21128 Robin Shortform Catalogue 2014 v7

8/19/2019 21128 Robin Shortform Catalogue 2014 v7

1/28


2/28

Electrical Test Equipment from Beha-Amprobe

Beha-Amprobe two of the most famous brands

in the US and Germany have now incorporated

Robin Installation testers within the range

available to customers in the UK and Ireland.

Beha-Amprobe offers wide range of cost-

effective, innovative test equipment specically

designed to make the electrician’s job faster

and easier. This includes the Robin range of

single, dual and multifunction 17th Edition

Installation Testers specically designed for

testing xed installations in the UK and Ireland.

Beha-Amprobe products are sold and supported

by a wide range of dealers and are backed up

by a professional support service. The vast

array of Beha-Amprobe products, plus the

incorporation of the Robin electrical range,means the UK electrician has a one stop shop for

quality, value-priced products which include 17th

Edition Installation Testers, Voltage Detectors,

Multimeters, Clamp Meters, Thermometers

and Two Pole Testers - one of the largest ranges

available to the electrical contractor and engineer.

Single & Dual FunctionInstallation Testers . . . . . . . . . . . . . . . 3

Portable Appliance Testers . . . . . . . . 7

Electrical Testers . . . . . . . . . . . . . . . . 9

Clamp-on Meters . . . . . . . . . . . . . . . 12

Digital Multimeters . . . . . . . . . . . . . . 15

Temperature Measurement . . . . . . . 18

Other Test Equipment . . . . . . . . . . . 21


3/28


4/28

n Three levels of trip currents (x1/2, x1, x5) for complete

range of testing applications

- Fast Trip Function (KMP7020)

- Ramp Test (KMP7021)

n 3-LED proper connection indicator

n Phase switch selection 0° and 180° for

positive and negative semi-cycle testing

n Designed to allow testing to BS7671

IEE 17th Edition regulations

n Large display

n Safety CAT III 300V

n Non Trip Loop test

n Fast testing

n Instant reading

n 20, 200 & 2000Ω Loop measurement ranges

n PSC measurement up to 20kA

n Displays mains voltage before test

n Instant correct wiring status check



n

Backlight displayn Low Battery Indication

n CAT III 300V

KMP7020/KMP7021Digital RCD Tester

KMP7030Loop Impedance Tester

Robin-Amprobe RCD testers are simple to use devices

designed to check for correct operation of RCD devices.

They feature three levels of trip currents with either Fast Trip

or Ramp Test for complete range of testing applications.

A residual-current device (RCD) disconnects a circuit whenever

the electric current is not balanced between the energised

and the neutral conductors. The imbalance indicates that

there is a leakage current outside of the system sometimes

caused by the person accidentally touching the energised part

of the circuit, and sometimes by lack of sufficient insulation

(excessive moisture or worn out, poor quality insulationmaterials). RCDs are designed to disconnect quickly to mitigate

the harm caused by such shocks and to avoid current leaks

which may lead to fire and other dangerous situations.

Loop testing is a quick, convenient, and highly specific method

of evaluating an electrical circuit for its ability to engage

protective devices (circuit breakers, fuses, RCD’s). A “loop” is

defined by including unsuspected elements, where current has

found parallel paths to ground. A ground loop determines the

effectiveness of protective devices, therefore it is crucial to be

able to measure it, in order to detect and correct problems.

KMP7020

KMP7021

4


5/28

S i n g l e - F

u n c t i o n

I n s t a l

l a t i o n T

e s t e r s

KMP7010Ground Resistance Tester

Robin-Amprobe Ground Resistance Testers are designed

to measure resistance of the grounding systems to verify

that the system has low enough resistance to provide

protection for people, equipment and structures.

A properly functioning grounding system is a critical safety

feature of an electrical system. It is used to mitigate the risk

when exposed metal parts come in contact with dangerous

voltages in the event an installation fails. The building

structures are protected by grounding systems to divert

energy of lightning strikes straight to ground. Connections to

ground limit the build-up of static electricity when handling

flammable products or when repairing electronic devices.

n Measures Earth ground resistance -

3 point (fall of potential) or 2 point testsn Voltage measurement prevents false measurementsn Test leads, auxiliary electrodes are

included for a complete instrumentn Built-in memory to store 20 measurementsn Designed to allow testing to BS7671 IEE 17th

Edition regulationsn Safety CAT III 600V

KMP7036Insulation-Continuity Tester

n

Tests insulation of wires, cables,transformers and electrical motors

n Selectable test voltages 250V, 500V and 1000Vn Test button hold to perform the

Dielectric Absorption Ratio Testn Continuity test @ 200mA short-circuitn Designed to allow testing to BS7671

IEE 17th Edition regulationsn Built in voltmeter and red light warning

for live circuit indicationn Automatic discharge of test object after

completion of measurementn Test lead resistance zero facilityn Safety CAT III 600V

The Robin-Amprobe Insulation-Continuity Tester is designed

to diagnose and prevent the breakdown of the insulation in

various parts of the electrical system such as wires, transformers

and motors. The KMP7036 features three testing voltages

covering wide range of commercial and residential applications.

The quality of insulation is critical to assure proper,

uninterrupted and safe functioning of electrical circuits.

17A

Kits - Single Function Installation Testers

KMP7036 Insulation Tester

KMP7036 Insulation TesterCarry case includedwith both kits

KMP7030 Earth Loop Impedance Tester

KMP7030 Earth Loop Impedance Tester

KMP7020 RCD Tester

KMP7021 RCD Tester

+ +

17B

+ + 5


6/28

KMP7100Dual Function Loop /

RCD Tester

Robin-Amprobe KMP7100 is a dual function installation

tester combining both Earth Loop Impedance tester and

RCD tester in one compact easy to use package. Ideal for

use with the Robin Amprobe 7036 Insulation tester.

n Loop Functions

- Non Trip Loop test

- Fast testing - 20, 200 & 2000Ω Loop measurement ranges

- PSC measurement up to 20kA

- Displays mains voltage before test

- Instant correct wiring status check

n RCD Functions

- Three levels of trip currents (X1/2, X1, X5)for complete range of testing applications

- Phase switch selection 0° and 180° for


- Test pulse sensitive (DC) RCDs

- Auto RCD test

- Selectable 25V/50V fault voltage for RCD test



n Displays mains voltage before test

n “Test lock” for automatic start testwhen connected to circuit

n Dual measurement result display - primary display for

RCD/Loop measurement, secondary

display for circuit voltage

n Built-in Volt meter


KTS1625Digital Multifunction Tester

(Insulation / Continuity / Loop / RCD / Voltage

Safety and performance are two most critical requirements

for every electrical system. The quality of insulation, properly

working grounding system and active protection are to

assure safety of people, electrical systems and buildings

against electrocution, fire, and other equipment damage.

Robin-Amprobe KTS1625 tester verifies the safety of electrical

installations in domestic, commercial and industrial applications. It

can ensure that fixed wiring is safe and correctly installed to meetthe requirements of BS7671 IEE 17th edition wiring regulations.

n Continuity Functions

- Continuity resistance @ 200mA

n Insulation Function

- Selectable test voltages 250V, 500V & 1000V

n Line / Loop Impedance Functions

- Prospective earth fault current

- Prospective short-circuit current

- Non Trip Loop test

- Fast testing

n RCD Functions

- Three levels of trip currents (X½, X1, X5)

for complete range of testing applications

- Phase switch selection 0° and 180° for


- RCD ramp test

- Tests time delayed RCDs (S-type)

- Test pulse sensitive (DC) RCDs

- Auto RCD test



n

Voltage and frequency measurementsn Instant correct wiring status check

n Dual measurement result display

n Large, backlit display

n Low battery indication


Accessories for Robin-Amprobe testersERT2 Earth resistance kit

SL17B Standard test lead set e/leads, probes,

alligator clips and mains lead

TP1625 Test probe with remote test button for KTS1625

SL7030 Standard test lead set for KMP7030

KP1700 Single function tester kit carry bag

SL17E Fused test lead set w/probes, al ligator clips

6


7/28

Portable Appliance Testers

Robin-Amprobe Portable Appliance Test –

Built Tough to Test the Safety and Integrity

of Electrical Appliances

7


8/28

GT-400-UKPortable Appliance Tester

The new Robin-Amprobe GT-400-UK Portable

Appliance Tester, is a light- weight, portable appliance

tester that tests the integrity of electr ical devices.

Developed for the commercial electrician or facilities

maintenance persons to carry out a wide variety of

safety measurements of electrical appliances, the

GT-400-UK is extremely easy to use. Measuringearth ground and insulation resistance, as well as

current, the GT-400-UK will ensure safety,

functionality and compliance of regulatory standards.

n Intuitive and simple to use with no training required

n Easily portable for on the go testing

n Fast answers - Instantly measures safety and

integrity of electrical appliances

n Measures earth bond resistance

n Insulation resistance measurements up to 500V

n Substitute Leakage Current measurements

n Protective Conductor Current measurements

n Rugged with high quality construction for years of service

n Tests appliances for safety in accordance

with the IET Code of Practice, EN 61010 Safety Standards

8


9/28

The range of Beha-Amprobe Electrical Testers

include Non-contact & Two Pole Testers.

Electrical Testers

9


10/28

VP-720-EVoltage Tester LCD with Phase Rotation

Additional Features

n Vibration function

n Test of 30mA RCD by both push buttons,

avoids unintended tripping of RCD

n Torch function via white LED

n Quick single-hand test on 19 mm

contact distance sockets

n Built and certified according to latest voltage tester

standard EN-61243-3:2010, DIN VDE 0682-401:2011

n Voltage test via LCD-Display and

LED-Bargraph (12-690V AC/DC)

n Single pole test for phase polarity

n Continuity test

n Two pole phase indication,

no third hand required

n Switchable Load of 140 W

with two push buttons,

tripping of 30 mA RCD

n Automatic AC/DC voltage

indication, indication of polarity

n IP 64, splash-proof anddust-tight protection

n Probe tip protection for reducing

the danger of injuries (attached

to lead - permanently available)0

VP-700-EVoltage Tester with

Rotary Field Indicator

nVoltage test (12-690V AC/DC)

nTwo pole phase rotation

indication, no third hand required

nIndication of polarity

nSwitchable Load of 140 W

with two push buttons,

tripping of 30 mA RCD

nIP 64, splash-proof anddust-tight protection

nProbe tip protection for reducing


to lead - permanently available)

Additional Features

nNo unawared tripping of RCD

nNo battery required

nQuick single-hand on 19 mm contact distance outlets,

without removing test probe from instrumentnBuilt and certified according latest voltage tester

standard EN-61243-3:2010, DIN VDE 0682-401:2011

VP-710-EVoltage Tester with

Phase Rotation

Additional Features

n Quick single-hand on 19 mm contact distance outlets,

without removing test probe from instrument

n Torch function via white LED

n Built and certified according latest voltage testerstandard EN-61243-3:2010, DIN VDE 0682-401:2011

nVoltage test (12-690V AC/DC)

nTwo pole phase rotation indication,

no third hand required

nSingle pole test for phase polarity

nContinuity test

nSwitchable Load of 140 W with two

push buttons, tripping of 30 mA RCD

nAutomation AC/DC voltage

indication, indication of polarity

nIP 64, splash-proof and

dust-tight protection

nProbe tip protection for reducing


to lead - permanently available)


11/28

V o

l t a g e T

e s t e r s

11

VP-440 RTNon-contact Voltage

Tester

n Non-contact, optical

detection of AC voltages

n 50-1000V AC

n Fast, accurate detection of

cable breaks in open-ended

cables, e.g. cable drums

n Compact, handy design

that fits in any pocket

n Wide range of applications

in trade and industry

2050-DVOLTfix plus – non-contactvoltage tester

VP-450-ENon-contact VoltageTester

Non-contact, optical and acoustic

detection of AC voltages. Fast, exact

location of line breaks in cables lying

open e.g. cable drums. Reliable, automatic

self-test at start-up of the equipment

by visual standby display. Compact,

handy design, which fits in any pocket.

n CAT III 600 V

n Optical and acoustic detection

n Integrated flashlight


n Optical standby display.

n Non-contact, optical and acoustic

detection of AC voltages

n 50-600V AC

n Fast, accurate detection of

cable breaks in openended

cables, e.g. cable drums

n Reliable, automatic self-

test of activated device with

optical readiness indicator


that fits in any pocket

n Wide range of applications

in trade and industry

Additional Features

n On/off switch

nFast and accurate locating of

fuses and assignment to circuits

nLocating and tracing

of cables in walls

nSet consisting of transmitter and

receiver in robust carrying case

nTransmitter signal displayed

optically and acoustically

by the receiver

nTransmitter with integrated

BS1363 UK plug enabling easy

connection to mains socket

nSimple switching between fuse

and cable finder function

nContinuous sensitivity

adjustment of receiver

ECB50A-ECircuit Breaker Finder


12/28

Beha-Amprobe are renowned around

the world for innovative Clamp Meters.

The selection includes the Swivel Clamp

Meter and the high performance

Navigator Clamp.

Clamp-on Meters

2


13/28

ACDC-400Clamp Multimeter 400A

ACD-20SWSwivel Clamp Meter 400A

n Current, voltage and

resistance measurementn Continuity test with beeper

n Measurement of inrush

current (30 ms)

n Automatic and manual

range selection

n Integrated measurement

memory (data hold)

n Jaw opening: 50 mm

n Auto power-off

Additional Features

n Large, clear display

ACDC-100Clamp Multimeter 1000A

n Current, voltage and

resistance measurement

n Continuity test with beeper


range selection


memory (data hold, MIN/MAX)

n Relative measurement

n Additional bar graph display


n Auto power-off

Additional Features

n AC/DC clamps are also suitable

for automotive applications,

emergency power supplies

and solar technology

n Backlight

ACD-14 PLUSCurrent clamp with dual

display up to 600 A (AC)

nCurrent, voltage and

resistance measurement

nContinuity test with beeper

nCapacitance and frequency

measurement

nTemperature measurement

nMeasurement of inrush current

nAutomatic range selection

nIntegrated measurement memory

(data hold and MAX hold)


nAuto power-off

Additional Features

nDual display

nA measurement range for direct

measurement of ionisation

currents in heating systems

nMeasures current, voltage

and resistance

nAudible continuity test

nDiode test

nAuto and manual ranging

nMeasured data storage

(Data Hold)

nAccomodates conductors

up to 30 mm in diameter

nAuto-Power-Off

Additional Features

n180 degree rotating head

for the perfect display

nAdvanced VoltTect non-

contact voltage detection

C l a m p - o

n M

e t e r s

13


14/28

4

LH41Current Clamp Meter AC/DC

n Current measurement

from 1 mA AC and DC

n Manual range selection


n Automatic zero-point (DC

measurement range)

n Integrated 5 s measurement

memory (data hold)

n Auto power-off

Additional Features

n Minimum resolution: 1 mA

n Shielded against external

interference

n Leakage current measurement

n Voltage and resistance

measurement

n Continuity test with beeper



memory (data hold)

n MIN/MAX and relative

value measurement

n Additional bar graph display


n Auto power-off

Additional Features

n Minimum resolution: 0.01 mA

n Range of applications:

measurement of leakageor fault currents, current

consumption of devices in

(customer) service sector

without breaking the circuit

AC50ALeakage Clamp Meter

ACD-50NAV600A AC Navigator Clamp

n Current, voltage andresistance measurement

n Measurement of activepower (W)

n Measurement of thepower factor cos ф

n Acoustic continuity testn Capacity and frequency

measurementn Harmonics measurement for

current and voltage values(up to the 25th harmonic)

nTHD measurement

nMeasurement of theinrush currentnDisplay of the rotary

field directionnAutomatic measuring

range selectionnTRMS measurement (ACD-

52NAV, ACD-53NAV,ACD-54NAV only)


memory (Data Hold,MIN/MAX)n Additional bargraph displayn Peak value measurementn Low Pass frequency filtern Large clear display with

background lightn Clamp opening 37 mmn Auto-Power-Off

Additional FeaturesnReal effective value measurement AC+DC (TRMS)nContactless voltage detectionnMeasurement point illumination by means of white LED

ACDC-54NAV1000A AC/DC TRMSNavigator Clamp

n Current, voltage andresistance measurement

n Acoustic continuity testn Capacity and frequency measurementn Temperature measurementn Measurement of effective power (W)n

Measurement of thepower factor cos фn Harmonic measurement for

current and voltage values(up to the 25th harmonic)

n Measurement of the inrush currentn Display of the rotary field directionn Automatic measuring range selectionn Integrated measurement memory

(Data Hold, MIN/MAX)n Additional bargraph displayn Peak value measurementn Low Pass frequency filtern Large clear display with

background lightn Clamp opening 42 mm

n Auto-Power-Off

Additional FeaturesnReal effective value measurement AC+DC (TRMS)nContactless voltage detectionnMeasurement point illumination by means of white LED


15/28

15

Beha-Amprobe offer a wide range of Digital

Multimeters for the UK electrician at

affordable prices.

Digital Multimeters


16/28

6

AM-520-EURDMM

n750V AC/DC

n 10A AC/DC

n Capacitance and frequency

measurement

n Temperature measurementn Automatic and manual

range selection

n Auto power off

n Non-contact voltage detection

n Built-in flashlight

Contents

n Model AM-520 EUR

n Test leads

n 1 x Temperature probe

n Carrying case

n 1 x 9V (6F22) battery (installed)

n Users manual

n Hang strap

AM-530-EURDMM TRMS

nAC 750V/DC 1000V

n10A AC/DC

nTRMS measurement

nCapacitance and frequency

measurement

nTemperature measurement

nAutomatic and manual

range selection

nAuto power off

nNon-contact voltage detection

nBuilt-in flashlight

Contents

nModel AM-530 EUR

nTest leads

n1 x Temperature probe

nCarrying case

n1 x 9V (6F22) battery (installed)

nUsers manual

nHang strap

AM-500-EURCompact Size DMM

nAutoranging feature

automatically sets up

voltage, current, and

resistance ranges for you

nVoltage up to 600V AC/DC

nResistance

nAudible continuity

nDiode test

nData hold

nAuto power off

nLow battery warning

nSafety rated: CAT III 600V

Contents

n Model AM-500 EUR

n Test leads

n AAA x 2

n Users manual

AM-510-EURDMM

n 600V AC/DC

n10A AC/DC

n Capacitance and frequency

measurement

n Temperature measurement


range selection

n Auto power off

n Battery test (1,5V and 9V)

n Non-contact voltage detection

n Built-in flashlight

Contents

n Model AM-510 EUR

n Test leads

n 1 x 9V (6F22) battery (installed)

n Users manual


17/28


18/28

The Beha-Amprobe series of infrared and

contact thermometers are a complete

line of high performance diagnostic tools

designed for HVAC/R, electrical, industrial

maintenance applications.

Temperature Measurement

18


19/28

T e m p e r a t u r e

M e a s u r e m e n t

19

IR-710-EURInfrared Thermometer (10:1)

nExtremely accurate and reliable

nPrecise measurement with

distance to spot ratio 10:1

nWide temperatures

ranges available up to

-0°F to 716°F

(-18°C to 380°C )

nRapid response time

nLaser pointer for accurate targeting

n8 seconds auto display

hold for easy read-out

nAdjustable emissivity for

measuring a variety of materials

nDual LCD display with backlight

nSelectable ˚F and ˚C




distance to spotratio 20:1

nWide temperatures


-26°F to 1922°F

(-32°C to 1050°C )













nWide temperatures


-58°F to 2822°F

(-50°C to 1550°C )









nStores up to 99 data points

nThermocouple inputnUSB interface





nWide temperatures


-26°F to 2282°F

(-32°C to 1250°C )










20/28

20

TMD-50Thermometer

TMD-50, Type K

n Dual (Temperature

measurement with connection

for two sensors)n -60 to 1350 °C, -58 to 2498 °F

n Measurement of the

temperature difference

n Connection for two

temperature sensors type K

n Switchable for measurement

in °C or °F


memory (Data Hold)

n MIN/MAX and relative

value measurement

n Measurement of the

average temperature

nBacklit display

n Auto-Power-Off

Additional Features

n Best precision 0.1%

n T1-T2 (temperature

difference)

n Shock and impact-

resistant by standard

protective cover

IR608AInfrared Thermometer

Laser Pointer

n Non-contact temperature

measurement

n Switchable between °C

and °F measurement


memory (data hold)

n Backlight

n Distance to spot size ratio: 8:1

n Auto power-off

Additional Features

n Laser-based targeting

n Handy and compact

“pistol grip” design

IR-450-EURPocket Infrared Thermometer

nIR pocket thermometer with

8:1 distance to spot ratio

nSelectable °F / °C

nHolds temperature

reading for 10 seconds

nBright laser pointer

nBuilt-in LED flashlight to

illuminate dark areas

TH-3Relative Humidity

Temperature Meter

n Dual display

nRelative function monitors

humidity and temperature

changes

nExtended probe stem to easily

access air ducts

nMin/Max readings

Data Hold

nCapacitive sensor with

protective cover

nAuto Power off

nSoft Carrying Case

nOne-year warranty


21/28

Need something a little different? Always

check the Beha-Amprobe range. This section

has a selection of other Beha-Amprobe

test equipment for electrical and HVAC

applications.

Other Test Equipment

21


22/28

22

TMA10Anemometer ThermometerAnemometer with remote vane

n Measure CFM by inputting

the vent dimensions

n Obtain air flow average by

taking up to eight data points

n Vane has three foot cord for

measurement flexibilityn Deluxe carrying case

n Measure air velocity or air flow

n RS232 interface output

with optional software

and cable, TM-SWA

n Continuous moving average

for up to 2 hours

LM-100Light Meter Manual Ranging

n Light measurement

n 0-200,000 lux


n Silicon sensor


memory (data hold, MAX)

LAN-1Lan Cable Tester

nTest pin configuration for:

10/100 base -T cable

10 base-2 cable

RJ45 modular cables

AT&T 258A cable

EIA/TIA 568A/568B cables

Token Ring Cable

nVerify the cable wiring for

continuity, opens, shorts or

incorrect wiring

nTest installed cable on wallplate or the patch panels by

using the Remote

Termination module

nPerform Loopback Test

or Remote Test

nBuzzer sound warning for

error condition in cable

nTwo sets of LED lights for

Source and Test indication

LM-120Light Meter withAuto Ranging

nMeasure in Lux or Footcandles,

front panel switchable

nMeasuring Range to 200,000

Lux or 20,000 Foot candlesnSilicon photodiode

sensor and filter

nData Hold to freeze reading

on the digital display

nMIN / MAX ability to show

high and low readings

nAutoranging plus Manual Range

nZero function to null

display before a reading

nAuto Power Off to

PRM4

Phase Sequence and MotorRotation Tester

n Identifies 3-phase sequence

and open phase check

n Motor shaft rotation indication

protected by CAT III circuitry

n CAT III 600V rated for

both testing segments

n Meets current EN61010 safety

requirements, CSA, EN61557-7

n Supplied with three CAT IIIrated color coded large

alligator clips and test leads

n Zippered carrying case

for portability


23/28

O

t h e r s

23

SM-10Sound Meter

nMeasurement of sound leveln30-130 dB

nMeasurement according to

frequency evaluation filters A

and C, with direct display in dB

nIntegrated measurement

memory (data hold, MAX)

nSwitchable between fast

and slow response times

nBacklight

TACH20Combo Tachometer

nMeasures rotational

and surface speed

nBuilt-in memory

nDigital Display

nAuto power off function

nEasy to select units

and mode functions

nContact and non-

contact measurement

nSelect rpm using infrared

beam or adapter: m/min, m/sec, ft/min, ft/sec, in/min, m, ft, and in.

nIncludes 6 Adapters, Carrying

Case, Reflective Tapes,

Batteries and User Manual

PQ55ACompact Power Analyser

n Comprehensive real time

monitoring, recording and

analysis of three phase

power systems

n True-rms voltage and

current measurementn Power Factor and

phase angle results

n Power Analysis (apparent,

active and reactive power)

TX900Microwave Leakage

Detector

n Measures for wave leakage

and tests oven power

n 8 dipole sensors – allows

detection of plane wave signals

of any polarization

n Temperature compensation

– accurate reading regardless

of ambient temperature changesn Compact, ergonomic design

n Low battery indication

n Analog Bar Graph

n Auto-zero

LT-10-EURLamp Tester

nDetermine if fluorescent light

bulbs are operational prior

to installation or removal

nVerify voltage presence without

the need for another tool with

built-in VolTect™ non-contact

voltage detection

nIncrease productivity

by minimising trips up

and down a ladder

nAll tests performed with easy,

single button operation

nUltra-compact design

for portability

nIndustry leading 120cm

(48”) removable, fully

retractable antenna

nInsulated antenna sleeve

for safe testing


24/28

24

Specifications (At 23°C ± 5°C, 45% to 75% RH)

Insulation Resistance @250V/500/1000V (TestCurrent ≥ 1mA)

0.00MΩ ~ 250MΩ@ 250V0.00MΩ ~ 500MΩ@ 500V0.00MΩ~1000MΩ@ 1000V

(Buzzer threshold: 2MΩ)

±(5% rdg + 5 LSD)

Continuity @ IN ≥ 200mA,Uo=5Vdc (Nominal)

0.00Ω ~ 199Ω(Buzzer threshold: 20Ω)

±(2% rdg + 5 LSD)

AC Voltage Measurement 0Vac ~ 400Vac ±(5% rdg + 2 LSD)@ 45 to 65Hz

Operating Voltage(Loop and RCD)

230Vac, 45Hz ~ 65 Hz +10% to -15%

Line Impedance (L – N) @ 25A 0.01Ω ~ 1.99Ω / 2.0Ω ~19.9Ω / 20Ω ~ 2000Ω

±(5% rdg + 5 LSD)

Loop Impedance

(L – PE) @ 25A

0.01Ω ~ 1.99Ω / 2.0Ω ~

19.9Ω / 20Ω ~ 2000Ω

±(5% rdg + 5 LSD)

Loop impedance withouttripping @ 15mA

0.01Ω ~ 1.99Ω / 2.0Ω ~19.9Ω / 20Ω ~ 2000Ω

± (5% rdg + 12 LSD+ Noise Margin

(0.01 - 1.99Ω))

Prospective Short CircuitCurrent (PSC) @ 25A

Prospective Earth Fault

Current (PSC) @ 25A

0.00A ~ 1.99A / 2.0A~ 19.9A / 20A ~ 199A

/ 200A ~ 1.99kA

/ 2.0kA ~ 26kA

PSC accuracy derivedfrom measured loop

impedance specification

and measuredvoltage specification

RCD Test Current 10/30/100/300/500mA 0% to 10% @1∆n and 5∆n≤-10% to 0% @ ½∆n

RCD Trip Times @ X½ 0 ~ 2000ms(10/30/100/300/500mA)

±(1% rdg + 2 ms)

RCD Trip Times @ X1 0 ~ 500ms (selective)(10 / 30 / 100 /300 / 500mA)

±(1% rdg + 2 ms)

RCD Trip Times @ X1 0 ~ 300ms (10 / 30/ 100 / 300mA)

±(1% rdg + 2 ms)

RCD Trip Times @ X5 0 ~ 40ms (10 /

30 / 100mA)±(1% rdg + 2 ms)

RCD Auto Test X½ / X1 / X5 (10

/ 30 / 100mA)Trip time: ±(1% rdg +

2 ms) Trip current: 0%to 10% @ 1∆n and 5∆n-10% to 0% @ ½∆n

RCD RAMP Test X½ / X1 / X5 (10 / 30/ 100 / 300 / 500mA)

50% ~ 110% Defaultnominal residual

currents (I∆n).Increasing by10%, total 7

steps of residual current

Fault Voltage Detection(N – PE conductor)

50Vac or more

Operating Temperature 0°C to +40°C, ≤ 85% RH, no condensation

Storage Temperature -20°C to +60°C, ≤ 90% RH, nocondensation (without batteries)

Power Supply 1.5V Alkaline Battery (AA Battery) × 8 pcs

Dimensions (L x W x H) 189 x 168 x 85 mm (7.43 x 6.65 x 3.35 in)

Product Weight Approx. 1.3 kg (2.87 lb) with batteries installed

Regulat ion Compliance Designed to a llow test ing to BS7671IEE 17th Edition regulations

BS EN 61010-1 CAT III 300VBS EN 61557-1 / -2 / -3 / -4 / -6 / -10

BS EN 61326-1 (EMC)

Included Accessories 3-Wires mains test cord set , test lead (red,black green), test probe (red, black, green),alligator clips (red, black, green), Test probewith Remote Test Button, users manual,strap and carrying case

KTS1625


Operating Voltage 230Vac, 45Hz ~ 65 Hz +10% to -15%

Earth Loop Impedance 20Ω 0.01Ω ~ 19.99Ω@ Nominal Test

Current 25A

±(3% rdg + 4 LSD)

Earth Loop Impedance 200Ω 20.0Ω ~ 199.9Ω@ Nominal Test

Current 2.3A

±(3% rdg + 4 LSD)

Earth Loop Impedance 2000Ω 200Ω ~ 1999Ω@ Nominal Test

Current 15mA

±(3% rdg + 4 LSD)

Non tripping Loop test 20Ω 0.01Ω ~ 19.99Ω ±(3% rdg + 6 LSD)

Non tripping Loop test 200Ω 20.0Ω ~ 199.9Ω ±(3% rdg + 7 LSD)

Prospective Short Circuit

Current (PSC)200A / 2000A / 20kA

0.0 ~ 199.9 /

1999 / 19.9kA

PSC accuracy derived

from measured loop

impedance specificationand measured

voltage specificationRCD Test Current 10/30/100/300/500mA 0% to 10% @

1∆n and 5∆n≤-10% to 0% @ ½∆n

RCD Trip Times @ X½ 0 ~ 2000ms(10/30/100/300/500mA)

±(1% rdg + 2 ms)

RCD Trip Times @ X1 0 ~ 1000ms (selective)(10/30/100/300/500mA)

±(1% rdg + 2 ms)

RCD Trip Times @ X1 0 ~ 1000ms

(10/30/100/300mA)±(1% rdg + 2 ms)

RCD Trip Times @ X5 0 ~ 40ms

(10/30/100mA)±(1% rdg + 2 ms)

RCD Auto Test X½ / X1 / X5 (10/ 30 / 100mA)

Trip time: ±(1%rdg + 2 ms)Trip current: 0% to10% @ 1∆n and 5∆n

-10% to 0% @ ½∆nRCD RAMP Test X½ / X1 / X5 (10 / 30

/ 100 / 300 / 500mA)50% ~ 110% Defaultnominal residual

currents (I∆n).Increasing by 10%,total 7 steps of

residual current

Fault Voltage Detection(N – PE conductor)

Selectable 25V or 50Vac

Voltage Measurement 0Vac ~ 600Vac ± (2% rdg + 3 LSD)@ 45Hz ~ 65 Hz





Product Weight Approx. 450g (0.99 lb)

Regulation Compliance Designed to a llow test ing to BS7671IEE 17th Edition regulations

BS EN 61010-1 CAT III 300V

BS EN 61557-1 / -3 / -6 / -10BS EN 61326-1 (EMC)

Included Accessories 3-wires mains test cord with UK plug , test leads(red, black green), test probes (red, black,green), alligator clips (red, black, green),users manual, strap and carrying case

KMP7100

Multi-Function Installation Testers

Technical Specification


25/28

T e c

h n

i c a l

S p e c i f

i c a t

i o n

25


Earth Resistance Measurement 0.00Ω ~ 40.00Ω0.0Ω ~ 400.0Ω0Ω ~ 4000Ω

± (2% rdg + 20 LSD)± (2% rdg + 3 LSD)± (2% rdg + 3 LSD)

Voltage Measurement 0Vac ~ 400Vac ± (1% rdg + 6 LSD)@ 50 / 60 Hz

Operating Temperature +5°C to +40°C, ≤80% RH, no condensation

Storage Temperature -20°C to +60°C, ≤90% RH, nocondensation (without batteries)



Product Weight Approx. 500g (1.1 lb) with batteries installed

Regulation Compl iance Designed to al low testing to BS7671

IEE 17th Edition regulationsBS EN 61010-1 CAT III 400V

BS EN 61557-1, BS EN 61557-5

BS EN 61326-1 (EMC)

Included Accessories Three Test Leads (Green, Yellow and Red),Auxiliary ground rods, Two test leads withalligator clips, Batteries ( 6 x AA), UsersManual, Strap and Carrying case


Insulation Resistance @

250V/500/1000V (TestCurrent ≥1mA)

0.00MΩ ~ 4.99MΩ5.0MΩ ~ 49.9MΩ50MΩ ~ 999MΩ1.00GΩ ~ 1.99GΩ(Buzzer threshold: 4MΩ)

± (3% rdg + 5 LSD) for0.00MΩ ~ 99.9MΩ± (5% rdg + 5 LSD) for 100MΩ ~ 1.99GΩ

Continuity @ IN ≥200mA,Uo=5Vdc (Nominal)

0.00MΩ ~ 9.99 MΩ10.0MΩ ~ 99.9 MΩ

± (2% rdg + 5 LSD)

AC Voltage Measurement 30Vac ~ 750Vac ± (2% rdg + 3 LSD)@ 50 / 60Hz

Operating Temperature 0°C to +35°C, ≤75% RH, no condensation

Storage Temperature -20°C to +60°C, ≤80% RH, nocondensation (without batteries)



Product Weight Approx. 450g (0.99 lb) with batteries installed

Regulat ion Compliance Designed to a llow test ing to BS7671IEE 17th Edition regulations

BS EN 61010-1 CAT III 600V

BS EN 61557-1 / -2 / -4 / -10BS EN 61326-1 (EMC)

Included Accessories Test Leads (red, black), probes (red, black),alligator clips (red, black), Battery, InstructionManual, Carrying case, Strap

KMP7010 KMP7036


Operating Voltage 230Vac, 45Hz ~ 65 Hz +10% to -15%

Loop Impedance 20

/ 200 / 2000Ω0 ~ 19.99 / 199.9

/ 1999 Ω±(3% rdg + 4 LSD)

AC Test Current 25A Nominal at 20Ω

AC Test Period 10ms at 20Ω

No Trip Loop Impedance20 / 200Ω

0 ~ 19.99 / 199.9 Ω (L – N impedance > 20 Ω)

± (3% rdg + 6 LSD)

PSC Measurement 200A/ 2000A / 20kA

0.0 ~ 199.9 /1999 / 19.9kA

PSC accuracy derivedfrom measured loop

impedance specification

and measuredvoltage specification

Voltage Measurement 100Vac ~ 300Vac ± (2% rdg + 4 LSD)@ 50/60Hz






Regulat ion Compliance Designed to a llow test ing to BS7671

IEE 17th Edition regulationsBS EN 61010-1 CAT III 300V

BS EN 61557-1, BS EN 61557-3BS EN 61326-1 (EMC)

Included Accessories Mains Test cord with Earth Probe,

Batteries (8 x AA), User’s Manual,Strap and Carrying Case


Operating Voltage 230Vac, 50 Hz +10% to -15%

Trip current @ X½ 10/20/30/100/300/500mA

(trip time 0 to 2000ms)Trip current tolerance:

-10% to +10%Trip Time: ± (2%

rdg + 2 LSD)

Trip current @ X1 10/20/30/100/300mA(trip time 0 to 1000ms)500mA (trip time0 to 300ms)

Trip current tolerance:0% to +10%

Trip Time: ± (2%rdg + 2 LSD)

Trip current @ X5 10/20/30mA (trip

time 0 to 40ms)Trip current tolerance:

0% to +10%Trip Time: ± (2%

rdg + 2 LSD)

Fast Trip Current (KMP7020) 250mA (trip time0 to 40ms)

Trip current tolerance:0% to +10%

Trip Time: ± (2%

rdg + 2 LSD)Ramp Test (KMP7021) 10/20/30/100/300/500mA -10% to +10%

Ramp increase by 10%Default nominal residual currents

from 20% to 110%

Maximum measuring time 300ms x 10 times

Operating Temperature 0°C to +40°C, ≤80% RH, no condensation

Storage Temperature -20°C to +60°C, ≤90% RH, no condensation

Power Supply AC mains 230V +10% -15%, 50 Hz



Regulation Compl iance Designed to al low testing to BS7671


BS EN 61010-1 CAT III 300VBS EN 61557-1, BS EN 61557-6

BS EN 61326-1 (EMC)

Inc luded Accessories 3-Wires Mains Test Cord, Test Lead Set,Users Manual, Strap and Carrying case

KMP7020/KMP7021 KMP7030

Single-Function Installation Testers


26/28

Technical Specification

26

Clamp-on Meters

Clamp Multimeter Comparison GuideACD-14 Plus ACDC-400 ACD-20SW ACDC-100 ACD-50NAV

Display

LCD, 33/4-digit,

4000 digits

LCD, 3¾ Digit,

3999 Count

LCD, 3¾ Digit,

3999 Count

LCD, 3¾ Digit,

4000 Count

LCD, 3¾ Digit,

4000 Count


R a n g e s

Current AC 0.01 - 600 A 0.01 A - 400 A 0.01 - 400 A 0.1 A - 800 A 0.01 - 600 A

Tolerance ±(1.9% rdg. + 8 digits) ±(1.5% rdg. +3 Digits) ±(2% rdg +6 Digits) ±(1.5% rdg. +5 Digits) ±(1.5 % rdg. +5 Digits)

Frequency Range 50/60 Hz 50/60 Hz 50-60 Hz 50 Hz - 400 Hz

Current DC - 0.01 A - 400 A - 0.1 A - 1000 A -

Tolerance - ±(1.5% rdg. +3 Digits) - ±(1.5% rdg. +4 Digits) -

Voltage AC 0.001 - 600 V 0.1 mV - 600 V 1.0 mV-600,0 V 0.1 mV - 600 V 0.01 - 1000 V

Tolerance ±(1.5% rdg. + 5 digits) ±(1% rdg. +3 Digits) ± (1.2% rdg +5 Digits) ±(1% rdg. +4 Digits) ±(1 % rdg. +5 Digits)

Frequency Range 50 - 400 Hz 50 - 500 Hz 50 - 500 Hz 50 - 500 Hz 50 Hz - 500 Hz

Voltage DC 0.1 - 600 V 0.1 mV - 600 V 0.1 mV - 600 V 0.1 mV - 600 V 0.01 - 1000 V

Tolerance ±(0.5% rdg. + 3 digits) ±(0.8% rdg. +2 Digits) ±(0.5% rdg +2 Digits) ±(0.5% rdg. +3 Digits) ±(0.7 % rdg. +2 Digits)

Continuity R < 120 Ω R < 40 Ω R < 25 Ω R < 120 Ω R < 30 Ω

Frequency 0.001 Hz - 100 kHz - - - 20,00 - 9,999 kHz

Resistance 0.1 - 40.00 MΩ 0.1 Ω - 40 MΩ 0.1 Ω - 40 MΩ 0.1 Ω - 40.00 MΩ 0.1–99.99 kΩ

Tolerance ±(0.8% rdg. + 6 digits) ±(1% rdg. +3 Digits) ±(1.0% rdg +4 Digits) ±(0.8% rdg. +6 Digits) -

Capacity 0.1 nF - 3000 µF - - - -

Active Power - - - - 0 - 600.0 kW

Cos Phi - - - - -1.00–0.00 – +1.00

Harmonics - - - - display up to the 25th

F e a t u r e s

Jaw Opening Ø 26 mm Ø 30 mm Ø 30 mm Ø 50 mm Ø 37 mm

Pollution Degree 2 2 2 2 2

Overvoltage Category CAT III/600 V CAT III/600 V CAT lll/600 V CAT III/600 VCAT IV 600V,CAT III 1000V

Safety EN 61010/IEC 61010DIN VDE 0411,

EN 61010, IEC 61010DIN VDE 0411,

EN 61010/IEC 61010DIN VDE 0411,

EN 61010, IEC 61010DIN VDE 0411,

EN 61010, IEC 61010

Power Supply2 x 3 V battery,IEC CR2032

2 x Battery 1.5 V,IEC LR03

2 x Batterie 1.5 V,IEC LR03


1 x Battery 9 V,IEC 6F22

Dimensions 190 x 63 x 32 mm 205 x 64 x 39 mm 240 × 70 × 41 mm 227 x 78 x 40 mm 260 x 80 x 40 mm

Weight approx. 200 g approx. 280 g approx. 220 g approx. 290 g approx. 480 g

Clamp Multimeter Comparison GuideACDC-54NAV LH41 AC50A

DisplayLCD, 3¾ Digit,

4000 Count

LCD, 3¾ Digit,

4000 Count

LCD, 3¾ Digit ,

3999 Count


R a n g e s

Current AC 0.01-1000 A 0.001 - 40 A 0.01 mA - 60 A

Tolerance ±(1.5 % rdg. +5 Digits) ±(1.3 % rdg. +5 Digits) ±(1.5% rdg. +5 Digits)

Frequency Range 50 Hz - 400 Hz 40 - 400 Hz 40 Hz - 1 kHz

Current DC - 0,001 - 40 A -

Tolerance - ±(1.3 % rdg. +5 Digits) -

Voltage AC 0,01 - 1000 V - 0,1 - 400 V

Tolerance ±(1 % rdg. +5 Digits) - ±(2% rdg. + 4 Digits)

Frequency Range 50 - 500 Hz - 40 Hz - 1 kHz

Voltage DC 0.01 - 1000 V - -

Tolerance ±(0.7% rdg. +2 Digits) - -

Continuity R < 30 Ω - R < 40 Ω

Frequency 20.00 - 9.999 kHz - -

Resistance 0.1–99.99 kΩ - 0.1 - 400 Ω

Tolerance ±(1% rdg. +5 Digits) - ±(1% rdg. +2 Digits)

Capacity - - -

Active Power 0 - 999.9 kW - -

Cos Phi -1.00–0.00 – +1.00 - -

Harmonics display up to the 25th - -

Temperature -50 °C-1000 °C - -

Input Impedance - - 10 MΩ

F e a t u r e s

Jaw Opening Ø 37 mm Ø 19 mm Ø 30 mm

Pollution Degree 2 2 2

Overvoltage Category

CAT IV 600V,

CAT III 1000V CAT III/600 V CAT III/600 V

SafetyDIN VDE 0411,

EN 61010/IEC 61010

DIN VDE 0411,

EN 61010, IEC 61010

DIN VDE 0411

EN 61010, IEC 61010

Power Supply1 x battery 9 V,

IEC 6F22

1 x Battery 9 V, IEC 6LR61


Dimensions 260 x 80 x 40 mm 184 x 71 x 31 mm 210 x 62 x 36 mm

Weight approx. 480 g approx. 235 g approx. 200g


27/28

T e c

h n

i c a l

S p e c i f

i c a t

i o n

27

Portable Appliance Testers

Specifications GT-400-UK Protective conductor resistance 0.10 ... 2.00 Ω ± (5% + 10 digits) Insulation resistance 0.100 ... 9.999 MΩ, 10.00 ... 20.00 MΩ ± (5% + 2 Digits) Substitute leakage current 0.100 ... 9.999 mA, 10.00 ... 20.00 mA ± (5% + 2 Digits)

Supplied with Test leads, alligator clip, test probe, IEC lead, carrying

case, 6 AA batteries, users manual

Protective Conductor Resistance Measuring range 0.10 ... 2.00 Ω Display range 0.05 ... 2.00 Ω Resolution 0.01 Ω Tolerance ± (5% + 10 digits) Measuring current / voltage Min. ± 200 mA DC / > 4 V

Insulation Resistance Measuring range 0.1 ... 20 MΩ Display range 0.1 ... 20 MΩ Resolution 0.1 ... 9.999 MΩ 0.001 MΩ / 10.00 ... 20.00 MΩ 0.01 MΩ Tolerance ± (5% + 2 digits) Measuring current / voltage Min . 500 V DC / >1 mA

Substitute Leakage Current Measuring range 0.1 ... 20 mA Display range 0.1 ... 20 mA Resolution 0.1 ... 9.999 mA 0.001 mA / 10.0 ... 20.00 mA 0.01 mA Tolerance ± (5% + 2 digits) Measuring current / voltage Approximately 32 V AC

General Specifications

Power supply 6 x 1.5 V Batteries (IEC LR6 (AA) 6 x 1.2 V NiMH rechargeable batteries

Degree of pollution 2 Overvoltage category CAT II 300 V

Protection degree IP40 Protection class II Electrical safety EN61010-1/VDE0411 EMC emission EN61000-6-3 EMC interference resistance EN61326-1 Dimensions (L x W x H) Approximately 265 x 110 x 50 mm Weight Approximately 700 g

GT-400-UK

Digital Multimeters

Series Selection Guide AM-500-EUR AM-510-EUR AM-520-EUR AM-530-EUR AM-540-EUR AM-550-EUR

MULTIMETER TYPE Autoranging Com / Res HVAC Electrical Adv. HVAC Industrial

F u n c t i o n s

Safety Rating Safety CAT III 600V CAT III 600V CAT III 600VCAT II 1000 CAT III 600VCAT II 1000 CAT IV 600CAT III 1000 CAT IV 600CAT III 1000

Measure voltage in noisy environments True-rms n n

Electrical panels, AC outlets AC Voltage (V) 600 600 750 750 1000 1000

DC systems, auto/marine batteries DC Voltage (V) 600 600 1000 1000 1000 1000

AC Current - electrical panels, appliances AC Current (A) 10 10 10 10 10 10

DC Current - electronics, DC motors DC Current (A) 10 10 10 10 10 10

Specified resistance and continuity Resistance (MOhms) 20 40 40 40 60 60

Flame sensors Microamps n n n n n n

Diodes in AC to DC converters Diode Test n n n n n n

Fuses, li ghtbulbs, wire connect ions Continui ty n n n n n n

Household batteries Battery test n n

Motor startup or run capacitors Capacitance n n n n n

Frequency verification Frequency n n n n n

Non-contact voltage test Non-contact voltage n n n n n

Electrical load-time on vs time off Duty cyc le n n n

Temp of air vents, fuses, transformers Temperature inputs 1 1 2 2

F e a t u r e s

Automatically selects measurement range Autoranging n n n n n n

Manually select measurement range Manual ranging n n n n n

Voltage on variable frequency drives Low pass fi lter n n

Detect stray voltages Low Z n

Dimly lit areas Built-in flashlight n n n n n

D i s p

l a y

Meter resolution LCD Counts 2,000 4,000 4,000 4,000 6,000 6,000

Dimly lit areas Backlight n n n n n

Monitoring fast changing signals Bar graph n n n n

Two relative measurements on one screen Dual display n n

E v e n t s

Data memory Data hold n n n n n n

Difference between two measurements Relative reading n n n n n

Max/min peak measurement Max/min hold n n n n

Specialised signal measurements Peak hold (crest) n n

Subject to change


28/28

Robin-Amprobe ® Test Tools UK

52 Hurricane Way, Norwich, Norfolk, NR6 6JB, United KingdomWeb: www.robin-amprobe.co.uk / www.beha-amprobe.com

21128 Robin Shortform Catalogue 2014 v7

Documents

Transcript of 21128 Robin Shortform Catalogue 2014 v7