

connection of a test gauge

or test equipment to test

performance of the pressure

gauge in service.

Consists of a steel

valve with test

connector and fastener.

Available in

brass, steel and

stainless steel

Inst

rum

entv

alve

s

3/4WW special ISSA 7526 B&W M/E - 50209

Angle Valves

18

Spring loaded indicator valve Connection types

Engine side:

3/4” Withworth

1/2” BSP

Metric M20x1, M20x1.5, M20x2, M20x2.5

1/2 NPT

3/4” BSP male, turnable.

Valves with special connections at engine side or

indicator side on request.

Indicator side:

W 27 x 1/10” female cone or

1-3/16” - 1/10 male cone

45° angle

extended spindle

Straight3/4WWdop

For turbocharger cleaning equipment.

Used to clean the turbine blades of

turbo-chargers.

Extentionpiece Cock kit

A service set to reconditioning

and repair of worn indicator

valves, including:

- Cone milling cutter

- Stop valve

- Valve cone nut

- Screw nut W27*1/10”.

Spindle cone privents

any unwanted

opening of

the valve, even

by unfavorable

vibrations frequencies.

Therfore a counter

nut on the spindle

is not necessary.

ISSA 7526

B&W A/E - 50205

ISSA 7526

URAGA - 50405 Straight type

90° angle type

Special 90° angle

B&W type

45° angle type

90° (angle)

extention piece

straight

extention piece

Gas

det

ecti

on

19

Multigas monitor Tetra

Multigas detector SOLARIS FIRE

For the detection of flammable

gases, oxygen and toxic gases.

Robustness and real value for money.

Intrinsically safe, with embedded

software Up to four gases measured

Loud 90dBA audible alarm, visual

alarm and vibrating alarm as

standard Rugged and robust, IP65

ingress protection Simultaneous 4

gas display with automatic backlight.

Portable instrument for detecting of O2, H2S, CO and combustible

gas. dimensions of 41/2”H x 21/2”W x 11/4”D.

Features:

- Rugged construction

- Ultimate flexibility

- World-class alarm system

- Versatile display

- Simple calibration

- Long-life battery

- TIM® System compatibility

Personal monitors Gasman II

The Gas-tester II H

Versions availableFor oxygen, toxic

and flammable gasOne year dry

cell life for toxic and oxygen models.

Highly visible and audible alarms

Confidence ‘blip’ Rugged casing

Water and dust resistant to IP66 stan-

dard. Optional rubber boot available

for particularly harsh environments.

Comprehensive PC interface.

With incorporated stroke counter

- is a manually and intermittently -

operated detector tube pump

which together with detector tubes

is used to monitor the ambient

air or the air in confined spaces for

hazardous gases.

Fixed gas detectors Calibration check gas

Flammable, toxic gas and oxygen detectors offer:

Fixed Gas Detector product range consists of:

Flamgard: Flammable Gas Detectors

Cirrus: Infrared Flammable Gas and

CO2 Detectors

TXgard: Toxic Gas & Oxygen

Detectors

TCgard: Thermal Conductivity

Gas Detector

Nimbus: Infared Flammable

Gas Detector

Flamsafe: Safe Area Flam.

Used with the appropriate calibration

check gas, offers a quick, convenient

and economical method of checking

the response of gas detection

instruments. Regulating valve, controls

the flow and includes a gauge

to measure pressure of the calibration

gas cylinder.

Optional:

Aerosol-type Calibration Check Kit.

Oxygen analyser Xendos 1800 Marine

Inert gas monitoring solutions for tankers

- Stand-alone unit complete with wet gas sampling system

- Designed for safe area oxygen analysis

- Low maintenance and re-calibration requirements

- Range of alarm outputs

to aid integration with

other systems

- Easy to set up and

to operate

- Fast response

- Weatherproof enclosure

Sevomex portable oxygen analyser Model 262A

The Servomex 262A is an reliable and accurate

portable oxygen analyser which is suitable for use

primarily in the marine industry.

Its intrinsically safe design.

The intrinsically safe Servomex

262 portable oxygen

analyser utilises Servomex’s

renowned paramagnetic

cell, which unlike some

other measuring.

- Optional

sampling

pump

- Outstanding

2-year

warranty

Gas

det

ecti

on

Gas Detector Model GP-204

Oxygen analyserModel OX-62B

20

Multigas detector Orion™

Singlegas detector Titan

Single gas combustible instrument for detection

of flammable gases or vapors. The two very

bright alarm LEDs are visible from all sides.

The intuitive one button operation allows

no false operation.

- Easy to use

- Big display with big characters

- Small size and weight

- Exchangeable battery packs in hazardous

areas (alkaline and NiMH)

- NiMH optional with vibration alarm available

Combustible Sensor % LEL

Oxygen Sensor Oxygen (0–25%)

Carbon Monoxide (0–999 ppm)

Hydrogen Sulfide (0–200 ppm)

Battery Pack Replaceable alkaline option

rechargeable NiMH battery with Vehicular

charger. Sampling Methods Integral,

Pulsecheck pump Manual aspirator modu-

le. Sampling Lines 3-foot coiled 5-foot coi-

led 10-foot 15-foot 25-foot available.

For detecting low levels of oxygen

in confined spaces or in any location

suspected of oxygen deficiency

or enrichment, the units are

for immediate assessment.

The MiniOX® Responder Alarm

has an intenal sensor; the MiniOX

Remote esponder Alarm has

an external sensor attached to a 10-foot

cable. The range is 0-100% O2.

Application:

Personal protection

Feature:

Simultaneous detection of 4 gases

LEL, O2, H2S & CO. Smallest 4 gas

monitor in the market. Vibration

alarm. Alarm trend data.

Rechargeable Ni-Cad battery.

Continuously operates for up to 10

hours. Intrinsically safe design

Personal multi-gas monitor GX-2001

Remote responder alarms MiniOX® and MiniOX®

Robust design Simple design

with small size & light weight.

Large size analog meter

3 kind of gas range

scale Detection principle

Catalytic combustion.

Combustible gas (LPG, Gasoline & LEL

scale) in air Methane (CH4) as option.

Remote type oxygen monitoring

Large size meter with illuminous

paint Stock-proof protective cover

at sensor part Long life sensor

applied Intrinsically safe in Japan

Detection principle:

Electrochemical cell

Measurable gas:

Oxygen in air

Measuring range:

0-25%

Multi-gas monitorsThermo GasTech Innova

Can be configured to monitor up to four gases in several

combinations, including the detection

of hydrocarbons in the % Vol, LEL

or ppm range, oxygen content,

and a choice of one or two toxics:

Sensors:

- Combustibles: Catalytic compensated

- Cl2, CO, HCN, H2S, NH3, NO,

NO2, O2, PH3, SO2: Electrochemical

- Methane

- Internal Sample-draw pump

Portable multigas monitorsImpact Flammable gas

The Impact range are able to monitor and display up to four

gases simultaneously including flammable and oxygen gases

as well as up to two further toxic gases.

Flammable gas: 0-100%LEL, Oxygen: 0-25%,

Carbon monoxide: 0-500ppm, Hydrogen

sulfide: 0-50ppm,

Sulfur dioxide: 0-20ppm,

Chlorine: 0-10ppm,Chlorine

dioxide: 0-5ppm, Nitrogen-

dioxide: 0-20ppm,Ammonia:

0-100ppm, Carbon dioxide: 0-3%.

Flo

w&

leve

l

21

Oil flow meters

Oil flow meters Tokico

Direct reading With reset counter

Accuracy 0.5%

Flow range See tabel

Max. working pressure 10 bar.

Hydraulic test

pressure 20 bar.

Max. working temp. 100 °Celsius

Material body Cast iron (FC25)

Material rotor FGB type: Resin

FRO type: Aluminium alloy

casting

Flow direction Right Left

Watermeter flow meter FuelCom system

For horizontal

mounting, available

in all sizes. Working

pressure: PN 16 bar. Max

temperature: 50° C Option:

for hot water

90° C) Moun-

ting: Horizontal

(Option: vertical mounting)

Provides accurate fuel measurement for

diesel engines. Simultaneous multi-engine

metering capabilities, Datalogging

capabilities Simple plug-and-play operation

LCD display, User programmable.

Highest accuracy Temperature compensated

to 60° F (15° C) Fail-safe (no fuel) starvation

design Easy maintenance in the field Field

proven reliability.

SIKA flow sensorsseries VR

- for pipelines

- Measuring range from 0.3 l/ min. to 1000 l/min.

- Can be used for temperatures

of up to 120 °C and

pressures of up to 100 bar

- Viscosity-stable for liquids

up to 10 cSt. Materials:

- POM (Hostaform)

- Stainless steel

Digital Flow Rate Indicator SIKA TD12500

The TD 12 500 can be used

as an extremely compact

“local flow display” in connection

with a SIKA flow sensor in the

TURBOTRON series. The electrical

connections are limited to the power supply.

Max. pressure 16 bar.

Max. temperature 130° Celsius.

Accuracy 1% over total range.

The meter can be mounted in a horizontal or a vertical pipe. If there is a possibility of foreign matter

being present in the liquid (which might affect the accuracy and life of the meter) a filter should be

incorporated on the inlet side.

FGB type flow range flow range max. bore Ø flens L size light oil heavey oil intermittent

15 95 130 10-200 5-200 20 100 170 40-1250 20-1250 25 125 200 150-3000 50-3000 FRO type 40 140 200 800-4500 10-6000 7000 50 155 250 1500-9000 250-13000 15000 80 185 300 3500-25000 600-35000 40000

type flow max flow conn. coupling Qn 1.5 m3 3m3 1/2" BSP

Qn 2.5 m3 5m3 3/4" BSP Qn 3.5 m3 7m3 1/1" BSP Qn 6 m3

10m3 1 1/4" BSP

- PVDF

- Brass

Type VZO 15 20 25 40 50

normal flow rate 400 1000 2000 6000 20000 l/h.

length without coupling (a) 165 165 190 300 350 mm.

male thread on body (c) 3/4” 1” 1 1/4” 2” 2 1/2” BSP

threads on couplings 1/2” 3/4” 1” 1 1/2” 2” BSP

Type 1 Type 2

Type 3 Type 3c

Type 4 Type 5

Type 6 Type 8

Pre

ssu

re

22

Pre

ssu

re

23

Airline filter Lubricator

711 Airline filter 1/4”BSP AF2000

ISSA 590801


ISSA 590802


ISSA 590803


ISSA 590804

731 Lubricator 1/4”BSP AL2000

ISSA 590811


ISSA 590812


ISSA 590813


ISSA 590817

Regulator Injection nozzle tester

721 Regulator 1/4”BSP AR2000

ISSA 590821

751 3/8”BSP AR3000

ISSA 590822


ISSA 590823


ISSA 590824

Type EFEP 60 H, 0-400 bar & psi.

Type EFEP 67 D, 0-600 bar & psi.

- Injection pump with hand lever.

- Acrylic transparent fuel container

with filter.

- Shut off valve

- Pressure gauge light and heavy Duty.

- High pressure pipes for connection

injectors.

- Accessories: High pressure pipes

Pressure test system TP1

Digital pressure gaugeLEO 2 highly accurate

Accuracy: 0,1 % FS typ. 0,2 % FS max.

Compensated. Temperature

Range 0…50 °C. Supply 3 V battery.

Battery Life 1’000 hours continuous

operation. Pressure Connection

adapter G 1/4”. Protection, CEI 529 IP 65.

Diameter x Height x Depth

59 x 95 x 32 mm.

U-tube sg. 1.0 J-tube sg. 13.6

range bar length mm. 0-0,3 297 0-0,4 375 0-0,5 4470-0,6 525 0-0,7 597 0-0,8 675 0-0,9 747 0-1,0 8250-1,1 8970-1,2 975 0-1,3 1047 0-1,4 1125 0-1,5 1197 0-1,6 1275

-1 to 40 bar,

-14.5 to 580 psi

Used for calibration checks on

pressure transmitters, pressure

switches, indicators, recorders and

controllers. Adjustable stroke to

provide over pressure protection.

range mbar scale mbar length mm. 0-10 10-0- 10 1720-15 15-0- 15 223 0-20 20-0- 20 2740-25 25-0- 25 3250-30 30-0- 30 3760-40 40-0- 40 4780-50 50-0- 50 5800-60 60-0- 60 6820-70 70-0- 70 7840-80 80-0- 80 886 0-90 90-0- 90 988

0-100 100-0-100 10900-110 110-0-110 1192

Pre

ssu

re

Model 213.53 Model 612.20 (industrial Series)

24

Model 111.10Black finish steel Case

Model 233.50 (liquid filling)

Stainless Steel Case and

Bourdon tube. All Stainless steel.

Nominal size 63,100, 160 [mm].

Accuracy class 1.0 1.6 (63 mm).

Bottom or back Connection 63 mm

G 1/4 BSP 100, 160 mm G 1/2 BSP.

Nominal size 40,50,63,80,100 [mm].

Accuracy class 1.6/2.5.

Bottom Connection only 40 mm G 1/8

BSP 50, 63 mm G 1/4 BSP 80,100,160

mm G 1/2 BSP

Model 111.12 Back

Connection

Stainless Steel Case.

Nominal size 100, 160 [mm].

Accuracy class 1.0.

Brass Bourdon tube.

Bottom or back Connection G 1/2 BSP.

Test Gauge Class 0.6 (± 0.5 %).


Nominal size 160 [mm].

Accuracy class 0.6.

Brass Bourdon tube.

Bottom or back Connection G 1/2 BSP.

Model 312.20 Model 212.20

Stainless Steel Case. Liquid Filling.

Nominal size 63,80,100 [mm].

Brass Bourdon tube.


Bottom or back Connection.

50,63 mm G 1/4 BSP.

80, 100 mm G 1/2 BSP.


Nominal size 100, 160 [mm].

Scale ranges per:

0 ... 10 to 0 ... 600 mbar (100 mm)

0 ... 6 to 0 ... 600 mbar (160 mm).

Bottom or back Connection 63 mm

G 1/4 BSP 100, 160 mm G 1/2 BSP.

Model 232.50

Stainless Steel Case and Bourdon

tube. All Stainless Steel.

Nominal size 63,100, 160 [mm].


Bottom or back Connection 63 mm.

G 1/4 BSP 100, 160 mm G 1/2 BSP.

Model 614.11

Square and Edgewise Panel.

Mounting Series.

Nominal size 72 X 72, 96 x 96,

144 x 144, 144 x 72 [mm].

Accuracy class 1.6 Model

614.11. Back Connection

only G 1/4 BSP, G1/2 BSP.

Tem

per

atu

re

25

SIKA type 271 Accuracy

Large sized straight model casing

200x36 mm.

Ranges:

-120+40°C

-60+40°C

-30+50°C

SIKA type 291

Medium sized straight model casing

150x36 mm.

About 1 % of maximum scale

value. The accuracy of thermometers

with an alcoholic fluid meets DIN 16

195 requirements and consequently,

corresponds with the requirements

for local reading thermometers.

SIKA type 174

Small sized straight model casing

110x30 mm.

SIKA type angular 135 degrees

Angular type with an angle of 135 degrees,

the last one of the first three numerals

changes as follows.

271... becomes 273...

291... becomes 293...

174... becomes 176...

SIKA type angular 90 degrees

Angular type with an angle of

90 degrees, the last one of the first

three numerals changes as follows.

271... becomes 272...

291... becomes 292...

174... becomes 175...

Tread connections

G 3/8"A

G 1/2” A

G 3/4"A

0+60°C

0+100°C

0+120°C

0+160°C

0+200°C

M16x1,5

M20x1,5

M27x2

Order Example

271 2 64 1 1 063 2 1 Thermometer execution type

straigth 271-291-174 angle 90° 272-292-175

angle 135° 273-293-176 Immersion tube type A = 1 (standard)

B = 2Ranges -120+40°C = 124

-60+40°C = 64 -30+50°C = 35

0+60°C = 06 0+100°C = 10 0+120°C = 12 0+160°C = 16 0+200°C = 20

Division Celsius (°C) 1Celsius + Fahrenheit (°C + °F) 2Columns (Filling) Blue is standard Fû = 1 Immersion tube lengths l1 in mm 63 = 063 (immersion tube “B” 100 = 100 incl. thread connection; 160 = 160 for type “A” measured from 250 = 250 lower edge of adapter) 400 = 400 Tread connections G 3/8”A = 1

G 1/2”A = 2 G 3/4”A = 3

M16x1,5 = 5 M20x1,5 =7

M27x2 = 9 Immersion tube materials Brass = 1

Steel = 2 Stainless Steel 1.4571 = 3

Special brass (hex.nut SoMs 59/tube SoMs 76) = 4

SIKA type 271 Large sized straight casing 200x36 mm.

SIKA type 291 Medium sized straight casing 150x36

mm.

SIKA type 174 Small sized straight casing 110x30 mm.

Glass Inserts (Capillaries) Capillary tube of solid glass, prismatic

(optic enlargement of the column), oval

opening, and white background for

blue fluid column. Calibration is deeply

burnt, in black, thus being absolutely

resistant. The main graduations, which

correspond with the printing on the

casing, are especially clearly outlined.

Tem

per

atu

re

MH 3310 General purpose sensor

Fast response sensor

Surface sensor

Spike sensor

Gas temperature sensor

26

SIKA-Microtemp TT 7100 SIKA-Microtemp TT 7110

Is a precision thermometer

using NiCr-Ni temperature

detector type K and covers,

depending on the exact type of

sensor, a temperature range

from -40

up to 1200°C

Is a precision thermometer

makes use of a Pt 100 sensor

with a three wire input.

It covers the range

from -100 °C

to 750 °C.

Is supplied with the semicon-

ductor sensor. The TT 7170 is

advantageous priced. Robust

aluminium anodised case

Temperature range -50 bis 1500C

Resolution 0,1 C Hold facility

semiconductor sensor

permanently

attached.

Offers features as Laboratory class

equipment. In temperature mode

the tinydevice can measure with

a resolution of 0,01 OC and an

accuracy of ± 0,030C. In standard

signal mode pressure (shown in

bar, mbar o psi), humidity

(shown in % RH) and

current (shown in mA)

can all be measured.

Microtemp TT 7200 Microtemp TT 7170

Air humidity: capacitive sensor. Temperature: Pt 1000 / 2 wire

MH 175 Measurement inputs: (mini-DIN socket)

1 x Pt 1000 / 2 wire

MH 1150 Measurement inputs: (mini-TC socket)

1 x Type K (NiCr-Ni)

MH 3155 Iinputs: (mini-DIN socket)

2 x exchangeable pressure sensor MSD

Contact thermometers Fluke 50 Series

Fast response and laboratory accuracy

(0.05% + 0.3°C) in a rugged, handheld

test tool. Relative time clock on MIN,

MAX, and AVG Electronic Offset function

allows compensation of thermocouple

errors to maximize overall accuracy

Measures J, K, T, and E-types of thermo-

couples Readout in ºC, ºF, or Kelvin (K)

Digital thermometer K-type

A large LCD display (18.5 mm),

reading hold function, °Celsius

or Fahrenheit display and

maximum record are some of

the features. Measurement

Range -50 ... +1300 °C and

-58 ... +1999 °F.

Tem

per

atu

re

27

Gas-in-Metal thermometer Process industry series

Sensor Element: Inert gas-in-metal expansion system non-toxic

Nominal Size: 100, 160 mm.

Design: Stem, with threaded connection

Accuracy Class (DIN 16 203): 1

Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C

Case: Stainless steel

Pressure Rating on stem: max. 25 bar (static pressure)

Wetted Parts: Stainless steel

Connection: Lower or back connection G 1/2 A Design per DIN for thermowell

Order Options: Connection and thermowells to customer specifications Other connectionsLiquid

filling (case) Alarm contacts Combi-Thermometer: lower connection with Pt 100, 3- lead (DIN IEC 751).

Gas-in-Metal thermometer Distant reading process industry series, with capillary

Sensor Element: Inert gas expansion system, non-toxic Nominal Size: 100, 160 mm. Mounting Provisions: 3-hole surface mounting flange (code H), stainless steel Surface mounting bracket (code M), die cast aluminum3-hole panel mounting flange (code V), stainless steel Triangular bezel with clamp (D), stainless steel Accuracy Class (DIN 16 203): 1Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C Case: Stainless steel Pressure Rating on stem: max. 25 bar (static pressure) Capillary: Stainless steel, Ø 2 mm Wetted Parts: Stainless steel Connection: Plain, with or without threads Design per DIN for thermowells per DIN Order Options: Design and thermowells to customer specifications Other connections Liquid filling (case)Alarm contacts

Gas-in-Metal thermometer Process Industry Series, with adjustable stem and dial

Sensor Element: Inert gas-in-metal expansion system, non-toxic

Nominal Size: 100, 160 mm.

Design: Case rotatable on stem 360°, stem adjustable all angle

Accuracy Class (DIN 16 203): 1

Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C

Case: Stainless steel

Pressure Rating on stem: max. 25 bar (static pressure)

Wetted Parts: Stainless steel

Connection: Plain, with or without threadsDesign per DIN for thermowells per DIN

Order Options: Connection and thermowell to customer specifications Other connections,

Liquid filling (case) Alarm contacts

Ranges

Options:

Different panel mounting options. Surface-mounted contact bulb. Liquid filling (case). Alarm contacts.

Connection s and thermowell to customer specifications. With Pt 100, 3- lead (DIN IEC 751) °C & °F or °Fahrenheit Scale.

Back

Connection

Bendable stem

360° or 180°

Straight Lower

connection

Range in

°C and °F

Liquid filling

(case)

-10 ...+110 °C

-10 ...+150 °C

0 ...+25 °C

0 ...+40 °C

0 ...+60 °C

0 ...+80 °C

0 ...+100 °C

0 ...+120 °C

0 ...+160 °C

0 ...+200 °C

0 ...+250 °C

0 ...+300 °C

0 ...+400 °C

0 ...+500 °C

0 ...+600 °C

0 ...+700 °C

0 ...+800 °C

-20 ...+40 °C

-20 ...+60 °C

-20 ...+80 °C

-20 ...+100 °C

-20 ...+120 °C

-20 ...+180 °C

-15 ...+45 °C

-10 ...+15 °C

-10 ...+30 °C

-10 ...+50 °C

-200 ...+50 °C

-120 ...+40 °C

-110 ...+50 °C

-100 ...+100 °C

-100 ...+50 °C

-80 ...+40 °C

-60 ...+40 °C

-60 ...+60 °C

-50 ...+50 °C

-40 ...+20 °C

-40 ...+40 °C

-40 ...+60 °C

-40 ...+80 °C

-40 ...+110 °C

-40 ...+120 °C

-40 ...+160 °C

-30 ...+30 °C

-30 ...+50 °C

-30 ...+70 °C

-30 ...+170 °C

Tem

per

atu

re

28

Type Bcoupling nut

Type CFixed connection

Type A04turning nipple

Straight Type TSR - Awith black painted steel case

Straight Type TXR - Astainless steel case

Angle Type TSR - Ewith black painted steel case

Type B01coupling nut

+ double nipple

Type B02with pocket

Type CS3adjustable

connection

sliding on stem

Backflange Type TXC - Bwith stainless steel case

Backflange Type TSC - Bwith black painted steel case

Type Bcoupling nut

Type A04turning nipple

Type B01coupling nut +

double nipple

Frontflange Type TXC - G, with stainless steel case

Frontflange Type TSC - G,with black painted steel case

Panel mounting narrowrim bezel with clamp

TypeTXC - H,with stainless steel case

Type TSC - Hwith black painted steel case

Type B02with pocket

Type CS2sliding on capillary

Type CS3adjustable

connection

sliding on stem

Angle Type TXR - Ewith stainless steel case

+K=180 or +K=360Bendable 360_ or 180_

Tem

per

atu

re

29

Cabin thermometer Bridge thermometer

Dail thermometer for wall

mounting, 100 mm. dial metal

case, range -10/+50° Celsius

Enamelled based thermometer

for in- or outdoor use

range -25/+50 °Celsius.

Cabin thermometer Minimum-maximum thermometer

Thermometer for wall mounting,

range -30/+50° Celsius & °Fahrenheit on

wooden, plastic or enamelled base.

ISSA 651701- 134

U-shaped thermometer,

range -30/+50° Celsius to register the

highest and lowest temperature.

ISSA 651706 - 136

Refrigerator thermometer Sauna thermohygrometer

Plastic thermometer for use in

refrigerators or freezing rooms,

range -30/+30 °Celsius.

Metal cased dial thermometer

for wall mounting and

measuring sauna temperature

and humidity, range +30/+120° C

and 0-60% relative humidity.

Sling psychrometer

Whirling psychrometer with wet and

dry bulb precision thermometers

in plastic casing for measuring air

temperature and humidity with

tabel, range -10/50° Celsius div. 0,5° C.

with side rule. (optional °Fahrenheit)

ISSA 370261 - 470

Dial thermometer - hygrometer

Hair hygrometer with

thermometer, for wall

mounting range 10-40°

Celsius and 30-100%

relative humidity. Colour:

White Diameter: 100mm

Robust case 204

ISSA 370256

Tem

per

atu

re

Thermometer Nurnberg stainless steel

Thermometer Copper cased

30

Meat roasting thermometer Pulp thermometer

Bimetal dial type meat thermometer

with spikeend stainless steel stem

120 mm or 400 mm., for the internal

temperature of (frozen) food, meat

and fish range -40°/ +40° Celsius or

0-120° Celsius, divided 1.0° Celsius.

With spike-end stainless steel

stem 120 mm., for the internal

temperature during roasting

or cooking meat, Material:

Stainless Steel The display

shows chicken, pork, lamb and

beef rare, medium and well

done. Range +60/+90° Celsius.

Material: Stainless Steel

This traditional dial thermometer

has an easily readable scale.

With integral hook and stand.

Pocket thermometer Pencil thermometer for general use,

150 mm. in nickel plated casing with

clip, ranges -30°/+50° C, 0-100° C,

-10/+20° Celsius for fruit with point

ISSA 651732 - 188

Digital pocket thermometer for general

use range -20°+150° Celsius, with hold

function. Resolution 0,1° C

Dial pocket thermometer24 mm Ø, with stainless steel

stem 80 mm., for general use.

Digital -20/150 C ISSA 651722 - 184

Dial -40/+40C ISSA 651735 - 181

Dial 0-120 C ISSA 651736 - 190

Digital and dial pocket thermometer Oven thermometer

Thermometer in stainless steel casing with

suspension ring and sampler for measuring tank,

hold and seawater temperature, range -10/+100

or -30/+50° Celsius & °Fahrenheit.

Option:

refill

Thermometer in copper case with sampler

for measuring tank, hold and seawater

temperature, range -10/+110 or -30/+50° Celsius

& °Fahrenheit. range -40/+60 C/F

ISSA 651710 - 124

Cargo-hold thermometer

Thermometer in wooden case with

rubber protection rings against shocks

and suspension ring, for measuring,

hold temperature, range -10/+100 or

-30/+50° Celsius or °Fahrenheit.

Test-pencil thermometer

Thermometer in brass case 300x12 mm. with

suspension ring, for general use, all ranges from

-50/+50° C up to 0-600° Celsius or °Fahrenheit.

range 50/+50 C: ISSA 651715 - 974

range -20/110C: ISSA 651725 - 962

range -20/110Cred: ISSA 651727 - 144

range 0-240 F: ISSA 651728 - 150

range 0-500 C: ISSA 651730 - 148

Tem

per

atu

re

31

Tank thermometer Tank thermometer

In brass case with suspension ring,

range -30/+100 or -30/+50° Celsius & °Fahrenheit.

Brass case ISSA 651742

Stainless steel casing

Options:

Test certificate.

InStainless steel case with suspension ring,


Options:

Test ertificate.

Thermometer Bridge

Freezing room thermometer

Brass chromium plated case.

Range -30/+50 °Celsius & °Fahrenheit

length 300 mm.

Thermometer in wooden case for measuring,

refrigerator and freezing room temperature,

range -30/+50° Celsius & °Fahrenheit.

Thermometer Cargo-Hold

Thermometer Refill

Thermometer in brass case with suspension ring,

for measuring, hold and air temperature,


Glas thermometer 270x16 mm, for tank-freezing-

cargo and bridge thermometer, ranges -30/+100

or -30/+50° Celsius & °Fahrenheit.

Thermometer Nurnberg Stainless Steel

Thermometer in stainless steel casing

with suspension ring and sampler for

measuring tank, hold and seawater tem-

perature, range -10/+100 or -30/+50°

Celsius & °Fahrenheit.

Option:

refill

Tank thermometer chain

Chain, steel

or Stainless Steel

Tem

per

atu

re

Meat roasting thermometer Pulp thermometer

32

Diesel exhaust gas thermometer RX3100 vertical stem

RX3101 horizontal stem

Diesel exhaust gas thermometer RX3080 vertical stem

RX3081 horizontal stem

Pyrometer, silicone oil filled, Ø. 100 mm.

specially adapted to measuring of diesel

engine exhaust gas temperature. Stabilized

against vibrations with silicone oil filled

case. Fully dust-proof and watertight Range.

+50/+650 °Celsius or dual scale all stem

lengths and connections available.

Pyrometer, silicone oil filled, Ø. 130 mm.

specially adapted to measuring of diesel

engine exhaust gas temperature. Stabilized

against vibrations with silicone oil filled case.

Fully dust-proof and watertight Range.

+50/+650 °Celsius or dual scale all stem

lengths and connections available

Same as RX3080 with backflange

for wall mounting

and with 3 or

5 mtr capillary tubing

stemlengt adjustable and all type

connections available.

Dial type immersion thermometers for temperature

measuring in oil, water and air systems for safe

operation and optimal efficiency.

Case: Zinc-coated metal, Nickel-coated bezel,

Immersion parts of brass.

Dial: 66 mm. and 80 mm.

Ø. Range 0-120 °Celsius.

Stem: Horizontal or vertical,

length from 40 mm.

up to 160 mm.

Connection: 1/2” BSP.

Thermometers Bimetal marine

Diesel exhaust gas thermometer RX3085

With spike-end stainless steel stem

120 mm., for the internal temperature

during roasting or cooking meat,

Material: Stainless Steel.

The display shows chicken, pork,

lamb and beef rare, medium and well

done. Range +60/+90° Celsius.

Bimetal dial type meat

thermometer with spikeend

stainless steel stem 120 mm or 400 mm.,

for the internal temperature of (frozen)

food, meat and fish range -40°/+40° Celsius

or 0-120° Celsius, divided 1.0° Celsius.

Pulp thermometer

Bimetal dial type meat thermometer

with spikeend stainless steel stem

120 mm or 400 mm., for the internal

temperature of (frozen) food, meat

and fish range -40°/+40° Celsius or

0-120° Celsius, divided 1.0° Celsius.

Oven thermometer Dial

Material: Stainless Steel.

This traditional dial thermometer

has an easily readable scale.

With integral hook and stand.

Var

iou

s

33

Deflection indicator DI-4

The ovality kit

Micro-processor controlled.

Measurement reports can be

down loaded to pc. Large

measurement distance (89 -

565mm). Invar alloy extension

bars for minimal expansion.

Measuring range from + 2,015

to - 2,015mm. Accessories

available for cylinder liner

ovality measurement.

Is an accessory to the DI-4C

Deflection Indicator and is designed

primarily to measure cylinder liner

wear and ovality, diameters 180 –

600 mm. However, the device can

be modified to take measurements

from various applications to your

own requirements.

Crankshaft gauge Dial gauge + magnetic base

Ready-to-operate engines or compres-

sors. Assembled engines or compressors,

with connecting rod in place. Assembled

engines or compressors, with connecting

rod removed. Dismantled crankshafts,

between centres. Set Range.

[distance between webs]

KP-300 60to300 mm 0.01mm

KP-500 60to500 mm 0.01 mm

Standard dial gauge 60 mm. Ø, range

0-10 mm. graduation 0.01 mm., with

adjustable indicators for settings and

zero adjustments, with magnetic

base Options: Waterproof types and

other ranges Dial Gauge 10 mm per

0.01 mm ISSA 651403 - 398 Dial

Gauge 10 mm per 0.01 mm

ISSA 651404 - 397 Magnetic Base

ISSA 651426 - 396

Inside micrometer

Available in all sizes

Injection nozzle tester Type EFEP 60 H, 0-400 bar & psi.

Type EFEP 67 D, 0-600 bar & psi.

- Injection pump with hand lever.

- Acrylic transparent fuel container

with filter.

- Shut off valve

- Pressure gauge light and heavy Duty.

- High pressure pipes for connection

injectors.

- Accessories: High pressure pipes.

Gauge pointer puller

Essential tool

to remove

pointers from

pressure

gauges and

thermometers.

Solenoid coil tester

Simple pencil type in strument

to confirm the working of

the electromagnetic field in

a solenoid coil.

Var

iou

s

Thermometer hygrometer Dial

Anti-freeze tester Glycol tester

34

Psychrometer Stevenson screen box

Wooden housing for measuring

outside temperature and

humidity without influence by

radiation and precipitation,

supplied with wet and dry bulb

precision thermometers with

tabel, range -10/50° Celsius.

(optional °Fahrenheit).

Wet and dry bulb precision thermometers

in plastic casing for measuring temperature

and humidity with tabel, range -10/50°

Celsius. (optional °Fahrenheit)

Hair hygrometer 100 mm Ø,

for wall mounting range

0-100% relative humidity.

Hair hygrometer 100 mm. with

precision thermometer, to measure

humidity, temperature, vapor

tension and dew point.

range -10/+50° Celsius and 0-100%

relative humidity, for wall mounting.

206 ISSA 370266.

Polymeter Hygrometer

Hair hygrometer with

thermometer, for wall

mounting range 10-40°

Celsius and 30-100%

relative humidity.

Colour: White Diameter:

100mm Robust case

204 ISSA 370256

For accurate temperature readings

with hot or cold solutions directly

from the scale For all ethylene

glycol/antifreeze agents. Suspended

scale made of plastic with automatic

temperature adjustment

Battery Acid Tester Battery Hydrometer

The charged condition of the battery can

be tested using the battery acid tester.

Battery hydrometer complete with suction

hose and rubber handpump.

ISSA 792662 - 355

Kolor Kut Gasoline Finding Paste

The Paste will successfully

gauge for gasoline, crude oils,

kerosene, Jet Fuels, Naptha and

various other gas oils

and chemicals.

Var

iou

s

35

Measuring glass Sampling bottle

volumes from 10 up

to 1000 ml

Designed for sampling

products in tanks. Heavy

weight added for sampling

at any level as well from

the bottom of the tank.

Made from brass Brass ISSA

651371 - 446 Made from

stainless steel. Stainless Steel

ISSA 651373 - 447

Metal load line hydrometer Metal salinometer

Specific gravity hydrometers to determine

the density of sea/fresh water with tabel

and instructions. Range 0.995-1.040 kg/l.

scale apparent density Kg/l. in air tempe-

rature of standardization 15° Celsius.

ISSA 651384 - 451

Salinometer for boilerwater

Range 0 - 4/32 Salinometer, metal 0-4/32

ISSA 651382 - 452

Glass hydrometer

Specific gravity hydrometers for determination the

density of liquid.

Available ranges:

from 0-25 °Beaume and 0-50 °

Beaume from 0.600-0.700g/cm3, 0.700-0.800g/cm3,

0.800- ....., ....,..., 1.900-2.000g/cm3

from 0.600-0.650g/cm3, 0.650-0.700g/ cm3,

0.700- ....., ....,..., 0.950-1.000g/cm3

Including thermometer

from 0.600-0.700g/cm3, 0.700-0.800g/cm3,

0.800- ....., ....,..., 1.500-1.600g/cm3

from 0.600-0.650g/cm3, 0.650-0.700g/cm3,

0.700- ....., ....,..., 1.050-1.100g/cm3

from 1 - 11 API, 9-21 API, 19- ..., ....., ..., 79-91 API

Draft survey glass hydrometer

Specific gravity hydrometers to determine the den-

sity of sea/fresh water with conformity certificate

and instrution leaflet.

Range: 0.990 1.040 kg/l

Scale: apparent density Kg/l in air

Temperature of standarization: 15° Celsius.

Hydrometer, glass, incl. cert.

ISSA 651344 - 352

Glass hydrometer API

Specific gravity hydrometers for determination

the density of liquid.

306 API 1-11 ISSA 651351

307 API 9-21 ISSA 651352

308 API 19-31 ISSA 651353

309 API 29-41 ISSA 651354

310 API 39-51 ISSA 651355

311 API 49-61 ISSA 651356

312 API 59-71 ISSA 651357

361 API 69-81 ISSA 651358

362 API 79-91 ISSA 651359

363 API 89-101 ISSA 651360

Salinometer pot

Copper can with

wooden grip for salt-

water gravity tests

with hydrometers or

salinometers

ISSA 651386 - 445

Var

iou

s

Barometer Marine Aneroid

Marine clock Radioroom

36

Solenoid coil tester Tube clinometer

Stainless steel panel 16x5”

with single glass tube for heel

and trim angle, range 5-0-5°

sub divided 1/10°.

Simple pencil type instrument

to confirm the working of

the electro-magnetic field in

a solenoid coil.

Double glass tube for heel and trim angle on

plastic base, range 6-0-6° and 60-0-60°

Dimensions: 6”w X 3 3/4”h X 3/8”d. Degree

Range: upper ±6°, lower

±60°. Degree Markings:

upper 1°, lower 5° Case

Materials: White acrylic,

raised hot stamped

markings Tube Construc-

tion: Glass with black ball

on white background

Dial clinometer for heel and

trim angle, brass plated

130 mm. Ø dial, range 45-0-45°

with oil damping.

Dial clinometer Tube clinometer

Brass plated 130 mm.

Ø dial, with dual scale

mbar and mmHG

Brass plated 130 mm.

Ø dial, quarts battery

operated clock with

4 tree minute radio silence

periods marked on the dial.

Digital stopwatch

Stopwatch LCD display, water tight,

timing range 59 min. 59,99 sec.

with rollover and continuous timing,

High accuracy.

Analog stopwatch

Stopwatch Crown Stopper, easy to use,

start-stop-reset, metal case, reading

1/5 seconds, timing range 30 min.

Marine clock

Brass plated 130 mm.Ø dial,

quarts battery operated clock.

Mann & Hummel

Filt

ers

37

Ultra Sonic cleaning equipment

Filt

ers

HDU 27/* -T series CJC™ Filter elements

38

HDU 15/25 series HDU 27/- series

90-1500 L/h Application:

medium to large fluid systems

within land based and offshore

industries: hydraulic systems,

lubrication systems, marine

diesel engines.

Are inexpensive offline filter units

with pump capacities from 0.75 to

5 litres/ minute (0.2 to 1.3 gpm),

ideal for small hydraulic power

packs, gear boxes, tap changers

and injection moulding machines.

120 - 360 L/h

Application: marine diesel

engine lube oil filtration and

in quench oil systems.

Application: large hydraulic

systems, large industrial gears,

power turbines, control systems

and diesel engine lube oil.

HDU X*27/- Tank series 600-6000 L/h

HDU 427/- series

offline units mounted on a drain tank

base and with pump capacities from 1.5

to 50 litres/minute. Ideal for medium to

large hydraulic systems, gear boxes, diesel

engine lube oil in marine applications.

The HDU 27/* units are available in sizes

27/27, 27/54, 27/81 and 27/108, using 1,

2, 3 or 4 stacked CJC™ Filter Elements

of types A, B or BLA according to system

fluid type and volume.

Exhibit very deep oil filtration characteristics and

an extensive dirt and water absorption capacity

(up to 4 liters of dirt per element). All CJC™ Filter

Elements have an

oil filtration degree of

3 µm (micron) absolute,

i.e. 98.7% of all solid

particles > 3 µm and

approximately 50% of all

particles > 0.8 µm will

be retained in one pass.

A 15/25, A 27/27, A 38/40 and A 38/60

Application: The type A filter insert

is ideal for fine filtration of mineral

and synthetic based Engine lube

oils, Turbine lube oils, Hydraulic oils,

Gear oils, Honing oils Quenching

oils The dirt holding capacity of an

A 38/20 insert is 2.5 litres of evenly

distributed solids. The water absorp-

tion potential is up to 50% of the

total contaminant holding capacity.

B 15/25, B 27/27, BN 27/27, BM 27/27, BT 27/ 27, BG 15/25, BLA 15/25,BLA 27/27 and BLAT 27/27

Application: The B Filter Insert is especially

manufactured for CJC™ Filter Units used for filtration

of mineral oil based: Motor

Lubricating Oils, Hydraulic Oils,

Turbine Lubricating Oils, Gear Oils,

Honing Oils, Rolling Oils

*Production of the PFU-series has

been discontinued. However

the PFU applicable filter elements

are still produced

Cal

ibra

tio

neq

uip

men

t

39

Low pressure In-line filters Type L/Model GA

Low pressure In-line filters Type L/Model BGAH

High pressure filters Type H/Models 100, 200, 300

and SH100

High pressure in-line filter Type H/Model 1000

Tank mounted return line filters TypeT/Model TTF

Tank mounted return line Type T/Model BGT-S

Tank mounted return line filter Type T/Model

Tanktopper series

Medium pressure in-line filterType M/Model AGS

Medium pressure in-line filter Type M/Model MPN

Suction filterType B/Model ATZ

Medium pressure in-line filterType M/Model MGS

Low pressure In-line duplex filtersType D/Model BDK

Hydraulic filtrationreplacement elements

Insert filtersType I/Model IN-AGB

Filt

ers

Double filter Type 2.04.5

Automatic backflushing filterType 6.23/6.24

40

Basket element Filter candle insert for backflushing filters

As in the ordinary filter candle insert, several filter candles are

screwed into a single candle holder.

Filter candle insert contains several mesh candle elements of

the same size and mesh connected in parallel.

Star-pleated element has a large filter surface yet a small

diameter due to the pleating of the filter element.

Filter cartridge consists of a pleated plastic, glass fibre, non-woven

or paper element. Filter candle insert for backflushing filters.

Filter is suitable for coarse filtration or for minor contamination.

Multi-mantle elementThe mantle filter insert consists

of several cylindrical

filter mantles.

Water, oil, fuel, chemicals. Nominal width: DN 65 to DN 300.

Filter inserts: basket element, ring filter element, filter candle

insert, multi-mantle element.

Filter finenesses: 10 µm uo to >2000 µm

Flow rate: up to max. 1000 m3/h

Operating pressure: PN 10 up to PN 40

Optional equipment: -

Differential pressure indicator optical

or electric

- Internal lining

- Heating

Water, oil, fuel, chemicals, alkaline cleaning agents. Nominal

width: DN 80 to DN 150. Filter inserts: Basket element, Ring

filter element, Filter candle insert, Multi-mantle element

Filter finenesses: 10 µm up to 2000 µm.

Flow rate: up to max. 250 m3/h.

Operating pressure: PN 10 up to PN 40

Optional equipment:

- Differential pressure indicator

optical or electric

- Heating

Double filter Type 2.68.2

Single Filter Type 1.65.1/1.65.2

Water, oil, fuel

Nominal width: DN 25 to DN 80. Filter

inserts: Star-pleated element, Basket

element. FIlter finenesses: 10 µm up

to >2000 µm. Flow rate: up to

max. 70 m3/h. Operating pressure: max.

PN 24. Housing material: Grey cast iron,

Nodular cast iron. Optional equipment: -

Differential pressure indicator optical

or electric.

Fuel

Nominal width: DN 32 to DN 50. Filter inserts:

Filter discs. Filter finenesses: 34 µm abs. up

to 48 µm abs. Flow rate: up to max. 11,5 m3/h.

Operating pressure: max. PN 16. Operating

temperature: max. 150°C. Housing material:

Nodular cast iron.

Optional equipment:

- By-pass switch-over filter

- Heating

Automatic backflushing filter

Type 6.62

Fuel

Nominal width: DN 25 to DN 80. Filter

inserts: star-pleated element, Basket element.

Filter finenesses: 10 µm abs. up to

48 µm abs. Flow rate: up to max. 60 m3/h.

Operating pressure: max. PN 16.

Operating temperature: max. 150°C

Optional equipment:

- By-Pass changeover filter

Automatic backflushing filterType 6.60/6.61

Cooling lubricant, alkaline neutral cleaning

agent, fuel, lubricating oil. Technical data

fot lubricating oil. Nominal width: DN 50

to DN 350. Filter inserts: Filter candles.

Filter finenesses: 25 µm abs. up to

48 µm abs. Flow rate: up to max. 750 m3/h

Operating pressure: max. PN 10.

Operating temperature: max. 80°C

21732 GMS Map productoverzicht - ShipServ · to provide over pressure protection. The PC6-IS is the...

Documents

Transcript of 21732 GMS Map productoverzicht - ShipServ · to provide over pressure protection. The PC6-IS is the...