· 2018-02-22 · • If the aftermarket radio has an illumination wire, connect the Orange/White...
Transcript of · 2018-02-22 · • If the aftermarket radio has an illumination wire, connect the Orange/White...
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/21/18 INST99-5846B
I N S TA L L AT I O N I N S T R U C T I O N S99-5846B
KIT FEATURES• ISODINradioprovisionwithpocket• ISODDINradioprovision• Touchscreendisplayforclimateandpersonalizationfeatures• Integratedhazardbuttonandpassengerairbaglight• Radiocanbemounteduptoporatbottom• PaintedMatteBlack
TOOLS REQUIRED•Panelremovaltool•Phillipsscrewdriver•10mm&9/32”Socketwrench
TABLE OF CONTENTS
DashDisassembly..................................................2KitPreparation....................................................... 3KitAssembly–ISODINradioprovisionwithpocket..................4–ISODDINradioprovision.....................................4AxxessInterfaceInstallation............................ 5-13
WIRING & ANTENNA CONNECTIONS
WiringHarness:AxxessinterfacebuiltintotouchscreenAntennaAdapter:Included
FordF-150(with4.2”screen)2013-2014
KIT COMPONENTS•A)Radio/Displaytrimpanelwithtouchscreendisplay•B)Radio/Displaysub-trimpanelupper(a)•C)Radio/Displaysub-trimpanellower(b)•D)Radiobracketsupper(a)•E)Radiobracketslower(b)•F)Pocket•G)(4)Panelclips•H)(11)#6x3/8”Phillipspan-headscrews•I)(4)#8x3/8”Phillipstruss-headscrews•J)Touchscreendisplayassemblyandwiringharness•K)Antennaadapter(notshown)
A B C D
H I J
E F G
1.800.221.0932 | MetraOnline.com2
DASH DISASSEMBLY
1. Openandlowertheglovebox,thenremove(3)10mmboltsfrominsidethegloveboxfacingup.(FigureA)
2. Remove(1)7mmscrewsecuringthetrimpaneltotherightoftheradio,thenunclipandsettotheside.(FigureB)
3. Remove(4)9/32”screwssecuringtheradio/climatecontrolpaneltothedash,thenunclip,unplug,andremove.(FigureC)
4. Remove(4)9/32”screwssecuringtheradiochassis,thenunplugandremove.(FigureD)
5. Remove(4)9/32”screwssecuringthefactorydisplay,thenunplugandremove.(FigureD)
6. Unsnap,unplug,andremovethetractioncontrolbuttonandsaveforkitassembly.
ContinuetoKitPreparation
(FigureC)(FigureA)
(FigureB)
(FigureD)
REV. 2/21/2018 INST99-5846B 3
KIT PREPARATION
1. Therearetwodifferentradio/displaysub-trimpanelstochoosefrom.Oneformountingtheradiointheupperportionofthekit,andanotheroneformountingitinthelowerportion.(FigureA)Ifmountingtheradiointheupperportion,afactorymodulewillneedtobere-located:
a.Removethemodulefromthesub-dashandrelocateittothebottomofthedashopening.Themountingbracketsattachedtothemodulewillneedtobebentoutwardtomakeroomfortheradio.
(FigureB) (FigureD)
(FigureA) (FigureC)
2. Attachthedesiredradio/displaysub-trimpaneltotheradio/displaypanelusingthe(12)#6x3/8”pan-headscrewsprovided.(FigureB)
3. Attachthetouchscreendisplayassemblytotheradio/displaysub-panelusingthe(4)#8x3/8”truss-headscrewsprovided.(FigureC)
4. Snapthefactorytractioncontrolbuttonintothepanel.
5. Attachthe(4)panelclipsprovidedtotheradio/displaypanel.(FigureD)
ContinuetoKitAssembly
1.800.221.0932 | MetraOnline.com4
KIT ASSEMBLY
(FigureA) (FigureA)
ISO DIN radio provision with pocket
1. Securethepockettotheradiobracketsusingthe(4)#8x3/8”Phillipspanheadscrewssupplied.(FigureA)
2. RemovethemetalDINsleeveandtrimringfromtheaftermarketradio.
3. Slidetheradiobetweenradiobrackets,thensecurewiththescrewssuppliedwiththeradio.(FigureB)
ContinuetoAxxessInterfaceInstallation
ISO DDIN radio provision
1. Securetheradiototheradiobracketsusingthescrewssuppliedwiththeradio.(FigureB)
ContinuetoAxxessInterfaceInstallation
REV. 2/21/2018 INST99-5846B 5
AXXESS INTERFACE INSTALLATION
INTERFACE FEATURES
INTERFACE COMPONENTS• Axxessinterface(builtintothetouchscreendisplay)• 5846harness• 4-pinflatto4-pinstackedharness• 16-pinharnesswithstrippedleads• 12-pinbackupcameraharness• 4-pinharnesswithyellowRCAjacks• Hazardharness• Female3.5mmconnectorwithstrippedleads
TOOLS REQUIRED•Wirecutter•Crimptool•Soldergun•Tape•Connectors(example:butt-connectors,bellcaps,etc.)
TABLE OF CONTENTS
Connectionstobemade...........................................................................................................6-7Installingtheinterface................................................................................................................. 8Initializingtheinterface............................................................................................................... 9Finalassembly.............................................................................................................................. 9Extrafeatures(SYNC).................................................................................................................... 9Touchscreendisplayoperation...............................................................................................10-11Steeringwheelcontrolsettings.............................................................................................12-13
• Providesaccessorypower(12-volt10-amp)• RetainsR.A.P.(retainedaccessorypower)• ProvidesNAVoutputs(parkingbrake,reverse,speedsense)• Retainsaudiocontrolsonthesteeringwheel• RetainsSYNC®
• Retainsthefactorybackupcamera• Retainsbalanceandfade• Micro“B”USBupdatable
1.800.221.0932 | MetraOnline.com6
CONNECTIONS TO BE MADE
From the 5846 harness to the aftermarket radio:
• ConnecttheBlackwiretothegroundwire.
• ConnecttheYellowwiretothebatterywire.
• ConnecttheGreenwiretotheleftrearpositivespeakeroutput.
• ConnecttheGreen/Blackwiretotheleftrearnegativespeakeroutput.
• ConnectthePurplewiretotherightrearpositivespeakeroutput.
• ConnectthePurple/Blackwiretotherightrearnegativeoutput.
• Tapeoffanddisregardthefollowing(1)wire,itwillnotbeusedinthisapplication:Blue
• For models with SYNC®:ConnecttheRedandWhiteRCAjackslabeled“RSE/SYNC/SAT”totheaudioAUX-INjacksoftheaftermarketradio.
• For models without SYNC®:ConnecttheRedandWhiteRCAjackslabeled“FROM3.5”totheaudioAUX-INjacksoftheaftermarketradio.
• DisregardtheDINjack,itwillnotbeusedinthisapplication.
Continuedonthenextpage
From the 16-pin harness with stripped leads to the aftermarket radio:
• Connectthe(2)Redwirestotheaccessorywire.
• Ifequippedwithafactorysubwoofer,connecttheBlue/Whitewiretotheampturnonwire.
• Iftheaftermarketradiohasanilluminationwire,connecttheOrange/Whitewiretoit.
• Iftheaftermarketradiohasamutewire,andthevehicleisequippedwithSYNC®,connecttheBrownwiretoit.Ifthemutewireisnotconnected,theradiowillturnoffwhenSYNC®isactivated.
• ConnecttheGraywiretotherightfrontpositivespeakeroutput.
• ConnecttheGray/Blackwiretotherightfrontnegativespeakeroutput.
• ConnecttheWhitewiretotheleftfrontpositivespeakeroutput.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.
• Tapeoffanddisregardthefollowing(4)wires,theywillnotbeusedinthisapplication:Green,Green/Black,Purple,Purple/Black
Thefollowing(3)wiresareonlyformultimedia/navigationradiosthatrequirethesewires.
• ConnecttheBlue/PinkwiretotheVSS/speedsensewire.
• ConnecttheGreen/Purplewiretothereversewire.
• ConnecttheLight Greenwiretotheparkingbrakewire.
REV. 2/21/2018 INST99-5846B 7
CONNECTIONS TO BE MADE (CONT)
12-pin backup camera harness:
There are two different methods for connecting the factory backup camera.
If retaining the camera to the aftermarket radio is desired:
• ConnecttheYellowRCAjackthebackupcamerainputoftheaftermarketradio.
If retaining the camera to the touchscreen display is desired:
• ConnecttheYellowRCAjack,totheYellowRCAjackfromthe4-pinharnesswithyellowRCAjackslabeled“Rearviewcamera”.
Note:Ifthismethodischosen,thebackupcameraoptionmustbeenabledintheConfigurationSettingsScreen.
4-pin harness with yellow RCA jacks:
• Ifretainingthefactorybackupcameratothetouchscreendisplayisdesired,connecttheYellowRCAjacklabeled“Rearviewcamera”,totheYellowRCAjackfromthe12-pinor54-pinbackupcameraharness.
• DisregardtheYellowRCAjacklabeled“AUXvideo”,itwillnotbeusedinthisapplication.
3.5mm jack steering wheel control retention:
• The3.5mmjackistobeusedtoretainaudiocontrolsonthesteeringwheelcontrol.
• Fortheradioslistedbelow,connecttheincludedfemale3.5mmconnectorwithstrippedleads,tothemale3.5mmSWCjackfromthe5846harness.Anyremainingwirestapeoffanddisregard:
• Eclipse:Connectthesteeringwheelcontrolwire,normallyBrown,totheBrown/Whitewireoftheconnector.Thenconnecttheremainingsteeringwheelcontrolwire,normallyBrown/White,totheBrownwireoftheconnector.
• Metra OE:ConnectthesteeringwheelcontrolKey1wire(Gray)totheBrownwire.
• Kenwood or select JVC with a steering wheel control wire: ConnecttheBlue/YellowwiretotheBrownwire.
Note:IfyourKenwoodradioautodetectsasaJVC,manuallysettheradiotypetoKenwood.Seetheinstructionsunderchangingradiotype.
• XITE:ConnectthesteeringwheelcontrolSWC-2wirefromtheradiototheBrownwire.
• Parrot Asteroid Smart or Tablet:Connectthe3.5mmjackintotheAX-SWC-PARROT(soldseparately),andthenconnectthe4-pinconnectorfromtheAX-SWC-PARROTintotheradio.
Note:Theradiomustbeupdatedtorev.2.1.4orhighersoftware.
• Universal “2 or 3 wire” radio:Connectthesteeringwheelcontrolwire,referredtoasKey-AorSWC-1,totheBrownwireoftheconnector.Thenconnecttheremainingsteeringwheelcontrolwire,referredtoasKey-BorSWC-2,totheBrown/Whitewireoftheconnector.Iftheradiocomeswithathirdwireforground,disregardthiswire.
Note:Aftertheinterfacehasbeenprogrammedtothevehicle,refertothemanualprovidedwiththeradioforassigningtheSWCbuttons.Contacttheradiomanufacturerformoreinformation.
• For all other radios:Connectthe3.5mmjackintotheportontheradiodesignatedforanexternalsteeringwheelcontrolinterface.Refertothemanualprovidedwiththeradioifindoubtastowherethe3.5mmjackgoesto.
1.800.221.0932 | MetraOnline.com8
INSTALLING THE INTERFACE
Itishighlyadvisabletoreadthefollowingstepsbeforehand,toensureaclearunderstandingofwhatistobeexpected.Thefollowingstepsmustbedoneintheorderthattheyarenumbered.
With the vehicle completely off:
1. Connectthe16-pinharnesswithstrippedleadsintoport“B”inthetouchscreendisplay.
2. Connectthe5846harnesstothewiringharnessesinthevehicle.Theseharnessesaretheonesremovedinstep4ofdashdisassembly.Theninsertthe5846harnessintoport“A”inthetouchscreendisplay.Butdonotinstallthisharnessuntilexactlybeforestep1of“InitializingtheInterface”.Thisisatimedprocess.
3. Connectthe4-pinharnesswithyellowRCAjacksintoport“C”inthetouchscreendisplay.
4. Connectthehazardharnessintoport“D”inthetouchscreendisplay,thentothewiringharnessinthevehicle.Thisistheharnessremovedinstep3ofdashdisassembly.
5. Disregardport“E”,itwillnotbeusedinthisapplication.
6. Port“F”isanupdateportforfuturefirmwareupgrades.
A BC
EF D
REV. 2/21/2018 INST99-5846B 9
INITIALIZING THE INTERFACE FINAL ASSEMBLY
1. Securethecompletedassemblyintothedashusingthefactoryhardware.
2. Snaptheradiotrimpanelwithtouchscreendisplayoverthecompletedassembly,andthenreassemblethedashinreverseorderofdisassembly.
Attention!Iftheinterfacelosespowerforanyreason,thefollowingstepswillneedtobeperformedagain.
1. Refertostep2of“Installingtheinterface”.
2. Pressthepush-to-startbuttontostartthevehicle.
3. Programthekit:
a. Oncethetouchscreendisplayloadsup,selectthevehicletype;“FordF-1502013-2014”.
b. Waituntiltheradiocomeson,andthetouchscreendisplayshows “SWCConfigured*”.Thisprocessmaytakeupto3minutes.
Note:Ifthetouchscreendisplaydoesnotloadup,ortheradiodoesn’tcomeonwithin3minutes,and/orthetouchscreendisplaydoesnotshow“SWCConfigured*”,turnthevehicleoffanddisconnectthe5846harnessesfromport“A”inthetouchscreendisplay.Checkalltheconnections,reconnecttheharnessintothetouchscreendisplay,andthentryagain.
*Formodelswithsteeringwheelcontrols.
4. Testallfunctionsoftheinstallationforproperoperation,beforereassemblingthedash.
SYNC:
IfthevehicleisequippedwithSYNC,the99-5846Bcanretainthisfeature.
• ChangethesourceoftheradiotoAUX-IN.
• Pressthe“Info”buttononthetouchscreendisplaytoentertheSYNCmenu.Pressthe“HVAC”buttontogetbacktothemainmenu.
EXTRA FEATURES
1.800.221.0932 | MetraOnline.com10
• ThisistheHVACcontrolscreenwhichwillbedisplayedonthetouchscreendisplay.Thisisconsideredthemainscreen.
• Theupperlefttabwith(3)arrowswilltakeyoutotheHeated/Cooledseatsscreen,ifapplicable.
Note:ThisscreenwillalsoincludeHeatedSteeringifapplicable.
• TheupperrighttabwiththegeariconwilltakeyoutotheConfiguration Settingsscreen.
• Auto climate models:Theclimatecontrolswillfunctioninthesamemannerthattheydidwiththefactoryclimatecontrols.
• Manual climate models:Theclimatecontrolswillfunctioninthesamemannerthattheydidwiththefactoryclimatecontrols,yetviatouchscreenbuttonsinstead.Thetemperaturecontrolwilldisplayanumericalscale,with“LO”beingthecoldest,and“HI”beingthehottest:LO/1-9/HI
Note: The“Info”buttonwillonlybeshownifSYNCistoberetained.
Continuedonthenextpage
HVAC Control screen
Manualclimatecontrols
Automaticclimatecontrols
TOUCHSCREEN DISPLAY OPERATION
REV. 2/21/2018 INST99-5846B 11
TOUCHSCREEN DISPLAY OPERATION (CONT.)
• Backlight
•Fourslidebarscontrolthecolorofthebuttonsandtheback-lightintensity: Red/Green/Blue/Backlight
• Backup Camera
•Enable–Enablesthebackupcameraimagetothetouchscreendisplay
•Disable–Disablesthebackupcameraimagetothetouchscreendisplay(default)
• Steering Wheel Controls
•RemapButtons–Forremappingthesteeringwheelcontrolbuttons
•DualAssign–Fordualassigningthesteeringwheelcontrolbuttons(longbuttonpress)
•SelectRadio–Forautodetectingtheradio,orchangingtheradiotype
Configuration Settings screen
• System Configuration
•Firmwareversion
Touchscreen calibration
• Pressandholdtheuppertwosoftbuttonsoneithersideofthetouchscreenfor10seconds.
• Ascreenwillpopupaskingforyoutopressthetargetinthescreen.
• Afterpressingthetargetwithyourfinger,thecalibrationprocesswillbecomplete,andthescreenwilldisappear.
1.800.221.0932 | MetraOnline.com12
STEERING WHEEL CONTROL SETTINGS
Select Radio screen
* Note: IftheinterfaceshowsanAlpineradio,andyoudonothaveanAlpineradio,thatmeanstheinterfacedoesnotdetectaradioconnectedit,i.e.,anopenconnection.Verifythatthe3.5mmjackisconnectedtothecorrectsteeringwheeljack/wireintheradio.
** Note: TheAX-SWC-PARROTisrequired(soldseparately).Also,theParrotradiomustbeupdatedtorev.2.1.4orhigherthroughwww.parrot.com.
† Note: IfyouhaveaClarionradioandthesteeringwheelcontrolsdonotwork,changetheradiotypetotheotherClarionradiotype;sameforEclipse.
‡ Note: IfyouhaveaKenwoodradioandthetouchscreendisplayshowsaJVCradio,changetheradiotypetoKenwood.
Continuedonthenextpage
Eclipse(Type1)†
Kenwood‡
Clarion(Type1)†
Sony/Dual
JVC
Pioneer/Jensen
Alpine*
Visteon
Valor
Clarion(Type2)†
MetraOE
Eclipse(Type2)†
LG
• Toshowwhichbrandradiois“autodetected”totheinterface,pressthe“Autodetect”button.Theradiodetectedwillhaveafilledincircle.Iftheincorrectradioisshown,selecttheproperradio.
• Followingisalistofradiomanufacturersthattheinterfacepresentlyacknowledges.Othersmaybeaddedatalaterdate.Universal“2or3wire”radioscanshowupasanyoftheseradiomanufacturers.
Parrot**
XITE
Philips
JBL
REV. 2/21/2018 INST99-5846B 13
Remap Button screen Dual Assign screen
• Theinterfacehastheabilitytochangethebuttonassignmentforthesteeringwheelcontrolaudiobuttons,exceptVolume-UpandVolume-Down.Followthepromptsonthetouchscreendisplaytoremapthesteeringwheelcontrolaudiobutton(s)toyourliking.
Note: Theaftermarketradiomaynothaveallofthesecommands.Pleaserefertothemanualprovidedwiththeradio,orcontacttheradiomanufacturer,forspecificcommandsrecognizedbythatparticularradio.
• Theinterfacehasthecapabilitytoassigntwofunctionstoasinglebutton,exceptVolume-UpandVolume-Down.Followthepromptsonthetouchscreendisplaytoprogramthebutton(s)toyourliking.
Note: Seek-UpandSeek-DowncomeprogrammedasPreset-UpandPreset-Downforalongbuttonpress.
STEERING WHEEL CONTROL SETTINGS (CONT.)
1.800.221.0932 | MetraOnline.com14
REV. 2/21/2018 INST99-5846B 15
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
®
Metra recommends MECP certified technicians
IMPORTANTIf you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 2/21/18 INST99-5846B
I N S TA L L AT I O N I N S T R U C T I O N S99-5846B