8/11/2019 21-22New

1/2

2221

SPECIFICATION:

APPLICATION:

SALIENT FEATURES:

MATERIALS OF CONSTRUCTION:

SHOP TESTING:

OPTIONAL FEATURES:

These gates are made generally as per IS:3042.

These gates are mounted on the face of a wall and are used to isolate flow in andout of a conduit and are manufactured for seating heads upto 15 meters. Thesegates are not suitable for unseating head application.

Spigot back frame designed for mounting on wall through grouting of spigot inwall opening and anchoring of frame face on face of wall using anchor bolts.

Closed top frame upto gates size 1000x1000 and open top frame for gatesbigger than this size.

Suitable for seating head application only.

Fixed taper wedges on shutter to match with adjustable taper wedges providedon frame.

Non corroding metal to metal sealing faces/strips on the periphery of gateaperture for conventional bottom closure gates. Sealing faces fitted by countersunk head machine screws on plain machined faces of frame & shutter.

Offered with conventional bottom closing.

Provided with pin and knuckle type stem connecting arrangement to connectthe shutter with the spindle.

Rising spindle gate with lift mechanism mounted on separate platform abovegate frame to transfer thrust reaction on platform.

Single piece or multi-piece spindle as required to connect the shutter to thegate operating arrangement.

Couplings as required to connect the multi-piece spindles.

Fixed type stem guide brackets as required to guide the spindle.

Manual lift mechanism to enable a single person to operate gate with effort

8/11/2019 21-22New

2/2