20161204-CV QC Engineer Le Dinh Hai
Transcript of 20161204-CV QC Engineer Le Dinh Hai
PTSC Key Personnel – Piping QC Page 1 of 10
CURRICULUM VITAE
POSITION APPLIED: Welding/ Piping QC Engineer
PROFESSIONAL EXPERIENCE: (TOTAL 4 EXPERINCE YEARS)
From August 10/2016 to Present
Company : PETROVIETNAM ENGINEERING (PVE Malaysia) Position : Welding/ Piping QC Engineer Project : Package 11of Refinery And Petrochemicals Integrated Development (RAPID) Client : Petroliam Nasional Berhad (PETRONAS) Contractor : Samsung Engineering (Korea) Sdn. Bhd Address : Johor, Malaysia.
From August 14, 2015 to 09/2016
Company : PetroVietNam Technical Services Corporation (PTSC) Position : Welding/ Piping QC Team Leader Project : SMP-9 Package, Zone 3 of Nghi Son Refinery Project. Client : Nghi Son Refinery and Petrochemical Limited Liability Company Contractor : GS ENG’G & CONSTRUCTION Address : Nghi Son-Thanh Hoa Provide- Viet Nam.
From Apr, 2015 to August 14, 2015
Company : PetroVietNam Technical Services Corporation (PTSC) Position : Painting & Wrapping QC / Supervisor. Project : Crude Oil line & Underground piping package – Zone 3 of NSRP Client : Nghi Son Refinery and Petrochemical Limited Liability Company. Contractor : GS ENG’G & CONSTRUCTION Address : Nghi Son- Thanh Hoa Province- Viet Nam.
FULL NAME: LE DINH HAI Address: Hau Thanh Commune, Yen Thanh
district, Nghe An province Phone : (+84) 973971597 Email : [email protected]
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 2 of 10
From Feb 20, 2015 to August 14, 2015
Company : PetroVietNam Technical Services Corporation (PTSC) Position : Welding, Piping QC inspector Project : Crude Oil line & Underground piping package, Zone 3 of NSRP Client : Nghi Son Refinery and Petrochemical Limited Liability Company. Contractor : GS ENG’G & CONSTRUCTION Address : Nghi Son- Thanh Hoa Province- Viet Nam.
From Sep 25, 2014 to Feb 20, 2015
Company : PetroVietNam Technical Services Corporation (PTSC) Position : Welding Piping QC inspector/ Supervisor Project : Underground piping – B500 package, Zone 2 of Nghi Son Refinery Project. Client : Nghi Son Refinery and Petrochemical Limited Liability Company. Contractor : SK ENG’G & CONSTRUCTION Address : Nghi Son- Thanh Hoa Province- Viet Nam.
From Jan 15 , 2014 to Sep 01, 2014
Company : Doosan Heavy Industries Vietnam Co., Ltd Position : In-Charge Welding Engineer. Project : Pressure Vessel & Heat Exchanger vessel of Nghi Son Refinery Project Client : JGC ENG’G & CONSTRUCTION Address : CPE Shop/ DOOSAN-VINA.Dung quat,Quang Ngai Province- Viet Nam
From Jun 15 , 2013 to Sep 01, 2014
Company : Doosan Heavy Industries Vietnam Co., Ltd Position : In-Charge Welding Engineer. Project : Pressure Vessel & Heat Exchanger vessel -RABISH Project Client : GS ENG’G & CONSTRUCTION Address : CPE Shop/ DOOSAN-VINA.Dung quat, Quang Ngai Province- Viet Nam
DUTIES AND RESPONSIBILITIES.
Duties and Responsibilities: PetroVietnam Engineering (PVE Malaysia) 10/2016-Present
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 3 of 10
- Assignment and control of WPS / PQR / WQT on wide range of stainless and carbon steel
alloys and associated filler metals / fluxes and shielding gases in compliance with ASME IX,
and AWS D1.1 using GTAW, FCAW, SAW and SMAW processes. Meeting with Samsung
contractor for set up QA/QC system of package.
- Interview the Fitter, laminator and welder.
- Prepare to welder qualification test (WQT for 6G).
- Be trained the Glass-Fiber Reinforced Plastic(GRP-GRE) Pipeline and Piping System.
- Preparing Welder Performance Qualification Test.
- Preparing and submit Material Approval Request (MAR) for Welding Consumable.
- Preparing and submit MAR for Wrapping Coating of underground CS Pipe
- Preparing and submit Method Statement for Underground piping.
- Preparing and submit Method Statement for Wrapping.
- Preparing and submit Method Statement for Pressure Testing.
- Estimating to Welding consumable of project.
- Preparing and submit Inspection & Test Plan (ITP) for Under Ground Carbon Steel Piping
- Preparing and submit Inspection & Test Plan (ITP) for Under Ground GRE/GRP Piping
- Preparing and submit Welding Consumable Storage Procedure.
- Fit up and Visual inspection for CS and GRE underground piping.
- Weekly meeting with contractor and client about QA/QC.
- Preparing test package and submit to client approval.
- Line check and closed punch before hydrotest.
- Prepare to hydrotest, checking hydrotest tool and certificate.
- Witnessing of vacuum and hydro testing.
- Managing inspection testing and calibration activities.
Duties and Responsibilities: PetroVietNam Technical Services Corporation (PTSC)(9/2014-
9/2016)
- Representing client at site and conferring with Client and local authorities for all site related
activities and problems.
- QA/QC team leader of above ground and underground piping.
- Arranging and evaluating the employee’s training's.
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 4 of 10
- Inspection of welding consumables (electrodes, rods and wires) and their conformance with
mill test and batch test certificates
- Ensuring the application and where not already arranged in the planning phase, the issue of
suitable procedures for the definition of working methods and site regulations.
- Checking that procedures defined for site activities are applied.
- Internal and external surveillance audits for the ISO certification of the company.
- Checking construction progress on a weekly basis, identifying any problem areas and
requesting the Contractor involved to take action, where required.
- Ensuring the preparation of work progress reports.
- Submit daily reports on project status to Project Management Team.
- Conducting daily meeting with site staff to organize work for the day/next day.
- Manage and resolve construction and interface issues or conflicts as they arise.
- Participate in Job Hazard Analyses and Attend safety toolbox meetings on a regular basis
with contractors' work teams.
- Review and evaluates all project QA/QC requirements and specifications, project designs,
construction drawings, procedures, methodologies, and material specification.
- Conduct material inspection in accordance to the specifications, drawings and codes provided
by the customer.
- Verify the accuracy of piping system installed base from isometric drawings and in P&ID.
- Familiar with international standards (ASME / ASTM / AWS / API / ISO) and Specification.
- Knowledge of executing all NDT & DT activities (RT / UT / PT / MT / PWHT / Hardness /
PMI / Pneumatic / vacuum test)
- Surveillance check on consumables storage/Baking/issuance and its documentations.
- Regularly assess the effectiveness of the quality on the project and provide report to the
Management on quality performance and areas of improvement associated with inspection
activities.
- Checks and identifies piping materials that are being fabricated and properly installed to
determine their conformity to the requirements of the isometric drawings and materials
specification.
- Conduct field inspections works on regular basis such as Fit-up, visual check, dimensional
check, witnessing of all piping and mechanical testing.
- Inspect all work to ensure quality construction and fabrication workmanship and coordinate
with client representatives for all field testing and inspections.
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 5 of 10
- Maintain records are up to date, accurate and accessible through daily reviews of all welding
related forms. This will include daily weld reports, NDT requests, welder performance
records, etc.
- Ensure traceability, where required, is maintained and documented on relevant isometrics &
traceability logs.
- Prepare test package documentation for hydrotest and golden joint.
- Line check and issue internal punch list for test package,
- Witness hydrostatic and pneumatic tests on piping.
- QC inspection for Wrapping (underground piping).
- QC inspection for painting of joint and touch up painting for underground piping.
- Inspect materials and equipment as applicable to ensure compliance with project
requirements for proper handling, storage and protection at project facilities and/or
construction site.
- Monitors Contractor’s Quality Systems, records and Quality Personnel for compliance with
requirements.
- Perform piping inspection and pre-test punch list and ensure all Test Pack piping and piping
system component is completed completely, clear NDT and visual outstanding.
- Carried out inspection of site along with client’s representative to ensure that the
requirements of materials are obey with the specification. Establish procedure and control
monitor to keep attain high standard.
- Monitoring for closed punch list status to hand over.
- Establish interfaces with Construction Department and Client with regards to all installation
issue concerning progress, schedules, work discrepancies, materials issues, quality control
issues, and safety issues are met on time.
- Estimating to Welding consumable for project.
- Prepare to welder qualification test (WQT for 6G).
Product: UNDERGROUND AND ABOVEGROUND PIPING.
(Pipe rack, Pipe sleeper, Crude oil pipe line, )
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 6 of 10
1. Pipe Sleeper/ Pipe rack
Duties and Responsibilities: Doosan Heavy Industries Vietnam Co., Ltd (6/2013-9/2014)
- Preparing manufacturing procedure & Control the document.
- Purchase requirement for Material.
- Preparing Welding Procedure Specification (WPS)
- Preparing Post Weld Heat Treatment Procedure (PWHT)
- Preparing Work Instruction.
- Preparing Weld map.
- Estimating to Welding consumable of project.
- Preparing Repair welding procedure.
- Preparing Welding Consumable Storage Procedure.
- Witnessing of Fit-Up, Welding, Pre-Heating, Stress relieving, Penetrant test, Magnetic Test,
Radiography testing, Hardness Test, PMI, Ultrasonic test, hydro test
- To Resolve construction and interface issues or conflicts as they arise.
- Training for Worker and new Employees.
- Plan and monitor Fabrication Operation Weekly Plan, Fabrication Operation Monthly plan.
- Monitor products standard and implement quality control program.
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 7 of 10
- Organizing and controlling the production resources,
- Contact to abroad client,
- Analyze, improve, optimize to efficiently use material, labor, equipment... to finish orders on
time, increase productivity, save cost;
- Close cooperation between and open communication with production, maintenance and
quality departments as well as other departments in the company
- To organize the Project team and resolve interface problems,
- To manage the performance of the overall Project activities with the assigned members of
engineering, procurement, project control, QA/QC, HSE, construction, and other relevant
teams;
- To approve any other documents/ drawings prior to transmit to Company for approval;
- To ensures fabrication work is performed in accordance with Project contractual and specification requirements,
- To be responsible for technical input and work management of sub-contractors.
- Internal and external surveillance audits for the ISO, ASME U certification of the company.
- Review all documents, drawings, procedures to ensure that the construction work performed
in accordance with requirements, etc.
- To Maintain, control and administer issuance of internal and customer required documents as
related to Weld Maps, WPS / PQR / WPAR. Issuance of these documents will require
familiarity with customer specifications as well as the requirements of ASME VIII, IX.
- To Assist Quality Control / Shop Floor supervision in quality improvement initiatives and the
review of statistical data to determine and implement ways and means to continually improve
in reduction of weld repairs and weld rework. Review RT, LPT, UT or other NDE
inspections as required for continued process improvements.
Product: CHEMICAL PRODUCTION EQUIPMENT(CPE)
(Pressure vessel, Heat exchange, Tank, Tower)
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 8 of 10
1. Pressure vessel (Column)
2. Tower
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 9 of 10
3. Heat exchange
PROFILE (See Attached #1)
Qualification:
From 2008 to June 2013 : Da Nang University of Science and Technology
Major : Mechanical Engineering
Year of graduation : 2013
Degree classification : Good
GPA of max4.0 : 2.83
Mode of study : Full-time
OTHER ADDITIONAL SKILLS & TRAINING COURSES:
Foreign Language Skills
Advanced knowledge and skill in English.
Computer Skills
Advanced knowledge and skill in Auto Cad 2008 2D,3D,
CURRICULUM VITAE LE DINH HAI
Key Personnel – Piping/ Welding QC Engineer Page 10 of 10
Literate in Microsoft Office application, ProE 5.0, (Specially Excel)
Literate in general computing & the Internet
PERSONAL DATA
Name : Le Dinh Hai.
D.O.B : 28th May 1990.
Native : Hau Thanh Village – Yen Thanh District – Nghe An Province.
Sex : Male.
Marital Status : Married.
Health : Excellence.
Nationality : Vietnamese.
Tel : (+84) 973.971.597
Email : [email protected]
Language : Vietnamese and English.
PROJECT HISTORY
No. MY COMPANY CONTRACTOR CLIENT
NAME LOGO NAME LOGO NAME LOGO
1 DOOSAN-VINA JGC ENG’G &
CONSTRUCTION
Nghi Son Refinery Project
2
PetroVietNam Technical Services
Corporation (PTSC)
JGCS Consortium Nghi Son Refinery Project
3 PETROVIETNAM
ENGINEERING (PVE Malaysia)
Samsung Engineering
(Korea) Sdn. Bhd
PETRONAS (RAPID Project)