2017 Cable Catalog - Linden Photonics - Catalog 2017.pdf · 2017 Cable Catalog Fiber Optic –...

2017 Cable Catalog Fiber Optic – Hybrid – Copper

Linden Photonics, Inc.Harmonizing Opposing Goals:

Strength & Flexibility

Copyright© Linden Photonics, Inc. 2017 V.3 Linden Photonics - One Park Drive - Suite 10 - Westford, MA 01886 - LindenPhotonics.com

TABLE OF CONTENTS

STFOC Optical Cables Page 3 Buoyant Optical Cables Page 6 High Strength Non-Buoyant Cables Page 9 Hybrid Cables Page 12 AVNOC Avionic Cables Page 15 RadHard Cables Page 18 STFOC Patchcords 1 Phase Stabilized STFOC Page 24 Precision Wound Spools Page 27

STFOC Optical Cable

Non-Kink

Crush Proof

Linden Photonics, Inc. Optical μpackaging

_______________________________________________________________________________ One Park Drive, Suite 10, Westford, MA 01886 978-392-7985; [email protected]

www.LindenPhotonics.com

S T F O C

Linden’s fiber optic cables are available for a variety of

underwater uses from munitions tethers to ROV controls to littoral water sensing. Using our patented cable jacket construction designed to protect the fiber in the harsh subsea environment, our cables are compact and rugged; flexible and strong. Custom configurations available.

Features • Patented Liquid Crystal Polymer (LCP) jacketing (US Patent No. 7,570,853) • 100% thermoplastic jacket eliminates need for metal & Kevlar • Non-KinkTM design prevents hockling • Lightweight – LCP density:1.4g/cm3 compared to inconel 625:8.4g/cm3 • Long continuous lengths >25km • Hermetic coating protects fiber from moisture/hydrogen/helium • Tight diameter tolerance • Abrasion resistant

Advantages

• Crush proof • Withstands high hydrostatic pressure • Thin, lightweight, yet strong • Non-corrosive • No hydrogen outgassing • Better moisture protection than carbon • Precision windable


________________________________________________________________________________ One Park Drive, Suite 10, Westford, MA 01886 978-392-7985; [email protected]


Singlemode Spec No. Part No. OD (mm) Attenuation @

1310nm (dB/km) Attenuation @

1550nm (dB/km) Tensile

Strength (lbs)

Weight(kg/km)

LINDEN-SPE-7034 1-SM-A-27-B-30 0.762 0.25 0.35 50 0.6LINDEN-SPE-7035 3-SM-A-35-B-38 0.965 0.25 0.35 50 0.9LINDEN-SPE-7039 7-3-A-55-Q-125 3.2 0.25 0.35 60 9.0LINDEN-SPE-7043 1-SM-A-35-Q-65 1.65 0.25 0.35 70 2.6LINDEN-SPE-7043 1-SM-A-35-Q-79 2.0 0.25 0.35 70 3.7LINDEN-SPE-7053 1-SM-A-21-B-24 0.600 0.25 0.35 30 0.4LINDEN-SPE-7057 3-SM-A-35-Q-87 2.2 0.25 0.35 70 3.9LINDEN-SPE-7063 1-SM-A-26-B-29 0.750 0.25 0.35 45 0.5LINDEN-SPE-7090 1-SM-A-17-B-20 0.500 0.25 0.35 20 0.4LINDEN-SPE-7092 1-V-A-27-R-35 0.900 0.45 0.4 50 1.0

Multimode (50/125) Spec No. Part No. OD (mm) Attenuation @



Strength (lbs)

Weight(kg/km)

LINDEN-SPE-7044 1-F-A-35-Q-65 1.65 2.5 3.5 70 2.6LINDEN-SPE-7044 1-F-A-35-Q-79 2.0 2.5 3.5 70 3.7LINDEN-SPE-7069 1-F-A-21-B-24 0.600 2.5 3.5 30 0.4LINDEN-SPE-7070 1-F-A-27-B-30 0.762 2.5 3.5 45 0.6LINDEN-SPE-7071 3-F-A-35-B-38 0.965 2.5 3.5 50 0.9

Multimode (62.5/125) Spec No. Part No. OD (mm) Attenuation @



Strength (lbs)

Weight(kg/km)

LINDEN-SPE-7046 1-I-A-35-Q-65 1.65 2.5 3.5 70 2.6LINDEN-SPE-7046 1-I-A-35-Q-79 2.0 2.5 3.5 70 3.7LINDEN-SPE-7072 7-I-A-55-Q-125 3.2 2.5 3.5 60 9.0

CONTACT LINDEN PHOTONICS FOR MORE DETAILED SPECIFICATIONS OR CUSTOM

REQUIREMENTS

Abrasion Resistant / Crush Protective Outer Layer

Hermetic LCP Layer

Commercial Grade Optical Fiber

Buoyant Cable Floats

Strong

Neutrally Buoyant




Buoyant Cable

Linden’s fiber optic cables are available for a variety of underwater uses from munitions tethers to ROV controls to littoral water sensing. Our lightweight, buoyant designs are customized to your needs. From neutrally buoyant designs to cable that will float on water we can customize your size, buoyancy and

strength. Using Linden’s patented cable jacket construction designed to protect the fiber in the harsh subsea environment, our cables are compact and rugged; flexible and strong.

Features

• From the thinnest, lightest 290μm cable to 13mm+ cables with multi-ton break strength • Density control for positive, neutral or negative buoyancy • Designs with or without Kevlar • Non-KinkTM design prevents hockling • Continuous lengths >5km • Hermetic coating protects fiber from moisture/hydrogen/helium • Abrasion resistant

Advantages • Crush proof • Non-corrosive • No hydrogen outgassing • Thin, lightweight, yet strong




Singlemode Spec No. Part No. OD (mm) Attenuation

@ 1310nm (dB/km)

Attenuation @ 1550nm

(dB/km)

Tensile Strength

(lbs)

Density (s.g.)

LINDEN-SPE-7089 1-FF-C-11-N1-11 0.290 1.0 1.0 10 1.13LINDEN-SPE-7040 1-SM-C-20-N1-20 0.500 0.35 0.25 10 0.95LINDEN-SPE-7073 1-SM-A-27-L-67 1.7 0.35 0.25 50 1.02LINDEN-SPE-7036 1-SM-A-27-O-47-L-75 1.9 0.35 0.25 250 1.01LINDEN-SPE-7055 1-SM-A-27-O-67-L-137 3.5 0.35 0.25 450 1.06LINDEN-SPE-7098 1-SM-A-27-O-55-FQ-137 3.5 0.35 0.25 750 0.99LINDEN-SPE-7059 1-SM-A-27-L-160-T-230-L-440-Q-520 13.2 0.35 0.25 2,750 1.03LINDEN-SPE-7060 3-SM-A-41-L-174-T-244-L-454-Q-534 13.6 0.35 0.25 2,750 1.03

Multimode (50/125) Spec No. Part No. OD (mm) Attenuation

@ 850nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Density (s.g.)

LINDEN-SPE-7074 1-F-C-5-20-N1-20 0.500 2.5 3.5 10 0.95LINDEN-SPE-7075 1-F-A-27-L-67 1.7 2.5 3.5 50 1.02LINDEN-SPE-7076 1-F-A-27-O-47-L-75 1.9 2.5 3.5 250 1.01LINDEN-SPE-7077 1-F-A-27-O-67-L-137 3.5 2.5 3.5 450 1.06LINDEN-SPE-7078 1-F-A-27-L-160-T-230-L-440-Q-520 13.2 2.5 3.5 2,750 1.03

Multimode (62.5/125) Spec No. Part No. OD (mm) Attenuation

@ 850nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Density (s.g.)

LINDEN-SPE-7093 1-I-A-27-O-47-L-75 1.9 2.5 3.5 250 1.01LINDEN-SPE-7091 1-I-A-27-O-67-L-137 3.5 2.5 3.5 450 1.06


REQUIREMENTS

Optional Ruggedized Outer Layer

Hermetic LCP Layer


Low Density (Buoyant) Material

Optional Kevlar Strength Members

High Strength Cable Thin

Lightweight

Rugged




High Strength Cable

Linden’s High Strength Cables are lightweight and flexible. Rugged exterior, lightweight design and long continuous lengths give us an edge over competing cables. Using Linden’s patented cable jacket construction designed to protect the fiber in the harsh subsea environment, our cables pull their weight.

Features

• Over 2,000lbs. breaking strength • Lightweight – LCP density: 1.4g/cm3 compared to inconel 625: 8.4g/cm3 • Continuous lengths >5km • Hermetic coating protects fiber from moisture/hydrogen/helium • Abrasion resistant

Advantages

• Long continuous lengths • Corrosion Resistant • No hydrogen outgassing • Thin, lightweight, yet strong • Crush proof




Singlemode Spec No. Part No. OD (mm) Attenuation

@ 1310nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight (kg/km)

LINDEN-SPE-7052 1-H-A-27-O-45-Q-75 1.9 0.35 0.25 250 3.6LINDEN-SPE-7050 1-SM-A-27-O-55-Q-95 2.4 0.35 0.25 450 6.8LINDEN-SPE-7097 1-SM-A-27-O-82-Q-147 3.7 0.35 0.25 1,200 27LINDEN-SPE-7082 1-SM-A-27-L-160-T-230-Q-310 7.9 0.35 0.25 2,750 41

Multimode (50/125) Spec No. Part No. OD (mm) Attenuation

@ 850nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight (kg/km)

LINDEN-SPE-7083 1-F-A-27-O-47-Q-75 1.9 2.5 3.5 250 3.6LINDEN-SPE-7084 1-F-A-27-O-67-Q-95 2.4 2.5 3.5 450 6.8

Multimode (62.5/125) Spec No. Part No. OD (mm) Attenuation

@ 850nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight (kg/km)

LINDEN-SPE-7085 1-I-A-27-O-47-Q-75 1.9 2.5 3.5 250 3.6LINDEN-SPE-7086 1-I-A-27-O-67-Q-95 2.4 2.5 3.5 450 6.8LINDEN-SPE-7087 1-I-A-27-L-160-T-230-Q-310 7.9 2.5 3.5 2,750 41


REQUIREMENTS

Abrasion resistant / Crush Protective Outer Layer

Hermetic LCP Layer


Kevlar Strength Members

Hybrid CablesRugged & Durable

Buoyant

Thin & Lightweight




Hybrid Cables

Linden Photonics introduces hybrid cables to its expanding product line. Copper and fiber elements in a lightweight, yet strong and robust tether cable. Linden can customize your size, buoyancy and strength; from neutrally buoyant designs to extremely thin cables with various conductor offerings and fiber types available. Linden’s patented cable jacket construction is designed to protect delicate fibers in the harsh subsea environment. Our cables are compact and rugged; flexible and strong.

Features

• Rugged, durable patented STFOC fiber optic elements • Hermetic coating protects fiber from moisture/hydrogen/helium • Buoyant designs • Thin wall insulation = thinner/lighter cables • Fiber strength members = lighter cables • Vectran fiber available offering less self-abrasion and longer service life

Advantages

• Virtually crush proof • Non-corrosive • Thin, lightweight, yet strong • Withstands high hydrostatic pressure




Specifications

Spec No. Part No. OD (mm) Fiber Type Conductor Type Tensile Strength (lbs)

LINDEN-SPE-7107* 2-CU-2-FO-O-155-Q-235 6.0 2 x Singlemode 2 x 24 AWG 2,100LINDEN-SPE-7104 2-CU-1-FO-O-155-Q-250 6.4 1 x Singlemode 2 x 20 AWG 880LINDEN-SPE-7120 3-CU-2-FO-O-280-Q-320 8.1 2 x Singlemode 2 x 22 AWG 5,500LINDEN-SPE-7121 8-CU-12-FO-Q-350 8.9 12 x Singlemode 8 x 18 AWG -LINDEN-SPE-7122 2-CU-2-FO-O-155-Q-390 9.9 2 x Singlemode 2 x 16 AWG 2,200LINDEN-SPE-7123 2-FO-2-CU-T-320-Q-400 10.2 2 x Singlemode 2 x 14 AWG 800LINDEN-SPE-7103 4-CU-4-FO-O-155-Q-420 10.7 2 x Singlemode 4 x 13 AWG 1,300LINDEN-SPE-7124* 3-SM-4-CU-O-55-FQ-454 11.5 2 x Singlemode +

1 x Multimode 2 x 18 AWG 3,200

LINDEN-SPE-7102 4-CU-4-FO-O-155-Q-470 11.9 4 x Singlemode 4 x 16 AWG 15,400LINDEN-SPE-7100* 2-CU-2-FO-O-155-Q-500 12.7 2 x Singlemode 4 x 14 AWG 2,100LINDEN-SPE-7110* 1-SM-3-CU-Q-328-R-500 12.7 1 x Singlemode 3 x 16 AWG 450LINDEN-SPE-7106* 4-CU-2-FO-O-155-Q-550 14.0 2 x Singlemode 4 x 13 AWG +

2 x 19AWG 1,573

LINDEN-SPE-7109 5-CU-2-FO-O-155-Q-550 14.0 2 x Singlemode 5 x 16 AWG 15,400LINDEN-SPE-7125* 2-CU-2-FO-Q-557 14.1 2 x Singlemode 2 x 16 AWG 1,200LINDEN-SPE-7101 4-CU-4-FO-O-175-Q-650 16.5 4 x Singlemode 4 x 16 AWG 23,100LINDEN-SPE-7126 2-FO-12-CU-T-535-FQ-709

18.0 2 x Singlemode 2 x 14 AWG +

10 x 23 AWG (TP) 3,600

LINDEN-SPE-7111* 3-CU-2-FO-S-730 18.5 2 x Singlemode 3 x 18 AWG 2,200LINDEN-SPE-7127 3-SM-1-MM-6-CU-Q-410-Q-760 19.3 3 x Singlemode +


LINDEN-SPE-7113 3-FO-3-CU-O-630-DD-770 19.6 3 x Singlemode 3 x 16 AWG 35,200LINDEN-SPE-7108* 8-CU-4-FO-O-155-Q-910 23.1 4 x Singlemode 8 x 18 AWG 15,400LINDEN-SPE-7112* 4-CU-4-FO-S-1210 30.7 2 x Singlemode +


*Denotes Buoyant Design

CONTACT LINDEN PHOTONICS FOR MORE DRAWINGS, DETAILED SPECIFICATIONS OR

CUSTOM REQUIREMENTS

AVNOC Avionic Cable

Simple Design

Improved Performance




AVNOC

Linden’s avionic grade fiber optic cables are designed for the most rigorous avionic environment. We design our avionic cables to survive the perils of aircraft confines such as high temperature, high vibration and extreme flexing. Using our patented cable jacket construction designed to protect the fiber from harsh mechanical conditions; our cables are stronger, lighter and smaller than existing flight qualified cables.

Features

• AS5382 Qualified • Qualified for F-35 • Simple 3-layer extruded construction • High temperature • Lighter design • Bend insensitive 9µm singlemode compatible • No carbon layer needed

Advantages • No Kevlar • Non-Wicking • Non-Crush • Non-Kink • Lower Cost • Easier to terminate




• Better fatigue performance than carbon coated fibers

Singlemode Spec No. Part No. Fiber Type OD

(mm) Attenuation @ 1310nm

(dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight (kg/km)

LINDEN-SPE-7033 1-D-A-27-M-66

Draka BendBright Elite w/ silicone buffer

1.7 1.5 1.4 45 3.1

Multimode Spec No. Part No. Fiber Type OD

(mm) Attenuation

@ 850nm (dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight (kg/km)

LINDEN-SPE-7041 1-E-A-27-M-66

Draka Graded Index 50/125/242 silicone buffer

1.7 6 4 45 3.1


REQUIREMENTS

Abrasion Resistant / Crush Protective High Temperature Outer Layer

Hermetic LCP Layer

Commercial Grade Optical Fiber With Silicone Buffer

Radiation Hardened Optical Patchcords

Optical and Mechanical

Performance to 20MRad




Radiation Hardened

Linden’s RadHard fiber optic patchcords provide a complete solution where a robust fiber optic link is needed in a harsh, high radiation environment. A wide variety of cable constructions are available to meet your specific requirements including our patented Non-KinkTM cable. Tested as per European Space Agency - ESCC Basic Specification No. 2263010

Features • Maintain optical and mechanical

performance to >20MRad Tested to ESCC Spec No. 2263010

• Tested to NASA-STD-8739.5 • Tested to SAE AS5382 • No carbon layer needed

Advantages

• No Kevlar • Thermally stable • Preconditioning prevents jacket shrinkage • Non-Crush • Non-Kink




Singlemode Spec No. Part No. Fiber Type OD (mm) Typical Connector

Loss (dB) Tensile Strength (lbs)

LINDEN-SPE-7079 1-M-A-27-J-47-**-L RadHard Singlemode 1.2 <0.2dB 50LINDEN-SPE-7079 1-M-A-27-J-55-**-L RadHard Singlemode 1.4 <0.2dB 50LINDEN-SPE-7079 1-M-A-27-J-65-**-L RadHard Singlemode 1.65 <0.2dB 50LINDEN-SPE-7079 1-M-A-27-J-79-**-L RadHard Singlemode 2.0 <0.2dB 50LINDEN-SPE-7079 1-M-A-27-J-87-**-L RadHard Singlemode 2.2 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-36-**-L RadHard Polyimide .900 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-47-**-L RadHard Polyimide 1.2 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-55-**-L RadHard Polyimide 1.4 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-65-**-L RadHard Polyimide 1.65 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-79-**-L RadHard Polyimide 2.0 <0.2dB 50LINDEN-SPE-7068 1-EE-A-27-J-87-**-L RadHard Polyimide 2.2 <0.2dB 50

Multimode Spec No. Part No. Fiber Type OD (mm) Typical Connector

Loss (dB) Tensile Strength (lbs)

LINDEN-SPE-7088 1-N-A-27-J-35-**-L RadHard MM (50/125) .900 <0.2dB 50LINDEN-SPE-7088 1-N-A-27-J-47-**-L RadHard MM (50/125) 1.2 <0.2dB 50LINDEN-SPE-7088 1-N-A-27-J-55-**-L RadHard MM (50/125) 1.4 <0.2dB 50LINDEN-SPE-7088 1-N-A-27-J-65-**-L RadHard MM (50/125) 1.65 <0.2dB 50LINDEN-SPE-7088 1-N-A-27-J-79-**-L RadHard MM (50/125) 2.0 <0.2dB 50LINDEN-SPE-7081 1-O-A-27-J-47-**-L RadHard MM (62.5/125) 1.2 <0.2dB 50LINDEN-SPE-7081 1-O-A-27-J-55-**-L RadHard MM (62.5/125) 1.4 <0.2dB 50LINDEN-SPE-7081 1-O-A-27-J-65-**-L RadHard MM (62.5/125) 1.65 <0.2dB 50LINDEN-SPE-7081 1-O-A-27-J-79-**-L RadHard MM (62.5/125) 2.0 <0.2dB 50LINDEN-SPE-7081 1-O-A-27-J-87-**-L RadHard MM (62.5/125) 2.2 <0.2dB 50


REQUIREMENTS

**-Connector Type (AVIM-PC, AVIM-APC, FC-PC, FC-APC, ST-PC) –L designates length up to 5m

High Temperature / Crush Protective Outer Layer

Radiation Resistant Hermetic LCP Layer

RadHard Optical Fiber

PatchcordsSubSea

Avionic

Space




Patchcords

Harsh environment fiber optic patchcords for applications demanding high performance. Whether deep beneath the ocean surface where crush resistance and fish bite protection is imperative, near the surface where buoyancy is needed, in the air, or outer space, Linden can keep you connected. A combination of Linden’s patented cable constructions and industry leading interconnect solutions provide a top-notch solution for your connectivity needs.

Features

• Rugged, durable, patented STFOC fiber optic cables • Hermetic coating protects fiber from moisture/hydrogen/helium • Crush proof, non-kink cables • Buoyant/Avionic/High Temperature/RadHard designs • Thin wall insulation = thinner/lighter cables • Various connector types available

Applications

• Subsea • Surface • Avionic • Space

Lancer DRY HP Series




Ordering Information AAAAA-BBB-CCC-DD A = Fiber Type / B = Connector 1 / C = Connector 2 / D = Length (m)

SubSea – Fiber Type 70436 Non-Kink Singlemode 1.65mm LINDEN-SPE-7043 70432 Non-Kink Singlemode 2.00mm LINDEN-SPE-7043 70445 Non-Kink Multimode (50/125) 1.65mm LINDEN-SPE-7044 70446 Non-Kink Multimode (50/125) 2.00mm LINDEN-SPE-7044 70466 Non-Kink Multimode (62.5/125) 1.65mm LINDEN-SPE-7046 70467 Non-Kink Multimode (62.5/125) 2.00mm LINDEN-SPE-7046

Surface – Fiber Type 70361 Buoyant High Strength Singlemode 1.9mm LINDEN-SPE-7036 70761 Buoyant High Strength Multimode (50/125) 1.9mm LINDEN-SPE-7076 70931 Buoyant High Strength Multimode (62.5/125) 1.9mm LINDEN-SPE-7093 70551 Buoyant High Strength Singlemode 3.5mm LINDEN-SPE-7055 70771 Buoyant High Strength Multimode (50/125) 3.5mm LINDEN-SPE-7077 70911 Buoyant High Strength Multimode (62.5/125) 3.5mm LINDEN-SPE-7091

Avionic – Fiber Type 70331 AVNOC Singlemode 1.6mm LINDEN-SPE-7033 70411 AVNOC Multimode (50/125) 1.6mm LINDEN-SPE-7041

Space – Fiber Type 70791 RadHard Singlemode 1.65mm LINDEN-SPE-7079 70792 RadHard Singlemode 2.00mm LINDEN-SPE-7079 70881 RadHard Multimode (50/125) 1.65mm LINDEN-SPE-7088 70882 RadHard Multimode (50/125) 2.00mm LINDEN-SPE-7088 70811 RadHard Multimode (62.5/125) 1.65mm LINDEN-SPE-7081 70812 RadHard Multimode (62.5/125) 2.00mm LINDEN-SPE-7081

SubSea/Surface – Connector Type

LF1 Lancer FC-DRY HP Singlemode LF2 Lancer FC-DRY HP Multimode (50/125) LF3 Lancer FC-DRY HP Multimode (62.5/125) LS1 Lancer ST-DRY HP Singlemode LS2 Lancer ST-DRY HP Multimode (50/125) LS3 Lancer ST-DRY HP Multimode (62.5/125) XXX Other

Avionic/Space – Connector Type AV1 Diamond AVIM Singlemode AV2 Diamond AVIM Multimode

**Other Cable Types and Connectors available upon request**

Phase Stabilized STFOC Cost Effective




Phase Stabilized STFOC

Phase Stabilized STFOC is a specialty fiber which minimizes the temperature dependence of transmission delay time. It is used for transmitting base band signals in synchronized measurement systems. The fiber is buffered with Linden Photonics’ patented Liquid Crystal Polymer jacketing, a material with negative thermal expansion coeficient. Kevlar strength members are also available.

Features

• Low cost • Negative Thermal Coefficient of Delay (TCD) Available

*NEW PHASE STABLE OPTICAL FIBER, M. Bousonville, et al, 2012 (http://accelconf.web.cern.ch/accelconf/BIW2012/papers/mopg033.pdf)

Advantages The STFOC shows excellent thermal stability. The Non-Kink STFOC version is the first known cable which shows a negative TCD.




Singlemode Description Part No. Fiber Type OD

(mm) Attenuation @ 1310nm

(dB/km)


(dB/km)

Tensile Strength

(lbs)

Weight(kg/km)

STFOC 1-3-A-27-B-30-TCD SinglemodeOFS Allwave Flex

0.762 0.45 0.35 50 0.6

Non-kink STFOC

1-3-A-27-O-45-L-79-TCD SinglemodeOFS Allwave Flex

1.9 0.45 0.35 250 3.0

*NEW PHASE STABLE OPTICAL FIBER, M. Bousonville, et al, 2012 (http://accelconf.web.cern.ch/accelconf/BIW2012/papers/mopg033.pdf)


REQUIREMENTS

Precision Wound Spools Tangle Free

Internal Deployment



www.LindenPhotonics.com LINDEN-SBM-6007

PRECISION WOUND SPOOLS

These precision-wound optical fiber packs are designed for use in such critical applications as submarine-launched buoys, underwater munitions and terrestrial robots to provide a capability for two-way, high-bandwidth communications. Our standard spools are made from either Strong Tether Fiber Optic Cable (STFOC) - with a >50 lbs breaking strength and slim 0.03” OD - or bare optical fiber. These spools are designed with one twist per turn of cable so no kinking issues develop as a result of rapid payout. Fiber pays out from the inside of the spool so spool remains stationary during deployment. Both come standard as singlemode or can be modified with multimode fiber.

STANDARD SPOOL SIZES – STFOC Cable Spool ID Spool OD Spool Length Cable Length P/N

0.75” 3” 6” 800m 1-3-A-27-B-30-0.75-3-61.5” 3.7” 10” 3km 1-3-A-27-B-30-1.5-3.7-105” 10” 8” 14km 1-3-A-27-B-30-5-10-8

STANDARD SPOOL SIZES – Bare Fiber Spool ID Spool OD Spool Length Cable Length P/N

0.75” 3” 6” 10km 1-3-N1-0.75-3-61.5” 3.7” 10” 22km 1-3-N1-1.5-3.7-10

Custom Spools In addition to our standard, cost efficient precision wound spools, we are able to leverage our quality team of engineers to design and build custom spools with specialty fiber or cable in custom sizes to meet your exacting requirements. Some of our custom design capabilities include;

• Externally deployable spools

• Buoyant cables • High strength cables • Specialty optics • Custom Sizes • Custom designed canisters

Contact your local Linden Photonics Representative for more information

8

1 Park Drive, Unit 10, Westford, MA 01886phone: (978) 392-7985email: [email protected]: LindenPhotonics.com

Linden Photonics Inc.

2017 Cable Catalog - Linden Photonics - Catalog 2017.pdf · 2017 Cable Catalog Fiber Optic –...

Documents

Transcript of 2017 Cable Catalog - Linden Photonics - Catalog 2017.pdf · 2017 Cable Catalog Fiber Optic –...